Not able to view the information of the person through forms

Similar Questions

• Not able to view the files in Windows XP after installing Ubuntu 10.10.

  Original title: problem opening of windows.

  I installed ubuntu 10.10 on my system unfortunately it took total hard drive in a single partition and now I am not able to access microsoft windows. What to do there are a lot of important files in that partition. I am not able to view the files that have been seen in windows. Please suggest.
  concerning
  Hari

  Hi hari,.

  It seems that Ubuntu has supported the installation of Windows. At this point, I would recommend youto contact support Ubuntu uninstall Ubuntu. This should return Windows XP & you can access your files.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't open downloaded files, and I'm not able to view the items in the downloaded files.

  -Very well, every time I download a file can't open it and I view the files it contains. Say I have download a mixtape from a Web site. When it is done and get in my downloads folder, the file type is one of my programs and I can't view the contents of the downloaded file.

  Hi Ryan,

  (a) what web browser do you use?

  (b) have you been able to open this type of file before? You get a specific error message?

  (c) does it happen with every file download or it?

  Please provide the information above to understand the question better; the following steps are worth a try:

  Downloaded file is possibly corrupted. In this case, you will not be able to open it. Download the file again. That might solve the problem.

  Security software may be blocking or impeding the file to open, first of all, let us disable the security software and test

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: Download the file to a different location (on the desktop) and test

  Step 3: You can uninstall and reinstall the program that opens this file type.

  Note: You can check with the manufacturer of program for ways to reinstall and activate the software.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm not able to view the video content in Firefox from any Web site.

  When you try to view the video content on youtube, I get the following message. "An error has occurred. "Please try again later". Another Web site simply do not load the video clip.

  Hello eddie, it is most likely a problem in the context of the recent update of the adobe flash plugin, please see the following article for common solutions: 11.3 Flash does not load video in Firefox

• Not able to view the summary tabs

  I am a beginner in the use of the VM.

  I just installed VM Server 2 on my host computer running Windows 2003 R2 SP2. Also, I created a VM 1 machine, but do not have any BONE to the guest computer.

  However, when I run the virtual computer, I am able to see the tabs, summary, events, tasks, but when I click on the machine to the virtual computer that I created, I don't see anything in the command window.

  Also, when I go to the top, I am more able to see the summary and the other tabs.

  Only the section of the page top left inventory is visible.

  Please help on what I should do!

  Thank you.

  Kamal

  Let me guess, you're under firefox 4 right?  Yes, there is a problem with firefox 4.  Been filed as a bug on the bug tracker:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=651799

  If register and confirm what happen you too out there so it gets more attention.  Now install the IE addon for firefox 4 and adjust any vmware interfaces web server using the rendering engine of IE instead.

• Not able to view the images in the CompactFlash card.

  Original title: "Scan and difficulty of...» "on external flash hidden all files

  I have a 2 GB CompactFlash card in my digital SLR that when I plugged my PC gave me the message, "analyze and difficult external drive...". "I foolishly chose the option"Recommended", now all 439 MB of images is not visible.  Empty the DCIM folder, where the images are usually stored.  If I do a properties of the disc, it shows 439 MB used space and 1.4 GB of free space.  I've never had a problem before displaying my images, what happened?  I ran Pandora Recovery on the drive, but it can't find some files that had been deleted off months ago the unit.

  Is there a way to recover files that are obviously there, but not displayed?

  OK, updated...  I inserted the card memory flash on a XP Pro machine and under properties > tools > error checking, I chose "Automatically fix file system errors" and now I have a folder called "Found.000" containing all the missing files, however they are all named "FILExxx.CHK", where "xxx" is a sequential number.  Then I was on them batch file renaming to .jpg and I have my pictures back.  All 356 of them...

  Thanks Microsoft for scaring the heck out of me, what is the problem with the 'Scan and Fix '?  It seems that I'm not the only person who has experienced this problem before with Windows 7...

• Not able to view the pdf on the web through a link on the site

  I get a black screen, then the message: 'there is a problem with Adobe Acrobat Reader.  If it is running, please exit and try again. 1074724867:3 ".

  Have re-installed drive X, worm 10.1.3

  Have reset preferences for the internet to display in the window, allow quickly..., made it several times.

  OS Win 7 Ultimate, IE 8

  This done over and over again, at a total loss.

  Eureka!  Unlike all (?) solutions support unchecking the checkbox in the preferences: change preferences > Internet > UNCHECK "Display IN the browser" now I am ABLE to display the PDF, opens in the player window.  THIS MARKET!

• After you have created the encrypted table, I'm not able to view the records.

  Cheap DBA
  
  I created encrypted tablespace and table as follows.
  
  Step 1 - change the file sqlnet.ora as follows
  --------------------------------------------
  
  ENCRYPTION_WALLET_LOCATION =
  (SOURCE = (METHOD = FILE) (METHOD_DATA =
  (DIRECTORY = C:\ora11g\app\admin\AMAN\encryption_wallet\)))
  
  
  Step 2 - set the encrypted key
  ------------------------------
  Run the following at the command prompt:
  ------------------------------------------
  create a portfolio orapki - C:\ora11g\app\admin\AMAN\encryption_wallet portfolio - pwd abcd1234 auto_login
  
  Step 3 - create the encrypted Tablespace
  ------------------------------------
  CREATE TABLESPACE encrypted_ts
  DATAFILE 'C:\ora11g\app\oradata\AMAN\DATAFILE\encrypted_ts01.dbf' SIZE 128K
  AUTOEXTEND ON NEXT 64K
  ENCRYPTION USING "AES256".
  DEFAULT STORAGE (ENCRYPT);
  
  Step 4 - assign the user to the encrypted storage space;
  -----------------------------------------------------
  ALTER USER scott QUOTA UNLIMITED ON encrypted_ts;
  
  
  Step 5 - check space storage, encrypted or not.
  ------------------------------------------------
  SELECT nom_tablespace, encrypted from dba_tablespaces;
  
  Step 6 - Test of encryption.
  -------------------------
  CONN scott/tiger
  
  CREATE TABLE ets_test (id NUMBER (10), data TABLESPACE VARCHAR2 (50)) encrypted_ts;
  
  CREATE INDEX ets_test_idx ON ets_test encrypted_ts (data) TABLESPACE;
  
  INSERT INTO ets_test (id, data) VALUES (1, "it is a secret!) 1') ;
  
  COMMIT;
  
  _ Now I am interrogating the table it gave the following error
  
  C:\Documents and Settings\suresh gelda > sys/xxxx sqlplus as sysdba;
  
  SQL * more: version 11.1.0.6.0 - Production the sea may 4 08:41:39 2011
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > select * from scott.ets_test;
  Select * from scott.ets_test
  *
  ERROR on line 1:
  ORA-28374: typed master key could not be found in the portfolio
  
  
  SQL > ALTER SYSTEM SET PORTFOLIO OPEN IDENTIFIED BY "abcd1234";
  ALTER SYSTEM SET PORTFOLIO OPEN IDENTIFIED BY "abcd1234".
  *
  ERROR on line 1:
  ORA-28354: already open wallet
  
  SQL > conn scott/tiger
  Connected.
  SQL > select * from ets_test;
  Select * from ets_test
  *
  ERROR on line 1:
  ORA-28374: typed master key could not be found in the portfolio
  
  SQL >
  
  Best regards
  SG

  When you start Oracle Wallet Manager (OMG), could you please confirm if the automatic connection option is checked or not?

  Thank you
  Hussein

• Not able to view the identity of the user in SPR

  Hello
  I use obiee11.1.1.6.6 in GNU / linux. When I creat user in the console after I can "' t able to see this user in my RPD (online mode).
  
  Could you please help me I need to set the logging level to each user and how to see these using RDP.
  
  Note: after migration in prod dev, I've removed all users offline then moved RPD server. After connecting the RPD in online mode. I can learn Wharton are available in myreal user. (B ' cos I can't able to connect all Analytics users, after refered some forums, then I deleted all RPD users).
  
  Thank you
  Gram

  Check this box
  http://prasadmadhasi.com/2011/12/01/unable-to-view-log-file-in-OBIEE-11-1-1-5-0/

• Not able to view the photos with on opening the files

  cant c photos w / opening files

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  The body of the message, please state your question.

  I guess you are saying that you can not see the photos?

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• not able to view the report header on each page of the rtf report

  Hi all

  I used <? Start: body? > and <? : slim body? > in rtf to repeat the value of the region as a header on each page. The region is displayed when there is a change in the region, it does not display on each page in the pdf output. Any suggestion. I can send the rtf

  Sushil

  If you want to repeat the value of the region on each page, you must make sure that the region field is placed above the tag. In addition, you must use @section for the code group. I responded to your email as well. Take a look at the model that I sent to see if the output is acceptable.

  Thank you

  Bipuser

• not able to view the image in the column of table advace

  Hi all
  I try to display the deleteicon_enabled image in the column of table in advance. I created an item of type link under a column of table in advance. And I created another element of type under the link image. And gave values of property element in the image as follows:
  
  Image URI:D:/Oracle/OAF_JDev/jdevhome/jdev/myhtml/OA_MEDIA/deleteicon_enabled.gif.
  
  In the output I does not display the image.
  
  Am I missing something?
  
  Thank you
  Sunny

  You can try affecting just "deleteicon_enabled.gif" compared to the entire URI of the Image path?

  Kind regards
  LC

• Not able to view the tables.

  Hi all
  
  I've created a few tables with a user id in oracle and I give all subsidies on this table to another user id
  
  GRANT ALTER, DELETE, INSERT, SELECT, UPDATE, WHEN UPDATING OF COMMIT, QUERY REWRITE, DEBUG, FLASHBACK ON THE TABLE ANOTHER_USER;
  
  When I login into oracle with a different user name, I am able to do all the operations on the table, but I don't see the table in the list of the table which shows the connection. I also see that when I ask my user_tables table, this table is empty.
  
  Is there a way I can make it visible to the user of another.
  
  Thank you
  Lee

  You should be able to see your table under the node of other users, or by using the new schema browser feature if you use SQL Developer 3.0

• not able to view the report in PDF format from the worksapce

  Hi all
  
  I want to see my reports in PDF format. So, that from the workspace
  I opened my report and chose run as a PDF, but I can not
  see it in PDF format. It shows me page cannot be displayed.
  Can someone tell me how to see the reports in PDF format?
  
  
  Thank you

  Hello

  I take that you have installed is:

  -Adobe Acrobat Distiller Server 8.0 or 6.0
  -GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6

  On the server and the Adobe acrobat reader on the client.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• not able to write the data through data acquisition

  Hello

  In fact, I need to send a code word (text file) from the program matlab through my data acquisition (OR-USB-6215). my program (transmitter.vi [case structure: page2]) attached below has a problem to do the task. whenever I run the program it gives me an error like

  Error-200479 occurred at DAQmx start Task.vi:2

  Possible reasons:

  Measurements: Specified Operation cannot be performed during execution of the task.

  Task name: _unnamedTask<84>

  At the moment I don't see output in my oscilloscope. But, if I highlight my performance I observe my samples on the oscilloscope with the following error message

  200288 error has occurred in the DAQmx write (analog 1-d 1Chan NSamp DBL) .vi:3
  Possible reasons:

  Measurements: Attempted to write a sample beyond the final sample generated. The build is stopped, so the sample specified by the combination of the position and the offset is never available.

  Hi Raja,

  What I did is I moved the 'write DAQmx' outside the while loop. That made the VI in this case is read the file and passing it to a table, and then this table is formatted a waveform to be written to the data acquisition device.

  With respect to the way in which the data is read, I don't change anything, it was based on your original code. A good way to know if you write the correct data is to check the chart view in VI.

  So the question is, is the graphic display showing the good waveform?

  Best regards

  Faris