Not available with the .tif file layers

Similar Questions

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• D7360 automatic duplex printing is not available with the latest driver

  D7360 automatic duplex printing is not available with the latest driver

  Hello ephsh,

  Welcome to the HP Forums.

  I see that you have a question to try to make some duplexing.

  So I can better help you, please answer with the operating system that you are running:
  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  I will attach a document that addresses an double-sided printing Option is not available even if an Automatic Two-Sided (duplexer) printing accessory is installed.

  Please do not hesitate to write me again at your convenience.

  See you soon,.

• Last update of features not available with the old site file

  Downloaded the latest update with the functions of breakpoint, but when I open an older file, the MUSE desktop looks and works like the old application to MUSE.   But with the same MUSE when I start a new site, all the features are there.  I also noticed that when I went to download most old site after doing some updates in the last MUSE updated app, it worked as a newer site would be using the new features.  In other words, I don't see or have the scroll bar to the right or the other options available for an older site, but if you create a new site.

  Y at - it a fix for this please?

  -RS

  Looked again, his point of view Page called and he helped.  Thank you!

  -RS

• Indexing Service Windows RT does not in with the added files.

  I have the Asus Vivo tab RT and I put all my libraries to save to the default SD card by creating a virtual hard disk on the SD card and have a special mount the reader at the start of the system.  I added this virtual hard disk for the indexing service to ensure that it gets indexed but when I add / deletes files of the libraries, they display not upward unless I rebuild the index later.  I have Windows 8 running on a desktop computer and these libraries are pointed on an external hard drive and it maintains almost instantly.  I tried to let the Tablet sit overnight after the addition of some files to see if it never catches up, but so far without success.  Is it the way it is supposed to work or is at - it something wrong with the indexing service?  Or is it because I'm using a VHD?  I can live with that for the moment, but if all goes well, there's a way to fix this or it is corrected by a software update in the future.

  You can try using a junction point instead of a montage of virtual hard disk.  I can't say this will absolutely work, but it's worth a try.

  This tutorial is off this topic, but it explains how a junction point:

  http://Skeene.NET/tech/sync-unmoveable-folders-to-SkyDrive/

• MSDASQL does not work with the TNSNAMES file. ORA (SERVER = SHARED)

  Hello

  I use XE 11g on Windows 7 platform.  I also have Microsoft Office 2013.

  I have a macro in Excel that is running on a regular basis to load a small amount of data in Oracle tables.  It has worked well for years.

  Recently, another reason, I had to update the TNSNAMES file. ORA on the client and the server.  I had to change the (SERVER = DEDICATED) affecting (SERVER = SHARED).

  As I made this change, the macro no longer works.  If I change the TNSNAMES file. ORA back to DEDICATED on the client, all is well again, but my other new features fail.

  I get the following Microsoft VBA error when I open the client connection:

  [Oracle] [ODBC] [Ora] ORA-12520: TNS Listener could not find a Manager is available for the requested server type.

  I write the issue here since the TNSNAMES file. ORA definition seems to be the critical difference.

  Thanks for looking at this.

  Phil

  Hi Jari,

  Thanks for having me on the right track.  I solved it in other words.  I added a new section (XE_MSOFFICE) for the TNSNAMES file. ORA file on my client.  I then used the Microsoft ODBC Data Source Administrator tool on the USER DSN tab, I've reconfigured the TNS Service for XE_MSOFFICE name field.  I tested all functions and all work perfectly now.

  XE =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = server_address)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = SHARED)

  (SERVICE_NAME = XE)

  )

  )

  XE_MSOFFICE =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = server_address)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = XE)

  )

  )

  EXTPROC_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))

  )

  (CONNECT_DATA =

  (SID = PLSExtProc)

  (PRESENTATION = RO)

  )

  )

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

• Suspension does not work with the exFAT file system

  I'm under Windows 7 Enterprise 64 and WMware Workstation 7.1.2 build 301548 on a host of 4 GB RAM machine.

  I created a virtual computer running Windows XP Professional SP3 with a virtual disk of 60 GB preallocated and cut into pieces of 2GB. RAM for this virtual machine is 2304 MB.

  All this virtual machine files are stored in a partition exFAT about 84 GB leaving 24 GB free.

  Everything works very well and fine, but I can't suspend the VM. When I try to do, I get the following error message:

  Cannot open the file 'C:\ProgramData\VMware\dndlogs\dndlog.conf': the system cannot find the specified file.

  Failed to save the State of the virtual machine. The State of this virtual machine may be registered only on a file system that supports more than 2,383 GB files.

  The underlying file system only supports files up to 2 GB.

  Do not suspend the VM.

  As exFAT supports files of size up to 16 exabytes (8 billion more than 2 GB!), for me this error sounds like VMware Workstation does not support exFAT partitions.

  In any case you know any workaround solution to suspend my virtual machine? Is really not exFAT support?

  Any help really appreciated!

  Kind regards.

  the dndlog.conf message is annoying but completely harmless.

  exFat is not completely compatible - you must disable overzealous checking file system with the line that Woody already mentioned.

  That usually works.

  If it is necessary, you can also set the directory - suspended like this

  suspend. Directory = "h:\suspend".

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Microsoft Publisher 2010 PDFMaker add-in not available with the installation of Acrobat Pro XI

  I have Microsoft Office 2010.  I installed Acrobat Pro XI against the clouds of Adobe.  The PDFMaker Add-in works fine for Microsoft Word, Excel, and PowerPoint.  However, the PDFMaker Add-in does not work for the Publisher. He is absent.  Why?

  Note: The installation of Acrobat Pro XI deleted my install Acrobat X Pro.  Were complements of PDFMaker works fine with X.  Due the fact that X has been removed, I have no fallback option.

  Is it possible that I'm missing a file?

  Location of the folder: C:/Program Files(x86)/Adobe/Acrobat 11.0/PDFMaker/Office

  File display: PDFMOfficeAddin.dll, PDFMWord.dll, PDFMExcel.dll PDFMPowerPoint.dll

  The files is displayed: PDFMPublisher.dll

  No, MS Publisher is no longer supported from the KB document listed below:

  http://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

• Audio is not importing with the video file to the script?

  Hi, Im and more recent Premiere Pro Windows 10.

  When I pull a mp4 or mts file regardless, only the video it shows.

  Audio is not brought.

  Who is wrong?

  See attachment.

  

  [moved to the forum for the creation of mod]

  You forgot to patch source audio track;

  

• lifeveiw 32-bit video fly application driver is not compatible with xp 64 bit and driver update is not available with the manufacturer

  tell me how to change the compatible driver in my bit of xp professional 64 window.

  Hello

  Device drivers designed for the 64 bit version of Windows do not work on computers running a 32-bit version of Windows.

  You must contact the manufacturer to improve the assistance on the issue. Link: http://www.lifeview.com.tw/html/contact_us/contact_us.htm

• DNG file not workung with the NEF files

  Cannot detect. My Nikon D800 E NEF files

  you need to camera raw 7.1 or higher.

  update your program, http://www.adobe.com/downloads/updates/ or click Help > updates.

  If you have a problem, what program (name and version) you are trying to update?

• Down upwards arrow keys do not work with the curves?

  I have the latest version of Lightroom. 3.4.1 I wish I could adjusted curves using my up and arrow keys rather than manually with the mouse.

  I tried everything nothing helped. I can't point the curve move my arrows. The arrow keys work with other aspects of Lightroom this as if I hover over vibrance and use the arrow keys to make adjustments, they work perfectly.

  I do something wrong here.

  Can someone help me please?

  I'm on Windows 7 Pro.

  Thank you.

  This feature is not available with the curves that, like you, I'd love the ability. FYI, you can refine the points with the mouse by holding down the option/ALT key.

• iCloud backup after iOS 10 - some files were not available during the last backup

  HI - we are a company with about 350 users of iPhone and iPad.  I put this in the iCloud in the community section, but I've seen other users have the same problem in this section, so I thought I would add here.

  In order to stop users add their own e-mail accounts on the iPhone that lock us the device through restrictions - deactivation of the accounts section.  It stops and then access the iTunes settings.  In the test of iOS 10.0.1, we have one of the devices (a 16 GB 5 s, who had been a backup at 7:20 that morning), improved 9.3.2 that went well with no obvious problems, then, after a few days to leave the handset to the function, we have lifted the restriction and the backup on iCloud to find any backup not occurred since the upgrade and a message 'some files were not available during the last. backup"in its place.

  If all our staff upgrade their phones (we gave says not yet) then the backups look like they stop.  It is easy to fix, as a manual backup, will complete the process, but you have to remove the restriction to do this.

  We tested on iPhone 5, 5 s, air iPad iOS 8 to 9.3.5 and all have this problem.

  I have exactly the same problem, 16 GB iPhone 5s as well. I plan on raising at my Genius Bar appointment today.

• I tried to backup my iPhone several times. I get a message indicating that some files were not available at the time of the backup. How can I solve this problem?

  I attempt to backup my iPhone several times and it does not backup. I received a message stating "several files were not available at the time of the backup. How can I solve this problem?

  Hello Lope8725,

  Looks like you are trying to backup either iCloud or iTunes, but you have found an error on files being unavailable. Can reply you with the exact wording or a screenshot of the message you are getting?

  In the meantime, you can solve the problem with either of those two sections depending on whether or not it's iTunes or iCloud:

  If iCloud backup could not be completed or if you can not restore

  or

  If your iTunes backup could not be completed or you cannot restore from a backup

  See you soon!

• I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer.

  Original title: scams?

  I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?

  Continue to put the phone down. They are all crooks.

  They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.