Not be able to restrict the user Bind DN using OUD11g Proxy

Similar Questions

• I get a message when you move a file of LR6 to Photoshop. It says I need to update Camera Raw to make it work properly in Photoshop. So far I have not been able to find the update and could use some help.

  Hello

  I work between LR6 and Photoshop CS6. I now get a message that I need to update Camera Raw in LR6, when I send a photo to CS6 for further editing, but when I look at the updates I'm not finding this one, nor any other updates are needed for my software. I'd appreciate feedback I can get on this subject. Thank you. Gary

  The latest version of Camera Raw compatible with Photoshop CS6 is Camera Raw 9.1.1. There will be no updates available for Photoshop CS6. This message tells you that Lightroom has additional changes that your version of Camera Raw is perhaps not able to interpret when you send an image from Lightroom to Photoshop. You are given the choice. You can open the image in any case, or you can let Lightroom create a copy that includes all adjustments of Lightroom and send this copy to Photoshop. In most cases, you want to make the second choice. When this warning message is displayed, I think that there is a checkbox to indicate not not to show it again. The only way that you can solve the problem would be to upgrade to Photoshop CC 2015. If not, simply select the option to edit a copy with Lightroom adjustments.

• How to restrict the user to enter not same value in a table

  Greetings!
  
  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.
  
  It was: I have created a table, as shown in the example.
  
  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.
  
  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...
  
  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:
  
  It's all done on typing submit prior to registration.
  
  Please drivers

  Hello

  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.

  It was: I have created a table, as shown in the example.

  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.

  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...

  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:

  It's all done on typing submit prior to registration. >

  Stick the code below into the Page header > Javascript > run when loading the Page field.

  $('[input[name="f03"]').blur(function(){
    if ($('input[name="f03"][id!="'+$(this).attr('id')+'"]').val() == $(this).val()) {
       alert('Duplicate Entry.');
       var x = $(this).attr('id');
       setTimeout("(function(p){$('#'+p).focus();})('"+x+"')",100);
    }
  })
  

  Note:
  a.F03 is the 'name' of your column of username in the form of tables.
  b. This only valid values. If your tabular presentation has multiple pages then all of the rows are not currently displayed will be ignored.

  See you soon,.

• I want to restrict the user manual release of the HOLD in the sales order

  Hello

  I want to restrict the user manual release of the HOLD in the sales order

  Hello

  Please use below the installation program

  1. go in responsibility: responsibility of the order management Super user.

  2. go to the Set up > order > holds > define.

  3 ask the wedge which has already been set.

  Assign at least a responsibility to a particular action as shims to apply or release, and then only hold permissions will take into account.

  4. after installation above this shim is not in the LOV when connecting other

  responsibility

  Thank you

• Used the ADF security, has been able to authenticate the user. problem when disconnecting

  Hello
  
  I implement security ADF, was able to authenticate the user. In my home page, I have a link to log out.
  If clicked it the follwing method is executed
  
  ExternalContext ectx =
  FacesContext.getCurrentInstance () .getExternalContext ();
  HttpServletRequest request = (HttpServletRequest) ectx.getRequest ();
  HttpServletResponse response = (HttpServletResponse) ectx.getResponse ();
  HttpSession session = (HttpSession) ectx.getSession (false);
  session. Invalidate();
  String temp =
  request.getContextPath () + ' / adfAuthentication? Logout = true & end_url=/faces/logout.jsp ";
  
  try {}
  response.sendRedirect (temp);
  FacesContext.getCurrentInstance () .responseComplete ();
  } catch (Exception ex) {}
  System.out.println ("Exception in logout())");
  
  }
  
  but the problem is it of not accessing the page to disconnect its redirected to the login page.
  logout page is public page, still transmitted sound to the login page.
  
  any help would be appreciated

  Hello

  Hey this is not possible it is cause to happen when you invalidate the session, you have configured in the Web.XML when the session is not committed go you to the login page if you want it redirect to the mention of logout page this page as error page when you set up the configuration of the connection in the web.xml file

  Concerning
  Rohit

• Just recently I have not been able to move the folder on my desktop. I have to copy and paste it into a new folder, and then delete the old on.

  Just recently I have not been able to move the folder on my desktop. I save videos to my office then then move in different folders, but now need to copy and paste, then remove the video from office.  Around the same time, when I try to use help I have Windows Help cannot start.  So please HELP.  Using Win7.

  Hello

  1. Did you of recent changes made to your computer that caused the problem?
  2. It happens that the Office? Have you tried with Documents and other readers?

  Step 1: File system [SFC] Checker

  Try to run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run a virus scan to check if there are infections on the computer:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Step 3: Follow the instructions in the article to fix the problem of files and folders in Windows:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  For more information, follow the instructions in the article to improve the performance of Windows 7:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  It will be useful.

• Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  In my project, I have disabled the Quiz results slide and manually set the actions of success/failure to "go to" a customized results slide:

  

  On results carts custom pass/fail (as well as all the slides that follow), I need to disable the playback bar so that the user cannot use the navigation controls. I have created a tip action to disable the playback bar and set it on every slide that follows the Quiz:

  

  The tip action fails to disable the playback on my personal results slides bar; but I know that the action does not work correctly because it works on all the slides that follow my personal results slides. This leads me to believe that there is something about the function "go to" success/failure that is causing my Advanced action not to function. Is there a work around for this?

  Just checked out, and it works for me. I combined the jump and turn off the bar reading a success and failure action:

  SuccessAction

  • Jump to drag the success
  • Assign the cpCmndShowPlaybar with 0

  FailureAction

  • Jump to slide fail
  • Assign the cpCmndShowPlaybar with 0

  Why you split? He was not even the need to create an advanced action.

• How to restrict the user to enter data into the PLUGS DO

  Hello
  
  I textinput in my page, I have to restrict the user to enter the data covers only.
  
  can someone help me on this.
  
  Knockaert

  Please go through this site.

  http://oracleanil.blogspot.com/2010/10/restrict-user-to-enter-data-in-caps.html

  Concerning
  Meher Irk

• Add the user to the users group in the Users.ini file using c#

  Hello

  Using a c# application, we strive to add/remove a user from the TestStand Users.ini file.

  The CreateDeleteUsers.seq file in the samples of TestStand is used as a reference.

  We have seen that we are able to add the user to the list of user help file

  engine. UsersFile.UserList.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  However, when we try to add the user to the user group, the sample file CreateDeleteUsers.seq said

  RunState.Engine.GetUserGroup (Locals.GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, Locals.User.AsUser.LoginName)

  If we try to replicate this in c#, the API seeks the last parameter (which is LoginName in the CreateDeleteUsers.seq file) as an object of property

  engine. GetUserGroup (this.) GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  This causes an exception of object reference when we run the application.

  Please advise on how to proceed.

  Thank you

  Arun-

  The members property is an array of string, so the 3rd parameter to SetPropertyObjectByOffset requires a string property object, IE. the user name and not of the user object. From the will of the user object error with '-17308; Specified value is not the expected type. ». The example should really be using SetValStringByOffset to be clearer so that you only specify the user name of the actual string.

• I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

  I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

  I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

  Home Group is Windows 7.

  Here is the Vista Forums.

  What operating system do you use?

  Vista info below:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Vault to Oracle set up rules to restrict the user and the type of application that can connect

  Oracle 11 g 2 (11.2.0.4.3)

  RHEL 6

  Hi all

  We are experiencing a few problems to configure the following condition:

  Users A, B, and C will not be able to connect via SQLPLUS.

  So I took note of the political examples on how to Set Up database Vault (Doc ID 972477.1() -section restrict access to the database (sqlplus) unwanted tools:

  However, it doesn't evaluate the rule in the rule set correctly. The rule set is as follows:

  DVF. F$ MODULE! = ' SQL * MORE AND DVF. F$ SESSION_USER NOT IN ("USERA", "USERB", "USERC")

  This rule allows all users to connect except those defined in the rule. And it applies also to the developer SQL (and all other connections). If I change to be 'IN' he also allows users in the list, but no one else. In addition, somewhere I think it evaluates it as "OR" rather than "AND". What I want to do is:

  IF user IN ("USERA", "USERB", "USERC") AND SYS_CONTEXT ('USERENV', 'MODULE') = ' SQL * MORE

  SO, do not allow the user to connect.

  Note: The factor (MODULE) has been created by me and her expression is SYS_CONTEXT('USERENV','MODULE')

  Any help on this would be greatly appreciated.

  I tested these rules and they work:

  (1) ((upper (sys_context ('userenv', 'module')) like '%%') and (not in sys_context ('userenv', 'session_user') ('A', 'B'))) or ((upper (sys_context ('userenv', 'module')) like ' % %') and DEVELOPER (not in sys_context ('userenv', 'session_user') ('A', 'B'))))

  (2) ((upper (sys_context ('userenv', 'module')) not like ' %PLUS%')) or ((upper (sys_context ('userenv', 'module')) not like ' % DEVELOPER %'))))))

  I'm blocking users A and B to connect from SQL * more and SQL Developer

  -set the rule defined for all THE TRUE evaluation

• Restrict the user to associate a specific type + definition assets

  Hello

  Is there a way to restrict user access to associate only active special definition for a type of asset to FatWire 7.6.2

  For example: If there are 2 definitions for a type of asset (flex), while creating the attribute type-active, I am able to select the type of assets but no particular definition.

  Any suggestions or ideas.

  Kind regards

  Guddu

  Unfortunately, out of the box this feature is not available in version 7.6.2 FatWire (available in 11 g).

  You must create a custom attribute Editor by extending the PickAsset attribute Editor to achieve this.

  Kind regards

  Ravi Guntuku

• Possible way is to restrict the user to the planning an application

  Hello Experts,

  I have a requirement as I want to restrict bit user related to the demand for labour in the planning depends on business unit and product.

  that is... The test user could not access of the user to the company as an employee depends on some operational units and related products. So is it possible to do outside the [Chronicle] manual process.

  Thanks in advance...

  Are you just wanting to restrict access to specific members to enter data to or it also includes being able to 'see' only the data based on some examples.  For example, in the type of financing plan, I have write access to the Dept 123 for all accounts of actual Net profit, I want they have read access to this Department?  In this case, I would make sure that specific effective accounts, that I make sure that the user/group has only read access.

  Thank you

  Mark