Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

Similar Questions

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I have Firefox 5 and Reminderfox. But Reminderfox does not appear. What is the problem?

  I have Firefox 5 and Reminderfox. But Reminderfox does not appear. What is the problem?

  You probably Fox reminder set to display in your status bar which is no more. RF options have lots of display options, or you can restore your status by an extension bar-

  https://addons.Mozilla.org/en-us/Firefox/addon/status-4-EVAR/?src=API

• My "and"do not appear until I hit the space bar?

  Hello

  As written in the subject, my Yoga, "" do not appear until I hit the space bar.

  A as the default? or there is a way to change this?

  Thank you.

  Hi khorkhorjin,

  Thanks for posting in the community of Lenovo,

  Could you please check the wording of the key of the Control Panel then language and region and after this language

  Press keyboard and languages and check the keyboard input language and ensure that its language: English United States,.

  Hope the helps of information. Let us know.

  Concerning

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• Data warehouses do not appear on all of the hosts even though storage devices appear on all hosts

  I have a frustrating problem that I can't solve, my data stores do not appear on all of the hosts even though storage devices appear on all hosts.  Tips on troubleshooting this would be greatly appreciated, it is connected to a Synology NAS iSCSI environment and I use it for my VCAP studies right now, or was

  Tried a lot of things so far...

  -Recreate the target and starting from scratch

  -recreate the cluster from scratch

  -Restart the storage

  -Restart the hosts (I think that I did in all cases)

  
  

  And probably a few other things, would appreciate any other advice/lessons

  Post edited by: a.p. - title shortened to allow for answers

  Please take a look at KB VMware: vSphere management LUNS identified as LUN snapshot to see if that helps.

  André

• How to freeze the layers and block them so that they do not appear when you open the file?

  How to freeze the layers and block them so that they do not appear when you open the file?

  You can set the Initial State of the layers as hidden.

  The game, 18:09, kathya97643775, [email protected], 8 October 2015 >

• Why is it not possible to do once the purchase of photoshop?

  Why is it not possible to do once the purchase of photoshop? I'm not interested in any new updates or features, all I want is to be able to use it occasionally. I use it still every month and having to pay a minimum of $9.99 per month is a waste of my money...

  Try this to get photoshop CS6

  Adobe - Adobe Photoshop CS6 shop

  Change the prior of the country store to make a purchase.

  Concerning

  Stéphane

• In transfer of file FTP to a third host, I get an error [folder does not appear to point to the site]

  Why this error is launched: "the file does not appear to point to the site.

  Hello

  This error comes usually when you publish your site not in the appropriate folder.

  Can you republish your site to "public_html" folder since it is generally the case that most accommodation use of service to websites default host providers.

  Hope this helps

  Kind regards

  Rohit Nair

• Slide auto is using of multiple text entry boxes once the user enters two of the six answers

  I have several areas set up on a slide text entry.  The user must enter the answer in each text box.  And even though I have properties of all TEB "break from legends of success or failure", auto slide advance once the user enters only two of the six responses.  I thought that perhaps insert a click box and setting ' to pause until the user clicks on "would resolve the issue... but it is not.  Here's a screenshot of what my slide looks like and a screenshot of the properties that I set myself for each TEB.  Can someone help me please?  I need all six TEB to complete before moving to the next slide.

  

  

  

  The most important screenshot is missing: chronology. Where are the pausings for the TEB?

  You can start by changing the Actions on the success and the last attempt: they are both set to Continue, which means the playhead will be published immediately after a good response and after exhausting attempts in case of wrong answers. Set them to any Action.

  No Submit button? Only shortcut key entry for each TEB?

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• Not able to see anything the user

  Hello
  An of my user is logged in presentation for the first time Services and she sees nothing, I can it it when I connect to by Admin, I even added areas, but she is still not able to see anything, what could be the problem. She has disconnected and connected again couldn't see we need to do anything once the user connects for the first time.
  
  Quick help is necessary.
  
  Thank you
  Amit

  Hi Amit,

  What are exactly did you see? When you connect to do you get the below message?

  ! http://i45.Tinypic.com/30ximab.PNG!

  Or do you simply not dashboard/reports shared dashboards?

  If you get the above screen message, then you must:
  1) go to settings-> Administration-> Manage privileges.
  (2) under 'Access' make sure that 'Everyone' has access to dashboards and answers or specific users can access.

  If you do not receive the message above, but only can not see any shared reports try the following
  1) go to settings-> Administration-> manage presentation catalog
  (2) where it is said: ' catalog root: shared "click on catalog root
  3) click on the Permission (Lock) icon next to the shared folder
  (4) make sure that everyone has "read" permission
  (5) make sure that the two boxes (apply permissions to subfolders) and apply to the items in the folder are checked
  (6) give of course is not contradictory permissions (as everyone has read but specific is denied read).
  7) click done and accept the updates warn that it gives you.

  One of those who should fix this for you.

  -Joe

• Shoot username in the Apex form text field once the user is connected.

  Is it possible for a username to autopopulate a text field in a form once the user is logged?
  
  Example:
  
  John Doe connects as jdoe. Once authenticated, he is taken to a form where a field has already slapped in user name.
  
  Is this possible? If so, examples?
  
  Thanks for any help,
  
  Joseph

  The field must have already affected with v ('APP_USER') or: APP_USER. Check the default value of the field

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog