Not be able to start 18 Wheels of Steel Haulin

engine prism3d.exe error

I have a game called '18 Wheels of Steel Haulin'. But I get an error when I try to load the game (engine prism3d.exe error)

Hello

· You receive an error with the error code?

· Have you been able to play the game before?

· What is the number and the model of the computer?

I suggest you to check if the configuration of the system corresponds to the system requirements for the game.

Also check if there are recent updates or patches to display map published on the site of computer manufacturer.

Tags: Windows

Similar Questions

  • FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

    My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

    Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

    The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

  • Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

    Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

    A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

    RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

    RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

    In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

  • I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

    I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

    1) update your nVidia/software drivers to the latest version for your model video card + operating system.

    (2) check that the equipment is not defective.

    This is not a Microsoft / number of the operating system.  For additional troubleshooting - contact the manufacturer (nVidia).

  • Not be able to start DW CS4 after upgrade to the final version of Windows 10

    Dear Sirs.

    I installed DW CS4 on Windows 10 Preview Edition and it worked fine. After the upgrade to the final version of Windows 10 I'm no more able to start DW. I guess it's a problem with licensing. I just tried uninstalling and reinstalling, but is not changes anything.

    Thank you for your help... Michael

    There are some ongoing discussions about this, one of them in W10 is...

    Do a search for CMD

    The icon right-click command prompt and choose Run as administrator

    In prompt, type (make sure that space is there between sfc and /)

    sfc/scannow

    Press enter

    When finished, restart the computer and try again to DW.

  • Not be able to start admin server after upgrading to 9.2 9.2 MP1 MP3

    Hello

    We are not able to start the administration server after upgrade of MP1 9.2 9.2 MP3.

    We can see error below:

    in Admin Server Log:

    # < Sep 28, 2009 16:20:58 SGT > < opinion > < security > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126058891 > < BEA-090082 > < security initialization using security realm myrealm. >
    # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060451 > < 000000 > < ManageableCitiLoginModuleImpl.initialize >
    # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060451 > < 000000 > < ManageableCitiLoginModuleImpl.login >
    # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060453 > < 000000 > < userName = xxxxxx >
    # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060457 > < 000000 > < ManageableCitiLoginModule.commit >
    # < Sep 28, 2009 16:21 SGT > < critical > < security > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060671 > < BEA-090404 > < xxxxxx to the user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of policy server. >
    # < Sep 28, 2009 16:21 SGT > < critical > < WebLogicServer > < ssunu17 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1254126060674 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: xxxxxxx for the user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.
    weblogic.security.SecurityInitializationException: user xxxxx is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:991)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    >
    # < Sep 28, 2009 16:21 SGT > < opinion > < WebLogicServer > < ssunu17 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1254126060727 > < BEA-000365 > < changed failed State Server >



    any idea?

    The username admin and the password is encrypted based on the version of domain, domain name and so on.

    To get your new server admin area so that it starts normally I would say that you rename the folder ldap under server admin domain folder.

    user_projects\domains\base_domain\servers\AdminServer\data\ldap

    From the administration server after it would create a new folder with all necessary files ldap, and you should be able to start your management server.

    Try to start the servers managed after that and if she does not follow the steps above for the managed server as ldap folder.

    Thank you
    Sadaka

  • Not be able to start DB after the addition of node

    Hi all

    I added node RAC3 successfully in 11 GR Platfiorm RHEL5 2 RAC

    When starting DB, I get the below error
    [root@rac1 bin]# ./srvctl status database -d dev
Instance dev1 is not running on node rac1
Instance dev2 is not running on node rac2
Instance dev3 is not running on node rac3
[root@rac1 bin]# ./srvctl start database -d dev
PRCR-1079 : Failed to start resource ora.dev.db
ORA-29760: instance_number parameter not specified
CRS-2674: Start of 'ora.dev.db' on 'rac3' failed
CRS-2632: There are no more servers to try to place resource 'ora.dev.db' on that would satisfy its placement policy
[root@rac1 bin]# ./srvctl status database -d dev
Instance dev1 is running on node rac1
Instance dev2 is running on node rac2
Instance dev3 is not running on node rac3
[root@rac1 bin]# 
    [root@rac1 bin]# ./srvctl start database -d dev
PRCR-1079 : Failed to start resource ora.dev.db
ORA-29760: instance_number parameter not specified
CRS-2674: Start of 'ora.dev.db' on 'rac3' failed
CRS-2632: There are no more servers to try to place resource 'ora.dev.db' on that would satisfy its placement policy
    Please suggest me...

    Hello

    Dev3.thread = 3

    dev1.thread = 1
    DEV2.thread = 1 >

    Change the dev2.thread = 2 and check

  • not be able to start in safe mode

    I found a Trojan horse that is attached to skype.exe.

    I tried to start in safe mode by pressing F8 at startup upward, but I'm not able to access safe mode start upward.

    Any thoughts?

    Thank you

    It worked - thank you.

  • has not been able to start opmnctl after upgrade

    Dear Experts,


    I'm done to upgrade the R12.1.1 DB 11.1.0.7 to 11.2.0.4 ebs.


    I started database and listener, but when you try to start the service application I got the following error in adopmnctl.txt.



    LPX-00202: couldn't open "/ u01/applr12/inst/apps/VIS_ebsvm/ora/10.1.2/opmn/conf/opmn.xml" (error 200)

    XML parsing failed: error 202.

    opmnctl: opmn.xml validation failed.

    any help,

    Kind regards

    Ahmad,

    solution found in this article

    Opmnctl command fails with the error "a file or a directory in the path name is not." or "LPX-00202:" (Doc ID 756573.1)

    Thanks for all of the Oracle community special sanae & Hussein.

  • Not be able to start weblogic server

    Hello

    I'm new to OBIEE. We tried for the first time after installation, stop and start the server in OBIEE. But when starting, it gives this

    {code}

    Java security policy OPSS-provider loading failed due to the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: oracle.security.jps.JpsException: oracle.security.jps.service.idstore.IdentityStoreException: oracle.security.jps.service.igf.IGFException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: oracle.security.jps.service.igf.IGFException: JPS-02597: you have configured a custom or generic authentication provider LDAPAuthenticator WLS, which the libOvd cannot recognize. Provide the idstore.type property in the config.xml file - jps, or use a specific WLS LDAP authentication provider that corresponds to your LDAP server instead of a generic.

    {code}

    I looked at the JPS-02597 error and it says to

    {code}

    The 'idstore.type' property must be specified in the file config.xml - jps as specific type as OID, etc. OVD. You can also select a specific LDAP WLS authentication provider that corresponds to your LDAP server.


    {code}


    In $FMW_HOME/user_projects/domains/my_domain/config/fmwconfig/jps-config.xml, I don't see any property as idstore.type.  We add this? or if not where can I find the jps-config. XML


    I am brand new to OBIEE and WLS. So please guide me.


    Thank you


    I had to update the GUID and everything was fine. Thank you

  • has not been able to start installing oracle

    I am using a computer hp laptop with Vista Home Basic preinstalled. I had it demoted xp - pro and tried to install oracle10g and oracle 8, but none of them succeeded. When I click on the file setup.exe, the process does not start. in fact, I have observed in the Manager tasks that the setup.exe file is included once I start the installation, but within one or two seconds, the process ends automatically. I couldn't guess where is the problem. Please help me to install oracle. Thank you.

    Published by: user10731891 on December 21, 2008 06:24

    No, don't remove anything yet :). You can change your tnsnames.ora entry and change the port to 1521 by 1522 and give it a try.

    Also how many times you have oracle database?

    You can go to the control panel-->---> services--> and loook for the administration tools (for example the oracleServiceORCL and the like if everything) and for the listener something like this OracleOraDb10g_home1TNSListener. You can always delete old listner using netcca. You can see under (for example C:\Oracle\product\10.2.0\admin\orcl\bdump\alert... Log in to the file of the error messages or post here the last 20 lines of alert.log.

    concerning

    Published by: OrionNet on December 22, 2008 14:41

  • Cannot start Firefox, crash even in Crash Reporter. Not be able to start in safe mode either.

    Cannot start Firefox. He goes to Mozilla Crash Reporter every time. I can't even start it Safe Mode.
    I tried to uninstall and delete all the files related to Mozilla Firefox in & AppData & and each base registry with RegEdit.

    I have run, or at least try, on a system with Windows 7 64 bit, 8 GB RAM, 314.22 driver for Nvidia GeForce GPU and a CPU Intel Core i5 2500 k CPU.

    Little help would be nice.

    Hi deliubogdan

    Try to remove the extension DataMngr (Datamngr.dll)

    Do a check with some malware malware, analysis of programs on the Windows computer.

    Please scan with all programs, because each program detects a different malicious program.

    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • has not been able to start netproj.exe

    I have windows 8 pro 32-bit wmc, and when I get netproj and start it, nothing happends. I tried to start as administrator but nothing happends don't too. problems with compatibility solves nothing. Hat so I need to do?

    I got the answer in another forum: go to settings, then search for the functions of the windows system (or how is in English, here you can activate the functions we or off) and alowe here this function

  • By mistake I have disabled the administrator user and now I am not able to start my laptop as when I try to boot my laptop it says disabled administrator.

    I disabled the administrator since the since the link "my computer / manage / local user and groups / user / administrator / properties." Now I am not been able to start my laptop. When I try to start the laptop, it shows the administrator user is disabled.

     
    Please help with a solution

    Biju
    New Delhi

    You must restore your registry to a point in time before that you have disabled the administrator user.  It is not easy if there is any left on the system administrator user.

    One way to do this is to start your computer from a CD rescue-style such as BartPE and UBCD4Win or Linux Livecd such as Knoppix.  You can then follow the steps in the following article from part 2, step 6, using GUI to copy and rename the files rather than orders from command-line specified in article.

    "How do I recover from a corrupted registry that prevents Windows XP startup"
      <>http://support.Microsoft.com/kb/307545 >

    If you are not experienced, I recommend to get help.

    HTH,
    JW

  • SIRS; have not been able to access CC 2015 for all day; the little dotted wheel starts to turn. Is there a problem?  Thank you

    SIRS; have not been able to access CC 2015 for all day; the little dotted wheel begins to turn without opening... Is there a problem?

    Does not open App | Wheels of progress turn continuously

    https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html

Maybe you are looking for