has not been able to start opmnctl after upgrade

Similar Questions

• has not been able to start installing oracle

  I am using a computer hp laptop with Vista Home Basic preinstalled. I had it demoted xp - pro and tried to install oracle10g and oracle 8, but none of them succeeded. When I click on the file setup.exe, the process does not start. in fact, I have observed in the Manager tasks that the setup.exe file is included once I start the installation, but within one or two seconds, the process ends automatically. I couldn't guess where is the problem. Please help me to install oracle. Thank you.
  
  Published by: user10731891 on December 21, 2008 06:24

  No, don't remove anything yet :). You can change your tnsnames.ora entry and change the port to 1521 by 1522 and give it a try.

  Also how many times you have oracle database?

  You can go to the control panel-->---> services--> and loook for the administration tools (for example the oracleServiceORCL and the like if everything) and for the listener something like this OracleOraDb10g_home1TNSListener. You can always delete old listner using netcca. You can see under (for example C:\Oracle\product\10.2.0\admin\orcl\bdump\alert... Log in to the file of the error messages or post here the last 20 lines of alert.log.

  concerning

  Published by: OrionNet on December 22, 2008 14:41

• has not been able to start netproj.exe

  I have windows 8 pro 32-bit wmc, and when I get netproj and start it, nothing happends. I tried to start as administrator but nothing happends don't too. problems with compatibility solves nothing. Hat so I need to do?

  I got the answer in another forum: go to settings, then search for the functions of the windows system (or how is in English, here you can activate the functions we or off) and alowe here this function

• Not be able to start DB after the addition of node

  Hi all
  
  I added node RAC3 successfully in 11 GR Platfiorm RHEL5 2 RAC
  
  When starting DB, I get the below error
  

  [root@rac1 bin]# ./srvctl status database -d dev
  Instance dev1 is not running on node rac1
  Instance dev2 is not running on node rac2
  Instance dev3 is not running on node rac3
  [root@rac1 bin]# ./srvctl start database -d dev
  PRCR-1079 : Failed to start resource ora.dev.db
  ORA-29760: instance_number parameter not specified
  CRS-2674: Start of 'ora.dev.db' on 'rac3' failed
  CRS-2632: There are no more servers to try to place resource 'ora.dev.db' on that would satisfy its placement policy
  [root@rac1 bin]# ./srvctl status database -d dev
  Instance dev1 is running on node rac1
  Instance dev2 is running on node rac2
  Instance dev3 is not running on node rac3
  [root@rac1 bin]# 

  [root@rac1 bin]# ./srvctl start database -d dev
  PRCR-1079 : Failed to start resource ora.dev.db
  ORA-29760: instance_number parameter not specified
  CRS-2674: Start of 'ora.dev.db' on 'rac3' failed
  CRS-2632: There are no more servers to try to place resource 'ora.dev.db' on that would satisfy its placement policy

  Please suggest me...

  Hello

  Dev3.thread = 3

  dev1.thread = 1
  DEV2.thread = 1 >

  Change the dev2.thread = 2 and check

• I had blocked some shippers and has not been able to 'remove' to my list of "blocked senders". What should I do?

  I use Windows XP and Outlook Express.  I put some e-mail addresses on my "list of blocked senders," using "Messages". When I tried to 'remove' some of my 'list of blocked senders' email addresses, they kept reappearing. and, I was not allowed to 'remove' some e-mail addresses of my 'blocked senders list,' on ' the Nations United-block ' them.  Is there some way I can 'remove' some addresses my "list of blocked senders," in order to "the Nations United-block" them? What should I do?

  Hi ittybit,.

  Follow the steps proposed by Bruce Hagen Sunday, August 29, 2010 16:42 from the link below and check if it helps you to solve the problem.

  Link:http://social.answers.microsoft.com/Forums/en-US/xpdesktop/thread/61f17c00-a007-43bc-9157-86656892718a

  Important: The instructions above contain steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CloudFront has not been able to connect to the original message

  Please can someone help resolve this error CloudFront. So I put by mistake the https:// Protocol before my email Web sites when I wanted to check the certificate. And after that when I tried to bypass it by adding the exception for the site I wanted to visit. In the process, I forgot to remove the https:// Protocol addresses, but now I get this message if someone could help me fix this problem I liked him a lot.

  Thank you.

  This doesn't seem to be the correct site - these are the addresses indexed by Google:

  https://www.efficientlearning.com/CPA/

  https://www.efficientlearning.com/login

  I get the same error, even if I get a green latch on these pages, so there's something a little different on your connection that is somehow pulling images within the page to an HTTP connection. ???

• programs do not appear in the start menu after upgrading windows 7

  Please, I beg you! I need help.  I got Vista with this PC from nine a year ago but recently installed upgrading Windows 7.  My programs or files do not appear, and there is a file with something like Windows.old and when I opened it presents the information I had before, but how do I transfer to see what I did to Start Up.  Also, it does not show programs like Word, powerpoint, Excel, etc.

  Window update has nothing to do with the upgrade of Windows. Posting here instead of assistance: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  But I can tell you that you will need to reinstall all third-party software because you did a 'custom (Advanced) upgrade' to Win7 (vs an upgrade in Place). Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Last Formsapp.ear has NOT been deployed * deploy the last EAR file... after upgradation

  Hello

  After reclassification EBS 12.1.1 to 12.1.3, underside to cause:

  Service control script execution:

  /U01/app/appltest/test/inst/apps/TEST_cch1udpor1/Admin/scripts/adformsctl.sh start

  script gave:

  ****************************************************

  You are running version 120.16.12010000.3 adformsctl.sh

  From successful OPMN FORMS OC4J instance...

  Call txkChkFormsDeployment.pl to check if the last FORMSAPP. EAR is deployed...

  Program: /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkChkFormsDeployment.pl started @ MON Aug 10 14:36:09

  2015

  Log file = / u01/app/appltest/TEST/inst/apps/TEST_cch1udpor1/logs/appl/rgf/T2K/txkChkFormsDeployment_Mon_Aug_10_14_36_08_2015/t.

  xkChkFormsDeployment_Mon_Aug_10_14_36_08_2015.log

  File "/ u01/app/appltest/TEST/apps/tech_st/10.1.3/j2ee/forms/applications/forms/formsweb/WEB-INF/lib/frmsrv.jar" exists. Procedure

  to check the size...

  =================================================

  Last Formsapp.ear has NOT been deployed *.

  The last EAR file deployment...

  =================================================

  Complete program: /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkChkFormsDeployment.pl @ MON Aug 10 14:36:

  17 2015

  *****************************************

  *             W A R N I N G             *

  *****************************************

  Error when running the perl script txkChkFormsDeployment.pl

  We have determined that you need to redeploy forms (txkChkFormsDeployment.pl).

  But can't do it automatically for you, due to some problems.

  For more information, see the log files.

  Follow Note: 397174.1 to manually redeploy the forms.

  *****************************************

  adformsctl.sh: exit with status 0

  According to the MOS Doc: deployment of a new EAR in Release 12 Oracle Applications file (Doc ID 397174.1),

  tried to manually deploy after changing the admin password OC4J showing the error message below:

  Perl $FND_TOP/bin/txkrun.pl-script = CfgOC4JApp

  ALL OF THE FOLLOWING FILES ARE NEEDED TO RESOLVE ERRORS

  Logfile = /u01/app/appltest/TEST/inst/apps/TEST_cch1udpor1/logs/appl/rgf/TXK/txkCfgOC4JApp_Mon_Aug_10_14_33_35_2015.log

  Program: /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl started @ MON Aug 10 14:33:35 2015

  Logfile = /u01/app/appltest/TEST/inst/apps/TEST_cch1udpor1/logs/appl/rgf/TXK/txkCfgOC4JApp_Mon_Aug_10_14_33_35_2015.log

  Enter the name of the Application for the redevelopment? Forms

  Enter password Oc4j Instance redeployment?

  Run < yes/no > Autoconfig? NO.

  *****************************************************

  Values required to start the instance OC4J "forms":

  ====================================================

  s_formsstatus = active

  s_forms_nprocs = 1 (the value must be greater than 0)

  Existing values in the context file:

  ======================================

  s_formsstatus = active

  s_forms_nprocs = 1

  ----------------------------------------------

  Values for environment variables are VALID *.

  ----------------------------------------------

  *****************************************************

  Stop all processes OPMN.

  OPMN stopped.

  Encounter errors running /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl

  FATAL ERROR *.

  PROGRAM: U01/APP/APPLTEST/TEST/APPS/APPS_ST/APPL/FND/12.0.0/PATCH/115/BIN/TXKCFGOC4JAPP.PL(/U01/APP/APPLTEST/TEST/APPS/APPS_ST/APPL/FND/12.0.0/BIN/TXKRUN.PL)

  TIME: Mon Aug 10 14:33:51 2015

  FUNCTION: TXK::Process:run [level 3]

  MESSAGES:

  Command error: < rc > = 32512, < order > = /u01/app/appltest/TEST/apps/tech_st/10.1.3/opmn/bin/opmnctl start

  STACK TRACE

  TXK::error:Abort ('TXK::Error', 'HASH (0x91224c8)') called at /u01/app/appltest/TEST/apps/apps_st/appl/au/12.0.0/perl/TXK/Common.pm line 299

  TXK::common:doError ('TXK::Process = HASH (0xa09d544) ',' command error: < rc > = 32512, < order > = u01/app/appltest/TE...','undef') called at /u01/app/appltest/TEST/apps/apps_st/appl/au/12.0.0/perl/TXK/Common.pm line 314

  TXK::common:SetError ('TXK::Process = HASH (0xa09d544) ',' command error: < rc > = 32512, < order > = / u01/app/appltest/TE...) ") called at /u01/app/appltest/TEST/apps/apps_st/appl/au/12.0.0/perl/TXK/Process.pm line 449 '

  TXK::process:run ('TXK:Process = HASH (0xa09d544)', 'HASH (0x9662e98)') called at /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl line 1587

  TXK::RunScript:execOPMNControl ('HASH (0x992a29c)') called at /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl line 599

  need to /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl called at /u01/app/appltest/TEST/apps/apps_st/appl/au/12.0.0/perl/TXK/RunScript.pm line 105

  TXK::RunScript::require('TXK::RunScript','/U01/app/appltest/test/apps/apps_st/appl/FND/12.0.0/patch/115...') called at /u01/app/appltest/TEST/apps/apps_st/appl/au/12.0.0/perl/TXK/Script.pm line 177

  eval {...} called at /u01/app/appltest/TEST/apps/apps_st/appl/au/12.0.0/perl/TXK/Script.pm line 177

  TXK::script::run('TXK::script=hash(0x9a0e164)','/U01/app/appltest/test/inst/apps/TEST_cch1udpor1/logs/appl/RG...','/U01/app/appltest/test/apps/apps_st/appl/FND/12.0.0/patch/115...') called at /u01/app/appltest/TEST/apps/apps_st/appl/fnd/12.0.0/bin/txkrun.pl line 174

  For this according to the MOS doc: error during deployment formsapp.ear file in an Instance of Apps R12 (Doc ID 1074765.1), updated the opmn.xml not record as no chance.

  Manually deploying display above error message.

  Here in the opmn.xml file we gave realhost.domain.com and virtualhost.domain.com both are same host name. Please advise us if this is not correct.

  Details of the environment:

  EBS: 12.1.3 with DB: 11.1.07

  OS: RHEL 5 x86_64

  Recent changes: EBS has enhanced 12.1.1 to 12.1.3

  Please let know us...

  Thanks in advance,

  Kind regards

  903079

  Please review and implement the steps in Note how to manually deploy forms file Ear (Doc ID 1961805.1)

• Firefox has not been started. I downloaded a new. the icon is crossed out. How can I fix?

  March 25, 2011
  I'm on a Mac OS X (power pc)
  After rebooting my computer today. Firefox has not been started. I clicked on the icon, it has begun to initiate and then stopped before that something happened.

  To try to solve the problem, I trashed the application and downloaded a new. He gave me a message: "the Firefox application cannot be launched-10661."

  I retried the download and the second time, the Firefox application icon has been crossed out. It's a circle with a bar slash on it. Same message arrives.

  Sorry, Firefox 4 is not available for Mac PowerPC. You can re - install the previous version from here:
  http://www.Firefox.com/all-older.html

  Or you can find a non-official version of Firefox 4 for PowerPC here: http://www.floodgap.com/software/tenfourfox/

• After scanning essentials security said my computer has not been scanned and it is not protected

  After that says security essentials scan my computer has not been digitized and is not protected. It is on a weekly auto scan and does not work. Why

  Hi Pat,

  Thanks for choosing Windows 8 and welcome to the Community Forums of Microsoft.

  According to the description provided, automatic scanning of Microsoft Security Essentials not happens on your computer.

  1. What is the operating system on your computer?
  2. you use security software?
  3. did you of recent changes to the computer?

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

  Method 1:

  
  Uninstall program anti-virus and check if it helps.

  How to uninstall antivirus or antispyware programs?

  http://Windows.Microsoft.com/en-us/Windows/how-do-i-uninstall-antivirus-or-antispyware-programs

  Important: Antivirus software can help protect your computer against viruses and other security threats.

  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  1. to run, the PC must be on and connected to the internet (it cannot be stopped, "standby mode", hybrid sleep or Hibernate mode)
  2. saving settings must be such that the PC not to close or to go asleep during analysis.
  3 analyses do not begin precisely when demand - some may start earlier or later than the officially set time hour (according to Microsoft servers and charges at the time).

  You can also refer to the article mentioned below for more information.

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If Microsoft Security Essentials problem or if you experience problems of Windows in the future, let us know and we would be happy to help you.

• After the last update of xp, we have not been able to change user without password. What do we do?

  Original title: change user

  After the last update of xp, we have not been able to change user without password. We do not know the password. What can we do?

  See if that helps...
  Cannot lock a "locked" computer administrator
  Be sure to check your screen savers.

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• ODI-1226: Error_log_procedure step fails after 1 attempt. ODI-1232: the execution of the procedure error_log_procedure failed. ODI-1246: the logical schema has not been defined for error_log_procedure.

  I created a procedure running during the mapping fails but I am facing this error

  ODI-1226: Error_log_procedure step fails after 1 attempt.

  ODI-1232: the execution of the procedure error_log_procedure failed.

  ODI-1246: the logical schema has not been defined for error_log_procedure.

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:754)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:730)

  at oracle.odi.runtime.agent.execution.SessionTask.getExecutor(SessionTask.java:239)

  at oracle.odi.runtime.agent.execution.SessionTask.processTask(SessionTask.java:152)

  at oracle.odi.runtime.agent.execution.SessionTask.doExecuteTask(SessionTask.java:111)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.execute(AbstractSessionTask.java:864)

  to oracle.odi.runtime.agent.execution.SessionExecutor$ SerialTrain.runTasks (SessionExecutor.java:2024)

  at oracle.odi.runtime.agent.execution.SessionExecutor.executeSession(SessionExecutor.java:562)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:718)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:611)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:203)

  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doProcessStartAgentTask(TaskExecutorAgentRequestProcessor.java:800)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 1400 (StartSessRequestProcessor.java:74)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:702)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:180)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:108)

  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:471)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at java.util.concurrent.FutureTask.run(FutureTask.java:262)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)

  at java.lang.Thread.run(Thread.java:724)

  Navigate to the ODI object with the name error_log_procedure , which I assume is an ODI procedure. On the target tab (and if this source) make sure that you have specified a logical schema in the appropriate drop-down box

• SIRS; have not been able to access CC 2015 for all day; the little dotted wheel starts to turn. Is there a problem?  Thank you

  SIRS; have not been able to access CC 2015 for all day; the little dotted wheel begins to turn without opening... Is there a problem?

  Does not open App | Wheels of progress turn continuously

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html

• I need to clean the registry because it has not been done in a long time.

  I need to clean the registry because it has not been done in a long time.  I can't find any software cleaner that cleans all teasers just identify errors and clean up maybe 3 things, but you need to buy to do it all.

  What can I do?

  Do not.  He didn't need it and even if you deleted 1000 things from him (doubtful) it would make little or no impact on performance.

  If you don't understand the registry enough to know what to erase manually or how to add things yourself, etc. - using a tool that almost arbitrarily find the things that are supposed to be orphaned or not necessary and confidence (for some reason any) can lead to a system of death.

  If you just * have to * ("it's a moral imperative") and then use that integrated with CCleaner.  I generally recommend not even consider using its registry "cleaning" component - but in the many times I used to analyze and find things and go through them manually before I remove them (at least - I've seen ~ 250 entries, he suggested to get rid of and even in this case, my manual check led me to delete all and there was no adverse) I didn't it go wrong.  If you * MUST * do it, use it and save your changes, so you might be able to roll back.  Before do you all - make sure your backups are in order.

  Want generally cleaning XP and maybe actually get a performance gain?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.