has not been able to start netproj.exe

Similar Questions

• has not been able to start installing oracle

  I am using a computer hp laptop with Vista Home Basic preinstalled. I had it demoted xp - pro and tried to install oracle10g and oracle 8, but none of them succeeded. When I click on the file setup.exe, the process does not start. in fact, I have observed in the Manager tasks that the setup.exe file is included once I start the installation, but within one or two seconds, the process ends automatically. I couldn't guess where is the problem. Please help me to install oracle. Thank you.
  
  Published by: user10731891 on December 21, 2008 06:24

  No, don't remove anything yet :). You can change your tnsnames.ora entry and change the port to 1521 by 1522 and give it a try.

  Also how many times you have oracle database?

  You can go to the control panel-->---> services--> and loook for the administration tools (for example the oracleServiceORCL and the like if everything) and for the listener something like this OracleOraDb10g_home1TNSListener. You can always delete old listner using netcca. You can see under (for example C:\Oracle\product\10.2.0\admin\orcl\bdump\alert... Log in to the file of the error messages or post here the last 20 lines of alert.log.

  concerning

  Published by: OrionNet on December 22, 2008 14:41

• has not been able to start opmnctl after upgrade

  Dear Experts,

  
  

  I'm done to upgrade the R12.1.1 DB 11.1.0.7 to 11.2.0.4 ebs.

  
  

  I started database and listener, but when you try to start the service application I got the following error in adopmnctl.txt.
  

  
  

  
  

  LPX-00202: couldn't open "/ u01/applr12/inst/apps/VIS_ebsvm/ora/10.1.2/opmn/conf/opmn.xml" (error 200)

  XML parsing failed: error 202.

  opmnctl: opmn.xml validation failed.

  any help,

  Kind regards

  Ahmad,

  solution found in this article

  Opmnctl command fails with the error "a file or a directory in the path name is not." or "LPX-00202:" (Doc ID 756573.1)

  Thanks for all of the Oracle community special sanae & Hussein.

• I had blocked some shippers and has not been able to 'remove' to my list of "blocked senders". What should I do?

  I use Windows XP and Outlook Express.  I put some e-mail addresses on my "list of blocked senders," using "Messages". When I tried to 'remove' some of my 'list of blocked senders' email addresses, they kept reappearing. and, I was not allowed to 'remove' some e-mail addresses of my 'blocked senders list,' on ' the Nations United-block ' them.  Is there some way I can 'remove' some addresses my "list of blocked senders," in order to "the Nations United-block" them? What should I do?

  Hi ittybit,.

  Follow the steps proposed by Bruce Hagen Sunday, August 29, 2010 16:42 from the link below and check if it helps you to solve the problem.

  Link:http://social.answers.microsoft.com/Forums/en-US/xpdesktop/thread/61f17c00-a007-43bc-9157-86656892718a

  Important: The instructions above contain steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CloudFront has not been able to connect to the original message

  Please can someone help resolve this error CloudFront. So I put by mistake the https:// Protocol before my email Web sites when I wanted to check the certificate. And after that when I tried to bypass it by adding the exception for the site I wanted to visit. In the process, I forgot to remove the https:// Protocol addresses, but now I get this message if someone could help me fix this problem I liked him a lot.

  Thank you.

  This doesn't seem to be the correct site - these are the addresses indexed by Google:

  https://www.efficientlearning.com/CPA/

  https://www.efficientlearning.com/login

  I get the same error, even if I get a green latch on these pages, so there's something a little different on your connection that is somehow pulling images within the page to an HTTP connection. ???

• Firefox has not been started. I downloaded a new. the icon is crossed out. How can I fix?

  March 25, 2011
  I'm on a Mac OS X (power pc)
  After rebooting my computer today. Firefox has not been started. I clicked on the icon, it has begun to initiate and then stopped before that something happened.

  To try to solve the problem, I trashed the application and downloaded a new. He gave me a message: "the Firefox application cannot be launched-10661."

  I retried the download and the second time, the Firefox application icon has been crossed out. It's a circle with a bar slash on it. Same message arrives.

  Sorry, Firefox 4 is not available for Mac PowerPC. You can re - install the previous version from here:
  http://www.Firefox.com/all-older.html

  Or you can find a non-official version of Firefox 4 for PowerPC here: http://www.floodgap.com/software/tenfourfox/

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• software Adobe reader cannot open any .exe he says this isn't a supported file or it has been damaged it is to say files sent in e-mail attachment that has not been correctly decoded

  I am trying to open my Security Center, adobe reader opens and says this isn't a supported file or it has been damaged in an e-mail attachment that has not been decoded correctly, this happens when I try to open any program

  Hello

  ·         You have made no changes to the computer until the problem occurred?

  Method 1:

  I suggest to uninstall Adobe reader software and then try to install adobe.

  You can also check: http://forums.Adobe.com/thread/392355

  To install adobe, visit the link: http://get.Adobe.com/reader/otherversions/

  Method 2:

  You can also follow the link below and check if this can help:

  http://support.Microsoft.com/kb/950505

• SIRS; have not been able to access CC 2015 for all day; the little dotted wheel starts to turn. Is there a problem?  Thank you

  SIRS; have not been able to access CC 2015 for all day; the little dotted wheel begins to turn without opening... Is there a problem?

  Does not open App | Wheels of progress turn continuously

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html

• I need to clean the registry because it has not been done in a long time.

  I need to clean the registry because it has not been done in a long time.  I can't find any software cleaner that cleans all teasers just identify errors and clean up maybe 3 things, but you need to buy to do it all.

  What can I do?

  Do not.  He didn't need it and even if you deleted 1000 things from him (doubtful) it would make little or no impact on performance.

  If you don't understand the registry enough to know what to erase manually or how to add things yourself, etc. - using a tool that almost arbitrarily find the things that are supposed to be orphaned or not necessary and confidence (for some reason any) can lead to a system of death.

  If you just * have to * ("it's a moral imperative") and then use that integrated with CCleaner.  I generally recommend not even consider using its registry "cleaning" component - but in the many times I used to analyze and find things and go through them manually before I remove them (at least - I've seen ~ 250 entries, he suggested to get rid of and even in this case, my manual check led me to delete all and there was no adverse) I didn't it go wrong.  If you * MUST * do it, use it and save your changes, so you might be able to roll back.  Before do you all - make sure your backups are in order.

  Want generally cleaning XP and maybe actually get a performance gain?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Update on a laptop that has not been used in almost 1 year

  My husbands cell phone has not been used since last October. He was diagnosed with leukaemia, shortly after he had and has not shown an interest to learn to use it until now. It has Windows 8 and we want to do the free update of Windows 10. The laptop wants to 79 updates before we start download Windows 10. He has been on and downloading these updates for more than 3 hours and the screen still says 0% complete. Is it normal to take so long after being unused for so long? Husband and I went to the challenge of the technology. Any help is greatly appreciated.

  There are many updates and update process may take several hours. You can suddenly find that updates show that almost complete.

  If there is anything on the laptop that you want to keep:

  Download and create a Windows 8.1 installation media and do a clean install of it. See creating installation for Windows 8.1 media. Accepting any offer to install updates during installation. 8.1 Windows installation media last will accept the keys to Windows 8. If your key is in the BIOS of the laptop, it will be detected automatically.

  At the end of the installation, you will be prompted to upgrade to Windows 10 and will be able to do an immediate upgrade Windows 10 without updating the Windows 8.1 installation.

  Visit the support of the manufacturer of your laptop to see if there are model specific drivers you need. Installing Windows 8.1 and 10 will not provide the latest drivers.

  If you want to keep the existing installed applications and files, you can create 8.1 Windows installation media and run the setup.exe on it then in Windows 8.

• iTunes has not been installed correctly. Error 7 (Windows error 126)

  I tried to update itunes and I get the following error. ---------------------------

  iTunes.exe - Unable to locate component
  ---------------------------
  This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem.
  ---------------------------
  Ok
  ---------------------------
  When I try to re - stall get the same error.
  ---------------------------

  iTunes

  ---------------------------

  iTunes has not been installed correctly.  Please reinstall iTunes.

  Error 7 (Windows error 126)

  ---------------------------

  Ok

  ---------------------------
   
  Original title: itunes problem

  Hello

  Uninstall everything according to the instructions from Apple:

  "Remove and reinstall iTunes and the components of the software for Windows 7 and later versions.

  https://support.Apple.com/en-AU/HT204275

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• KB936330 custody relocation, uanable to install Norton 360, error that it is not compatible because service pack 1 has not been installed

  Original title: KB936330 custody relocation

  After starting without error black screen display problems indicating "start with vista or run diagnostics" etc. I did a full restore. A few problems with windows update which has finally been overcome themsevlves except 1. Service pack KB936330 continued to come as needing to be installed although the "installed updates watch it 8 times successfully installed.". When I try to reinstall Norton 360 I get error that it is not compatible because service pack 1 has not been installed. Run Microsoft Fixit and found the updates installed in different place and has been corrected, but problem persists.

  Hello

  1. you receive an error message?

  2 are you able to install other updates successfully?

  Check out the following link to check the status of the Service pack installed on your computer

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can follow the steps in the following article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Important: The article mentioned above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the following link:

  Back up the registry      

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  To install Norton 360, you can follow the process.

  Step 1:

  You can try to completely uninstall Norton 360.

  Check out the following link to uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Check the following link to install Norton 360 again.

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Post back with the results for you help more.

• Receiving a constant message that my device has not been installed.

  Driver driving me crazy

  When a friend tried to install a music program? device - I always get the message that the appliance has not been installed - is under windows\system32\newdev.exe. -How do I get this to stop start up?

  Hello

  See if this helps you; These are ways to delete startup programs entries, etc.:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570

  my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?

  I recommend you:

  Go to a command prompt:

  Start, all programs, accessories, command prompt.

  Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>

  Type exit (to close the elevated command prompt window)

  Reset

  See if that solves the problem.

  If not, run the update http://support.microsoft.com/kb/947821system tool >

  02:42:25 amUTC 23/08/11