not considered vpn Hamachi VPN

Similar Questions

• return and rotate not considered an editing tool

  It seems that the transformations flip and rotate are not considered changes.  So if I apply these changes I have no indication that this transformation has been applied.  I made a few transformations flip on some images, but not on the others until now, I have no way to return all return to their original state.  I've been scanning of slides and images require a horizontal flip transformation.  I would select all and tell Lightroom to examine the transformation on the original parameter.  I don't understand how to do this.  Help, please.

  Yes, it's a bit strange that you can not reset flip and turn.  Possible solutions:

  -Use the plugins Data Explorer or any filter to find all the pics that are turned 90, then unrotate them. Find all the photos that are rotated 90 and spilled - unrotated and the unflip.  Repeat for all 8 possibilities of rotation and flipping.

  -Use the free Exiftool.  Select all the photos and make metadata > save metadata to file.  Can do "exiftool-orientation = normal *" to reset the rotation and reversal of all files.  And then make some metadata > read metadata file. ExifTool is a steep learning curve, especially if you are not experienced with command line tools.

• When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  You must download and install the version of Acrobat Mac.

• Quiz questions answered not considered

  Hello

  I created a quiz of multiple choice with a few questions, but as I have preview (in a browser and in the section overview of the Cp project), or publish and read (same site), the answers I get are not considered, every time I get the message "You did not answer this question completely" when I go through the quiz after the score. The right question is properly selected on each slide, when I click on the circle to the left of the right question.

  Thank you for your help

  Manual

  Thank you very much for your help.

• Firefox does not not with VPN

  Since a few days ago, Firefox and Firefox Beta have been responsible not just any website, with the error 'server not found '. It's weird because everything was fine before, but now it will not charge with active VPN (but works perfectly well without him).
  All other browsers I've tried works perfectly well even if (Chrome stable and beta, opera, & Dolphin Browser).

  I'm on a Nexus 7 (2012) running KitKat and using the TunnelBear VPN via a VPN service we.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• OfficeJet Pro 8620: OJ Pro 8620 does not not via VPN

  My HP PSC 2355xi comes to die so I got a 8620 to replace.  I was able to get set up for home use without any problem.  However, I work from home and use a VPN to company with access to my local drives and printer.  The PSC worked pretty well through the VPN.  Sometimes I'd have a problem of port assignment, but I'd just change the port until I found the right one and things were fine.  I spent most of the afternoon on the phone with someone in my office and we just couldn't seem to work.  It still works fine on my local system.  Any ideas on what we can try?  Thank you.

  @TheHeretic

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are not familiar with messaging private forum please click here to learn more.

  Thank you
  Omar

• ACL ASA5540 does not not for VPN access.

  I'm under code 8,03 and have a simple VPN L2L configured between two sites. It is in fact a test config in my lab, but I'm unable to restrict traffic using an ACL inside.

  I used the VPN Wizard to do the config initial and then added an Interior (out) ACL to restrict traffic once the tunnel rises.

  The encryption card is as follows:

  access extensive list ip 164.72.1.128 outside_1_cryptomap allow 255.255.255.240 host SunMed_pc

  Then I have an ACL to limit traffic to ping GHC_laptop, telnet to GHC_switch and denying the rest:

  inside_access_out list extended access allowed icmp host host SunMed_pc GHC_Laptop

  inside_access_out list extended access permit tcp host SunMed_pc host GHC_switch eq telnet

  inside_access_out deny ip extended access list a whole

  However SunMed_pc can also ping at GHC_switch and can FTP to GHC_laptop even if the 3rd entrance to deny any meter increases when I do this.

  I have attached a Word document that has the entire config with a screenshot showing the ACL and the shots.

  Should I configured incorrectly, or is ACL ACL actually does not work as expected?

  You can still keep all the IP for your acl interesting traffic. If you delete the sysopt, then you would write access in your acl 'inside_access' like you did above.

  If you are going to have dozens of tunnels l2l and will limit all, then I just remove the sysopt and use the acl interface.

  There is another option. You can leave the sysopt and use a vpn-filter. It is explained here and can be applied to l2l.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080641a52.shtml

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/uz.html#wp1524559

• DNS server not responding not although vpn works.

  Hi, I am on Windows 7 and when I access my vpn, it can only access the sites it supports.  I can access is no longer at all sites and he said: no internet connection and DNS server does not respond.  What can I do?  Please, any suggestions?  Thank you!

  Hi ERamos64,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.

• Need help with attention not approved VPN server certificates.

  I've been on the many other posts about it, and they all seem a bit different, so I started my own thread.

  I was sent to my users via the ASA AnyConnect 3.1.02026, and we all get the warning of the Cert of untrusted when connecting VPN server.

  When the ASA deploys the client, it puts the external IP of the SAA as the host name, which causes the error.

  So I have two questions: 1. How can I get the ASA to make host name "vpn.cfo.com" when a user installs the client and 2. How can I change my cert so that it does not show the internal name of the ASA and use 'vpn.cfo.com' instead?

  Here are all the news that everyone should not (I) help to think

  SSL-trust ASDM_TrustPoint0 OUTSIDE_PRIMARY point

  Certificate

  Status: available

  Of the certificate number:

  Use of certificates: Signature

  Public key type: RSA (1024 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Name of the object:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Validity date:

  start date: 15:17:42 EDT June 2, 2011

  end date: 15:17:42 EDT May 30, 2021

  Trustpoints Associates: ASDM_TrustPoint0

  CA

  Status: available

  Of the certificate number:

  Certificate use: general use

  Public Key Type: RSA (2048 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  CN = VeriSign Class 3 Public Primary Certification Authority - G5

  or = (c) 2006 VeriSign\, Inc. - authorized only use

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  Name of the object:

  CN = VeriSign Class 3 Secure Server CA - G3

  OU = terms of use at https://www.verisign.com/rpa (c) 10

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  OCSP AIA:

  URL: http://ocsp.verisign.com

  CRL Distribution points:

  [1] http://crl.verisign.com/pca3-g5.crl

  Validity date:

  start date: 19:00:00 EST February 7, 2010

  end date: 18:59:59 EST February 7, 2020

  Trustpoints Associates: _SmartCallHome_ServerCA

  Any help would be greatly appreciated.

  Hello

  Cisco has made a strict checking of KU and EKU in recent versions of AnyConnect, which leads to the warning you got.

  To my knowledge, if you go to 3.1.00495, you will not get this warning, if not, you need to get the valid KU and EKU fields in your certificate of ASA.

  To use specific trustpoint, please check the 'truspoint ssl' command in global configuration mode.

  Mashal

• NetFlow not through VPN

  Here is my config on a Cisco 1841. The Netflow server is 10.11.1.61 which is behind an ISA firewall. The ISA firewall is configured to allow the 172.18.32.1 to 10.11.1.61 Netflow traffic. However, it never sees no traffic even attempt to reach the 10.11.1.61 of 172.18.32.1. Is there something missing in my router config?

  IP cef

  IP flow-cache timeout idle 10
  IP flow-cache timeout active 1

  interface FastEthernet0/0
  IP 172.18.32.1 255.255.255.0
  route IP cache flow
  IP nat inside

  The FastEthernet0/0 flow-export source IP
  IP flow-export version 5
  10.11.1.61 IP flow-export destination 9996

  NAT extended IP access list
  deny ip any 10.11.0.0 0.0.255.255
  IP 172.18.32.0 allow 0.0.0.255 any

  list of IP - VPN access scope
  IP 172.18.32.0 allow 0.0.0.255 10.11.0.0 0.0.255.255
  IP 172.18.32.0 allow 0.0.0.255 10.18.0.0 0.0.0.255
  IP 172.18.32.0 allow 0.0.0.255 10.15.1.0 0.0.0.255
  IP 172.20.32.0 allow 0.0.0.255 10.18.0.0 0.0.0.255

  Hello

  Could you add "exit-functions" under the flow of exporter configuration and try again?

  Thank you

  Wen

• What is and what is not considered a transparent object in Illustrator?

  Hi guys!

  A couple of years ago, I placed a picture hidden above a spot color in InDesign and this brought me some problems. A weird white box appeared between them and I lost my impression. A few days after the incident, I discovered that it is not recommended to place transparent objects above spot.

  Well, now in Illustrator, I don't know if I have the same problem if I place a clipping above one mask spot. I used the Flattener Preview to see my transparent objects and my clipping mask was not one of them, but I would like to know for sure: is a clipping mask (with a a tif) considered a transparent object in Illustrator? I have again the horrible white box? I really need to put this over the stain of color clipping mask.

  I'm fair to assume that transparent objects in Illustrator:

  1. Mixture of the effects
  2. Shadows, etc.
  3. Mask with LAMINATED clipping objects

  ?

  Adobe has a white paper that explains this better:

  http://partners.Adobe.com/public/ASN/en/print_resource_center/TXPGuide.PDF

  Yes the 3 elements you mention create transparency.

  Explore the window > overview of flattening

  Which should prove to be more useful than a long answer.

  

  Is your problem with a test print composite color (e.g.: color laser printer), or printing of separations?

• CBO bug or not, or else develop do not consider the function index

  SQL> create table test_fun_or as select object_id+sysdate id,object_name from        
  
    2  dba_objects;
  
  Table created.
  
  SQL> create index i_test_fun_or on test_fun_or(id,'a') nologging;   
  
  //I don't know why oracle consider it as function index
  
  Index created.
  
  SQL> create index i_test_fun_or_1 on test_fun_or(object_name) nologging;
  
  Index created.
  
  SQL> set autot trace exp
  
  SQL> exec dbms_stats.gather_table_stats(user,'TEST_FUN_OR',estimate_percent=>null,method_opt=>'for all columns size 1');
  
   
  
  PL/SQL procedure successfully completed.
  
   
  
  SQL> select * from test_fun_or where id=sysdate or object_name='aa';
  
   
  
  Execution Plan
  
  ----------------------------------------------------------
  
  Plan hash value: 3247456674
  
   
  
  ---------------------------------------------------------------------------------
  
  | Id  | Operation         | Name        | Rows  | Bytes | Cost (%CPU)| Time     |
  
  ---------------------------------------------------------------------------------
  
  |   0 | SELECT STATEMENT  |             |     3 |    87 |   219   (3)| 00:00:03 |
  
  |*  1 |  TABLE ACCESS FULL| TEST_FUN_OR |     3 |    87 |   219   (3)| 00:00:03 |
  
  ---------------------------------------------------------------------------------
  
   
  
  Predicate Information (identified by operation id):
  
  ---------------------------------------------------
  
   
  
     1 - filter("OBJECT_NAME"='aa' OR "ID"=SYSDATE@!)
  
   
  
  SQL> select /*+ use_concat */ * from test_fun_or where id=sysdate or object_name='aa'; 
  
  //or expand don't use index i_test_fun_or
  
   
  
  Execution Plan
  
  ----------------------------------------------------------
  
  Plan hash value: 3161566054
  
   
  
  ------------------------------------------------------------------------------------------------
  
  | Id  | Operation                    | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
  
  ------------------------------------------------------------------------------------------------
  
  |   0 | SELECT STATEMENT             |                 |     3 |    87 |   224   (3)| 00:00:03 |
  
  |   1 |  CONCATENATION               |                 |       |       |            |          |
  
  |*  2 |   TABLE ACCESS FULL          | TEST_FUN_OR     |     1 |    29 |   219   (3)| 00:00:03 |
  
  |*  3 |   TABLE ACCESS BY INDEX ROWID| TEST_FUN_OR     |     2 |    58 |     5   (0)| 00:00:01 |
  
  |*  4 |    INDEX RANGE SCAN          | I_TEST_FUN_OR_1 |     2 |       |     3   (0)| 00:00:01 |
  
  ------------------------------------------------------------------------------------------------
  
   
  
  Predicate Information (identified by operation id):
  
  ---------------------------------------------------
  
   
  
     2 - filter("ID"=SYSDATE@!)
  
     3 - filter(LNNVL("ID"=SYSDATE@!))
  
     4 - access("OBJECT_NAME"='aa')
  
   
  
  SQL> drop index i_test_fun_or;
  
   
  
  Index dropped.
  
   
  
  SQL> create index i_test_fun_or on test_fun_or(id,object_name) nologging;
  
   
  
  Index created.
  
   
  
  SQL> alter table test_fun_or modify object_name not null;
  
   
  
  Table altered.
  
   
  
  SQL> select /*+ use_concat */ * from test_fun_or where id=sysdate or object_name='aa';
  
   
  
  Execution Plan
  
  ----------------------------------------------------------
  
  Plan hash value: 1705821130
  
   
  
  ------------------------------------------------------------------------------------------------
  
  | Id  | Operation                    | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
  
  ------------------------------------------------------------------------------------------------
  
  |   0 | SELECT STATEMENT             |                 |     3 |    87 |     8   (0)| 00:00:01 |
  
  |   1 |  CONCATENATION               |                 |       |       |            |          |
  
  |*  2 |   INDEX RANGE SCAN           | I_TEST_FUN_OR   |     1 |    29 |     3   (0)| 00:00:01 |
  
  |*  3 |   TABLE ACCESS BY INDEX ROWID| TEST_FUN_OR     |     2 |    58 |     5   (0)| 00:00:01 |
  
  |*  4 |    INDEX RANGE SCAN          | I_TEST_FUN_OR_1 |     2 |       |     3   (0)| 00:00:01 |
  
  ------------------------------------------------------------------------------------------------
  
   
  
  Predicate Information (identified by operation id):
  
  ---------------------------------------------------
  
      2 - access("ID"=SYSDATE@!)
  
     3 - filter(LNNVL("ID"=SYSDATE@!))
  
     4 - access("OBJECT_NAME"='aa')

  Jinyu wrote:
  Thanks Jonathan, I don't have 11.2.0.2 on-site, I'll test it later, I just test it on 11.2.0.1

  If you see the notes of fixed a bug fixes for 11.2.0.2 Group (Doc ID:1179583.1) it's bug 8352378 "allow index GOLD-Expansion functions.

  Concerning
  Jonathan Lewis

• Monetary values exported are not considered as numbers

  Hee guys.
  
  I asked this question to a fortnight before, but I don't really have an answer. I'm surprised that I'm the only one who has this problem, but our app works for most values monetary whith. And our relationships revolve around these figures. But whenever I have to download these reports go beyond monetary fields are considered text and I can't use any formula on these data. Even after I remove the currency symbol and change the number in a number field. I just don't understand!
  We treat the data in our reports and calculations to compare data with data that are not in CRM On demand. How do I when I can't use the reportingdata?
  
  Someone at - it ideas? The only solution I've found is by downloading as. CSV and then by placing 'model text' but it's a lot of your time
  
  Thanks in advance!

  Vincent,

  You can override the Data Format of reports, choose to display the value as Numbers.You can also choose to display in the form of currency and choose No symbol.
  In both cases the values will be considered digital in Excel.

  Kind regards

  Ingeborg

• WPA is not considered secure?

  I keep having started out of my wifi at home on my iphone 7, because WPA is not regarded as sufficiently safe? What I do need to update my router, or is there away around this?

  If you are using WPA, set up WPA2 security.

  If you meant WPA2, try to forget the WiFi network and join.

• Download timer estimate not updated until the file is made of 7/8, size of the file not considered and corrupt downloads!

  Sometimes when I download a file of the estimator download will not update until that file is downloaded about and made. It didn't happen in the previous versions, I think somewhere around v15? or whenever the new download manager has been implemented.

  Another problem is that the size of the file is unknown until mainly downloaded.
  (a.k.a. "calculation of the remaining time - x MB 103 MB (132 KB/s)")
  didn't matter what Internet connection I use, can not repeat on a local network download.
  Sometimes, I don't get on the servers really really really really really fast.

  Oh, and don't forget corrupt downloads!
  file will download as usual, but smaller than the total size who said that the Web site or the list dialog confirmation boxing. Download complete report manager!
  Ending up with a zip file or other file that will not open or run.

  No antivirus software, I run clean, safe and vigilant.

  I managed to get photos, take a look.
  https://www.dropbox.com/sh/gu2yiffrazxpasc/xVaAEH4Kod

  I use an extension to go back the look, feel and function of the old Download Manager, but it still isn't correct in new download manager.

  but as has been said elsewhere, I'm probably going to create a new profile so I hope that this will disappear when I finally get around to that?