Not correct table cell height

I have a table with 21 lines. All the other ranks are used as the delimiter between the rows with content. These split lines have nothing in them, and their height is set to 1 in the property inspector. I'm assuming that these heights and widths are in pixels, however, these lines seem not to be 1px in design mode, or on a web page. They are more like 15px.

How can I make these lines 1px in height?

This site has code severely malformed.

http://tinyurl.com/36z7sc8

I'm guessing he's hot-wired togather of various components and parts including the ChronoForm code?

On the heights of the cell, the code of a typical cell is:

The code between theTags (known as a non-breaking space) is a space character (press the SPACEBAR on the keyboard generates this code in the HTML code).

Remove the code space for eachwill cause your cells to collapse. You will need to open them with a GIF 1px high as suggested Murray prop.

Tags: Dreamweaver

Similar Questions

Table cell height 11 FM

Is there an easy way to control the height of a table cell? Is there a key combination that will allow me to move the bottom margin upwards or downwards, or do not develop until the last line of text?
Thank you
Bill

By default, the height of line expands with the content.

Use the Table > Format > row height to set a height of minimum and maximum line for selected rows:

Don't forget that you can control the margins of cell for the table in table designer > basic and properties by the paragraph by paragraph Designer tag > Table Cell properties. These margins might be useful to get the look are are after as well.

table cell height

Hello

I want to create a table with 1 column and many programitically lines where I can be able to change the height of each row. Somehow, I'm not able to do the same in LV2011. CCan you let me know the reason, why I am not able to do?

Thanks in advance!

A method like this? The attachment is saved for 2011 sice, this version is not installed on this computer I can't see if there is a real problem with the methodology in 2011

Table cell text will not align Center

Hello
I have a table in a CS5 file in which the top row contains the column names. I have turned this text to 270 ° and want to align in the Center on the text in the column below (which is aligned Center). Vertical alignment is on the Center. Alignment of a paragraph is left I want the text to sit at the bottom of the row.
When the columns are narrow enough that works OK but it does not work in larger columns; the text is always left of Center. Why is - it does not work as it should? As a matter of interest, I worked with some CS3 files where alignment is fine. When I open the CS5, however, as soon as I change the alignment will not.
Thank you

Your table cell is wider than it is tall? Then this is a known bug. It works fine as long as the height of the cell in the table is greater than its width. If it is wider, it aligns in a 'virtual square' (the sides equal at the height of the table cell). So if your table cell is 10 mm high and 20 mm wide, to 270 °-text align in a sqare 10x10mm. You can "fix" this behavior by adding a distance of 5 mm to the left and right of the table cell borders.

Cards Oracle does not work inside a table cell?
Hi all

I've been using Oracle cards without a table, but now I need to put the screen (& lt; div & gt ;) within a cell of table for organization purposes. I noticed that it is not simply a map if I put it here.

It works and displays the map:
```
<body onLoad="loadMainMap()">
      <div id="map_div" style="left:0px; top:0px; width:100%; height:100%; border:2px solid"></div>
</body>
```
It does not display the map (the table and div are there, but no map is displayed):
```
<body onLoad="loadMainMap()">
    <table>
        <tr>
        <td>
                <div id="map_div" style="left:0px; top:0px; width:100%; height:100%; border:2px solid"></div>
        </td>
        </tr>
    </table>
</body>
```
I'm doing something wrong?

Thanks in advance,
~ Ruben Jorge
The table does not have its specified size, its size is determined by its cells. The cell does not have the specified size, and its size is determined by its content, the map DIV DIV. size plan is 100%, 100%, which is proportional to the size of the table cell, which does not have a size. Thus, the browser guess its size is 0px, 0px.

To resolve this problem, you must specify the size of the table (relative or absolute), or the absolute size of the div. of card

< div id = "map_div" style = "left: 0px;" Top: 0px; Width: 100%; height: 100%; border: 2px solid "> < / div >"

Published by: jxyang on May 11, 2009 07:44

Cannot enlarge table overset cell height.

I'm working on a large format indesign document. I placed the text in a word document in indesign and am currently apply paragraph styles and table styles to make it bit more attractive.
However, I encountered a problem. I have some large table cells, covering the length of pages and more sometimes. For these same cells, the text appears in excess. So I want to drag the length of the cell to the bottom of my page but I can't.
This has nothing to do with the height of the cell value ' exactly... ". I checked that already.
Can anyone help? Extremely frustrating.
Thank you
Jude

Jugazza wrote:

This has nothing to do with the height of the cell value ' exactly... ". I checked that already.

What is the setting of the maximum height of the line?

How can we do the invisible table cells (but not content) in DW CS5?

How can you efficiently convert the table cells in invisible ones so that the content within these cells gets stand alone, visibility-wise, please? I looked at so many different orders of Dreamweaver CS-5, but none seem to do the trick, at least do not apparently potentially compromising the existing content somehow. Any thoughts, please?

Change

BORDER CELLPADDING = "0".

TO

BORDER = "0".

See what for you.

Gary

Tables restores do not correctly in Firefox
I recently spent in Dreamweaver 8 to CS4. I've also recently updated my Firefox 3.06. I've had this site for years, and it just started not rendering correctly tables in Firefox. What is happening on several pages it works fine in IE. http://www.WiW.uscourts.gov/bankruptcy/

Let me say at the outset, I know that the page is old (created in Front Page) he uses tables for layout instead of CSS. I hope to update soon, but for now I need a fix to get the pages work correctly.

Any help would be greatly appreciated!

Thank you
Becky

Hello

In the CSS of the USBC, remove this element:

TD {}
do-family: Arial, without serif.
float: right;
}

Take care
Tim

"bhanson" wrote in message
News:gp3ups$L6J$1@forums. Macromedia.com...
> I recently spent in Dreamweaver 8 to CS4. I've also recently updated my
> Firefox to 3.06. I've had this site for years, and it just started
> not
> render tables properly in Firefox. What happens on multiple pages
> It
> works fine in IE. http://www.WiW.uscourts.gov/bankruptcy/
>
> Let me say at the outset, I know that the page is old (created before the Page)
> It
> uses tables for layout instead of CSS. I hope to update soon,
> but
> now I need a fix to get the pages work correctly.
>
> Any help would be greatly appreciated!
>
> Thank you,
> Becky
>
>

Cell.Contents not correctly resolve the empty strings if in excess... Is this a Bug or me?

Greetings, Folks.
It's driving me crazy. I can reproduce the problem over and over again. I'm missing a reason why cell.contents would be assessed differently in the case of condition in excess than no? I don't understand...
Here is the scenario of. CS6, Win7, VB.Net (but the logic is simple so stay with me...).
Object in question is a line of 3 cells with values in the respective cells: text, double value, double the value.
Here's the problem. (gitc = 1 in all these test cases)
If Not HasValue (curRow.Cells(gitc + 1). Content) then
Here's the simple function called by the line above:
Private Function HasValue (value as object( ) As Boolean
If IsDBNull (value) OrElse value = "" Then Return Fake Else Return True
End Function
That is the problem. The code works as expected, provided that the referenced line is not in a State in excess, the object is a text value, and of two values, where the function returns an appropriate assessment. But if the line is in a State in excess, the object resolves in three empty strings ("" ") and as a result, the function returns the wrong assessment.
Here the rub. If I lie down (or shorten) the column that puts a DIFFERENT line in the place in excess, the same result occurs to this different line, so I know that's not the values.
Sorry for the long explanation, but I felt that it is important to give as much information as possible when you ask for help.
Thank you very much for any help and/or an overview.
TT

Ah, I am a JavaScripter, but the Council is good even if the syntax is incorrect.

The fact is that, if the cell is in excess and then its content is indeed empty. What is not empty is the subject of the text in the cell. You probably should look into it. In JavaScript is:

myCell.texts [0] .silence

Dave

Variable font inside a table cell properties

Hello
the following code works fine inside a text box:
```
with(textArea.insertionPoints) {
     for ( var iStringSection = 0; iStringSection < stringsAndStyles.length; iStringSection++ ) {
          lastItem().properties = {
               contents: stringsAndStyles[iStringSection].contents,
               fontStyle: stringsAndStyles[iStringSection].fontStyle
          }
     }
}
```
The style changes of fonts correctly for each segment of the chain. But if I try the same thing with a table cell (just replace textArea with the active cell, stays remains the same), the fontstyle will not change between segments of the chain. Is there a different approach to reach the variable font inside a table cell styles? Without the help of a new paragraph, the police is supposed to change on the same line.
Thank you very much!

done with (work myCell.texts [0])?

DW CS6 Valign a table cell?

I use DW since Macromedia days. I started my site Web to help teach yourself the publication of Laura Lemay Web with HTML 3, released in 1996. I learned HTML 3. I learned to use Dreamweaver. I have maintained my site without too many problems, relying on DW. Until the CS6.
Now I'm lost. I only want to vertically align a small icon (a 30 x 30 px JPEG) and 10-point in a table cell text. The cell is a length of three cells. The code looks like this:
< td colspan = "3" valign = "middle" >
"" < img src = "... / images/misc/little-stars/Tiny-Star-1.jpg" width = "30" height = "31" border = "0" >
< span class = "verdana10" > - in time for filming! (rules of < em > Dave < /em > clock!) </span >
< table >
It can be seen on the Web here. http://www.techno-Imaging.com/gal15summer/gal2015summer.html
I understand that does not support HTML5 valign = "middle" and that I should use a CSS style. But most browsers should be backwards compatible. I prefer to use the old code in this instance.
If I knew how to add a CSS class to my default style sheet I would.
TIA,-Dave

Do what you want to achieve? (Although course without border)

Remove the valign = "middle" and insert this code at the end of the img element:

"img src ="... / images/misc/little-stars/Tiny-Star-1.jpg "width ="30"height ="31"border ="0" style =" "vertical-align: middle;" "

Us-hh

Balancing the columns with grids of fluid and CSS3 'table-cell '.

I try to balance the height of by-side columns, and I'm happy to use ' display: table-cell "that I've seen work. But I can't make it work with DW flow layout grid. I have an example here: http://leighjackson-co-nz-dev.web4.pbstaging.com/htm/test-2a.htm
I want the right div, color, below the image, to be full height, identical to the div of the text to the left of it. It doesn't seem to work.
Any suggestions?

Sorry, CSS display: table does not work on the floating divs. The alignment is done with the width of the cells in the table, divs.

{#div1}

Width: 100%;

Auto margin: 0;

Display: table;

border-collapse: collapse;

}

#div2 {display: table-row;}}

{#div3}

Display: table-cell;

Width: 50%;

background: #D8E9B6;

vertical-align: top;

}

{#div4}

Display: table-cell;

Width: 50%;

background: #CCE6FF;

vertical-align: bottom;

}

HTML:

Content for the div3...

Content for the div3...

Content for the div3...

Content for the div3...

Content for the div3...

Content for div4 here...

Nancy O.

FM7.2: Problems with frame anchored in the rotated table cell

Hello O Experts,
I am facing a nasty problem with FrameMaker 7.2 for Windows with frames embedded in rotated table cells. I was wondering if any of you have seen this problem and know how to solve.
The problem is reproduced as follows:
1 create a table.
2. Add a small frame anchored "the point insertion" inside one of the cells.
3. Add a line of text to the anchored frame.
4 turn the cell by 90 degrees clockwise or counterclockwise.
Up to step 3, the anchored frame and the line of text behave as expected. Can I choose both the frame and the text line, move and resize. In all cases, they are displayed correctly.
After step 4, the following occurs:
- The content of the anchored image appear or is badly distorted.
- Is no longer, I can select or resize the anchored frame (if I try, FM acts irregularly and wildly moves the outline around the page).
- I can choose is no longer the line of text in the frame.
I enclose a file FM (created using integrated model "portrait" of FM) sample that illustrates the problem.
If someone knows this problem and I hope a solution, I would greatly appreciate it if you'd share. Thank you very much!

Michael,

If you turn just the anchored frame itself and not the cell (content) then everything behaves. If you have lots of content for the anchored frame, then place a block of text in the anchored frame, use a suitable paratag in text and only turn the framework anchored (all content will follow along then).

How to bind a table cell?

Hello
What would be the best way to link this table cell? I want the entire cell related rather than just the text inside.
< table width = "160" border = "0" align = "right" cellpadding = "5" cellspacing = "0" class = "backgroundbox-video" >
< b >
< td width = "167" align = "left" valign = "top" > < class p 'navheader-lg' = > Video Clip < /p >
< class p "navheader-sm" = > watch a short < br / >
video testimony < /p > < table >
< /tr >
Thank you very much
Laura

Of course, simply add the new image as a background in this selector:
```
.vidA a:hover{     background-color:#C4F894;        background-image: url(...);}
```
This might be a good time to mark this as so answered correctly the people who help will not need to click on this thread more. Thank you!
```
--

E. Michael Brandt

www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions

www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia

--
```

Dreamweaver displays does not correctly

Hello
I'm not an expert in any stretch of the imagination, Dreamweaver so it would not make sense, but I try anyway.
Many of my Web pages on my website display correctly online, but in dreamweaver, I don't see that the model in the design model. The main body of the page does not appear in the view either local or remote. The code is still there in design mode, but I find much easier to make adjustments with the design view, so it drives me crazy. Can anyone think of anything anyone likely to do? At least one of the relevant pages has changed recently, but the other did not. I'm really confused.
Thank you very much.

Of course that's the problem.

In your second line of the table cell requiredis may not have formed, and that's why all of the code after is was incompatible.

So DW is not sure what to show.

Need to fix that.

A trial could be as follows-
- Simply record your page once it is rendered in the browser as a .html page (using file > save from the browser itself).
- Now open the locally saved page in DW and edit.
- Copy it manuallycode as in the first line to the second line.
- View in design mode. If it is established correctly... then bingo that is the problem area.
Kind regards

Vinay

Not correct table cell height

Similar Questions

Maybe you are looking for