Cannot enlarge table overset cell height.
I'm working on a large format indesign document. I placed the text in a word document in indesign and am currently apply paragraph styles and table styles to make it bit more attractive.
However, I encountered a problem. I have some large table cells, covering the length of pages and more sometimes. For these same cells, the text appears in excess. So I want to drag the length of the cell to the bottom of my page but I can't.
This has nothing to do with the height of the cell value ' exactly... ". I checked that already.
Can anyone help? Extremely frustrating.
Thank you
Jude
Jugazza wrote:
This has nothing to do with the height of the cell value ' exactly... ". I checked that already.
What is the setting of the maximum height of the line?
Tags: InDesign
Similar Questions
-
Is there an easy way to control the height of a table cell? Is there a key combination that will allow me to move the bottom margin upwards or downwards, or do not develop until the last line of text?
Thank you
Bill
By default, the height of line expands with the content.
Use the Table > Format > row height to set a height of minimum and maximum line for selected rows:
Don't forget that you can control the margins of cell for the table in table designer > basic and properties by the paragraph by paragraph Designer tag > Table Cell properties. These margins might be useful to get the look are are after as well.
-
Microsoft Photo Editor - cannot enlarge the image
I use Photo Editor with Microsoft Windows XP Microsoft 2002 and cannot enlarge a photo and zoom in and zoom out. When I go to open a file and enlarge, I get a message saying "error reading file". I noticed that this only happens if the photo was taken with a digital camera, namely, Nikon Coolpix L20. I have no problem, expand and resize a picture taken with a 35mm camera. The two images are JPEG. Can someone tell me why this happens and what to do to solve the problem?
Editing software Photo MS error when trying to open the photos
more than 5.5 million pixels "error reading file".It was discovered by MichelDenie as the following
update causes this problem. Security update for
Microsoft Office XP (KB2289162).2289162 MSKB article indicates that the graphics
filters have been updated to versions November 16, 2010.That could very well be what caused incompatibility
with the old Ms Photo Editor(2289162) MS10-105: Description of the guarantee
Update for Microsoft Office XP: December 14, 2010
http://support.Microsoft.com/kb/2289162See the following thread for reading information.
Error reading file Photo Editor
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/error-reading-file-photo-editor/fcf2962c-b7ce-4051-b34d-ad1fa03ba3d8?page=2&TM=1316437279687Good luck...
-
Hey
I'm using jdev11
is anyone of you know how I can put 2 different tabels, one next to the other? (so it will look like one)
TNX
TalyaHello
You cannot merge tables so that they look the same. You can align them, but this alignment is not such that the lines are vertically aligned or synchronized scrolling. I suggest you to create a View object that comes from the 2 entities and then create the table from this point of view.
Frank
-
Hi all
Greetings...
The script below works perfectly in indesign CS3 to apply table and cell style. But in indesign CS4 shows runtime error. Kindly help me on this...
var myTable = app.activeDocument.stories.everyItem().tables; for (var n=0; n < myTable.length; n++) { myTable[n].appliedTableStyle = "Table Style 1"; myTable[n].cells.everyItem().appliedCellStyle = app.activeDocument.cellStyles.item("[None]"); myTable[n].cells.everyItem().clearCellStyleOverrides (true); alert(myTable[n].rows.length); for (var a = 1; a < myTable[n].rows.length - 2; ++a) { myTable[n].rows[a].cells.everyItem().appliedCellStyle = "T body"; alert(a); } myTable[n].rows[0].cells.everyItem().appliedCellStyle = "T col hd";//First Row myTable[n].rows[-1].cells.everyItem().appliedCellStyle = "T body bot";//Last Row }
Thank you
Knockaert
Hi Karthik,
Please try the JS Code below and come back.
var myTable = app.activeDocument.stories.everyItem().tables; for (var n=0; n < myTable.length; n++){ //~ myTable[n].appliedTableStyle = "Table Style 1"; //~ myTable[n].cells.everyItem().appliedCellStyle = app.activeDocument.cellStyles.item("[None]"); //~ myTable[n].cells.everyItem().clearCellStyleOverrides (true); // Please check the table cell styles name is correct or not? var myActiveTable = myTable[n]; myActiveTable.rows.itemByRange(0,-2).cells.everyItem().appliedCellStyle = "TB"; myActiveTable.rows[0].cells.everyItem().appliedCellStyle = "TCH";//First Row myActiveTable.rows.itemByRange(-2,-1).cells.everyItem().appliedCellStyle = "TBB";//Last Row }
the output of code js above looks like this snapshot.
THX
csm_phil
-
AppleScript to apply styles of table and cell in IDCS4
I have an Applescript script to format all the tables in a document as I want. It is adapted from a previous version that did not use styles, that works perfectly. This script creates styles if they are not present and this bit works fine, but when it starts to try to apply them to the tables, it falls.
tell application "Adobe InDesign CS4" tell active document set BlackColor to color "Black" set SolidStroke to stroke style "Solid" end tell tell active document try set myTablePara to paragraph style "4.2 Table text" on error set myTablePara to make paragraph style with properties {name:"4.2 Table text", applied font:"Helvetica Neue", font style:"Regular", point size:"8.5", leading:"10"} end try try set myBasicCell to cell style "Basic cell" on error set myBasicCell to make cell style with properties ¬ ¬ {name:¬ "Basic cell", bottom edge stroke weight:0 ¬ , bottom edge stroke color:BlackColor ¬ , bottom edge stroke type:SolidStroke ¬ , right edge stroke weight:0 ¬ , right edge stroke color:BlackColor ¬ , right edge stroke type:SolidStroke ¬ , top edge stroke weight:0 ¬ , top edge stroke color:BlackColor ¬ , top edge stroke type:SolidStroke ¬ , left edge stroke weight:0 ¬ , left edge stroke color:BlackColor ¬ , left edge stroke type:SolidStroke ¬ , left inset:¬ "0p4", right inset:¬ "0p4", top inset:¬ "0p4", bottom inset:¬ "0p4", vertical justification:top align ¬ , applied paragraph style:myTablePara} end try try set myHeader to cell style "Header" on error set myHeader to make cell style with properties ¬ {name:¬ "Header", based on:myBasicCell ¬ , bottom edge stroke weight:¬ "0.5pt", top edge stroke weight:"0.75pt", vertical justification:bottom align ¬ } end try try set myFooter to cell style "Final Row Cell" on error set myFooter to make cell style with properties ¬ {name:¬ "Final Row Cell", based on:myBasicCell ¬ , bottom edge stroke weight:¬ "0.75pt"} ¬ end try try set myLeftCol to cell style "First Column Cell" on error set myLeftCol to make cell style with properties ¬ {name:"First Column Cell", based on:myBasicCell, left inset:0} end try try set myLeftHeader to cell style "First Row, First Column Cell" on error set myLeftHeader to make cell style with properties ¬ {name:"First Row, First Column Cell", based on:myHeader, left inset:0} end try try set myLeftFooter to cell style "First Column Last Row Cell" on error set myLeftFooter to make cell style with properties ¬ {name:"First Column Last Row Cell", based on:myFooter, left inset:0} end try try set myTableStyle to table style "Horizon" on error set myTableStyle to make table style with properties {name:¬ "Horizon", body region cell style:¬ myBasicCell, header region cell style:¬ myHeader, footer region cell style:¬ myFooter, left column region cell style:myLeftCol} end try end tell set allTables to every table of every story of active document repeat with i from 1 to count of allTables set myTable to item i of allTables set table style of myTable to myTableStyle set properties of cells of myTable to ¬ {cell style:myBasicCell} set properties of cells of first column of myTable to ¬ {cell style:myLeftCol} set properties of cells of first row of myTable to ¬ {cell style:myHeader} set properties of cells of last row of myTable to ¬ {cell style:myFooter} set properties of first cell of first row of myTable to ¬ {cell style:myLeftHeader} set properties of first cell of last row of myTable to ¬ {cell style:myLeftFooter} clear cell style overrides clear table style overrides end repeat end tell
When it is to 'set style table of myTable to myTableStyle' it is said ' impossible to define style table id of the table to text frame id page id 220 190 of spread id 185 [the first table] document \"Untitled-1\" table style id 264 [style newly generated] document \"Untitled-1\" 224 " But I can't tell why. Can anyone help?
Table and cell styles are objects. When you want to apply, you must set the appropriate properties that are 'applied the style of table"and"cell style ". So: «the game applied style table myTable...» »
But in terms of results, you'll be probably happier using the commands ' apply the style of table cell / ' instead, which allows you to clear the replacements.
--
Shane Stanley [email protected]>
AppleScript Pro Sessions http://scriptingmatters.com/aspro>
-
I have a table with 21 lines. All the other ranks are used as the delimiter between the rows with content. These split lines have nothing in them, and their height is set to 1 in the property inspector. I'm assuming that these heights and widths are in pixels, however, these lines seem not to be 1px in design mode, or on a web page. They are more like 15px.
How can I make these lines 1px in height?
This site has code severely malformed.
I'm guessing he's hot-wired togather of various components and parts including the ChronoForm code?
On the heights of the cell, the code of a typical cell is:
The code between the
Tags (known as a non-breaking space) is a space character (press the SPACEBAR on the keyboard generates this code in the HTML code). Remove the code space for each
will cause your cells to collapse. You will need to open them with a GIF 1px high as suggested Murray prop. -
Hello
I want to create a table with 1 column and many programitically lines where I can be able to change the height of each row. Somehow, I'm not able to do the same in LV2011. CCan you let me know the reason, why I am not able to do?
Thanks in advance!
A method like this? The attachment is saved for 2011 sice, this version is not installed on this computer I can't see if there is a real problem with the methodology in 2011
-
Control ring during the cell table, but cell entry shows through
Hello world!
I have a control panel with a control of the ring which is placed above the active cell on MouseUp.
Unfortunately the input query (or the old value) of the cell is shown through the ring-control,.
that's not pretty.
screenshot:
I tried different ring-controls, but they all have the same behavior.
Try to find answers, but the guides to build the configuration of the table-ring that I found it.
does not mention a solution.
I hope that some of you have seen the same problem
and could point me in the right direction.
: cheers: thx for your time and
jwscs
PS. : If the sample code is required I'll gladly provide
OK, shortly after the display of my question, I had another idea
I disabled the front table and that did not work, because the rows and columns of the selected cell
cannot be determined,
But turning off right after the selection and then later reactivation, resolved at present.
I would be happy to know that any other method that you guys came.
: cheers:
-
cannot enlarge the pictures since the installation of Sierra
Since the installation of macOS Sierra yesterday I can't get photos in pictures to enlarge them by double-clicking on them.
Sorry, but we cannot see you if you have details - double click to enlarge photos, unless you have a problem and without any information we have no way to help
What happens? Did you just install OS X Sierra or wipe you your drive and install it or what? What else can you a total unknown who do not see you that could help them to help you?
LN
-
How to change the cell height in the apex 5, g->; o, j.-i.
Hi all
When I type a g in the inputfiled, I see o and when I type a j in the inputfield, I see that I have.
My settings:
Type: Text fieldWhen I save the data, the g and j are registered oke in the database.
How can I change the height of the cell in the apex 5?
Thanx.
Best regards
Vinay
Why would you use javascript?
@OP go to the definition of your page > css inline and copy this
input[type="text"] { height: 20px !important; }
Adjust the height of your taste.
There is a chance that you have tried to adjust the font size. This could be the reason why you can not see the parts of letters.
-
I'm puzzled. I created a table and I filled all the boxes except one. I can't understand why I can't access it. Any advice?
The jpg is messed up. Where the #41 should be had a red dot at the bottom right of the cell. I've highlighted the cell and delete everything. Then was able to type in the 41. I didn't know it until I did jump to the top of the page real tight this morning.
-
Cannot remove table or choose in this one
Hi all!
I have the Oracle 11.2.0.2 with immortal but very sick table database.
Result of the
select dbms_metadata.get_ddl('TABLE', 'TEST_LUNKOV') from dual
is
CREATE TABLE "MDM_MASTER"."TEST_LUNKOV" ( "LUN_ID" NUMBER, "LUN_GID" NUMBER, "LUN_HASH" NUMBER, "LUN_START_DATE" DATE, "LUN_END_DATE" DATE, "LUN_CREATE_DATE" DATE, "LUN_CREATE_USER" NUMBER, "LUN_CHANGE_DATE" DATE, "LUN_CHANGE_USER" NUMBER, "LUN_ROW_STATUS" CHAR(1 BYTE), "LUN_K" NUMBER(23,2), "LUN_H" NUMBER(23,0), "LUN_J" VARCHAR2(1 BYTE), "LUN_L" NUMBER(21,0) ) ENABLE ROW MOVEMENT;
As you can see only the simple datatypes, nothing exotic.
But when you try
drop table test_lunkov CASCADE CONSTRAINTS purge;
I got error
30739 00000 - "cannot remove a table that has sub-tables.
* Cause: The user tried to drop a table that has defined sub-tables
under him.
* Action: Drop all sous-tables them before attempting this operation.
On
select * from test_lunkov
I had
12986 00000 - "columns in partially suspended state. «Propose to ALTER TABLE DROP COLUMNS CONTINUE»
* Cause: An attempt was made to access a table with columns in partially
abandoned the State (that is, drop the column was interrupted).
* Action: Propose to ALTER TABLE DROP the MORE COLUMNS to fill the drop
operation of the column before accessing the table.
On
alter table test_lunkov drop columns continue;
I had
table modified TEST_LUNKOV
and nothing has changed - neither FALL nor SELECT still does not.
TKPROF attached
Problem solved.
DO NOT TRY! ONLY FOR INFORMATION PURPOSES.
shutdown immediate startup restrict update tab$ set flags=... where obj#=...; -- must be exactly 1 row updated, if not then rollback commit; shutdown abort startup drop table MDM_MASTER.TEST_LUNKOV;
This is table containing mat.view dropped.
-
How can I export table and cell styles to use in another InDesign document?
I've been looking for... and looking but cannot find out how to export table styles in InDesign CC. If there is an option of the control panel load table styles, it goes without saying that there should be an export. Any help would be appreciated, thanks.
Frank.GRG wrote:
If there is an option of the control panel load table styles, it goes without saying that there should be an export.
I understand your logic, but you think too much of it. Charge function Styles opposes the need for an export feature. When you call the function of load, you simply select the source document, then the individual styles that exist already in it. They need not be implemented beforehand.
-
Quick way to assign the IDs table header cells to data?
Acrobat X (10.1.9)
For the accessibility of tables with complex headers, is there a quick way to assign the ID of the header cells to data associated with them? I have not found a way faster than go to one cell at a time.
All tags already have an ID, this question is how quickly assign the ID of header cells to all data cells in a row or a column.
Better yet, is there a function or plugin that looks like to a table column and line and automatically assigns the headers for all data cells?
I used the Table Inspector in Acrobat and several years of the CommonLook plug-in version. Both allow you to set several properties for all the cells in a selection. And they act as if they fortunately put header IDs for multiple cells, but after clicking OK and watch the cell properties, TI is not set for any of them, and CL only sets it to the first cell that has been selected.
I prepare a PDF file of scientific reports for Section 508 compliance. Often, they are hundreds of pages long and got the results of large tables. Some clients insist on complex headers. Cell by cell is surprisingly long.
I am running the latest version of CommonLook and manages to assign very well identification tags. You can select multiple cells and assign them to a header. You can also select the same cells and assign them to another heading using "Append". This will add the new header, without deleting the header already assigned. In earlier versions Append has not worked for me. That's what you need, if you have complex tables for a long time. If you get the latest version and this isn't the case call Technical Support, as the plugin does not work correctly. The Touch Up reading order tool does not.
I sometimes create a white/hidden text for the header text that spans several columns and then create individual
to keep them, but I wouldn't rely on it for long tables or use it as my main method. It's a pretty quick solution in some cases - or if your author likes to let in line 1, column 1 white, you can create your own invisible header for the screen reader. But it is too difficult to verify, and not the best route to follow. Also the hidden text is considered a no-no by some as it is supposed to be a drop out / drop behind or mistake to layout.
Maybe you are looking for
-
Satellite 2410-603 - SD card reader not working not
My card SD Berlkin broken and I replaced it with a Netgear WG511 v2 which also does not work, now I wonder, is the map which is broken or the card reader? Any ideas would be great, thanks.
-
Satellite A660 - 13p (PSAW3E-01T00PPL) - Upper keys stopped working
I installed Windows 7 64-bit with all the drivers. Everything worked fine, but recently stopped working the high keys (eco, WiFi, volume, backlight). Allows only a permutation of Windows. Why? I reinstalled value-added 1.3.4 package but is not nothin
-
Windows XP Pro. Svchost use 100% system resources when starting. What is the purpose of svch.exe? RWM
-
Vista Business and Samba problem Dear all members,. We have a strange problem in Vista Business, three or four linux machine open with her samba but is not open that one machine, give access denied error that you have no right to open the message. Ot
-
Why did I lose network connection whenever I put my PC in mode 'Hibernate' or 'sleep '?
The problem defined above didn't happen when I used Norton360 (over a period of 3 years). But when I uninstalled Norton, then downloaded and installed Microsoft Essentials, suddenly everyonetime I put my Windows Vista PC to a low power state I lost m