Not covered by the course objectives for VCP5

Similar Questions

• Qosmio X 500-fault of screen not covered by the warranty?

  So as said elsewhere the X 500 series has a certain design/manufacturing fault that allows a "shadow" be visible on the entire length of the screen at the height of the taskbar (so don't not visible in windows, but jobs is full screen, like movies, just terrible).

  The attitude of Toshiba is that it is a "limitation of the technology" and not covered by the warranty (which I think is very poor on their part).

  My query is why?

  Given their other 18.4 "models (P500 for example) doesn't seem to have this obvious anomaly, and nor other brands models 18". If it was a limitation of the technology like Toshiba said so surely other models/brands that X 500 would have this anomaly?

  Personally, I think the excuse of "limitation of technology" is just a COP on part Toshibas who do not want to solve the problem on EACH item, I'm sure that the next model (x 600? whatever) will miraculously not the issue and those of us who have decided on Toshiba will continue to say "too bad".

  I searched the net looking for x 500 no descriptions of this "limitation" as we should expect a "limitation of technology" to be as widely reported as their other favorite, the dead pixel but found nothing. It seems this limitation of effects incredibly alone technology Toshiba X 500? Toshiba must think we're gullible.

  My fault however maybe done research, can any that shed light on why only the X 500 has such a terrible mistake and no other models?

  I don't know if this is the right place for these issues.
  It is user forum and I do not think that any of us has access to s secrets Toshiba ;) to see what type of screens are used on the Qosmio X 500.

  I don't know if Qosmio x 500 has new generation screens, but I don't know that Toshiba uses better technology for this model of laptop high-end.
  In the past all Qosmio notebooks are best of the best in all aspects, materials, software and many other software programs.

  Just, I hope not, I am sure, that Toshiba will continue this philosophy for Qosmio range and seems best proof new Qosmio F60.
  I like it a lot but leys see how much it will cost.

  Good bye

• HP pavallion 15e019tx: laptop computer charger not covered by the warranty of 3 years?

  Mr President
  I pavallion computer 15e019tx hp laptop that I bought in September 2013 with 3 years on-site warranty for equipment. Now my chager does not work. When I contact support team, they simply said that the battery and charger are not in warranty!
  If we are given the charger with the laptop at the time of purchase and there is no separate additional charges for the adapter, then why we are asked to pay for the replacement, if we are under warranty!

  This means buying a laptop for around 40 k and then pay for coverage and then your charger is still not covered under the present... when it will stop working, you are to pay about 2 k more...

  one more thing

  the address for the authorized service centers and their contact details must be updated on dialy basis... you have no idea how much we - customers have to suffer...

  Sorry, but I'm really angry... to get to talk to a representtive through online chat, it took me an hour to connect... and then he said that you are connected to the usa... gave me the link for the number of teams and contact with Indian support (he was really friendly, which helped me). I waited two hours to connect to the chat Indian tech support chat online and then disconnected...

  What should I do now? buy a new one and tear up the papers and that Bill saying "3 years on-site warranty..."

  or wait for a miracle to happen...

  Hello

  Not normally. All sellers are doing the same.

  Kind regards.

• Default setting screen IdeaPad s 100 14IBR (CAT in is not covered by the warranty?)

  I just purchased this ideapad yesterday, lol, yesterday

  What happened earlier in the morning when I tried to open the laptop

  It tends to lose

  I had a cat of support and the person says that it is not covered by the warranty.

  I did not open the screen myself, it happens when I flip the cover in the usual way a normal person would do when you want to watch on the screen (unless you're not)

  I'm going to visit a service center in the morning, I just want to raise this issue in this forum.

  now any illumination that is why it is a joke? This is not due to misuse or whatever, is definitely a fault, the plant problem rather than my own problem.

  This problem is solved.

  The service center does not charge me anything to replace it.

  It took approximately 3 business days, total 6 days including weekends.

• My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal?

  Hello

  My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal? I can't see it anywhere, should I worry?

  Some laptops, like my Envy 17-3002ea loan, have the certificate of authenticity Windows hidden in the compartment where the hard drive and the battery are.  First try.

  Other portable latest and which may include yours, have the Windows license key encrypted in the BIOS.  There is a thread on the Microsoft communities that verifies that. The thread is worth reading.

• Service is not distributed in the country / region for your account.

  I need to buy several applications for my camera Sony Alpha 7, but I get the following message appears when you try to do:

  Disconnected because the service is not distributed in the country / region for your account.

  How is it that I am authorized to purchase the camera but not the camera applications? I am based in Czech Republic. It's strange how customer service.

  Is there a way around? I need applications for my professional work.

  Thank you

  Michal

  Hi zarzi, I recommend you to visit our global website of Sony to find local stores and dealers in your area: http://www.sony.net/SonyInfo/Support/. I hope this helps! Thank you, Charlie

• Win7x64 with adapter DWA-160, "Windows could not automatically bind the IP protocol for the network card stack."

  As the title suggests, I am running Windows 7 family, 64 bit. This is a new installation, a few days ago and I have not installed anything on, or changed the settings.

  I installed a DWA-160 D-link Wireless adapter n with the current drivers, fix (before you ask to confirm, they come from Web site of D - link. I used initially the disk included in the box, however, this has generated the same question that I'll explain, so I uninstalled this software and has continued to use the Windows program to connect to the wireless network.

  I can connect to the network, of course; However, I get the message "Windows could not automatically bind the Protocol IP on the network card stack" when connecting each time.

  After searching for an answer, I tried to turn on the WLAN auto configuration service, however, it is enabled by default. If this isn't any help.

  Tried the netsh winsock / netsh int ip / netsh int ipv4 / netsh int ipv6 reset and restarted after each, no change, if this isn't any help.

  Made sure the problem wasn't with the wireless router, and it isn't because I can connect with my laptop.

  Tried to plug in the USB stick on another computer yet. I don't want to plug into my laptop just to test that possibility. So. Yes.

  I also don't know much about all the inner workings of one of these things, so it would be rad If everything was in one step by step. Thanks in advance.

  Try to run This Fix - It.

• manufacturing not covered by the warranty defect

  I don't understand this. I sent my computer under warranty to get his slab replaced IPS because I have problems with points of light and ghosts. I thought it would be a fairly easy procedure, but to my surprise, I was told that it was not covered by warranty. It told me that it was not considered as a common phenomenon in their system, and they can't prove it, has been a problem in the manufacturing sector.

  My question is why did something that is clearly a manufacturing defect not covered by warranty?

  THIS ISN'T AN ISOLATED INCIDENT

  Please do the right thing, Lenovo and authorize a repair of my machine.

  IBM problem number: A04DDWH

  I feel bad for all those involved in the present. The two reps that I spoke used the same straw man argument. It is clear that the Department year guys are forced to put me in a straw man. It's a very pitiful practice.

  I wouldn't count on Lenovo help me through the forums more. However, one who might be interested, I've included my BBB complaint letter.

  xteaphn wrote:

  I sent my Lenovo computer twice about the failures of the LCD of my ThinkPad X 220 - (4286 model).

  The default is bright spots that appear on the screen. It is a problem I've had since the first day. But I own a computer and this one is it. As an EECS major that I'm glued to my computer 83% of my awake time, (which is not an exaggeration. It's a real calculation is more than 1.5 years! ) and cannot afford not to have my work horse.

  None of this matters anyway. What is important is if it is a defect or if there is damage to customer.

  Both times, I gives me a straw man argument.

  REP: we can confirm that the problem is present in your unit. We have not found any reason why there is a problem.

  Me: so the part is defective right?

  REP: the panels do not form these types of problems on their own.

  Me: but what happens if there is a manufacturing defect?

  REP: the panels do not form these types of problems on their own.

  Me: but they can; things may be defective.

  REP: you can't prove that.

  This is ridiculous. It's like some kind of joke. I find it ridiculous (I really find it funny). If I knew that Lenovo would fuck me more like this I would have bought something else.

  This isn't an isolated either incident. There is a long thread on the Lenovo forums on this problem. It elaborates on the exact problems I'm having. How Lenovo could be so obtuse on the subject is madness.

  Now I'm stuck with it. In addition, to add insult to injury, I paid for an extended warranty, thinking that this would be covered. I am Lenovo b * ch it's sad.

• User disconnects not properly causing the locked objects?

  I often see a warning of the locked object. Is it possible that users who screens and do not close the logoff may leave the locked object? For example, closure of Regional service with a contour open instead of closing the outline, then using file-> exit to Regional service.

  Thank you

  FA

  You are right.  I find items left in a locked state caused by several actions.

  (1) EAS closing although an item open/locked

  (2) "timing" EAS outside on a user, even if an object is opened/locked

  (3) automation that locks an object (say a build rule dim), but ends, leaving the locked object.

  To help relieve this

  (1) tell users to 'See' objects instead of "Edit" them if the user does not change.

  2) users learn the importance of good objects immediately close once they are made edition.

  3) users learn the importance of the economy and the closing of work in progress when they switch to another task in the middle of editing the objects...

• Teddy bear information is not available from the vswitch object

  I am using Perl SDK to extract the informtion Teddy form a vswich object, but the bear is not intilized when I assigned the vswitch object.

  My $netSys = Vim::get_view (mo_ref = & gt; $moref - & gt configManager - & gt; networkSystem);

  My $vswitches = $netSys - & gt; networkInfo - & gt; vswitch;

  {foreach (@$vswitches)}

  My $pNics = $_ - & gt; Teddy bear;

  My $Switch_name = $_ - & gt; name;

  My $portgroup = $_ - & gt; PortGroup;

  Print "$pNics";

  }

  no idea why this is happening?

  Thank you!

  Try this script: getdvSwitchInfo.pl

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• new emails to get function does not work. The only way for me to get into the Inbox is to move the cursor on the top line through all the mail back to the Inbox

  It is difficult for me to return to the tab 'Inbox '. Now, I have to scroll to the left through the tabs until I get out of the Inbox to access all my emails.

  The general 'get new messages' does not result or response when I click it. Or not clicking my name specific email for work messages.

  Thank your for your help.

  TwoArrows

  I suggest to you that start close tabs message after reading them.
  Now right-click on a tab and choose close other tabs.

• IPhone 4 ios 7 can not get on the family sharing for itunes

  Hi, my son got a new second hand phone. try to get him on the family sharing so he can listen to the music, but whenever he's trying to do a song, his view as a purchase. his name is included, but it has version 7. We have updated the phone on itunes and its not updated it to ios8 one had success with this?

  Thank you

  Hello evechoccy!

  Thanks for reaching out on the share of the family option does not arise with the iPhone of your son 4.

  The reason for this is the iPhone 4 can only go to iOS 7 and sharing of the family did not become an option until iOS 8 and later versions. You can see the family sharing requirements here: family shares - Apple Support

  Kind regards.

• Compatible options is not available on the Web site for Portege M700

  Hello

  For the last 3 days no compatible option appear on the Web site for the M700. I would like to buy one, but need to order etc. spare battery.

  Tip: I would like to spend the money.

  If someone Toshiba could explain why the compatible options are not displayed, I would be very grateful.

  Thank you
  Mark

  Hello

  Unfortunately I'm not toshiba so I can't give you an answer "TOSHIBA": D ".

  But after surfing the website of toshiba Europe, I couldn t find anything wrong. All options are available and I Don t know where is the problem. Maybe there was just a few changes to the site within the last 3 days...

  Welcome them

• Laptop does not, shows "press the ESC key for startup menu?

  Hello
  
  I have a hp laptop Pavilion g6 (product QE05UA #ABA, model: g6-1c35dx)
  . For a while his summer of problems, it was slow, showing the virus, and now it won't start.
  
  I left it on the mode 'sleep' last night, once I opened it today, it has been disabled. I thought that he lost battery which usually doesn't happen, but I turned it on and it shows a flashing screen that comes on and then turns black, again and again. the flashing screen shows "press ESC key for startup menu.
  
  In addition, the caps lock key will blink once when that lights up the screen.
  When I press "esc" it says this:
  
  The F1 system information
  The F2 System Diagnostics
  F9 boot device options
  Bios F10 Setup
  F11 system recovery
  Enter - continue starting
  
  I tried all of them, including some tests in "BIOS".
  
  I don't know much about computers, and it is one that I need so help is greatly appreciated.

  Hello @Mike1994r ,

  Thank you for your reply,

  I see that you were able to run the tests and make a recovery but the problem persists, I suspect a hardware problem.  As you were unable to locate the problem of testing, I suggest contacting HP support for assistance.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• My mother has forgotten her password. Reset does not work and the e-mail for it no longer works.

  My mothers account is * address email is removed from the privacy *. She cannto remember his password. A standard to reset request does not work as the old email not available more

  Hi MorganSilver,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will support what ask you