Not found dynamic link library

Similar Questions

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I_RpcBindingIsServerLocal is not found in the RPCRT4.dll dynamic link library

  Windows 2003 64-bit, the server crashed after installation of windows update and keep restarting with blue screen stating 'Procedure entry point not found I_RpcBindingIsServerLocal in the RPCRT4.dll dynamic link library' there is no way to access Windows in safe mode or in any other way tried to use last know good configuration, safe mode. The only way is to access Windows Recovery Console in which we tried to repair and run the chkdisk but unfror. with no luck.

  How can we overcome this problem without upgrading them to 2008!

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.

• 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  ORIGINAL TITLE: How can I fix this please?

  I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

  'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  Thank you for your help.

  The other post:

  We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

  In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

  When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

  In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

  Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

  Additional post:

  Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

  Here are a couple:
  1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

  2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

  I have an old computer. Compaq Windows XP - Home Edition, 5.1.

  A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

  Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

  * Original title: do not get the automatic updates.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Tom Ferguson

• hpqtra08.exe - Entry Point not found error. The Get procedure entry point Module F < [not found in KERNEL32.dll dynamic link library.

  Original title: hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  (This keeps popping up on my screen and I don't know how to get rid of it. Can you please tell me what to do?)

  Hello

  ·         When exactly do you get this error message?

  ·         Did you of recent changes to the computer before this problem?

  ·         You are able to boot to the desktop?

  You can follow these suggestions:

  Method 1:

  If the previous step fails, follow these steps:

  a. restart the computer in safe mode and disable the HP service and check if the problem occurs. Follow the steps described in the following steps:

  b. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  c. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  d. Click Start and run, type msconfig, and then click OK.

  e. the system dialog Configuration utility appears.

  f. click on the Services tab.

  g. Click to select the check box Services HP Digital Imaging Monitor or hpqtra08.exe.

  h. click OK.

  i. When you are prompted, click on restart to restart the computer.

  j. after reboot check if the problem occurs.

  Method 2:

  If the C:\Program Files, download and run the Microsoft of the link Security Scanner to make sure that your computer is not infected with the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• SKYPE: "the procedure entry point not found NtalpcSendWaitReceivePort in the dynamic link library ntdll.dll."

  I just updated my version of Skype at: 5.10.0.14, but every time he tries to load at startup, I get this error message: "the procedure entry point"NtalpcSendWaitReceivePort not found in the dynamic link library ntdll.dll.

  When I click ok, it loads. I have re-uploaded twice, but it's always the same!

  Please, can anyone help?

  Hello

  Method 1:
  You can uninstall Skype by using the Fixit, then reinstall.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2:
  Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Alternatively, you can display the query in the Skype forum to get help.
  Skype - Forums
  http://Forum.Skype.com/

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• procedure entry point SetD | DirectoryW is not found in the KERNEL32.dll dynamic link library

  original title: procedure entry point SetD | DirectoryW

  is not found in the KERNEL32.dll dynamic link library

  Hello mxlpick,

  When you receive this error message?  How long have you encountered this message?  Here is a link that I hope will help solve this problem.  Please let us know status.

  Microsoft KB:

  http://support.Microsoft.com/kb/142606

  Thank you

• System error "the procedure entry point _SetAsyncTraceParams at (@)" 16 is not found in the library of dynamic links ATRACE. "." DLL.

  Original title: no access to system restore

  After a massive search, I can't solve this problem! Please indicate why this is happening and how to solve it.  Thank you for your support.

  This is the error message pop up that I got trying to activiate (Rstrui.exe) system restore "the procedure entry point _SetAsyncTraceParams at (@) 16 be found in ATRACE dynamic link library. DLL. notice the @ in support should replace 'at' since the seizure of this character created a link to MFL and was confusing to read!

  Hi intelegend,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that scan you SFC on the computer that would be a corrupt system file search.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the steps above do not then refer to the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• "... SHRegGetValueW not found in the library of dynamic links SHLWAPI.dll. »

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  First of all, you can not install SP3, except if you have SP2 installed successfully. Since you have SP1a, you need install SP2, then try to install the SP3 and IE8.

  In addition, this can happen if your SP service pack is damaged/corrupted.

  You receive an "Explorer.EXE - Entry Point not found - the procedure entry point SHCreateThreadRef is not found in the library of dynamic links Shlwapi.dll" error message after you install the MS04-038 security update
  http://support.Microsoft.com/kb/888162

  Installation of Windows Internet Explorer 8 on a Windows XP-based or a Windows Server 2003 computer returns error: "SHRegGetValueW procedure entry point is not found in the library DLL SHLWAPI.dll."
  http://support.Microsoft.com/kb/972264

  NASS - http://www.nasstec.co.uk

• 325 ordinal is not found in the AHDOCVW.dll dynamic link library

  I have a school program that doesn't work with IE8. He suggested in school support uninstall IE8, I did. Now, I get an error 'The Ordinal 325' not found in SHDOCVW.dll dynamic link library message every time I try to do anything. Boy did I mess up. Is it possible to reinstall IE8 or does anyone have any other suggestions as to what I should try?

  Hello.
  This discussion suggests running regsvr32 /i shdocvw.dll
  http://social.answers.Microsoft.com/forums/fi-fi/InternetExplorer/thread/1a43d725-AD6C-4713-a723-daddb11189bf
  Here is another discussion on this issue: http://www.annoyances.org/exec/forum/winxp/t1101578221

  To be honest though, you might want to try to re - install IE8 first. It back to the last known good state.

• the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

   I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

  Hello Elle1234,

  Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this review helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)