Not including use of repository space

Similar Questions

• Windows 7 Installer error "Setup could not use the existing system partition because it does not contain the required free space.

  Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space.  All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation.  Tried to reformat a partition empty all reinstall Xp sp3 without result.  What can I do?

  Remove the data cable of all drives except the drive that you want to install Windows 7 on.

  Remove all external devices.

  Delete all partitions on the disk leave all of the disc as "unallocated".

  Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.

  Also: http://social.technet.microsoft.com/Forums/nb-NO/w7itproinstall/thread/1b1adc74-3d94-4897-a3c1-7aabde44fe4b

  JS
  http://www.PAGESTART.com

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.

• ODI-17769: OdiRef: internal ID of the SnpSession of the IObjects should not be used when the repository is in mode 12 c

  Hi people,

  I created a variable with refreshing: select '< % = odiRef.getPrevStepLog ("SESS_NO") % >' FROM DUAL

  The error Code is:

  ODI-17769: OdiRef: ID internal 261 of the IObjects SnpSession should not be used when the repository is in mode 12 c.

  Here is a solution for getLoadPlanInstance offered:

  Rittman Mead Consulting"Data Integration tips: ODI 12 c - Substitution API GUID

  based on a "non-written response" by David Allan of Oracle data integration team

  But what of on SESS_NO? Is there a "written response" too?

  Thanx

  Frank

  Hello

  Something like below:

  For example, SESS_NO = "<%=odiRef.getPrevStepLog("SESS_NO")%>". »

  try to replace it by GLOBAL_ID = "<%=odiRef.getPrevStepLog("SESS_GUID")%>." »

  If you use KMs delivered with ODI, you must replace them with their corresponding versions of 12 c.

  If you have your own custom KMs, you must either adjust your KMs to use new odiRef methods that return the GUID of the object.

  or re - upgrade their repositories to use 11 g compatibility mode.

  Thank you

  ASP.

  Please close the message it useful or response.

• I have a Mac Book Pro, which does not include a CD slot and I bought the Suite Adobe 6 CD. Download the program from the Web site using my serial number?

  I have a Mac Book Pro, which does not include a CD slot and I bought the Suite Adobe 6 CD. Download the program from the Web site using my serial number?

  Hi Haley,

  Please download Creative Suite 6 applications

  Kind regards

  Sheena

• ERROR: ' we found your application uses iOS identifier for advertising but does not include the functional ad.

  I just create my new Single Edition App, but Apple rejected my application because:

  "We found your application uses iOS identifier for advertising but does not include.

  feature ad. This is not consistent with the terms of iOS Developer

  "License program, as required by the App Store Review Guidelines."

  https://iTunesConnect.Apple.com/WebObjects/iTunesConnect.woa/Wo/10.0.0.7.3.0.9.3.3.1.0.13. 3.1.1.11.3.1.0.6.1.1

  What does that mean? What should I do? I already created another unique edition correctly...

  Rebuild your simple editing application and then try again to Apple. We have released a fix for this Friday.

  Neil

• EPSON printers E - Web Print is not included in your "approved modules" you will allow me to keep/use it anyway in 41 or should I switch to a different browser?

  Your new "signed apps" will not allow use of unsigned after the 41 version. This won't allow 'E - Web Print' Epson app right now, and the description says you will be disable rather than allow me to assume the risk. I like Firefox, but won't trash my new Epson printer - so will be forced to use another browser. Will allow users to assume the risk for applications not signed for a longer period, so that these exclusions do not occur for those willing to take the risks?

  The simplest solution would be to Epson to present this extension for Mozilla for the signature. Mozilla plans to signature, without obligation to host it to AMO extensions self-hosted.

  But of course, they do not is that they do not support this request more. Support FAQ selected in Epson

  Exactly what he controls only the extension?
  What would not work if the user was not able to use this extension?
  Regarding printing email - Firefox is not yet "doing email." And print from a webmail portal would not happen as it does on a Web page.

  http://answers.informer.com/variations/496310/what-is-Epson-e-web-print/
  "On Firefox and IE my Epson E - Web Print extension is presented as an optional toolbar that allows me to clip and print. Epson says it's compatible with Chrome, however, no matter what I try I can't it appears. »

  This can be done using the print preview when you use an extension like this:
  https://addons.Mozilla.org/en-us/Firefox/addon/print-edit/

• Which (if any) cloud services are NOT included in a perpetual license for Acrobat DC

  I'm having a hard time nailing in what services cloud are not included in the perpetual license for Acrobat DC. As far as I know, Adobe is a web page that directly compares the features of a perpetual license of Acrobat DC (Standard or Pro) with the corresponding version of the subscription.

  Since few can have the patience to read until the end of this post, I thought I would cut to the chase with my question (s):

  • Is what cloud services are not included in the license for Acrobat DC on the adobe site? If so, could you please give a link?
  • Alteratively, if you know the specific online features that are not included with the perpetual license, I would like to know what people are.

  This is substantially incomplete or ambiguous information that I could find.

  The Acrobat FAQ on purchasing Acrobat DC says "you can also buy Acrobat Pro DC or Acrobat Standard DC as a one-time purchase. It includes desktop software and allows you to work with Free Adobe Document Cloud services"(emphasis added).  I understand this means that there is no free Document Cloud Services that are not available to users who have purchased one license.

  Web page: Plans and prices: compare plans | Adobe Acrobat DC compares Standard and Pro, and within each toggles between subscription and license.  Thus, for features, it is possible to compare standard subscription with pro license (for example).

  Also, since Pro subscription has all the features listed in the table, it is easy (by activating / deactivating the license subscription) dismiss only two characteristics: they are:

  • Send and track documents online
  • Add or edit text in a PDF document on your iPad
  • Reorder, delete or rotate PDF pages on your iOS or Android tablet
  • Collecting electronic signatures of others and track responses in real time

  Most of the functions listed in the section "sign and collect" seems to be available in the office and subscription services, but it is possible (probable) that these features are available on the desktop (and not on the web) for those who do not subscribe.

  The FAQ of Acrobat (which can I with Adobe Document Cloud services when working in Acrobat DC?) implies that the subscriptions are needed "to complete essential tasks of PDF of anywhere, including your web browser and Acrobat DC mobile app:" he mentions the following. ' "

  • Convert files PDF, documents, and images
  • Combine multiple files into a single PDF file (desktop and web only)
  • Transform PDF files into Microsoft Word, Excel, PowerPoint, or RTF files editable
  • Use your mobile to take a photo of a paper document and convert it to PDF format
  • Send documents for signature and then to track, manage and store online
  • Send, track and confirm delivery of documents by electronic means rather than use faxes or night services (tracking is not available on mobile)
  • Edit PDF files from your iPad (Acrobat cc Pro only)
  • Organize the pages to your iOS or Android (Acrobat Pro cc only) device
  • Store and access files online with 20 GB of storage.

  The answer to this FAQ States expressly that these online features are not available to license office buyers.

  Thanks for your help.

  Hi chicagolaw15,

  You can compare between subscription & perpetual function using this link Plans and price | Adobe Acrobat DC.

  With a perpetual license, you will receive the document cloud services, you will only be able to use the free space of the cloud of the 5 GB document.

  Kind regards

  Nicos

• List of Figures: How to not include the figure discription?

  Hi, I'm writing my thesis for a Ph.d. student, and I have a very specific requirement for figures and Figure legends and tries to use the automated features of InDesign to help me. I know it must be possible, I don't know how. Here's the situation:

  I need to have a figure which is subtitled as follows: 'Figure 1.1 products chemicals used. This figure illustrates the structures of chemicals...» In which 'Figure 1.1' is the number of digits, "chemicals" are the title of the figure, and the rest of the text is the real legend. I need them to be, as shown, in the same paragraph (IE not on separate lines). I have about 100 numbers. I learned how to set a list and then set legend style to use the list so that the figures are numbered automatically. Here's the question:

  Then I need to generate a list of Figures (similar to a table of contents) which lists each figure in the following format:

  Chapter 1. Introduction

  Figure 1.1 chemicals used... 1

  Figure 1.2 made molecules... 2

  In which the number and title of the Figure are reported in the table of contents, but the figure legend text is not. I was able to understand a little about how to set up the table of contents report on more or less in the format I need to (although I still have to solve what I mess up), but the real problem is that when I automatically generate the table of contents, it includes the text of the entire legend. It is because in the legend of the origin, the text and the title and number are all one paragraph, so when I fill out the table of contents based on a definition of the paragraph, it fills with the whole paragraph.

  Two things I can think that it can solve are if I can) 1 defines two different paragraph styles in the same paragraph or 2) fill a table of contents based on a character instead of a paragraph style style (then I could define just the number and title as a certain style and populate the list with it.)

  Anyone out there have the solution for me? I clearly have a familiarity with the program (I went through all the class in a book in the last days), but am no expert. Your advice and assistance will be greatly appreciated!

  LunaKT wrote:

  "* If there are too many titles figure for the approach described above, you can insert a nested here at beginning and end of each caption Style end character (example: this figure shows blah)." These characters of width zero invisible are preserved in a generated table of contents. Modify paragraphs in the table of contents entry to include a nested style is none until 1 end nested here Style and a character style placeholder Style nested here until 1. The character style must not have any visible properties.  Create a condition. Set up the table of contents, then select include a full paragraph.  Once the table of contents are generated, use find/replace to find the placeholder style character and replace it with the State. Then, hide the condition. "

  There are too many titles (some of them, a lot of long words) figure for the first approach.

  Maybe I didn't explain it clearly enough. The way I understand you description, your auto numbered paragraphs start with a figure title, a short sentence as chemicals used, created molecules, etc.. This title is followed by a longer text, that you seem to call the legend text.  I think you want to extract the end of automatic and numbering introductory paragraph for the TOC. You found that InDesign cannot separate the parts of a paragraph to the TOC process. You also found that InDesign cannot easily put two paragraphs on the same line, so your disposal presents a dilemma.

  There were descriptions of how to put the two paragraphs on the same line on these forums, so try searching on Google for "InDesign two paragraphs on the same line," 'Zero InDesign space before paragraphs' "InDesign negative space before paragraphs," and other similar expressions, without quotes. (Google searches find topics in these forums and other resources outside of Adobe).

  The method of image inline was mentioned in another post on this thread.

  as for the second, I'm still pretty new to this program I think I follow your logic, but will have to play a little to make it work. As a solution, it seems viable, but I am really surprised that InDesign doesn't have a feature for this built in - I think that this kind of situation would be pretty common.

  FrameMaker has the opportunity to present two or more independent paragraphs on the same line. The so-called "break-in" paragraphs they are essentially the paragraphs with a "carriage return" but no line breaks. You can post a formal request to incorporate it into a future version of InDesign to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.

  If you have the time, do you think you can only simplify/clarify this explanation a bit more? I follow your logic, but am not following how do a space character reserved up to 1 nested Style to end of style here. (Literally, I can't know which menu to open and what to do in order to complete this statement)

  Thanks for your thoughts.

  "Style of placeholder characters" may be a term that is too vague. I wanted to say that you need a character style that is not what anyone other than to identify the text to which you want to apply a condition, so that you can hide text in the table of contents extracted, by hiding the condition. The condition does not change a text property, although you might want to temporarily give a different text like a color property or "BOLD" when you set the nested style, so you can immediately see the result. After you've proven configuration, remove the property changed the character style.

  Nested styles are created in the balls and Nested styles from the paragraph Styles panel Panel. Read more about nested InDesign using paragraph styles. You can simplify the insertion of markers end nested Style here using the quick apply feature. Him to the position of the text insertion point where you want to insert the marker, press Cmd + enter on Mac or Ctrl + enter on Windows, to open the quick apply dialog box. Type "here" without the quotes in the text entry box to view and select the command "Nested at the end Style here". Press ENTER to insert the marker and close the dialog box. Move the cursor to the next position, press Cmd / Ctrl + Enter again. Apply quick should redisplay and highlight the last command, "End Nested Style here." Press ENTER. Etc. Another approach is to select and copy the marker, then paste it where you need it. If you do not see the marker, turn on Type > show hidden characters.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Attachments in the original message are not included when I send the message

  While transmitting a message with attachments, the attachment is not included in the message.

  This is common with mail generated in Microsoft Outlook. Outlook does not encode attachments properly so they do not move. Use forward as attachment for the mail instead of to the front to include attachments.

• Mozilla, your last update does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Your last update of firefox, Mozilla does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Firefox never includes the intermediate certificates.
  It is the responsibility of a server to include all the intermediate certificate required to make it possible to build a certificate chain that ends with a trusted root certificate embedded.

  Note that Firefox automatically records the intermediate certificates that servers send in certificates for future use Manager (they appear labelled as 'Software security device' in the References tab).
  If a server does not send a complete certificate chain then you get an untrusted error when Firefox has stored missing intermediate certificates to visit a server in the past that a send it, but you get an untrusted error if this intermediate certificate is not yet registered.

• Display on a monitor is not fully used. What should do?

  I recently bought a Mac mini (end of 2014)

  OS X 10.11.5 (15F34)

  I use a Samsung 19 inch monitor via mini display port to VGA.

  But the screen is not fully used (black on both right and left of the picture)

  When I go to about this mac > display, this is show 13.9 inch (800 x 600). I changed the resolution of 1280 x 1024 through the display preferences. But it is still not working and this mac > display, shows always 13.9 inch (800 x 600). The image is blurred.

  Help, please...

  You may need to buy a graphics card in order to use a different port on the computer.

  Check the display to see if there are other options of the signal may use another cable.

  A more recent model computer should be able to use a modern with Thunderbolt screen

  connections; Some cables with ends adapter for use with older screens may work

  If the display can be used in this way. Not all of the same works if an adapter may adapt to the form.

  • Apple Mini DisplayPort adapter: Frequently asked questions (FAQ) - Apple Support

  While I have two Mac Mini computers, one is a late 2005 and the other end 2012;

  both can use an HDMI adapter for a 19 inch Samsung works for these at full resolution.

  Mini-Display port to HDMI it works; If not, using lightning.

  One of my screens use one of these cards:

  Apple Mini DisplayPort to DVI adapter

  Some display models require pilots who would be obscure and not included with

  OS X; I have another Samsung that turns, it is supported but you must use a third-

  part control panel app in the old OS X 10.5.8 and OS X 10.9.5. The X OS

  controls brightness and resolution are limited without it.

  {Since the new Mac Mini is more beautiful with a movie theater 20 inch aluminum, it's what}

  He has; the older Mini OK with a Samsung 19 inch (square), and it uses

  control software for OS X settings cannot. Most recent can use Thunderbolt.}

  Not sure if your screen is oldest of those who may need a separate control software.

  There is a updated firmware for Mini Display Port to VGA (himself):

  On the Mini DisplayPort to VGA adapter firmware update - Apple Support

  If you see not all possible display resolutions in displays preferences

  It may be due to the absence of a favorite graphics card. Or a longer display limit.

  • The display of all the possible resolutions for viewing under Mac OS X:

  http://osxdaily.com/2015/08/27/show-all-display-resolutions-external-screen-Mac/

  • About the Mini DisplayPort to HDMI - Apple Support adapters

  You may need the machine support site to test technical research view if you

  not a page printed with line info specifications said. Several different adapters

  are available; You can even use a digital TV (limits) as screen.

  • Learn more about Troubleshooting display issues.
  • Learn what adapters are compatible with the specific Apple computers.
  • Learn more on Thunderbolt and displays ports.

  The technology of the adapter and display need to better match those of the Mini.

  Older tech display should be supported within the limits. Connections and drivers.

  PS: See if the update of the firmware of the adapter you have, will allow him to work.

  If the adapter is an Apple product, it would be able to accept the firmware.

  Good luck!

  edited 3 times

• Why favorites are not included as in the Finder, when I try to open and send a file with safari?

  Why favorites are not included as in the Finder, when I try to open and send a file with safari?

  Here is safari (cmd + O)

  

  and that's with the Finder:

  

  before macOSX 10.11.4 it was exactly the sames windows...

  How can I change on Safari and Chrome?

  Thank you very much and excuse me if my English is not very good.

  If you go to Finder > Preferences > sidebar , you will see there is no option for Safari > bookmarks, but you can send a link from Safari.

  In your Safari menu bar, click file > share > Email.

  For Chrome, you may need to use a Goole Chrome for sharing.

• Online number does not include minutes unlimited countries?

  I'm used to be a subscriber to an online number that includes unlimited minutes in this country. This year, when I tried to renew, it does not include the minutes! I didn't know until I noticed that my credit on my account is down! Now, I had to go back and subscribe the minutes of this country and discovered that I have 50% discount if I get an online number. Is it possible to refund 50% of the number online that I have previously subscribed? Can someone help me?

  Hello
  You can contact Skype Customer Service and explain that you want to have a discount for the number.
  How it can be done at all? They will issue a refund for your number, then number is of course removed from your account (but you reserved for 90 days) and then you go through the flow of payment again.
  I can't promise they'll refund your number, but it's the only option available

  If my answer helped solve your problem, mark it as a Solution to help others.
  Thank you!
  
  Please send messages private by request only.

• I tried to buy my book - DEFAULT TEXT - your book seems to have default text that has not been modified. Printed books will not include this text. This means all my text will not print?

  Using OSX El captain on a desktop iMac. iPhoto 9.6.1

  I tried to buy my book - this box appears - TEXT by DEFAULT - your book seems to have default text that has not been modified. Printed books will not include this text. Does this mean that all my text will not print?

  I've been twice now and change the text of Bradley Hand to the Blackboard to Helvetica Neue - which seemed to be the default. Message remains displayed. I don't know what else to do. This is my third book over the years, but the first with this problem. Can someone advise please?

  Thank you Davina

  It is not a problem of fonts. It is the problem of the sample text entered by the models.

  The error message means that there is a text field in your book which is still on show at the text included by the model, and you will need to replace this text with your text. This textfield might be hidden behind a picture.

  If you create a preview of the book, such default text is omitted. Have you compared the preview of what you see in iPhoto? Text that shows in iPhoto, but not in the preview will be such default text.

  For example, the section 'Topic of this book' on the flap back in some themes is a default text that should be replaced by your own legend: