ERROR: ' we found your application uses iOS identifier for advertising but does not include the functional ad.

Similar Questions

• ERROR. We found that your application uses iOS identifier for advertising but does not include the ad feature.

  Hello

  We have introduced an application using DPS Enterprise and had this error. I saw on the forum that it came early this year and a fix has been released, so no reason for this again? We use the latest versions.

  Graham

  Apple sometimes incorrectly reports apps with this error on review. There is no identifier advertising in use at the DPS. The dismissal of the appeal and tell them the app includes iOS identifier for advertising and ask them to check again.

  Neil

• Rejected app - iOS identifier for advertising?

  Can someone decipher exactly what that means? Where in the world would I enabled IOS identifier for advertising in the building of this app and how the hell do I disable it?

  PLA 3.3.12

  
  

  We found your application uses iOS identifier for advertising but does not include the ad feature. This is not consistent with the terms of the iOS developer program license agreement, as required by the App Store Review Guidelines.

  We have released a fix for this Friday. Rebuild your application in the App Builder and then try again.

  Neil

• Mozilla, your last update does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Your last update of firefox, Mozilla does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Firefox never includes the intermediate certificates.
  It is the responsibility of a server to include all the intermediate certificate required to make it possible to build a certificate chain that ends with a trusted root certificate embedded.

  Note that Firefox automatically records the intermediate certificates that servers send in certificates for future use Manager (they appear labelled as 'Software security device' in the References tab).
  If a server does not send a complete certificate chain then you get an untrusted error when Firefox has stored missing intermediate certificates to visit a server in the past that a send it, but you get an untrusted error if this intermediate certificate is not yet registered.

• An Application incompatible mobile partners and detected but does not always

  Acknowledge troubleshooting see the report are fix the incompatible program-Mobile Partner (broadband pilot-Huawei E1552) but still does not resolve the application respective icon still showed her suffer from inconsistent failure. Please help. TQVM

  Hello

  1. what operating system do you use?

  2. what exactly do you mean by ' Application Incompatible mobile partners and detected but does not always '?

  3. What is the exact problem you are facing the computer?

  Provide more information on the issue to you help again.

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

  I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

  Hi eri2198859,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error 'BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR does not support mobile projects."

  Hello

  I installed Adobe Flash Builder Burrito and Blackberry Tablet OS SDK 0.9.4 on Windows 7. When I start to create a new project by selecting the ' New/ActionScript Mobile Project' menu, then in the new dialog box project of Mobile of ActionScript, I give a project name, and then choose 'BlackBerry Tablet OS SDK 0.9.4 for Adobe Air. At this point, the 'Next' button is gray on an error message on top as "BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR does not support mobile projects.". Is there something that I am missing?

  I read somewhere someone comlains error message "BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR support not projects mobile." occurs after installing Blackberry Tablet OS SDK 0.9.4 while there is no problem with Blackberry Tablet OS SDK 0.9.3. If it is true, where can I download Blackberry Tablet OS SDK 0.9.3?

  Thank you very much in advance,

  John

  @johnwneg, make sure that when installing FB Burrito, you:

  (1) run the installer as administrator.

  (2) select English International rather than NA English.

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• BlackBerry Smartphones using missing synch for Blackberry Storm - does not contact sync etc.

  Initially, I downloaded pocketmac, who has never worked at all. He even does recognize the blackberry on the mobile icon, so I bought your missing sync for blackberry download.
  I've updated some contacts in the address book and then I set the plugin contact crush the next synchronization only. It did not work.

  He wanted initially to delete all my contacts of device: error more than 5% of your contact records will be changed. So, I followed the steps that provide you technical support for it. backup ical and return on the database and do with the address book then reset isync. I re-entered my AddressBook updated some new contacts and added a few photos to their cards and changed preferences to include the job titles. Then I tried to sync again (after restart and reset blackberry app) he copied on some of the contacts in the address book and others with and without pictures?

  On the blackberry in contacts, some have a space for an image to add and others not, despite me to add photos to the address book.

  Also, I added a map for me because I was instructed to do when I tried to send an invitation ical for a participant to a photo shoot and told me: you must create an address for yourself card in the address book of Mac OS X, but I created a? This means constantly every time.

  I just did the last synchronization, ical appointments worked, but I got an error message at the end saying:
  The calendar that you specified for tasks that are created on the device is no longer exists. Please, open the settings of the plugin dialog box tasks and select another calendar.
  Tasks: There is a problem with the plugin configuration tasks. Please, open the settings of the plugin of the tasks dialog box and make sure that the settings are correct.
  I'm not sure what that means that there is no such thing as the plugin configuration task on the blackberry storm, that I can find.
  Any help would be greatly appreciated and I will pass this on too many other press photographers in London which are all looking forward to register for the new storm, but will probably have much less patience and perseverance than me who happens to start all
  Best regards
  Juliette

  Juliette says:
  Also, I added a map for me because I was instructed to do when I tried to send an invitation ical for a participant to a photo shoot and told me: you must create an address for yourself card in the address book of Mac OS X, but I created a? This means constantly every time.
  Best regards
  Juliette

  I intend as a result tomorrow when my Storm (could actually be a couple of days, but I promise you, as soon as POSSIBLE). However, on your Mac, in the address book application follow these steps if you do not.

  (1) (to select the map that you created yourself (highlighted)

  (2) in the map menu, select make this card my card

  Just because you created a card with your info is not enough.

  Hope this helps, & hope I can help more as soon as POSSIBLE!

• iPhone downloads ios 9.3 5s but does not install it?

  I got 82% battery. I decided to update to 5 s to 9.3. It download the update in about 10 min and off (as usual) to start the installation. But he never started a few leftovers. If I turn it on or do not disturb the process. It's been about 30 minutes now, I don't this is normal. Help, please.

  See if you can force restart the iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Keep in mind, much better update your iPhone when connected to a power source, not only using battery alone.

• Installed Windows 7 Service Pack 1 (KB976932) by using Windows Update, but does not indicate the system

  I installed Windows 7 Service Pack 1 (KB976932) by using Windows Update, but it does not appear on the window of the system. Is it up? What should I do?

  Press Windows key + R

  Type: winver

  Press enter

  Does say Windows 7 Service Pack 1 in the About dialog box?

  You can also check under properties

  Click Start, right click on computer

  Click on properties

  Look under Windows edition.

• Trying to connect Xbox 360 to Internet using laptop with Windows 7, but am not finding the 'Share' button in the network connections and I don't have the ability to "bridge connections".

  Sorry about the long title, but it pretty much says my problem. I am trying to connect my Xbox 360 to my Windows7 laptop with the ethernet cable. I have a home network that the wireless laptop works out of. When I go into the control panel network connections section, I can't find the 'Sharing' tab that says that every tutorial I can find there should be. Tutorials can say to go to the screen that shows your wireless connections, highlight your home network and the network to your Xbox and then right click and press "bridge connections". I do not have the option for bridge connections. Can anyone help?

  After having connected the laptop and Xbox with an Ethernet cable, you should be able to enable sharing of Internet connection on the wireless network connection:

  1. Make sure that the two network connections are enabled.
  2. Right click on the wireless network connection.
  3. Click on Properties .
  4. Click sharing .
  5. Put a check mark in the check box under Internet connection sharing .
  6. Click OK .

  After you enable ICS, not bridging the connections. Boulder computer Maven
  Most Microsoft Valuable Professional

• Using Lightroom 5.5 when I merge to 2014 Photoshop Panorama opens but does not load the images

  Running on iMac running the Mavericks.  Worked... unfortunately do not remember the last time I did it.  But this is a feature I use all the time.  Have the same problem if I just tried to edit in Photoshop CC.  He started, but no image in Photoshop.  Not sure that I used it because I upgraded to Photoshop for 2014 CC.

  Any ideas would be appreciated.

  Uninstall and reinstall PS CC 2014.  This version fixes images not appearing is not in PS for most people.

• Why CF10 does not include the upgrade to CKEditor 3.6 x?  Still using the old version of FCK?

  I have confirmed with Charlie Arehart as CF9 CF10 using the same version of 'old' of FCKeditor, running of argument cftextarea richtext option.  The CFIDE in the two editions (for example, C:\ColdFusion10\cfusion\wwwroot\CFIDE\scripts\ajax\FCKeditor\fckeditor.js) reports this:

  FCKeditor.prototype.Version = ' 2.6.4.1. "

  FCKeditor.prototype.VersionBuild = "23187 ';

  This version of the editor is no longer supported by the company that build the plugin (scroll to the bottom of this link): http://CKEditor.com/download

  The latest version has more plugins and support that would be very useful, such as syntax highlighting of code source rich text and line numbers.  A lot of Googling indicates, at one point, there was a plugin for the old FCKeditor for syntax highlighting, but these sources are no longer available (e.g., the website went dark).

  Anyway, jumping from CF9 to CF10 being a big deal, I'm just surprised that adobe did not understand this upgrade as well.  Please correct me if I'm wrong, or else please consider this my request to include the editor of upgrade to the production version.  Thank you.

  We were not able to be upgraded to FCKeditor in CF10 (if it was originally in the bucket of elements to consider) because of other priorities to come.

  We will try to work on this area CF10 post.