Not informed of Format .ai owner during the Migration of the Dollar Club

Similar Questions

• My laptop loses its STARTUP information after it was closed during the night

  original title: STUMPER! My laptop loses its STARTUP information after it was closed during the night?

  I have a problem very intrigueing that I can't understand. I can do a clean install of Vista Ultimate(32 or 64 bit), on my gateway M285 - E Tablet PC. Once it's done and I did not yet updates, if I stop the system at night, I wake up and you try to boot the system and get a blue screen (which finally tells me that my "disk.sys" file is missing. I tried plugging it down in increments to see when this file, in fact, is lost. I stopped for about 1 1/2 hours and it will start fine, but during the night, it won't.

  Then I tried a fresh install and did all the updates available, same thing. I tried to start a "memory test and everything is fine." I even did the memory more intense test (which takes forever, by the way... lol). I also did "chkdsk", as well as all viruses and malware, etc. tests with Norton first Edition.

  I got to the point where I now have 3 separate "disk images" that I created to save time in my software I want to use this system of loading. We're just a clean install, that no update, other clean install available updates. and the last with a clean install with all my software MS Office, Adobe Creative Suite and Autodesk Entertainment and all of their updates.

  I did this for if I'll actually somehow solve this problem I can easily use the "disk image" I want... No...

  Oh yes, I also all my drivers up to date etc.

  Any help on this issue would be greatly appreciated.

  EDIT:

  Another problem related to this situation, it's the hard drive becomes undetectable, so I have to use a software such as Ubunta starting vehicle, which has its own operating system, so I can actually format my hard drive to start the installation process. (otherwise my Vista installation won the same recognize I have a hard drive, not to mention operating system to try to resolve, such as startup repair, System Restore, etc.)

  I finally figured it... xD is a hard drive diver who has been desgned for WinXP and for some reason any were never changed during the installation of Vista on this system or automatic updates.

  It was actually the IDE ATA/ATAPI controllers, specifically the Intel SATA AHCI Controller. I used "Driver Whiz/Detective", which would install most drivers via a base file system are integrated.

  The controller AHCI SATA Intel(r) has not, it only downloaded a .zip file that contains the following files:

  IaStor.sys
  iaAHCI.cat
  iaAHCI.inf

  These were to actually be manually installed. "Even if I had downloaded and extracted the files, when I tried to update the driver"Intel SATA AHCI controller"via Device Manager" through the command of newer driver search. It does not always detect it them, stating that I already had the best and latest drivers already installed.

  Then, for some reason that just kept on bothering me, because "Driver Whiz/Detective kept indicating that it was the best version of the driver for my system.

  So, I finally tried to update the drivers manually by specifying exactly where these files are located on my system. Then he finally recognized them and installed them.

  According to me, given that this system is an older model 'Gateway M285-E Tablet PC', even if it is Vista compatible, he has always maintained the operating system higher available for WinXP, through any auto detect in the BIOS. Even in the settings of the BIOS OS I tried assigning 'Other', because the only other options were Win95, Win98, WinMe, Win2000 and WinXP.

  So having not the 'Intel(r) SATA AHCI controller"recognizing a Vista OS after be closed for a period of time, it would try to load a Windows XP operating system, and have failed to do. Strange, but is the only explanation I can offer for her.

  Thanks for the help,

  Wayne

• My 8 window is not updated and updates are appearing during the verification of updates.

  Original title: updates

  my 8 window is not updated and updates are appearing during the verification of updates

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• Error 2738 could not access VBScript Runtime for custom during the installation of a turbostick action.

  I am trying to install a turbo stick on my acer aspire - and getting a 2738 error could not access VBScript Runtime for custom action. I am running windows 7 and acer and Bell - my provider have not been able to help.

  Kevin

  Hey Kevin,

  Thank you for the update.

  1. Run as administrator command prompt:
     1. Menu start-> all programs-> Accessories
     2. Right-click on command prompt and select run as administrator
  2. Type the following command at the prompt: reg delete "HKCU\SOFTWARE \Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}" /f, then press on enter.
  3. Then, you must also type the following command: c:\windows\system32\regsvr32 vbscript.dll, and then press ENTER.

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Windows 7 will not work clean format goes directly to the installation

  This is a new OEM CD.   I WANT my hard drive SLOW FORMATE to NTFS.  I want to be sure that my DRIVE is completely clean.    I tried to delete the partition and the new etc...  BUT I CAN'T FORMATT SLOW OPTION!

  Windows 7 KEEPS SKIPING procedure on implementing shaped and goes directly to the installation. Installation work, but I'm not statisfied that the disc has been formatted always.      I s there a livke simple format.exe in the old days of BACK?

  To format drive:

  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  7. click on the command line

  8. at the command prompt, type: FORMAT C: /.

  Press enter on your keyboard

  Type y for Yes

  Press enter

  Please wait while the drive is formatted.

  Type exit to close the command prompt, and then click farm to shut down the computer.

• How to prevent the formation of bubbles during the use of paper in HP Matte adhesive polypropylene

  I use a printer of z5200 with adhesive polypropylene post script. I maintain a Board printing fine hard that I buy at Home Depot. I noticed that on the occasion, bubbling will occur and is excellerated with heat. I wonder what are the best substrates for secure grip or how I can improve the adhesion to the substrate that I currently use? I'll need a substrate that will resist the elements so foam or matte Board are not an option.

  Thank you very much!

  Hello geric10,

  This helps your on the outside of the application? Well ok, but it depends on what this hardboard, is respect you. You need an application-specific adhesion promoter, but nobody on this forum will have experience with plastics, etc.

  I would also ask on a commercial impression forum like Forums - PrintPlanet.com or Printing & Color Printer Forum .

  You have more success here.

  Sorry... I know that doesn't answer the question, but I hope that points you in the right direction.

• I do not have a printer icon dispalyed during the use of the internet with Windows 8

  When you use the internet, through Windows Vista, all icons have been displayed (printing etc.), but I don't have this with windows 8.

  Thank you for your time.

  Hello Robert,.

  If you print from a modern application, you can access your printer (if the drivers have been installed) app-> charm-> appliances-> printer.  It's the same thing for IE using the interface user of Moder.

  Mark

• Cannot read the format of most of the files are downloaded as

  I migrated the Club Photo of dollar, I just tried, for the first time, to download an image, in fact, it happened on 2 of the 3 images that I downloaded.  First come down like JPG, NO PROBLEM!  The other two are down as. HAVE?  I don't have the software to view OR do I want to buy it, I WANT my downloads in JPG format as I was getting of the DPC.  I am very disappointed that phone support is not available for this product, DPC has, needless to say, I'm FRUSTRATED!

  Someone please Help!

  Hi Oscarc60849838

  Please see the thread below where the request has been addressed:

  Not informed of Format .ai owner during the Migration of the Dollar Club

  See also:

  Common questions, Adobe Stock

  Support for file formats and Adobe Creative Cloud applications

  http://www.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe_Stock_Terms-en_US_20160616 .pdf

• Records of files does not display during the recording of the converted web page in Internet Explorer

  I have recently installed Windows 10.  I use Acrobat Pro 10.  Now, when you convert a web page in an Acrobat document, when I click on "Save as", most of the shirts in my OneDrive folder do not appear.  This only happens during the conversion of a web page to a pdf Acrobat file.  If I save the web page converted into my office and open it from there, I can see and access all the OneDrive file records.

  Any idea what's going on here?  I tried uninstalling and reinstalling Acrobat but that did not help.  Thank you.

  Acrobat X (10) is not compatible with Windows 10.

• Error blue screen "a clock interrupt was not received on a secondary prossesser in the allotted time interval.

  I get a blue screen that says that this A clock interrupt was not received on a secondary prossesser in the allotted time interval

  * original title - an interruption of clock has not received on a secondary owner in the amount of time allocated Windows stops and I get a blue screen that says this *.

  It is likely that your CPU is a failure.

  However, before replacing, try this

  1. If you are overclocking the processor, back to normal speed
  2. To avoid overheating, get a can of compressed air and dust out of your computer
  3. Go to the website of the manufacturer of the computer, download and install the latest drivers and BIOS for your model

• 2013 SharePoint will not correctly configure IIS during the prior installation on Server 2012 R2 Datacenter

  I'm currently trying to install SharePoint 2013 on 2012 R2 Datacenter Server. I have SQL 2012 with SP1. I tried to install the prerequisite several times and continue to receive an error during the configuration of IIS. Here is the log file:

  2015-06-11 16:58:41 - processor architecture is (9)
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41 - common startup
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell folders
  2015 06-11 16:58:41 - the value is...
  2015-06-11 16:58:41 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  2015-06-11 16:58:41 - try to remove the start task if there is place.
  2015-06-11 16:58:41 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
  2015-06-11 16:58:41 - error: there is no startup task. This is not a continuation after a reboot.
  2015-06-11 16:58:41 - analyze the following command-line argument:
  2015-06-11 16:58:41 - /SQLNCli:c:\sharepoint2013bits\PrerequisiteInstallerFiles\sqlncli.msi
  2015-06-11 16:58:41 - found the following command-line option:
  2015-06-11 16:58:41 - SQLNCli
  2015-06-11 16:58:41 - found the following custom file location:
  2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\sqlncli.msi
  2015-06-11 16:58:41 - analyze the following command-line argument:
  2015-06-11 16:58:41 - /IDFX:c:\sharepoint2013bits\PrerequisiteInstallerFiles\Windows6.1-KB974405-x64.msu
  2015-06-11 16:58:41 - found the following command-line option:
  2015-06-11 16:58:41 - IDFX
  2015-06-11 16:58:41 - found the following custom file location:
  2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\Windows6.1-KB974405-x64.msu
  2015-06-11 16:58:41 - analyze the following command-line argument:
  2015-06-11 16:58:41 - /IDFX11:c:\sharepoint2013bits\PrerequisiteInstallerFiles\MicrosoftIdentityExtensions-64.msi
  2015-06-11 16:58:41 - found the following command-line option:
  2015-06-11 16:58:41 - IDFX11
  2015-06-11 16:58:41 - found the following custom file location:
  2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\MicrosoftIdentityExtensions-64.msi
  2015-06-11 16:58:41 - analyze the following command-line argument:
  2015-06-11 16:58:41 - /Sync:c:\sharepoint2013bits\PrerequisiteInstallerFiles\Synchronization.msi
  2015-06-11 16:58:41 - found the following command-line option:
  2015-06-11 16:58:41 - Sync
  2015-06-11 16:58:41 - found the following custom file location:
  2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\Synchronization.msi
  2015-06-11 16:58:41 - analyze the following command-line argument:
  2015-06-11 16:58:41 - /AppFabric:c:\sharepoint2013bits\PrerequisiteInstallerFiles\WindowsServerAppFabricSetup_x64.exe
  2015-06-11 16:58:41 - found the following command-line option:
  2015-06-11 16:58:41 - AppFabric
  2015-06-11 16:58:41 - found the following custom file location:
  2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\WindowsServerAppFabricSetup_x64.exe
  2015-06-11 16:58:41 - analyze the following command-line argument:
  2015-06-11 16:58:41 - /KB2671763:c:\sharepoint2013bits\PrerequisiteInstallerFiles\AppFabric1.1-RTM-KB2671763-x64-ENU.exe
  2015-06-11 16:58:41 - found the following command-line option:
  2015-06-11 16:58:41 - KB2671763
  2015-06-11 16:58:41 - found the following custom file location:
  2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\AppFabric1.1-RTM-KB2671763-x64-ENU.exe
  2015-06-11 16:58:41 - analyze the following command-line argument:
  2015-06-11 16:58:41 - /MSIPCClient:c:\sharepoint2013bits\PrerequisiteInstallerFiles\setup_msipc_x64.msi
  2015-06-11 16:58:41 - found the following command-line option:
  2015-06-11 16:58:41 - MSIPCClient
  2015-06-11 16:58:41 - found the following custom file location:
  2015-06-11 16:58:41 - c:\sharepoint2013bits\PrerequisiteInstallerFiles\setup_msipc_x64.msi
  2015-06-11 16:58:41 - details of the current operating system:
  2015-06-11 16:58:41 - the operating system major version number: (6)
  2015-06-11 16:58:41 - minor version of the operating system number: (2)
  2015-06-11 16:58:41 - Build number of the operating system: (0X23F0 = 9200)
  2015-06-11 16:58:41 - the latest Service Pack major version number: (0)
  2015-06-11 16:58:41 - the latest Service Pack minor version number: (0)
  2015-06-11 16:58:41 - ID of the operating system platform: (2)
  2015-06-11 16:58:41 - suites of products available in the operating system: (0 X 190 = 400)
  2015-06-11 16:58:41 - operating system product type: VER_NT_SERVER
  2015-06-11 16:58:41 - product type: (8)
  2015-06-11 16:58:41 - type of OS: (0)
  2015-06-11 16:58:41 - configuration of the property sheet for the application.
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - Windows Management Framework 3.0
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41 - PowerShellVersion
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
  2015 06-11 16:58:41 - the value is...
  2015-06-11 16:58:41-4.0
  2015-06-11 16:58:41 - a newer version of the above condition is already installed
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - Microsoft .NET Framework 4.5
  2015-06-11 16:58:41 - read the following DWORD value name...
  2015-06-11 16:58:41 - install
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
  2015-06-11 16:58:41 - the value is (1)
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41 - version
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
  2015 06-11 16:58:41 - the value is...
  2015-06-11 16:58:41-4.5.51650
  2015-06-11 16:58:41 - mail .NET 4.5 release is installed
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - Windows Identity Foundation (KB974405)
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41-
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\Windows identity Foundation\Setup\v3.5
  2015 06-11 16:58:41 - the value is...
  2015-06-11 16:58:41-6.1.7600.0
  2015-06-11 16:58:41 - the above condition is already installed
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - Microsoft Sync Framework Runtime v1.0 (x 64) SP1
  2015-06-11 16:58:41 - reading version of the following file...
  2015-06-11 16:58:41 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
  2015-06-11 16:58:41 - GetFileVersionInfoSize failed (-2147024894)
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - client native Microsoft SQL Server 2008 R2 SP1
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41 - version
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - Windows Server AppFabric
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41 - ProductVersion
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\AppFabric\V1.0
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - Windows Identity Foundation (KB974405)
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41-
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\Microsoft identity Extensions\Setup\1.0
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015 06-11 16:58:41 - Microsoft Protection information and Control Client
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41-
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - Microsoft WCF Data Services 5.0
  2015-06-11 16:58:41 - read the following string value/name...
  2015-06-11 16:58:41 - version
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
  2015-06-11 16:58:41 - check if the following condition is installed:
  2015-06-11 16:58:41 - update Cumulative Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
  2015-06-11 16:58:41 - read the following DWORD value name...
  2015-06-11 16:58:41 - IsInstalled
  2015-06-11 16:58:41 - from the following registry location...
  2015-06-11 16:58:41 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
  2015-06-11 16:58:46 - start download/install
  2015-06-11 16:58:46 - created the thread for the installer
  2015-06-11 16:58:47 - "C:\Windows\system32\ServerManagerCmd.exe" - inputpath 'C:\Users\ADMINI~1\AppData\Local\Temp\1\PreF30A.tmp.XML '.
  2015-06-11 16:58:47 - error: cannot install (2)
  2015-06-11 16:58:47 - error: [in HRESULT format] (-2147024894)
  2015-06-11 16:58:47 - last return code (2)
  2015-06-11 16:58:47 - read the following DWORD value name...
  2015-06-11 16:58:47 - flags
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47 - PendingFileRenameOperations
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SYSTEM\CurrentControlSet\Control\Session Manager
  2015-06-11 16:58:47 - read the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
  2015-06-11 16:58:47 - error: the tool was unable to install the Application Server role (IIS) Web server role.
  2015-06-11 16:58:47 - last return code (2)
  2015-06-11 16:58:47 - options for other diagnostics: 1. find the value of return code 2. Download the prerequisite manually and check the size uploaded by prior Setup. 3. install the prerequisites manually from the location given without any command line options.
  2015-06-11 16:58:47 - can't start over
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Windows Management Framework 3.0
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47 - PowerShellVersion
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
  2015 06-11 16:58:47 - the value is...
  2015-06-11 16:58:47-4.0
  2015-06-11 16:58:47 - a newer version of the above condition is already installed
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Microsoft .NET Framework 4.5
  2015-06-11 16:58:47 - read the following DWORD value name...
  2015-06-11 16:58:47 - install
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
  2015-06-11 16:58:47 - the value is (1)
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47 - version
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\Net framework Setup\NDP\V4\full
  2015 06-11 16:58:47 - the value is...
  2015-06-11 16:58:47-4.5.51650
  2015-06-11 16:58:47 - mail .NET 4.5 release is installed
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Windows Identity Foundation (KB974405)
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47-
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\Windows identity Foundation\Setup\v3.5
  2015 06-11 16:58:47 - the value is...
  2015-06-11 16:58:47-6.1.7600.0
  2015-06-11 16:58:47 - the above condition is already installed
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Microsoft Sync Framework Runtime v1.0 (x 64) SP1
  2015-06-11 16:58:47 - reading version of the following file...
  2015-06-11 16:58:47 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
  2015-06-11 16:58:47 - GetFileVersionInfoSize failed (-2147024894)
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - client native Microsoft SQL Server 2008 R2 SP1
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47 - version
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Windows Server AppFabric
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47 - ProductVersion
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\AppFabric\V1.0
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Windows Identity Foundation (KB974405)
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47-
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\Microsoft identity Extensions\Setup\1.0
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Microsoft Information Protection and Control Client
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47-
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - Microsoft WCF Data Services 5.0
  2015-06-11 16:58:47 - read the following string value/name...
  2015-06-11 16:58:47 - version
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
  2015-06-11 16:58:47 - check if the following condition is installed:
  2015-06-11 16:58:47 - update Cumulative Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
  2015-06-11 16:58:47 - read the following DWORD value name...
  2015-06-11 16:58:47 - IsInstalled
  2015-06-11 16:58:47 - from the following registry location...
  2015-06-11 16:58:47 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
  2015-06-11 16:58:56 - opening the log file
  2015-06-11 16:58:56 - open for user action
  2015-06-11 16:58:56 - C:\Users\ADMINI~1\AppData\Local\Temp\1\PrerequisiteInstaller.2015.06.11-16.58.41.log

  I also looked for a solution of TechNet and found that there is a KB to install (2771431) (located here: https://support.microsoft.com/en-us/kb/2765260?wa=wsignin1.0 ), but when I try to install it I get the following error: "the update is not applicable to your computer. I also tried the second step, if the installation does not work and it has not yet. Any help would be greatly appreciated. Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Why my PC does not restart during the installation of XP?

  I want to install XP on my desktop and its all good and restarts after having pre installed (when windows copies the files), then the windows loading logo shows, then it starts to install with the control points on the right as follows:

  @ collecting information
  @ dynamic update
  @ preparation facility
  Installation of windows
  O development of installation

  It gets to half way with the installation of windows then restarts whenever it gets to this point. It fails in the regional and Language Options Page. I know I did right, see the link.  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP I disconnected everything (tv, extra fans, of the additional USB ports for the front and the extra RAM card sound card, graphics card,) and tried again from scratch. Everything is plugged is monitor (on board), power supply, USB mouse with a connector PS/2, USB keyboard, 1 x 1 GB RAM, 1 x 80 GB HD and 1 x DVD player.

  Help!
  Thanks in advance.

  Hello

  -Remove the existing disk partitions before performing a new installation?

  If so, follow these steps to do the same thing:

  a. Insert the Windows XP CD-ROM into your CD-ROM drive.
  b. at the welcome page in the Setup program, press ENTER to continue.
  c. press F8 to accept the license agreement for Windows XP.
  d. If an existing Windows XP installation is detected, you will be asked to fix it. At this point, press ESC (not repair).
  e. the screen now lists all existing partitions and unpartitioned for each hard drive space. Use the cursor/arrow keys to choose a place to create the new partition. Press D to delete an existing partition, or press C to create a new partition in the unpartitioned space.

  If you press D to delete an existing partition, you must then press L (or press ENTER and then press L if it is the system partition) to confirm that you want to delete this partition.

  Repeat this procedure for each of the existing partitions that you want to delete (or move) to create your new partition. When all necessary partitions are deleted, you can then select the remaining unpartitioned space and then press C to create new partitions.

  Note: If you want to create a partition where there is already at least one partition, you must first delete the existing partitions and then create the new partition. Type the size in megabytes (MB) that you want the new partition to be. And then press ENTER. Alternatively, you can just press ENTER to create the partition using all of the available space (for example to create the largest possible partition).

  If you want to install Windows XP, use the arrow keys to select the partition where you want to install Windows XP, and then press ENTER.

  More information on:

  How to install or upgrade to Windows XP

  Differences between a quick format and a regular format during a "clean" of Windows XP installation

  Note: Clean installation/format the partition will erase all the data and install XP

• "An error occurred during the application of the security information to G:\ Trash' access denied.

  original title: Lost Forever?

  After you change the permissions for an external hard drive, I was unable to open the files on this disc. Then I tried to reverse what I did and when I choose apply I get the message error "an error occurred during the application of the security information to G:\. Trash' access denied. the user, I'm changing the permissions is "creator/owner.

  If you choose to continue you get the same error message with different location after g:. If you click Cancel the message is ' stop the spread of the permissionsettings leads to a contradiction of State in which some objectshave settings but others not. " If you have made the change by mistake, you must apply the correct change immediately. to achieve a consistent state. I don't know what I did wrong. do not remember because she has been veterinary disabled brain damaged. Thank you!

  Hello

  You must take ownership of files and folders. Do follow link below:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders