List of Vista SP2-compatible routers

Similar Questions

• KB2585542 for vista SP2 is not listed in the microsoft updates

  Hello

  I have a Windows Vista Enterprise SP2 32 bit OS. where is installed without Microsoft Updates.
  When I ran/scan of Microsoft Updates, MS12-006 (2643584) from Jan 2012 recent PT in which KB2585542 for vista SP2 is not listed in microsoft updates.
  Y at - it an update to install before you get to the KB2585542 in the Microsoft updates.

  You will find appropriate support for Vista Enterprise in IT Pro forums-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro

• Vista SP2 wireless connection drops

  People, I know this question has been asked before, but I can't find a solution to my problem.  I've had my Dell laptop for about 6 months now and it worked perfectly, without any problem wireless connection.  On Sunday, August 9, I installed Vista SP2.  It updated no problem at all, but once he did his final reboot, it connected to my wireless router for about 5 minutes, then dropped connection.  Now, when you restart it only connects for a minute or two wireless then abandons connection.  I then uninstalled SP2 but it has not solved the problem with wireless.  My wireless adapter is an Atheros AR5007 and drivers are all up to date.

  Anyone know how I can fix this so that my wireless signal stay tuned as he used to pre SP2?
  Thank you.

  Hi KK_14,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Fixing the problems of common networking in Vista:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.Microsoft.com/default.aspx/KB/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/ (how to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  On the Edit menu, point to new, and then click DWORD (32-bit) value.

  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  In the value data box, type 1 and then click OK.

  Close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Please let us know if it helps.

  Thank you and best regards,
  David

• Vista SP2 not allowing not Internet connection

  I recently installed the new windows vista sp2. Now, I did that I was not able to connect to a wireless network and the internet sometimes decides to work when it is connected through the LAN.

  I went back to sp1, and now it is fine.

  does anyone else have this problem? If yes how can I fix?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  So that the network is working properly, let's check to see if your network services are working properly.

  1. open the Start Menu

  2 type services in the start search box and press enter

  3. click on continue in the UAC prompt

  4. search for network connections, network list Service, knowledge of network and Service of Network Store Interface locations

  5. check that the status is set to started and Startup Type is set to automatic

  6. If this is not the case then right-click the service and select start to start the service

  7. make a right-click the service and select Properties, change the startup type to automatic

  8. repeat if necessary for the services listed in step 4

  If you still have the problem of connection to the network or to the internet follow this steps that fixes most of the problems of connectivity.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  On the Edit menu, point to new, and then click DWORD (32-bit) value.

  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  In the value data box, type 1 and then click OK.

  Close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  The only program that I'm aware of that currently relies on IPv6 is the new Windows meeting space. The first 2 changes will cause this program is not to work - but all of your normal (IPv4) connections will leave unaffected. If it causes problems that you can't overcome, simply go back to the original settings.

  To clear the DNS cache:

  Click Start, type cmd in the search box, and then click cmd in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Once at the command prompt, type ipconfig/flushdns

  You can click on the link to try a few other network basic troubleshooting steps

  Network connection problems:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Vista SP2 (and Net framework 3.5 Family update) fails to install

  Hi, Windows update always fails to install Vista SP2 & Net framework service pack 1 & family update Net framework 3.5 with error code 80073712. I believe that I have now installed the Net framework updates to download and install them individually or in sequence with NDP35SP1-KB958484 - x 86.exe the last to be installed, apparently with success. Unfortunately, Windows update still lists this update as needing to be installed, and that fails to do so. SP2 fails to install with updated Windaows as well, so I downloaded and installed as described in the Article ID: 947366 - last review: June 3, 2009 - revision: 6.1 how bad turn Windows Vista and Windows Server 2008 service pack installation issues, install the tool available to update Windows KB957821 system successfully, restart the PC , the deactivation of all the components of McAfee, but again error: ERROR_SXS_COMPONENT_STORE_CORRUPT (0 x 80073712). I'm open to suggestions as to how I can solve 2 problems. Thank you

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows vista SP2 update failed twice

  error code 800F0816 - when the vista sp2 update is completed and the facilities, it goes in a restart, windows does not load and I get the error code after crossing the repair mode

  The error is related with component maintenance (EC).
  According to this list of common CBS errors:

  800F0816 - express package was not completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).
  There is no action required on your part, wait for the express package is downloaded.

  Alternatively, you can:

  (1) post this question on the forum Vista and Windows Server 2008 Service Pack 2 .
  2) Contact Ms. for * support for free * to get SP2 installed.
  (3) to download the full package standalone SP2, Save and then read this prior to installation:
  Learn how to install Windows Vista Service Pack 2 (SP2)

  All the foregoing does not mention it, suggests strongly that you be completely and totally turn off the installed
  Suite antivirus/security surveillance system or even uninstall it before you attempt the installation of SP2.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Vista SP2 does not auto update

  Vista SP2 is not in the automatic update, while all other updates are normally found. I have all necessary installed update that is required for SP2, including SP1. How can I fix?

  Thank you!

  Eric

  Both - SP2

  Hardware and software which if present will result in Windows Update does not offer a service pack Installation problems are known to occur with the hardware and software in the following list. Service Pack 2 for Windows Vista and Windows Server 2008

  • Systems of Intel ICH7 with Bluetooth that are connected to a USB 2.0 hub

    Service Pack 2 for Windows Vista and Windows Server 2008 is not available through Windows Update for customers who have an Intel ICH7 with Bluetooth system that is connected to a USB 2.0 hub. There is a known issue with the service and the hardware configuration. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

    970408 (http://support.microsoft.com/kb/970408/) A Bluetooth device stops working intermittently on a computer that is running Windows Vista Service Pack 2
  • vLite

    If you used vLite to customize your Windows Vista installation, you may have removed required system components. To work around this problem, install the latest version of vLite. For more information, see at the following vLite Web site:

    http://www.vLite.NET/ (http://www.vlite.net/)
  • HP TouchSmart IQ700 models of computers

    There is a known compatibility issue between SP2 and the specific USB hardware on the motherboards of this range of products.

  • Windows Live Messenger 14

    There is a compatibility problem with Windows Live Messenger 14. An upgrade of the operating system causes Windows Live Messenger 14 to stop working. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

    972634 (http://support.microsoft.com/kb/972634/) you cannot start Windows Live Messenger 14.0 after installing a service pack Windows

    Etc.

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install Vista SP2; 'upgrade' disabled when I try and re - install by KB958044

  Hello

  After three days of struggle with trying to get Vista Ultimate (purhcased at the United States) SP2 update, and several failures of various updates automatically downloaded from Windows Update: I finally found and read

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/09c291bf-3868-4DFA-8004-139ec8018aa1

  MS response has been a link to: http://support.microsoft.com/kb/958044

  But when I try to follow the instructions in KB958044: 'upgrade' is disabled.

  I don't really wish to throw three days work of re - install my programs, tweak the settings, etc.

  Thank you, Bill Woodruff Bill Woodruff

  Hi Bill Woodruff.

  Because the standalone SP2 package failed with the error: '0 x 80070490', you can try to run Checksur (KB947821) to address corruption in the manifest of component maintenance (EC) and try to install SP2 Standalone Package.

  To run Checksur (KB947821) follow the mentioned below as follows:

  (1) download and run the system update by the following article preparation tool: KB947821. Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  (2) put the computer in Cleanboot before installing the stand-alone Package of SP2:

  To perform the cleanboot, refer to:

  Click Start, type msconfig in the search box and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on continue. On the general tab, click Selective startup, Selective Startup.Under, clear the check box load startup items. Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all. Click OK.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use: http://support.microsoft.com/kb/939671

  (3) try to install the stand-alone Package for Windows Vista SP2.

  (4) after Installation of SP2, put the computer in Normal mode:

  Click Start and type msconfig in the box start the search. On the general tab, select "NORMAL STARTUP". Click on apply, then OK. When you are prompted, click on restart.

  However if SP2 fails to install again, then you can have make a repair or Installation upgrade Inplace of Vista to install SP2 as mentioned in article KB958044 after uninstalling SP1.

  During the Upgrade Installation process, you will get the options go online to get the latest updates for installation and do not receive updates for installation. If you choose the option to go online to get updates, then it tries to download updates for the installation process, the windows updates required for Installation, including driver updates and it won't include all the latest Service Packs for Windows Vista.

  If you get an error "upgrade is disabled" when you try the Inplace upgrade, it may be due to a version of Windows Vista with Service Pack 1 installed, you can not upgrade by using media that does not Service Pack 1. If you have a drive without SP1 and SP1 is installed on the computer as an update, you need to maybe uninstall SP1 first and then start the Installation of upgrade or you can arrange a full disc with SP1 to make Installation of upgrade by using the product key came with your upgrade disc.

  For more information, please visit the link: http://support.microsoft.com/kb/951247

  If you try to uninstall SP1 to upgrade Installation, you can follow the mentioned below as follows:

  1) click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list programs.
  (2) If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3) click View installed updates. Click service (KB936330) package you want to uninstall, and then click on uninstall.

  For more information, please visit the link: http://support.microsoft.com/kb/948537

  Hope this information is useful.

  Let me know if it worked.

  With regard to:

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot see Vista SP2 to windows update? (I tried a lot of methods)

  Since SP2 was released a few months, but whenever I click on the Windows update of the control and audit for the update panel. It shows there is still no update for my computer.

  I tried methods, such as,.

  1. update all the drivers on my computer and make sure that there is not any error in Device Manager

  2 http://support.microsoft.com/kb/971058
  Reset windows update

  3.http://support.Microsoft.com/kb/947821
  Use the system update tool

  4 put up-to-date all the updated windows updates, SP1 included and other what I can see

  5. make aure windows update agent is the newest one

  Please let me know what I can do?

  or

  is - this microsoft have a list (seems like before SP1) which allow today of some computers that have certain types of software (I don't know which) to install SP2? I have search in microsoft KB but nothing found

  Thank you to all who read and try to answer my questions people.

  Hello

  Download standalone SP2 package from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Then perform a clean boot:
  http://support.Microsoft.com/kb/929135

  Disable the Antivirus software.

  Install the Vista SP2.

  Follow the steps to put the back n normal startup of the computer after SP2 installation from the link to boot.

  Restart the computer.

  All the best!

• Stuck in a loop of reboot computer after vista SP2 installed

  I installed the vista SP2 update earlier today, I was invited to reboot for updates could continue. When the computer starts up after windows loading screen (before the login screen appears), it says updated 1 filled with 3 but then there was an error in the installation and say he was restoring the previous settings and wait. less than a second to load the login screen steady after the previous settings have been restored, stop starting the computer. When loading to the top, it says 'error in the installation of update, restore the previous settings', then as soon as he finished and goes to the login screen it a new past in stopping and restarting. This continues constantly. If someone had a similar problem or have any ideas? When I tried to load the previous settings of windows recovery, he says there is no image to use.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Bug in Vista sp2

  It seems that XPS Document Viewer is not backward compatible after installing the Vista SP2.

  When a document is signed digitally with Vista SP2, the signature cannot be seen with Windows XP, the viewer of XPS documents.

  First of all, let me say:

  If the document has been signed by first using Windows XP and second signature that he has been signed with Windows XP or Windows Vista sp1. Everything works fine.

  I have 3 problems for example:

  1. the document was signed first by using Windows XP.  The second signature was signed with Windows Vista sp2.  The second signature is not visible to any user XP.  It seems fitting that the second signature was was never added to the document.  But the second signature can be seen by anyone with Windows Vista sp2.

  2. If the signatures of the first and second have been signed with Windows Vista sp2, then both signatures are visible to users of Windows Vista sp2, but not Windows XP users.  For Windows XP users, it seems that the document was never signed.

  3.                  3. If the document was signed by a user with Windows Vista sp2 first and then signed by a user with Windows XP, the document will give an error when opened by any user XP and Vista sp2 alike.

  In addition, if a document has been signed first with sp2 to Windows Vista, when the document is opened with Windows XP and I'm trying to view the details of the signature it says:

  Status of the signature: intention:

  Signature in the meantime:

  Signed by

  Is someone at Microsoft aware of this problem and what is someone working on it?

  Y at - it a fix for this problem?

  There is no work around?

  Hi Burtchy,
  I think that you should use the following update at least on the XP box. On each of them won't hurt.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B8DCFFDD-E3A5-44CC-8021-7649FD37FFEE&displaylang=en

  Check it out and let us know if you still have any questions.
  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• After installing the Vista SP2, IE 8 does not work well.

  After installing Vista SP2, IE 8 under my.live.com does not work.  The pages do not FLOW RSS download, links on the page at the top are not active and usually IE has out crapped.  I went to run a complete Internet security suite uninstall Trend Micro and put it in a plain Jane anit-virus program.

  I would like to keep the functioning of IE8, but switch to FireFox, if I need to see my RSS STREAM or do some serious web browsing.

  In addition, Live Messenger is no longer connect either.

  Is there a way I can safely roll back my system to SP1?  I can't live without Vista SP2.

  Hi Geekster,

  Please use the forum for Support of Vista,

  IE 8 is not a part of Vista SP2.  You can remove SP2 without removing IE8.

  Here are the steps to uninstall SP2
  Method 1: Uninstall the service pack of Windows Vista by using the programs and features item in the easiest control panel to uninstall a service pack for Windows Vista is to use the programs and features in Control Panel. To uninstall the service pack of Windows Vista by using the programs and features in Control Panel, follow these steps:

  1. Click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the programs list.
     If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  2. Click view installed updates.
  3. Click the service pack that you want to uninstall, and then click Uninstall.

     If you don't see the option to uninstall for Windows Vista service pack in the list, go to method 2.

  4. Follow the instructions that appear on the screen to complete the uninstallation.

  If method 1 does not allow to remove SP2, try different method in this article:
  http://support.Microsoft.com/kb/948537

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "sfc/scannow" was not able to repair some files, one or more of which must be in the path of an installation of Vista SP2

  I tried to install the SP2 of Vista for a few days now with no luck. Earlier today, I had a breakthrough and was finally able to install 'patch for Windows", which, after a reboot, enabled me to see the x 64 SP2 update in part"updates"of the control panel. When I tried to install that, he said he failed and gave me an error code. When I looked it up, it says try "sfc/scannow" in an elevated command prompt. The research a ton of lines of logs and errors, and after looking through, I could find these as (the least most) files problem-

  WinSAT.exe
  Amd64\HPF940AL. DLL
  PresentationBuildTasks.dll
  locale.NLS

  My question is, are any of these files required for the installation of Vista SP2 to cross? Thanks in advance for any help offered, and more information is needed, I will gladly provide.

  Extra balls (If I missed a few files problem, I'd appreciate a double check. WinSAT.exe was not who listed there, but it was listed above upward with no sign to be repaired)

  2014-06-08 14:32:54, 000002f0 CSI Info [SR] verification complete
  2014-06-08 14:32:54, 000002f1 CSI Info [SR] repair 8 components
  2014-06-08 14:32:54, CSI Info 000002f2 transaction [SR] beginning verify and repair
  2014-06-08 14:32:55, CSI Info 000002f3 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:32:55, 000002f4 CSI Info [SR] cannot repair the military record [l:20 {10}] "locale.nls" Microsoft-Windows-International-Core-Locale-NLS, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:32:56, CSI Info 000002f5 Member \SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll file hashes are not actual file [l:20 {10}] "newdev.dll": "
  Found: {l:32 b:lSyVpDkn/cMYwbuVSPH7Zs5/O8nFWBZqM2RQ9Au7lBc =} expected: n. b:KgBvBB/y3DPbBu/sLiebqGDKWCYtcAHle5YbZ1OItbU = l:32}
  2014-06-08 14:32:56, 000002f6 CSI Info [SR] cannot repair the military record [l:20 {10}] "newdev.dll" Microsoft-Windows-NewDev, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33, CSI Info 000002f7 Member \SystemRoot\WinSxS\amd64_prnhp001.inf_31bf3856ad364e35_6.0.6001.18000_none_2eef0719d90dbdd0\Amd64\HPF940AL file hashes. DLL is not actual file [l:36 {18}] "" Amd64\HPF940AL. "» DLL:
  Found: {l:32 b:skEriPi1c9ksB0gEgVdygoY5xO9Ov8GD8 / 0CX4rugB0 =} expected: {l:32 b:mU / ap55UOjxtVzdrgCzt62CW4HxfZ + uALCVLOKOcCtU =}
  2014-06-08 14:33, 000002f8 CSI Info [SR] cannot repair the military record [l:36 {18}] "" Amd64\HPF940AL. "» DLL"prnhp001.inf, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2014-06-08 14:33, CSI Info 000002f9 Member \SystemRoot\WinSxS\msil_presentationbuildtasks_31bf3856ad364e35_6.0.6001.18096_none_9bc52ef038dbf0b3\PresentationBuildTasks.dll file hashes are not actual file [l:52 {26}] "PresentationBuildTasks.dll": "
  Found: {l:32 b:cm3V/Ig0IdNHXGV6tzz8nMN2GvpxC0nujF4j/RbeCW4 =} expected: {l:32 = b:har0YuKv8pbmLU0w7b0vcjKcWyduPIiqUPx5HlaC02E}
  2014-06-08 14:33, 000002fa CSI Info [SR] cannot repair the military record [l:52 {26}] "PresentationBuildTasks.dll" PresentationBuildTasks, Version = 6.0.6001.18096, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33:02, CSI Info 000002fb Member \SystemRoot\WinSxS\amd64_prnhp001.inf_31bf3856ad364e35_6.0.6001.18000_none_2eef0719d90dbdd0\Amd64\HPF940AL file hashes. DLL is not actual file [l:36 {18}] "" Amd64\HPF940AL. "» DLL:
  Found: {l:32 b:skEriPi1c9ksB0gEgVdygoY5xO9Ov8GD8 / 0CX4rugB0 =} expected: {l:32 b:mU / ap55UOjxtVzdrgCzt62CW4HxfZ + uALCVLOKOcCtU =}
  2014-06-08 14:33:02, CSI Info 000002 fc [SR] cannot repair the military record [l:36 {18}] "" Amd64\HPF940AL. "» DLL"prnhp001.inf, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2014-06-08 14:33:02, 000002fd CSI Info [SR] this element is referenced by [l:164 {82}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18000.936330 - 161_neutral_GDR" "
  2014-06-08 14:33:03, CSI 000002fe hashes for Member file Info? \C:\Windows\Speech\Engines\SR\en-US\af031033.am are not real file [l:22 {11}] "af031033.am": "
  Found: {l:32 b:cq + 1NYUaITMpBYllzFX/LW74KgeL5QGxQ0 + PBG / 4w4 =} expected: {l:32 b:oZ + J3PjqKUUdN1O + pJQYQ8z + 5SccD + uPMQHFfMlQalE =}
  2014-06-08 14:33:03, 000002ff CSI Info [SR] repair corrupted file [ml:520 {260}, l:76 {38}] '------? \C:\Windows\Speech\Engines\SR\en-us"\[l:22{11}]"af031033.am' of the store
  2014-06-08 14:33:03, info CSI 00000300 WARNING: file [l:22 {11}] "af031033.am" in [l:76 {38}] '-? ' "" \C:\Windows\Speech\Engines\SR\en-us' switching property
  Old: Microsoft-Windows - SpeechRecognizerENU.ale, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
  New: Microsoft-Windows - SpeechRecognizerENU.ale, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
  2014-06-08 14:33:03, info CSI 00000301 Member \SystemRoot\WinSxS\msil_presentationbuildtasks_31bf3856ad364e35_6.0.6001.18096_none_9bc52ef038dbf0b3\PresentationBuildTasks.dll file hashes are not actual file [l:52 {26}] "PresentationBuildTasks.dll": "
  Found: {l:32 b:wskm5ChU9DmxqusVLNiJTnb8sdPBBokQ8Eb8nO/P5/Y =} expected: {l:32 = b:har0YuKv8pbmLU0w7b0vcjKcWyduPIiqUPx5HlaC02E}
  2014-06-08 14:33:03, info CSI 00000302 [SR] cannot repair the military record [l:52 {26}] "PresentationBuildTasks.dll" PresentationBuildTasks, Version = 6.0.6001.18096, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33:03, info CSI 00000303 [SR] this element is referenced by [l:166 {83}] "' Package_4_for_KB948610 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.6001.2123.948610 - 322_neutral_GDR" "
  2014-06-08 14:33:04, repaired Info CSI 00000304 [SR] file \SystemRoot\WinSxS\Manifests\\[l:20{10}]"newdev.dll" by copying from backup
  2014-06-08 14:33:04, info CSI 00000305 hashes for Member file? \C:\Windows\System32\newdev.dll are not real file [l:20 {10}] "newdev.dll": "
  Found: {l:32 b:lSyVpDkn/cMYwbuVSPH7Zs5/O8nFWBZqM2RQ9Au7lBc =} expected: n. b:KgBvBB/y3DPbBu/sLiebqGDKWCYtcAHle5YbZ1OItbU = l:32}
  2014-06-08 14:33:04, info CSI 00000306 [SR] repair file corrupted [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"Newdev.dll' of the store
  2014-06-08 14:33:04, info CSI 00000307 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:33:04, info CSI 00000308 [SR] cannot repair the military record [l:20 {10}] "locale.nls" Microsoft-Windows-International-Core-Locale-NLS, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33:04, info CSI 00000309 [SR] this element is referenced by [l:164 {82}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18000.936330 - 185_neutral_GDR" "
  2014-06-08 14:33:04, CSI 0000030 has hashes for Member file Info? \C:\Windows\System32\locale.NLS are not real file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:33:04, CSI Info 0000030b hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:33:04, CSI Info 0000030 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"locale.NLS '; source file in the store is also corrupted
  2014-06-08 14:33:04, CSI Info 0000030 d repair results created:
  POQ 114 begins:
  0: move the file: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\8c0159154883cf0125320000380ccc0e._0000000000000000.cdf-ms', Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms'
  1: move the file: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\ac4f59154883cf0126320000380ccc0e.$$.cdf-ms', Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms'
  2: move the file: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\2c6a5f154883cf0127320000380ccc0e.$$_speech_engines_sr_en-us_3201cbb7cd315cd0.cdf-ms', Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\$$_speech_engines_sr_en-us_3201cbb7cd315cd0.cdf-ms'
  3: move the file: Source = [l:254{127}]"\SystemRoot\WinSxS\Temp\PendingRenames\3c915f154883cf0128320000380ccc0e.$$_speech_engines_lexicon_en-us_bd71d54bf658e12b.cdf-ms', Destination = [l:166{83}]"\SystemRoot\WinSxS\FileMaps\$$_speech_engines_lexicon_en-us_bd71d54bf658e12b.cdf-ms'
  "4: hard link file: Source = [l:260 {130}] ' \SystemRoot\WinSxS\x86_microsoft-windows-s... chrecognizerenu.ale_31bf3856ad364e35_6.0.6000.16386_en-us_cbfb04a3abf30016\af031033.am', Destination = [l:100 {50}] '------? \C:\Windows\Speech\Engines\SR\en-US\af031033.am ".
  5: create file: file = [l:228{114}]"\SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll', attributes = 00000080
  6: move the file: Source = [l:164{82}]"\SystemRoot\WinSxS\Temp\PendingRenames\3c6c7a154883cf0129320000380ccc0e.newdev.dll', Destination = [l:228{114}]"\SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll'
  7: move the file: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\1c09bc154883cf012a320000380ccc0e.$$_system32_21f9a9c4a2f8b514.cdf-ms', Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms'
  8: hard link file: Source = [l:228 {114}] \SystemRoot\WinSxS\amd64_microsoft-windows-«
  2014-06-08 14:33:04, newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll CSI Info", Destination = [l:68 {34}] '------? \C:\Windows\System32\newdev.dll ".
  9: move the file: Source = [l:220{110}]"\SystemRoot\WinSxS\Temp\PendingRenames\fccae2154883cf012b320000380ccc0e.$$_performance_02bd33cc045df684.cdf-ms', Destination = [l:132{66}]"\SystemRoot\WinSxS\FileMaps\$$_performance_02bd33cc045df684.cdf-ms'
  10: move the file: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\4cffe5154883cf012c320000380ccc0e.$$_performance_winsat_ac47b36afb2fa68e.cdf-ms', Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_performance_winsat_ac47b36afb2fa68e.cdf-ms'
  11: move the file: Source = [l:254{127}]"\SystemRoot\WinSxS\Temp\PendingRenames\4c70e8154883cf012d320000380ccc0e.$$_performance_winsat_datastore_34fe222e5de27d61.cdf-ms', Destination = [l:166{83}]"\SystemRoot\WinSxS\FileMaps\$$_performance_winsat_datastore_34fe222e5de27d61.cdf-ms'

  Hello

  We look also at the bottom line in the journal of the SFC, not just specific entries along the way.

  He would often have similar entries, but the line of low said unable to fix or repaired successfully.

  _______________________________________

  • Once the process is complete, you may receive one of the following messages:
  • Windows resource protection did not find any breach of integrity.

    This means that you have not all missing or damaged system files.

  • Windows resource protection could not perform the requested operation.

    To resolve this issue, perform the analysis in safe mode System File Checker

    (http://windows.microsoft.com/en-in/windows/start-computer-safe-mode)

    and make sure that the files PendingDeletes and PendingRenames exist under %WinDir% \WinSxS\Temp.

  • Windows resource protection finds files corrupted and managed to fix it. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To display detailed information on the analysis of system files and restore, go to the display of the details of the System File Checker process.

  • Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To repair the corrupted files manually, see the details of the System File Checker process to find the damaged file, and then manually replace the corrupted file with a good copy of the file.

  If the message failed to fix some files and they are not the settings.ini errors (which can be ignored), you may need to perform a repair upgrade Installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ________________________________________

  Is to install Service Pack information:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon