My laptop loses its STARTUP information after it was closed during the night

Similar Questions

• Unable to power the computer on after that he was arrested during the night

  I just bought a new desktop computer Compac Persario.  I plugged it in to a surge protector and night I stopped him.  Last night, I stopped it as usual, and when I got up this morning, it lights up.  The power switch on the computer does nothing.  Nothing lights up and there is no sound from the cooling fan in the back.  All other plugged into the surge protector works, including speakers and the monitor.  If I unplug the power cord and plug back in and press the power button it turns immediately. I get a bad cord?  I had several HP computers and never had this problem.

  Hello

  Well, so far it seems to work ok now. Thank you for your help.

• I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

  I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Date system resets to 2002 after a stop during the night

  I have a Dell Dimension 4550 with XP operating system purchased in 2002. Computer work fine except after having turned it off during the night resets date and time system in 2002. After resetting in the configuration screen, it will keep the date until I stop from one day to the next one up to 2002. The error message only in the file is The Core Services service AG could not start due to the following error. The system does not find the specified path, how can I fix this problem

  When the system date and time are incorrect, then is a good indication that the battery on the motherboard needs to be replaced.

  the battery from the motherboard is also known under the name of the cmos battery and the bios battery.

  There are instructions on the net how to replace.

  most of the time its pretty simple to replace and the battery can be purchased where they sell watch batteries.

  You can remove the battery and get the model number or search for it in the manual of your computer or your manual online computers at its place of origin.

• Mac Air drains almost zero during the night when the laptop is closed.

  In the morning a few last that I was wake up an empty battery and I were not able to find a reason why. For example, last night, I have to close to 33% and earlier this morning it is 2%. My laptop used may use one/zero to 100 during the night, so I don't know what it is.

  The laptop isn't a deal and is closing completely. During the closure, it is either not sleep or something it is waking up. I looked at the activity monitor and nothing takes too much energy (but something could stay while it is supposed to sleep, but I don't know if there is a way to check that).

  I'll leave it open tonight and just push sleep in the menu apple tonight and see how it works. Even if it works, I wish I could just shut up because this is supposed to be able to do.

  Also, I recently downloaded Skype plugin and it's, it's the only change I made in the time this problem started, which may have something to do with it.

  MacAir 11', at the beginning of 2014

  El Capitan 10.11.4

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

  If this does not help, the backup computer and reinstall OS X from recovery.

  https://support.Apple.com/en-us/HT204904

• After Effects keeps crashing during the RAM Preview? [Sound problem]

  Hey, personal Adobe! Adobe After Effects worked well during the first week! But about 3 days ago I discovered a major problem. Whenever I have add all the sound/music files in the application and click the RAM Preview, Adobe After Effect crashes. It was surprising to me because it never happened to me before. But here's the thing, if I don't add any audio files in my project and click RAM Preview, it does not crash. Any ideas on how to solve this problem?

  Thanks again!

  You should consider updating your OS and your AE.

  Apple fixed some critical bugs in that related to EI 10.10.5, so I'll try that first.

  So, if you don't mind the new cool blue colors, you should also consider updating AE - at least to the last version of CC 2014. There was a lot of bug fixes and new features added.

• 2000-2d11DX HP: laptop loses connectivity wi - fi after hibernation/standby

  My laptop loses wireless connectivity once it goes into hibernation mode or "standby mode". I have to restart the computer for the laptop to resume the wi - fi signal. This does not happen with other laptops I have.

  What is the solution?

  Thank you

  pilloo

  Hello

  Please try

  (a) right click Windows (ie the Start button).
  (b) Select Device Manager,
  (c) expand network adapters,
  (d) the device right click Wireless,
  (e) click Properties.
  (f) to select the power management tab,
  (g) uncheck the first option,
  (h) click OK.

  Kind regards.

• How can I fix my iphone 6 more after it was bricked by the retro bug 1970?

  My phone was bricked today after that I was had by a facebook message claiming to have an option of retro to celebrate 10 years of apple products... so basically indicating that apple bought this hack... tried, turning her date back to 1970 and restart and my phone was stuck on the home screen for hours getting very hot... Google did not of miracle and most people advice has been to take it to an apple store to replace because it is a bug in the system... someone has more useful information on the situation?

  Allow the battery to drain completely.

• After session.invalidate () server during the PPR, #2 exception

  Guy:
  
  I use JDEV + ADF 11 g in my project.
  
  I have a link "log out" on my page, the link action method we called logout())
  When I click on the logout link, the methods of "disconnection" is running correctly
  
  It's the method
  
  public String logout()) {}
  
  System.out.println ("logout entry");
  
  HttpSession session =.
  (HttpSession) FacesContext.getCurrentInstance () .getExternalContext () .getSession (false);
  
  If (session! = null) {}
  System.out.println ("invalidate Session");
  session. Invalidate();
  }
  
  session = ((HttpServletRequest) FacesContext.getCurrentInstance () .getExternalContext () .getRequest () .getSession (true);
  
  return to "log out";
  }
  
  
  After the execution of the method, I get this exception
  
  [exec] Current console: [oracle.iam.consoles.faces.backing.BackingObject@723c0b]
  [exec] 8 January 2009 13:39:25 oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator handleError
  [exec] GRAVE: Server during the PPR, #2 Exception
  [exec] javax.el.ELException: java.lang.NullPointerException
  [exec] to javax.el.BeanELResolver.getValue(BeanELResolver.java:266)
  [exec] to javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
  [exec] to com.sun.el.parser.AstValue.getValue(AstValue.java:118)
  [exec] to com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:192)
  [exec] to org.apache.taglibs.standard.tag.common.core.ForEachSupport.prepare(ForEachSupport.java:165)
  [exec] to javax.servlet.jsp.jstl.core.LoopTagSupport.doStartTag(LoopTagSupport.java:256)
  [exec] to jsp_servlet._pages.__self_jspx._jspx___tag107(__self_jspx.java:4840)
  [exec] to jsp_servlet._pages.__self_jspx._jspx___tag106(__self_jspx.java:4801)
  [exec] to jsp_servlet._pages.__self_jspx._jspx___tag105(__self_jspx.java:4755)
  [exec] to jsp_servlet._pages.__self_jspx._jspx___tag75(__self_jspx.java:3524)
  [exec] to jsp_servlet._pages.__self_jspx._jspx___tag6(__self_jspx.java:361)
  [exec] to jsp_servlet._pages.__self_jspx._jspService(__self_jspx.java:199)
  [exec] to weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  [exec] to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  [exec] to weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  [exec] to weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
  [exec] to weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  [exec] to weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:502)
  [exec] to weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
  [exec] to com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)
  [exec] to org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
  [exec] to org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
  [exec] to org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
  [exec] to org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$ OverrideDispatch.dispatch (FacesContextFactoryImpl.java:267)
  [exec] to com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:475)
  [exec] to com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:143)
  [exec] to javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
  [exec] to org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:188)
  [exec] to oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:650)
  [exec] to oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:233)
  [exec] to oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:193)
  [exec] to javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
  [exec] to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  [exec] to weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  [exec] to weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
  [exec] to weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  [exec] to weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  [exec] to oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
  [exec] to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:289)
  [exec] to oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
  [exec] to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:289)
  [exec] to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:249)
  [exec] to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:206)
  [exec] to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:149)
  [exec] to org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  [exec] to weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  [exec] to oracle.iam.platform.auth.web.ExceptionalRolesHandler.doFilter(ExceptionalRolesHandler.java:107)
  [exec] to weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  [exec] to oracle.iam.platform.auth.web.AuthenticationFilter.doFilter(AuthenticationFilter.java:90)
  [exec] to weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  [exec] to oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:162)
  [exec] to weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  [exec] to weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  [exec] to weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  [exec] to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3559)
  [exec] to weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  [exec] to weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  [exec] to weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2195)
  [exec] to weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2101)
  [exec] to weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
  [exec] to weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  [exec] to weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  [exec] Caused by: java.lang.NullPointerException
  [exec] to oracle.iam.consoles.faces.mvc.self.Model.getInlineForms(Model.java:273)
  [exec] at sun.reflect.GeneratedMethodAccessor354.invoke (unknown Source)
  [exec] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  [exec] to java.lang.reflect.Method.invoke(Method.java:597)
  [exec] to javax.el.BeanELResolver.getValue(BeanELResolver.java:261)
  [exec]... more than 61
  
  
  DO YOU HAVE AN IDEA WHAT THIS IS GOING ON?
  
  In addition, I was told that I have to do
  
  ADFContext.getCurrent () .removeScope (ADFContext.SESSION_SCOPE);
  
  just before, invalidate, I did it and still get the same exception.
  
  
  Did I miss something?
  
  Thank you
  
  Rafael.

  Hello

  you deleted the session already, it is not necessary to call

  ADFContext.getCurrent () .removeScope (ADFContext.SESSION_SCOPE);

  because its no longer exist.

  Try

  facesContext.getExternalContext().redirect(faces/someViewId);

  After the invalidation of the session

  Frank

• Laptop stuck closed during the restoration of the system

  Laptop is stuck during the system restore? If I turn off computer manually by pressing the power button / stop it will mess up computer?  How can I fix it? The display shows 'Shutting Down' he was slaughtered like that for 2 hours now. Help, please?

  It is likely mean restoration of the system has failed for any reason any and therefore find it difficult to restart because of this.

  You may want to wait for someone a little more expert than me but normally peak I power the laptop through the main switch off and restart it.  At the start of the computer laptop once again he can ask you to start windows normally or in safe mode and you can then happily that we restart the PC and the system of cancellation/restore again.

• Pavilion laptop g7 lists different information after the registration of the first

  Can someone help me understand why my notebook lists a different model and the serial number through automatic detection he did when I signed everything first a year + ago?  It is a Pavilion g7-1150us, but lists another model g7t-1100 CTO. I had the motherboard replaced and I have a feeling that may be why, but if that is the case.  Thanks for any help that anyone can provide.

  Hello

  The g7-1100 is a series of many models including g7t-1100 models which are machines CTO. From 1100 to 1199, we can see 100 models, and we also see 11xxaa where aa represents normally for a country, a region, such as tx, nr... Back to your question, basically, they are very close. As mentioned, the Board of Directors has been replaced and restful can put available compatible / Board on your machine. I would not concern on this matter unless the other components/parts were exchanged.

  Kind regards.

• Not informed of Format .ai owner during the Migration of the Dollar Club

  Consumers should clearly have been informed that transfers of Club Photo Dollar to Adobe Stock meant the loss of variety in the file format and would require the use of Adobe software products. I relied on the versatility of the CPD for many things, and this site may not meet the requirements, in comparison. The linework stock remains mainly .ai files? Are there plans to provide variety in the file format that the DPC users were accustomed to? What was the intention of Adobe? Its provisions are remarkably restrictive and very different from those of our supplier of old images. Some images are available as well as the AI, for example the line drawing format.

  In fact, you do not lose any variety of file formats. You actually win the Illustrator format. Everything you had access to a migrated to Adobe Stock. If you do not want the Illustrator files, uncheck the search tool vector and don't forget the Illustrations is checked if you still want the stuff of art line.

  When Adobe will integrate Dollar Stock Photo Images

• I use compaq c702tu laptop .winxp Setup displays "unknw < no found disk > disk during the partion.

  I use a computer compaq c702tu laptop. with celeron processor, 512 MB of ram

  recently I changed my cd / dvd rw. After that, I tried to install winxpby by selecting the dvd as option frist drive in the boot order

  "while the establishment performs and partation it did not show disk hard instead of he displayed" unknow disc found

  After that it is if we press any key restart process system and even continues. Please help me.

  --

  Kind regards

  The c700 series uses SATA hard drives and Windows XP will not see a SATA hard drive without help. You have to load the driver for a SATA hard drive with the installation disk XP in "slipstreaming" of the pilot in the disc or using a usb floppy drive. Windows Vista and 7 and 8 will work fine with SATA drives out of the box. Post back for more information or see here:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  Yours is one of the models of "moderate." Simply follow the instructions on the link, or by post if you need help. You can also go into the BIOS and disable native SATA so that the system detects the disc as an ordinary IDE drive. You may be losing 5-10% of the performance of the car like that, but it's possible although difficult to set it to the native SATA after installation of XP.

• Adobe Flash plug in error after I was invited to the Firefox update

  I was invited there's an update of Firefox that completed successfully. After the update, Firefox started to plant and the conclusion I came to is the FlashPlayer from Adobe.

  Hi imad1208,

  Have you looked at our Flash plugin troubleshooting section? There are a lot of useful information here that should help you get to the bottom of your question.

  Hope this helps!

• Everything on my laptop lost during the night. Seems to be like a new computer with none of my icons, folders, pictures, or whatever it is that I put on here. Don't know what happened! Help, please.

  All I can with certainty you know is that I work with this computer laptop 9 Feb and finished updating a blackberry phone while I arrived he began to countdown a restart down to the right and I just let it continue to countdown, as I have before installing updates could.  I sat down and closed the monitor.  No has nothing do with computer laptop lastnight, but turned on tonight and most of my icons were missing.  According to me, the wallpaper is different from the front and I got on the internet as usual without any problem.  When I got off the internet to work with pictures of my newborn (only child), the only icon I had on the desktop is Ebay.  Not as if I had everything set up.  I then went to images and he had only the file sample.  Having felt that I would be sick then tried to look for some other stuff that I had in the records and doesn't seem to be anything anywhere.  Please help if you can.  This laptop is a Dell Studio, which is less than 5 months old.  Please help before my wife kills me for all our photos backup not.

  Thanks much for the advice, but I found where some updates have not been filled and after several reboots and updates processing everything on my desk, changed again the way I got it.  In fact, I went to C: users and then myself, then all my documents, pictures, ets. was there, so I later found lastnight it wasn't lost, just moved for some reason any.  I then started to look to check the status of the updates pushed out and there are service packs that has not been installed, so I crossed my fingers and agreed to allow them to install and went to bed.  Now computer seems to be back to my settings.  But thank you very much for answering.  It was the first time that I've already posted a question b/c that I generally find the answers online, but it was getting the best of me.  Probably b/c of the thought of losing all my photos only Childs and thinking of how my wife would react.  Thank God it worked.  Thanks again.