Not prompted to enter the password for the wireless connection.

Similar Questions

• I can create a password for my wireless connection, but it still says that there is no guarantee. What should I do?

  I will create a password to my wireless connection, but he said still not guaranteed.  I'm doing something wrong?  I have windows 7 and use an ATT router.  I can't understand why I can't have a password, even if she gives me the opportunity to make a.

  There are safe areas normally two on a wireless router - one is the password to connect to the router and change its settings and the second is the Security (e.g. WPA2) wireless mode and the key.  This is the second (setting a mode of wireless security and the key) will change the label on your connection wireless "Unsecured."  You probably need to review instructions specific to your model of router in order to change the settings of the router.

• When prompted to enter my password for internet banking, page does not load and then link is broken and connection is lost.

  When I try to connect to the page it requires me to enter a password before entering the Web site. When the Web site attempts to load, the connection is lost and I need to enter again with the password again. I called the hotline of the Web site and they said that the system is in good health, on their side. Any suggestions on what could be the problem and how to fix it?

  Have you updated to Internet Explorer 9 since the last time it worked correctly? If so, restore Internet Explorer 8.

  http://Windows.Microsoft.com/en-GB/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

• Cannot change the password for my wireless connection

  The wireless router has changed the key and I need to change the key/password on my windows computer 7, but it is not letting me.

  Usually on other computers, you can right-click the connection wireless from the taskbar and it will give you options of 'Connect' and 'Properties' (and you can change it in the properties).  But on this computer, there is no 'Properties' option, simply connect.  How can I get the Properties tab?

  You use a third-party wireless instead of Windows Manager? If to check with the manufacturers support site or your user manual for assistance to change the properties of the wireless network.

  You could also, last spring, just remove the existing profile and then re-create it with the new encryption key.

• Windows xp will not recognize or list the wireless connection.

  Original title: we changed wireless routers and now windows xp will be same not recognize or the same list if wireless connection 3 computers in the House will be

  Under networkconnections the old wireless router, or the other is visible.   I tried toads new link also with no success

  Hello

  1. What is the brand and model of the computer?

  2. who is the provider of Internet (ISP) Service?

   

  Follow these methods.

  Method 1: How to fix wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

   

  Method 2: To create a wireless network, you can follow these steps.

  a. click Start, click run, type ncpa.cpland click OK.

  b. in the window network connections, right click on the wireless network connection icon and then click Properties.

  c. in the wireless network connection properties, click the wireless networks tab. If you do not see a wireless networks tab, your network card can not take over the automatic Wireless Configuration service.

  d. under preferred networks, click the Add button.

  e. in the network name (SSID) box, type the name of the access point, and select the parameters according to your network requirements. This setting will match the configuration of your router or access point. If you have a router or wireless access point, and then select Wireless Ad - hoc mode and use the same network name that matches other computers.

  f. click OK

  g. under available networks, click View wireless networks.

  h. in the wireless network connection dialog box, choose a network by clicking on its name and then click on connect.

  Reference: set up a wireless network

   

   

  For more information, see this article:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

• When I run the Satellite I have to enter a password for BIOS

  Hello

  When I start my computer I have to enter a password (BIOS password?).
  I did not have this password and do not know how to solve this problem.
  I am not able to enter the system BIOS to change the Passover. I can't just do nothing. Any suggestions?

  Concerning
  Raymond

  > I am not able to enter the system BIOS to change the Passover. I can't just do nothing. Any suggestions?
  Unknown BIOS password cannot be removed.
  In this case, the question using ASP

• How can I see the security network key / password for my wireless network (all I see is points and the characters of the show option does not work)

  I'm trying to find out what is the password for my internet connection.  I can see the properties of the network and the password appears as a series of points.  the "Show characters" checkbox does not work... is there anyway I can find what is the password?

  Hello

  If you don't remember the password registered for you wireless, you can always reset your router to the factory default settings.
  Unfortunately, we cannot help you recover files and features that are lost or forgotten passwords.
  For more information about the lost passwords, please see the following Knowledge Base Article:
  http://support.Microsoft.com/kb/189126

• I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work

  I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work

  The phone that you have just bought is not new. It is locked to its previous owner.

• Terminal to request access code specific app on my iMac OS 10.10 not able to enter the access code

  How to use app-specific code for an OS 10.10 application authentication

  Terminal to request access code specific app on my iMac OS 10.10 not able to enter the access code

  Charles Clark wrote:

  How to use app-specific code for an OS 10.10 application authentication

  You need to say more. Terminal usually wants your admin psswd.

  psswd in terminal will not resonate.

• Windows 7, not identified limited in the wireless network connectivity

  I have a Vostro 1720 laptop for about 1.5 years and up to a month before, its connected fine just internet Best Western (my place of work). All of a sudden it just stopped and started giving the message "limited connectivity". I tried many commands and procedures that have worked for others, nothing is. My final straw was to wipe completely and to upgrade my vista to Windows 7 (Home ed). Now my computer is running 7, but still the problem remains. I tried:

  1. Manually assign an Ip address
  2. Reset the Modem
  3. Disable the Ipv6 Protocol
  4. Flushing DNS
  5. running Internet explorer without modules
  6. Commands (netsh int ipv4/ipv6 reset reset.log) Winsock stack
  7. Stop and start the DHCP service
  8. Looking for the ##ip - list services – found nothing
  9. Looking for Hello in the list services – found nothing
  10. Uninstall and reinstall the drivers
  11. from the identified public/no network to private - changed back
  12. Save, and then change the reg edit {GUID} - does not, so I changed it back
  13. Wipe the hard drive and the installation of Win 7
  14. At off Norton Antivirus completely (removal tool)
  15. Running in mode without failure + network
  16. Turned off the firewall in windows 7 by default
  17. Allocating an address random MAC under Advanced properties in the wireless card driver
  18. Disable all connections except for the wireless connection

  Hi all

  I had the same problem and searched for 2 days for a reply.

  I'm under Intel Centrino Wireless n 1030 in Windows 7.

  I finally found an updated driver for the Centrino Wireless n 1030. It has been updated 5/2011 which was more recent than the version 12/2010 I had on my computer.

  http://www.driveridentifier.com/scan/download.php?item_id=51625129&ScanID=6BEF4EB662F14B20B13ACCD8D322B6A9&hardware_id=PCI%5CVEN_8086%26DEV_008A%26SUBSYS_53258086

  When you log on the site it says that! This driver is not designed for your computer!, but I downloaded and installed in any case.

  HE FIXED EVERYTHING!

  I hope this helps...

  Lindsay

• hp7410 does not keep the wireless connection

  hp7410 all-in-one does not keep the wireless connection. It requires to install a new driwer. so far, I have at least 16 versions of the driver. neither maintains the status of line long enough fo more than a few hours.

  Please provide the following information if anyone can help including:

  The printer model - done

  Detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Method - USB, LAN, Wireless cable connection? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -

• all-in-one 7510 loses the wireless connection

  We just bought a HP Photosmart 7510. She created fine with a wireless connection to our office for Vista 64-bit. After awhile, he loses the wireless connection. If I close the printer then turn on again, it resets the connection and works very well. I read that it can lose connection if it goes into sleep mode, and it seems that is what is happening. My question is, is there a way to keep the impression of loss of connection or enter the mode 'sleep'? Or do we have to put the printer only whenever we wanted to print, copy or scan? If so, the printer is adjustable to disable instead of switch mode 'sleep'?

  Already set to 'off '. I found this thread http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/7510-photosmart-printer-energy-mode/m-p/1230681/highlight/true#M33814 I tried this and so far it works and has not lost its connection.

• Re: Satellite L670 loses the wireless connection

  Hello

  I have a Satellite L670 - 1 H 1, a new laptop that runs Windows 7, with all the drivers and software uptodate, including the wireless card.

  I have a BT Home Hub 3 with an Edimax EW 7416APN v2 300 m range extender to help boost the signal in the kitchen area.

  The laptop works fine when I stay in the room where the reception centre. If I move in the kitchen the laptop will usually lose the wireless connection after a few minutes and I cannot get it back unless I turn the LAPTOP works and return to the Home Hub.

  I see no obvious reason to this problem. Two other laptop computers used in the home, more a smartphone stay connected with full signal in every corner of the House, at any time.

  I have to use the range extender, but is it possible that the laptop Toshiba just don't hear well with it?

  Any advice would be welcome.

  Thank you
  Canton

  Hello Canton

  As you know quality of connection WLAN depends on different factors is not easy to say why you have this problem, WLAN. I use Toshiba laptops for a long time now and I didn't notice in the past some serious question of WLAN.
  For example I'm 4 router with standard g and have very good signal even in the cellar too or out in the back yard.

  If possible, try to test the WLAN connection elsewhere. Maybe your friends have WLAN routers so you can test it.

  You have a new router or old?
  What WLAN standard do you use (b/g/n)?

• Satellite L505-13F - impossible to activate the wireless connection

  Hello, I have connectivity problems with my Satellite L505-13F.

  I can't turn on the wireless connection. I press Fn + F8 and nothing happens. The indicator at the bottom of the laptom turns on.

  I though this would be a problem with the drivers. I downloaded realtek wlan driver here [http://aps2.toshiba-tro.de/wlan/?page=downloads], but it has not installed correctly. Then I used the toshiba software installer, but yet again, nothing has changed. I have Windows 7 Home premium 64-bit.

  Device management, I have seen that I installed a wifi driver. (Realtek RTL8191SE Wirelless Lan...) So, what the problem is?

  Any suggestions?

  Hey,.

  Something happens if you press other keys FN or FN + F8 doesn't work only? Normally with this key combination you can enable/disable wireless network card.

  In addition, it would be interesting to know what happens if you are looking for WLAN networks. You see your WLAN router?

  If all the keys FN n t work, reinstall the package of added value and utility to Support Flash Cards. Otherwise, it could be another problem and you should reinstall the driver again and make sure the firewall isn't blocking the connection.

  See you soon

• Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

  + Sorry for my English is not my mother tongue. +

  Hello

  I expose my problem:

  I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

  Configuration of the laptop:

  * Windows 7 Ultimate 64-bit (with all updates installed).
  * All the updated drivers correctly.
  * With the latest version of the BIOS.

  Router:

  * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

  The router configuration:
  * WPA2-PSK AES.
  * 802.11n
  * Maximum output power.
  * Channel: 11 (not automatic, that this channel is relatively free).
  * Width of channel: 40 Mhz.
  * Maximum tx frequency: 300 Mbps.

  Other information:

  The wireless card drivers are correctly then updated (ver. 5.60.48.35).
  * The router has updated the firmware.
  * I tried all the settings of the wireless card.
  * Bluetooth off (without interference).
  * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

  Thanks in advance,
  Greetings.

  Post edited by: Xibalba

  Have you tested using different channels?
  Have you tested speed WIFI connected to another router?