not pulling OnChange event

Similar Questions

• not pulling - click event button position: fixed - 2.0 Playbook

  I have a fixed position "back" button in my application that triggers not when scrolling to the bottom of the screen.

  Here is the code for the button:

  Back
  
  

  When I scroll the screen to the top, the button triggers without problem. However, if the screen scrolls down at all, the button's click event will not occur.

  I've traced the events Web Inspector and a click event fires when I click the button. However, it does not actually draw the method that I've linked to the click event of the button. Once again, if I scroll the screen to the top, the button click fires very well.

  I must emphasize that the button is displayed correctly at all times. He remains in a fixed position of 5px to the right side of the screen, even when scrolling of the window down. If the button is visible at any time. It's just that when I scroll nothing happens if I click on the button.

  Looks like a bug with WebWorks. If anyone can confirm?

  Thank you

  Thanks for the suggestion ignites.

  I found that this was due to my own bug. It was a problem with z-index. I increased the z-index of the button, and it solved the problem. The button must have been in conflict with lowest elements of the page, but it was very well at the top of the page.

  Thank you

• PartialTrigger does not trigger the onChange event of a InputText.

  Hello
  
  I have a problem with partial triggers. I have 1 inputText and commandButton 1 as below:
  
  "< tr:inputText id = value =" #{MyBean.locationString "input1"} "partialTriggers =" * testButton * "onchange =" alert (1); " "/ >
  "< tr:commandButton id =" "* testButton *" action = "#{MyBean.testAction}" partialSubmit = "true" / >
  
  If I enter inputText and manually change something, it triggers the onChange event. But if I change it with PPR, it does not raise.
  
  How can I trigger inputText onchange event OR how can I invoke a javascript function after the end of partialSubmit?...
  
  Thank you.

  Hello

  How can I trigger the inputText onchange event

  Set true to autosubmit property and as soon as you exit the field the value is submitted

  OR how can I invoke a javascript function after the end of partialSubmit?...

  Using the Trinity, you can call JavaScript from a managed bean. But for this, the PPR request to access a bean

  Frank

• The execution of Javascript for the onchange event of Rich text editor field

  Hello

  I have a piece of javascripts that warns users when they try to move away from a page with unsaved changes (if they change all fields in a form). The code works for all types of fields except for rich text editors.

  I think that the reason might be (not 100% sure) which is the form element when users type in their changes is nested inside an iframe html document, and my jQuery onchange event trigger nested inside an html document changes.

  Dynamic measurements also do not work if you create a simple rich text box and write JavaScript codes in onchange events fire.

  Would be grateful if anyone can suggest a way to make my Rich Text Editor work fields onchange events.

  I use Apex 4.2.2 theme 26.

  The field is a Rich Text Editor to type CKEditor3, Toolbar = intermediate.

  Hello

  This might help

  Re: Counter of characters for a rich text editor.

  Kind regards
  Jari

• onchange event trigger to load data from Server

  I have following code to filter my second list from my list.

  It works when the user click on the drop down menu, since the event onchange trigger.

  I tried to load the data from the stored procedure, then the onchange event does not trigger when the user must update the data, and then see the entire list without filtering.

  I would like to know if it is possible to the onchange event of tripping when I insert data from a stored procedure,

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  < td > < select name = "Mylst" id = "Mylst" >

  < cfoutput query = "PSP" >

  < option value = "" #MySP.MyID # ""

  < cfif (isDefined "(form. MyID") AND form. MyID EQ MySP.MyID) > selected = "selected" < / cfif > > #MySP.MyName # < / option >

  < / cfoutput >

  < / select > < table >

  $("#Mylst").change (function)

  {$.ajax({)}

  type: 'GET ',.

  URL: ' Mycfc.cfc? method = GetMethod & MyParam ='+ jQuery("#MyPrelsty").val (),.

  data type: 'json ',.

  cache: false,

  success: function (data)

  {

  $('_#MySublst_option').remove ();

  $(données, fonction (i, obj) .each)

  {

  $("#MySublst").append (' < option value =' + ' "' + data [i] [0] + '"' +' > ' + data [i] [1] +)

  ("< / option >")

  });

  }

  });

  iccsi wrote:

  I would like to know if it is possible to the onchange event of tripping when I insert data from a stored procedure,

  Yes, it is of course possible. The environment in which the event takes place - the browser - is independent of the environment in which the data is loaded by the stored procedure - the ColdFusion server.

  Any problem that you are experiencing are probably those of JQuery. A similar question was answered Stackoverflow.

• Contradictory to the OnChange event?

  I have a javascript very simple function to change the value of a selection list based on the value of a list of different selection.
  

    function changeLength()
  
         {
                   index = document.getElementById("p2_prod").selectedIndex;
               var myTextField = document.getElementById("p2_prod").options[index].value;
  
               if (myTextField == "SAC") {
  
               document.getElementById("p2_total_length").value = "FL";
               }
              
  
       }

  I have the function to trigger an onChange event. However, the function seems not to be put to fire. Looking at the source, I noticed that the APEX has already set an event onChange on this field. The source is:
  

  <select name="p_t01" size="1"  onchange="location.href='f?p=102:2:1540396428473605::NO::P2_PROD:'+this.options[selectedIndex].value;" id="P2_PROD" onchange="changeLength();">

  How can I get these two onChange event to play nice together?
  
  Environment:
  Oracle XE
  WinXP
  Request Express 3.2.1.00.11

  Hello

  You can set the value in the URL, when you redirect

  Kind regards
  Jari

• How do I reference col tabular report in the onChange event of Txtfield

  Hello
  
  I need to have the event Onchange on Textfield.
  Whenever I change the text field value, the new value must go to a particular column in my
  tabular report.
  
  In the onchange event, so I have to pass the column tabular report (target field) as well as the textfield value (this.value)
  something like this:
  onChange = "javascript:changeColVal(this,rowid); »
  
  I have no idea how to spend the line id / individual column of the tabular report to textfield.
  
  Pointers on this would be a great help.
  
  Thank you
  Vijay

  Hi Vijay,

  OK - now have a glance.

  I changed the javascript code to check the cell with "Comments" as long as the value of the headers instead of 'Notes' we can get to the field notes hidden by the name attribute instead.

  Andy

• Added system ok but as far as I know, powerUp listener not pulling

  Hey. My application, in main(), adds a listening on starting system to cold (battery replaced), without error. However, the powerUp method below does not pull when I switch off my BB and sur-Appuyez the red end button for 5 sec and press once again (a warm start). How do you get powerUp to call? Code is below.

  MSL MySystemListener = new MySystemListener();
  MonthlySpend ms = new MonthlySpend();
  ms.addSystemListener (msl);

  private static class MySystemListener implements SystemListener
  {
  public void batteryStatusChange(int a) {}
  public void batteryGood() {}
  public void batteryLow() {}
  public void powerOff() {}
         
  public void powerUp() {}

  PerformAnyReset... schedule, calls so if not reset, don't program twice
  If (!.) PerformAnyResetWhichWasScheduledWhilePhoneWasSwitchedOff())
  ScheduleTotalResetForStartDateOfNextBillingCycle();
                                 
  SetIconAndTitle();
  ScheduleIconUpdateOvernight();
          
          
  String logMessage = "Warm" started
  If (EventLogger.logEvent (0x4c9d3452d87922f2L, logMessage.getBytes (), EventLogger.ALWAYS_LOG)) {}
  System.out.println ("Log successful!");
  }

  Hey - fixed. The application itself must be a SystemListener, not another class

  J

• link to the onChange event?

  I have a text field whose value can be modified programmatically by a javascript function

  I have a second field, bound to a cfc, pass the value of the first field to the cfc function

  This works, but only onBlur and onKeyup, how can I do this work based on the onChange event of raw material, i.e. when my JavaScript function changes the value in the first field, pass this value to the bound field and get the result? something like onChange = ColdFusion.secondField.refresh

  < cfform >

  < cfinput type = "text" name = "firstField" value = "fromJavaScriptFunc" >

  < cfinput type = "text" name = "secondField" bind = "SWC:myCFC.myFunc({firstField@blur})" bindOnLoad = "true" > "

  < / cfform >

  Thank you

  I think I got it, but it's sort of undocumented. my js function, I add this call at the end:

  ColdFusion.bindHandlerCache ['mySecondFieldID'] .call ();

• Problem with the onChange event

  Hello
  
  I am currently facing a problem with the onChange event when you use a datefield entry type.
  for example
  < cfinput type = "datefield" name = "date_txt" width = "175" mask = onFocus = "date_txt.disabledDays" dd/mm/yyyy"= [0.6]; "tabindex ="1"style =" "text-align: left" onChange = "checkDate (); ">
  
  And then, when I alert the selected date in checkDate function, I still get the old figure.
  for example
  public function checkDate (): Void {}
  Alert ("Date:" + date_txt.text);
  }
  
  For example if the date displayed is 05/05/2008 and I select another day (05/02/2008), then when the alert box appears, it still shows 2008-05-05.
  
  Any idea on how to solve this problem?
  
  Is this a bug with Flash Forms?
  
  Thank you and best regards,
  Yogesh Mahadnac

  I suppose that the function onchange occurs before the value of text is actually defined.
  Use the correct value
  Alert ("Date:" + date_txt.selectedDate);

  Ken

• volumeChange not pulled (MediaController)

  Hello
  
  I can not get volumeChange event fired on MediaController component; the volume is changed when the user moves the volume control, but the event does not fire. (Click event works as expected.)
  
  This is the file with the example.
  
  I googled for problem reports, but have not found, so I guess that's not a bug.
  Could someone help please? (The code is below, but I don't think that the error is that it contains).
  --

  My thanks go to Paul Ferrie.

  The name of the event is not "volumeChange" ( as described here) but rather simply 'volume' as described yet-i-don't-know-what.

• Method Get JDev 10.1.3.3.0, not pulling on the second visit

  Hello
  
  I'm having a problem with the accessor get and setters of my grain of support not pulling on the second visit to the page. When I visit the page for the first time, it works very well and the calculations are complete but when I revisit the page it doesn't work. Any help would be great. I have setup a custom but phaselistener do not think that is the problem as I tried it on a test page with only field based on him and it works very well.
  
  Thank you.

  "Revisit" a page can mean many things. Are you you speak by using the back button on your browser, or by using the in-application links to access the page? In 10.1.3 ADF is not really compatible back-button navigation. I've seen full button back-support for 10.1.3 House, but it is not easy (basically, it's doing things fantasies with frames, makuing sure that back button always navigates actually a hidden frame and Javascript in this context which submits to having again the previous page request). It's one of these things "I hope 11g coming out soon.

  If you actually go back to the page by using the links on the page, it's a little more surpsising. It is certainly the getter which is not put to fire, and not, say, code in the constructor of the Get accessor is dependent on? If the latter, make sure your scope of bean; It must be set to 'request', or you will be reusing an old bean rather than make a new. Otherwise, I'm at a bit of a loss.

• Simple question - how to make an onchange event occur in a select list

  Simple question - how to make an onchange event occur in a list to start a process of selection?
  Thank you

  (1) with the ApEx selection about to submit list.
  You create a PL/SQL process after Submit. -> Request for conditional Type = Expression1. -> Expression1 is the name of your selection list. Treat the Source - > procedure you like. For example based on your select list value you add rows in different tables.
  (2) Javascript this example will change a system parameter value when changed

• Event invoked not pulling

  I am currently using the WebWorks 2.0.0.71 SDK with the 10.2.1.1925 simulator and my physical device and I have some difficulty.

  I tried for hours detect the event invoked using document.addEventListener ('called', onInvoked); but I can't seem to detect it.

  The app normally opens very well and can also be invoked (as a map) as expected, but I don't get any invoked event (the rest of the code works fine).

  I even tried to directly copy the example of http://developer.blackberry.com/html5/apis/v2_0/blackberry.invoked.html but no luck.

  Any help would be greatly appreciated!

  Additional checks showed that the right solution is:

  document.addEventListener ('called', this.onInvoked, false);
  onInvoked: {function (onInvokedInfo)}

  The underlined part was not necessary (I didn't not test properly variations to achieve this) and the patch removed (onInvokedInfo) of the function addEventListener call.

• Not pulling HTML onClick event!

  Hey guys,.

  I use the onClick event that is not shot. I tested Simulator v4.5. How to make clickable HTML buttons without using the onClick event?

  Hi Vinayak,

  Can you confirm if JavaScript is enabled? Selection 'Options' in the menu of the browser and make sure the "Enable JavaScript" box is checked.

  Also, how you set your HTML button, as a element or?  By combining the onClick event to a button HTML, its best to set the key asas long as this does not cause the form to submit.

  Sincerely,

  Adam