not recognized after installing update

npr temp.PNG

Updated due to this message on Firefox. Removed history and cookies; restarted. Always get message. Win 10.

Thank you.

Please check if Flash Player is enabled.  See Activate the Flash Player for Firefox

Is it a 64 bit OS?

Tags: Flash Player

Similar Questions

  • Satellite A500 - TV tuner not recognized after installing updates

    Recently, I ran a few updates (Windows 7) for Satellite A500 (PSARA9A). It has a built-in tuner & it worked fine until updated. Now when I go to watch television or check it comes up with "No tuner available to meet the demand for courses".

    I tried to install the new driver, but I can't tell if he does something. Device Manager me indicates that the latest drivers are installed, but it shows the yellow exclamation point.

    Can anyone suggest anything here?

    In my opinion you should try to roll back the OS to an earlier time using System Restore tool.
    This should be a quick and temporary solution.
    After this check the functionality. I put t know what settings do you use for Win updates installation but I suggest you turn off the automatic option.

    Later when you will be informed about available updates checking a little list and if a driver update is listed here don t install. Use the original Toshiba drivers only.

  • Webcam and DVD player get not recognized after installing an update

    Original title: Why webcam stoped working after vista update? __
    Cam web and CD/DVD of my hp 9623 cl stoped working after the update to Vista. The two are unavailable in Device Manager too.

    need help to restore it. Thank you

    Hello

    1. may I know what update has been installed?
    2. did you restart your computer after installing the update?

    Run Fixit diagnostic tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • USB printer not recognized after Windows update

    OT: usb device not recognized

    After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

    Hello grasshopper.

    This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

    a. Click Start, type system restore in the search box and then in the list click on the system restore program.

    b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

    d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

    e. click Finish.

    You can see the following article for reference:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    You can also try driver restore on the computer and check if it helps.

    To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

    a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

    b. right click on the device for which the previous version of the driver is desired and then click Properties.

    c. click the tab drivers.

    d. click on Roll Back Driver.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Satellite L30-101 WLan card not recognized after installing XP

    Hey

    I just finished my Vista to XP downgrade L30-101 and installed all the drivers I found were those that I needed, but now it's not recognizing the wireless and I do not know how to fix this...

    The wireless icon is not in the Internet Connections folder or anywhere else, but I have already downloaded a modem one try it and a network card, a...

    He had an Atheros card on it too I think, I downloaded the driver for this as well...

    Hello!

    Do you have the yellow marks or unknown devices in Device Manager?

    In your case I'd do an update of the BIOS if you n t have the most recent version, and Yes, you have an Atheros WLAN card, so you need Atheros driver.

    Please check if the switch wireless on the laptop is on.

    Good bye

  • PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

    Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

    Hello

    I suggest you borrow the CD of windows vista to your friends

    Method 1:

    Step 1:

    I suggest you check in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    If you be able to start your computer in safe mode, I'd say make clean boot and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to see link and check.

    Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

    http://support.Microsoft.com/kb/2674065

  • Vista will not boot after installed updates

    After installation of .net Framework 3.5 Service Pack 1 for .net Framework Assistant updates. 1.0x86 (KB963707) and Windows Vista (KB968389) to my Dell XPS M1330 laptop, my computer did an automatic stop down. I couldn't restart my computer correctly after this {2nd time this has happened}. I restarted my time 1st comp by selecting the command prompt and the 2nd time by catering to last known position. I did all as usual by pressing F8, F12, F2, diagnostic test, memory test and a little more. Right now I'm running, but I'm going to be scared to do another update when the time comes. Can someone help me please on this issue. Many thanks in advance, Ron

    Hello

    1. keep good backups of your data using redundant methods.

    ------------------------------------------------------

    2. it is very possible that updates do not install correctly are the symptoms of the real problems
    and not the real cause of their.

    ------------------------------------------------------

    3 set updates download but you can install them - and you can install them one at a time if necessary.

    Control Panel - Windows Updates - left settings.

    and run it to restore updates

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    ------------------------------------------------------

    4 do these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ------------------------------------------------------

    5. record how to remove updates if necessary:

    Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

    Or

    Remove an update
    http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

    Or

    The problems with the removal of updates
    http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
    Or

    How to uninstall updates in Windows Vista
    http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

    Disable or hide optional updates on Windows Vista
    http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

    ------------------------------------------------------------

    If necessary, you can get free reports of incidents.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Features of HDX18t not recognized after installing Win7

    After a clean install of Windows 7 Ultimate, Device Manager reports three devices Base system without driver and two unknown devices (ACPI\ENE0100 * ENE0100) and (USB\VID_138A & PID_0001 & REV_0372 USB\VID_138A & PID_0001).

    As far as I know, all the USB ports work correctly, as does everything that I tested (some ports that I don't use).  I assume that ACPI has something to do with power management, but I can't find any other indications of power problems - well that I had to replace the battery not long before installing Win7 because it was not supported.

    What are these five devices, and how can I find the drivers - especially for the three who seem not to identify?

    I tried to use the tool "automatically find your products and solutions ', but it does not load in the latest version of SeaMonkey, and with IE9, it seems to start but shows no progress after more than an hour.

    Any suggestions?

    Hello:

    This is the base system device.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76497-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

    The first unknown device that you posted that needs of pilots is that one.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-66577-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

    The second unknown device what you have listed is this one.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-67648-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

    Paul

  • External hard drive is not recognized after Windows Update

    Original title: XP Pro wants to install driver for external hard drive that is Plug-and-Play

    I think that using Windows Update can cause problems (unintentinally or not) for users of Windows XP.

    In a series of accidents with an old computer and reinstall the XP Pro operating system, I discovered that MS Money installing only if it was made before the Windows updates.  (planned obsolescense?) The issue has to do with the removal of the registry AUTORUN file. INF for some new and improved files through Windows Update.  Before the updates, the file exists, and I could install MS money.  After updates, AUTORUN. Missing INF file of the registry.

    Now, I encountered a new problem, and I think that it is also a result of Windows Update.  My external hard drive to IDE, that worked perfectly before on this computer (newer), is no longer recognized and want to reinstall the driver.

    The problem is that it is a Plug-and-Play device, and no driver was needed before updates.  I read somewhere in my many attempts to find a solution that the MS Plug and Play system was replaced by a universal version of this feature (UPNP?)

    It's on a more recent, computer replacement, which came not with a copy of the Windows XP Pro operating system, and I can't just reformat the hard drive and start all over again.

    Someone else has encountered this, and if so, have you found a solution?

    Double Post suite-

    Where is my external hard drive?

    I'm under XP Pro on a Dell Optiplex PC with all the current Windows updates (SP3. Net4, etc..) and last month, I added a USB IDE hard drive. the hard disk enclosure is MASSCOOL, and I used a 250 GB Seagate Barracuda7800. The car worked perfectly until this week. I had the Windows Update critical update automaticlly value and security updates.

    The hard drive has disappeared from "my computer." I tried to plug and unplug in different USB ports, restarted the computer, but continues to receive the "new hardware detected by saying me that new hardware has been detected and that I need to install the necessary driver.

    The problem is that Seagate does not provide any driver for this drive, because it is supposed to be (and was so far) recognized by the Plug-and-Play of Windows XP software. The hard drive enclosure came with a mini CD, but this contains software to use the unit as a back-up, not for storage.

    I can't understand that this change suddenly to believe that something in the Windows updates that have been installed recently changed the command structure, registry files or the drivers themselves.

    I know this is possible, because I've seen what's happened to any program that relied on self. INF file that was originally part of XP. This resulted in programs like Microsoft Money and older versions of MS Office, not being able to be installed by those of us who are not 'technically lit.

    I'm here in left field, or other people have had similar problems? And is anyone know how to solve this dilemma?

    Hello Ron Caley.

    Perform the steps in the link and check.

    Advanced troubleshooting tips for General USB for Windows XP problems

    Hope this information helps.

  • Tecra S3: SATA hard drive not recognized after XP updates

    Windows has recently completed an automatic update on a Tecra S3 equipped with a 60 GB HARD drive SATA.
    After the reboot required for updaates windows generates a BSOD.

    I've traced the error and found that the system can not find the hard drive.
    Even when I use the XP cd and restore/repair console without a hard drive is located.

    When I check the BIOS hard drive is there.
    I removed the hard drive and used an external case and determined that the hard drive works fine.

    Hello

    Tecra S3 supports RAID.
    In order to install Win XP RAID driver is needed!

    The RAID driver can be found on the European driver Toshiba page.
    It s a v 1.01.0005 for Win XP.

    You can include the RAID driver using nLite. This free tool allows you to include the RAID driver in the Win XP disc.
    Google for nLite for more details.

    Welcome them

  • Satellite L735 - wireless network card is not recognized after installing OS own

    Dear Sir.

    I have the computer laptop satellite L735-M14X part #: PSK0CE-04X01RAR, SERIAL No.: YB321818W
    My laptop was windows Home premium 64-bit Arabic and very slow and I wanted ultimate English so I did a format and installed win 7 ultimate 64-bit, and after I installed all the drivers shown in the attached picture 4

    but wifi still doesn't work do not for a wireless internet connection! (I updated the bios from 1.8 to 2.2 and installed the package of value added and activated the wireless but not active)

    so I noticed that there are 2 drivers to lack as in the attached photo 1 & 3 picture and I have not found the required software for them.

    also when I was installing the driver 'widipl-20110323155916', is a problem then please check the image2

    Please find a good solution without recovery!

    Waiting for your help earlier and support

    Photo 1
    [http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/1/1.png]

    Photo 2
    http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/2/2.PNG

    Photo 3
    http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/3/3.PNG

    Photo 4
    http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/4/4.PNG

    According to the specifications of the laptop your laptop doesn't have Intel WLAN card. It has Atheros WLAN card inside, please try to install the driver gate Atheros WLAN Toshiba - http://aps2.toshiba-tro.de/wlan/

    Please post comments.

  • OfficeJet 7500: HP L7500 Scanner not recognized after last update Win 10

    I have this same problem on all my PC from the most recent Win 10 update 3 March 2016.  All the pc to connect to the printer via a wireless connection with the printer connected to the router using one if the router is NIC ports.  Just to be clear, I just downloaded the latest drivers that you show here for this printer.  If I use the drivers them or earlier, I can't the PARSER must be recognized.  I tried uninstalling and reinstalling the drivers more recent and even tried the original CD (which are Vista drivers).  All to nothing does not.  When I try to scan I get this msg on the screen: "the analysis cannot because another program or computer using the networked HP imaging device.  Try again later. "The error information extened is:"8 (0.18,-2147467259)"[whatever that means]!.

    I also tried physician Scan (latest version).  He concludes by saying: he can not solve the problem.  I did the food printer disonnect, etc. in full agreement with the instructions here.  The PRINTER works fine and it appears in the network installation.  It's the Scanner is not working.  And it worked until the most recent upgrade to win 10.

    I use Kaspersky Antivirus and it is ON and operational during the installation.  What can we do to get the scanner to work? integrated application of win 10 Scan Lele reports that it cannot find the scanner, so it's help.  Until this last Win 10 update, method also used to work.

    Hi @SoCalGuy,

    Glad to hear that you were able to find a way to solve the problem you!

    Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

  • CD player not recognized after installing the second hard drive

    My OptiPlex 755 Windows 7 with a ran fine until I installed a second hard drive.  Now only the hard drives are recognized.  I have cd players connected to SATA 2 and 3 a the SATA drives 0 and 1.

    The 755 a 0 and 1 and then 2-3 THEN esata.

    Other chipsets have 0 1 2 3 4 5 and raid 5 capacity.

    These options appear as
    SATA 3
    for the mini tower,.
    SATA
    0
    through
    SATA 2
    for the
    Desktop
    for

    The blue connector is drive 0

    The 2nd Black, this is the dvd's.

    There is no car setting just the port enabled or disabled.

    2nd HARD DRIVE GOES ON THE WHITE CONNECTOR

    The 2nd CD GOES ON THE CONNECTOR FOLLOWING

    DRIVE CABLE IS BLUE AND CD CABLES ARE ORANGE.

  • Vista SP1 seems to load but is not listed on installed updates or recognized by other programs

    I get a problem with Vista.  I had to restore to factory settings and loaded the more updated with the exception of SP1.  When I try to load it, I quickly get a message that the installation was successful, but SP1 is not listed on my installed updates and any application that needs it asks me to load it.  I tried MS Fix It nothing works.  I have therefore to be installed, but it is not recognized as installed, or there is not installation despite the message from Windows Update to a successful installation.  Any ideas on how to fix?

    Thank you very much!

    I get a problem with Vista.  I had to restore to factory settings and loaded the more updated with the exception of SP1.  When I try to load it, I quickly get a message that the installation was successful, but SP1 is not listed on my installed updates and any application that needs it asks me to load it.  I tried MS Fix It nothing works.  I have therefore to be installed, but it is not recognized as installed, or there is not installation despite the message from Windows Update to a successful installation.  Any ideas on how to fix?

    Thank you very much!

    First - make sure you have the latest drivers for hardware device downloaded and installed on your computer manufacturer's website.

    Then...

    Download and SAVE the SP1 for your computer somewhere, you can find it after a reboot.

    Also download and SAVE the SP2 suitable for your computer somewhere, you can find it after a reboot.

    Reset.

    Right-click on the SP1 download and choose Run as administrator (if logged in as an administrator.)  Follow the instructions until it concludes and restart.  Open a session.  Wait a few minutes.  Reboot again.

    Right-click on the SP2 download and choose Run as administrator (if logged in as an administrator.) Follow the instructions until it concludes and restart. Open a session. Wait a few minutes. Reboot again.

    Then use this:
    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    find out if you have installed SP2.

  • machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

    Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

    I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

    Check the connection of the cable! PXE - MOF:
    exit Intel PXE ROM.

    Operating system not found
    Backup of disks were damaged
    starts from disc downloaded ubuntu, so no problem with a hard drive.
    Cannot access then unable to return to the last good configuration safe mode?
    where can I download vista to reinstall?

    Hello

    Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

    They should do this for a small fee.

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Read the responses in these links on the false boot order and network devices.

    http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

    http://www.computerhope.com/issues/ch000706.htm

    See you soon.

Maybe you are looking for