Satellite A500 - TV tuner not recognized after installing updates

Similar Questions

• Satellite A500 - 18Q - battery not detected after installing Windows

  I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

  Windows is not detected battery. What should I install to the Windows recordnize the battery?

  Hi marnin,.

  Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

  Normally for the battery you n t need an additional driver. He will be recognized automatically.

  Can you charge the battery when the laptop is turned off?

• not recognized after installing update

  

  Updated due to this message on Firefox. Removed history and cookies; restarted. Always get message. Win 10.

  Thank you.

  Please check if Flash Player is enabled.  See Activate the Flash Player for Firefox

  Is it a 64 bit OS?

• Satellite L30-101 WLan card not recognized after installing XP

  Hey

  I just finished my Vista to XP downgrade L30-101 and installed all the drivers I found were those that I needed, but now it's not recognizing the wireless and I do not know how to fix this...

  The wireless icon is not in the Internet Connections folder or anywhere else, but I have already downloaded a modem one try it and a network card, a...

  He had an Atheros card on it too I think, I downloaded the driver for this as well...

  Hello!

  Do you have the yellow marks or unknown devices in Device Manager?

  In your case I'd do an update of the BIOS if you n t have the most recent version, and Yes, you have an Atheros WLAN card, so you need Atheros driver.

  Please check if the switch wireless on the laptop is on.

  Good bye

• Satellite A500-02 s - not explore after log in

  Hey guys,.

  I have a Satellite A500-02 running on Windows 7 Home Premium.

  So I got a virus today and here is what happened:

  1. on the taskbar, I normally libraries pinned there, this icon became a white Notepad and when I clicked on it, he said he was no longer there and asked if I wanted to remove. I clicked Yes.

  2 many unsuccessful attempts to pin it back. When I right click the icon of libraries in the taskbar, the only option that appears is 'Close this window', whereas before it would have a jumplist and some options more that "this PIN to the taskbar"

  3. I looked on line to see if I could find a way to fix and found similar solutions where I had to make sure that IsShortcut.lnk was still in the registry, she was. So no use.

  4 restarted my computer and after typing my pw to connect, a blank white screen showed. I freaked out at first, but then google this on another computer and found that explore does not work automatically.

  5. the Task Manager open, tried to run explorer.exe, BUT HE wasn't THERE. (by that I mean C:/Windows/explorer.exe

  6. Nevertheless, I found another link "Explorer" in another folder to run and was able to begin to explore this way.

  7. Since then, I have used Norton 360 to make a complete analysis of the system, Malbyteware to another complete analysis of the system (which took some virus in the registry, etc.), but after a reboot, all I get is just a white screen.

  8 tried a system restore to a point in there a week and nothing. Still a white screen after connection and I still have to run explore via the Task Manager (and is either C:/Windows)

  9. Another symptom I have is that when I load this different version of Explorer (from a folder called winsxs) my volume adjust button, which was always there at the bottom right, does not appear. Also, when I go to the settings and try and make sure that it seems that explore hangs and I have to re - relaunch of the Task Manager.

  Any help would be greatly appreciated!

  I think you're at a time where you need to do a repair installation. There is here a guide [how to do a repair of trouble Windows 7 install | http://www.sevenforums.com/tutorials/3413-repair-install.html]

• Re: Satellite A500 - keyboard is not recognized

  Hello

  I have a Satellite A500 and I can't get the computer to recognize the keystrokes when I type my password to get into the computer. This is why I can't on the computer at all. The cursor flashes in the password box and when I click it with the mouse also recognizes this function but I can't go any further.
  This has happened a number of times now and it's been really annoying

  Does anyone have a solution for this please? Is it to do with tapping? FN + F9 don't working.

  Australian salvation,

  You mean the password for your Windows user account? Normally, if you start the computer, you can begin with password enter because the cursor blinks already in the password box.

  Can you enter the password if you connect an external keyboard? If so, this would mean that the internal keyboard is defective. In addition, it would be interesting to know if you can access the BIOS by pressing F2 on the internal keyboard. So, you can check if the problem comes from related software or not.

  By the way: FN + F9 can only toggle the touchpad, but not the keyboard.

• Satellite A500 - USB devices not recognized

  I have a new Satellite A500 and it now will not 'see' one of the connected devices (Modem 3 G, an iPhone). I checked on Device Manager and it is showing as active USB ports and works correctly and has run the PC Diagnostic tool, which showed everything (including USB) in the work.

  Can anyone suggest how to fix this?

  See you soon,.
  GG

  Hi GG,.

  I think that it of difficult to say something about it, if you display any information about your operating system.

  The only thing I can suggest to remove all the USB ports on the Device Manager and restart the laptop. The USB ports will recognize again. In my case it worked and I was able to reuse my USB devices. :)

• Features of HDX18t not recognized after installing Win7

  After a clean install of Windows 7 Ultimate, Device Manager reports three devices Base system without driver and two unknown devices (ACPI\ENE0100 * ENE0100) and (USB\VID_138A & PID_0001 & REV_0372 USB\VID_138A & PID_0001).

  As far as I know, all the USB ports work correctly, as does everything that I tested (some ports that I don't use).  I assume that ACPI has something to do with power management, but I can't find any other indications of power problems - well that I had to replace the battery not long before installing Win7 because it was not supported.

  What are these five devices, and how can I find the drivers - especially for the three who seem not to identify?

  I tried to use the tool "automatically find your products and solutions ', but it does not load in the latest version of SeaMonkey, and with IE9, it seems to start but shows no progress after more than an hour.

  Any suggestions?

  Hello:

  This is the base system device.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76497-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The first unknown device that you posted that needs of pilots is that one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-66577-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The second unknown device what you have listed is this one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-67648-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  Paul

• Webcam and DVD player get not recognized after installing an update

  Original title: Why webcam stoped working after vista update? __
  Cam web and CD/DVD of my hp 9623 cl stoped working after the update to Vista. The two are unavailable in Device Manager too.

  need help to restore it. Thank you

  Hello

  1. may I know what update has been installed?
  2. did you restart your computer after installing the update?

  Run Fixit diagnostic tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Satellite L750 - Bluetooth does not work after BIOS update

  I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

  As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

  If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

  Hi JasonL750,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

  In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Vista will not boot after installed updates

  After installation of .net Framework 3.5 Service Pack 1 for .net Framework Assistant updates. 1.0x86 (KB963707) and Windows Vista (KB968389) to my Dell XPS M1330 laptop, my computer did an automatic stop down. I couldn't restart my computer correctly after this {2nd time this has happened}. I restarted my time 1st comp by selecting the command prompt and the 2nd time by catering to last known position. I did all as usual by pressing F8, F12, F2, diagnostic test, memory test and a little more. Right now I'm running, but I'm going to be scared to do another update when the time comes. Can someone help me please on this issue. Many thanks in advance, Ron

  Hello

  1. keep good backups of your data using redundant methods.

  ------------------------------------------------------

  2. it is very possible that updates do not install correctly are the symptoms of the real problems
  and not the real cause of their.

  ------------------------------------------------------

  3 set updates download but you can install them - and you can install them one at a time if necessary.

  Control Panel - Windows Updates - left settings.

  and run it to restore updates

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  4 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------

  5. record how to remove updates if necessary:

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.