Not same brightness on PS than PC

I open a photo with PH CS3 and the picture is dark, but in the computer, it is way lighter and if I feel, it is lighter. Do you know what to do?

There should be a button that you can click on your initial post. Not necessary but if you do not find the icons being new forums and all.

Tags: Photoshop

Similar Questions

  • Qosmio X 770 screen is certainly not as bright as other laptops

    I visited SEVERAL retailers that sell Qosmio X 770 and 770 X screen is certainly NOT as bright as the other phones such as Qosmio models other same Satellite.

    I compared the X 770 other laptops in parallel to several retail stores, and the 770 X seems dimmer. I made sure that the setting of brightness on two laptops were maximally every time.

    I even open Windows Notepad in the comparison of laptops, and I noticed that it is not only the X 770 less bright, she has a lower level of "whiteness". White space (for example, in Notepad, or when browsing the web) is "less white. The whiteness seems very dull in the 770 X compared to other laptops.

    I wonder if it is a flaw in the 770 X? I asked each vendor to each store and they said that it is 'normal', and that's how the laptop was designed.

    Perhaps as a portable game, they have decided to do not make too bright to make the game more comfortable? If one of the X 770 engineers could answer that, I would be very happy.

    I'm also in Australia.

    Hello

    I put t have the 770 Qosmio X but I have the U400 and a Tecra A11.
    U400 display is brighter than the Tecra A11 display.
    The point is that Tecra A11 is equipped with different LCD screen.
    Type of lighting is of hublot, LED and the NIT of brightness (value) to level 8 (maximum) IS220d.

    The U400 is equipped wit another screen LCD and the NIT of brightness (value) to level 8 is 250.
    So it s 30NIT higher then on the display using the Tecra A11

    The 770 X supports 17.3 display "(HD+) and the NIT of brightness to level 8 is 220lente"
    So it's the same brightness as the Tecra A11 is but drive as on the U400 display.

    But this isn't a problem of material or display error. It s simply different types of display... You know
    Personally I like both... both screens have the advantages and disadvatages in use...

  • Hola, mi mac is resetio there is a that comprar nueva tengo todo borrado lie ps, lo pago cada dia 17 pero este not so is lo tengo than descargar y me cobraran again o puedo hacer lo?

    Hola, mi mac is resetio there is a that comprar nueva tengo todo borrado lie ps, lo pago cada dia 17 pero este not so is lo tengo than descargar y me cobraran again o puedo hacer lo?

    Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

    -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    -Windows or Mac has no importance... 2 on the same operating system or 1 on each

    -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

    .

    Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

    -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

    -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  • Mail (8,0) keeps smoking - will not be open for more than a minute or two. Help?

    Mail (8,0) stop smoking. Will not be open for more than a minute or two. This has happened for several days. Help?

    You have all the extensions Mail any installed?  Who is your email provider?

  • Windows store dashboard - > page shows Adoption - service is not available error - for more than a week

    Windows store dashboard-> Adoption watch page - service is not available error - for more than a week. When the service should be back online?

    Text of the error - the service is not available now. Please try again later.

    Hi Sushil,

    Please post this question in the following link to MSDN, for assistance:

    http://social.msdn.Microsoft.com/forums/windowsapps/en-us/home?category=windowsapps

    If you have questions about Windows operating systems, help us on this forum.

  • How to use photoshop with the same account on more than one laptop?

    How to use photoshop with the same account on more than one laptop?

    a single user license entitles you to two facilities simultaneous/activations.  so, what's the problem?

  • The input and output encodings are not same

    Hello

    I'm trying to quantify a value by using the function 'Encrypt' and the same thing I'm trying to decipher in the next page before you update the database.

    I am using the same key algorithm and the encoding process to decrypt.

    But he is back this error "input and output encodings are not same.

    Can someone help me on this?


    form.txtPassword is plain text.  You can't decrypt() plain text.

    --

    Adam

  • I have not received emails for more than a week; but I can send them on the same account

    I was not able to receive emails for more than a week, even if I can send them to this account.

    Using Windows Live Mail or Outlook?

    For Windows Live Mail:

    The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

    For Outlook:

    http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  • Display Clip not as bright as the black clip of money?

    My Silver 4 GB Clip arrived today ' hui - I flashed by (. 30) firmware and I noticed that the display is not * nearly * as clear as the display on my 2 GB Black model (same firmware).

    Both Clips are of type V1.

    Display on the silver model looks no brighter than the display on my expresses (nowhere near as bright as the Clip black model).

    Is this normal? (Is there some kind of filter on display on the silver model Clip and expresses it?  I * think * I remember reading somewhere that there is some Sansa players with a filter/coating anti-reflective (or reflective?) on the screen, but don't remember the details.)

    I guess I can share plates with one of my ten $ 1/GB refurbs I bought for parts a year from now when the warranty expires.  Heck of a PITA to have to squint at this screen dim pimped out for a year, however.

  • Photo appears much brighter in Photoshop than to use a viewer of part 3

    It seems to me that when you open an image in Photoshop (b & w), it appears much brighter than for example

    in Xnview or when you use the editor SnagIt or a glimpse of the room attached to the same photo in Outlook.

    Any suggestions?

    Photoshop CS6 32 b 13.01 (no plug-ins extra)

    On WIndows x 64 10

    Thank you

    =

    Capture-14102015 081855.png

    Photoshop is not a fully color managed display pipeline, other applications.

    Which means that Photoshop converts the profile document incorporated into your monitor profile, on the fly, and these corrected values are sent to the screen.

    Other applications simply throw the RGB values in the file directly on the screen with no correction.

    If you still think Photoshop will not, basic troubleshooting is to confirm that the document profile and the profile of the monitor are present and correct. If there is a problem with one of these, Photoshop does not display correctly.

    A monitor with a standard profile. If you don't have one, sRGB IEC61966 - 2.1 is often close enough for most non-critical uses.

  • U2715H makes buzzing when the brightness is less than 85 ~.

    My new monitor U2715H was beautiful, but makes an annoying Hum/Buzz sound. I found that I could get the sound to go by increasing the brightness above about 85. Given that this brightness level was too high for my application and the sound was distracting, I contacted Dell support and said it was a very unusual problem. They sent me a replacement monitor that I just was put in place. Unfortunately, the replacement screen suffers exactly the same problem! I found messages here to describe this same question in other models (U3011, U2312HM) a few years ago but have not found how / if the issues have been resolved subsequently. Any advice on getting a monitor which do not suffer this problem and/or technical explanations for why that should happen would be very useful.

    A little more internet research gave a lot of information on this issue as well as possible workarounds:

    www.SilentPCReview.com/stop_lcd_whine

    www.SilentPCReview.com/.../viewtopic.php

    www.gHacks.net/.../Decrease-Noise-of-LCD-Displays

    I will try to adjust the brightness ~ 80 to remove the buzz and then use a software solution to reduce the observed brightness.  This seems as good as the appropriate brightness swing the OSD setting and eventually consume 10 to 20% more energy, but can be a viable compromise.

    Dell Ultrasharp monitors so I knew there was a good quieter alternative to the U2715H, I would definitely try this, but the information I have suggests that this question may be present in 27 ".

  • "Not available" brightness - can't change the brightness level

    Omni HO 27-1015 t CTO Desktop PC product number: Windows 8 new installation B2Q20AV

    I can't control the brightness in the settings - brightness icon bed: not available

    No error message

    Setting of power doesn't have the brightness slider

    Forward power, lack of control of the brightness setting

    Reinstalled the Intel drivers from the HP site with administrator installation and reboot.

    Thanks for any help

    I had this same problem on a spectrum One and it was driving me crazy! Windows wouldn't let me change the brightness no matter how, I went to this topic, and I saw that you get the message "Not available". Finally, I stumbled across the "HP My Display" program and was able to adjust the brightness in there. What is loaded on your PC? So far, it's the only way I found to change the brightness on this machine.

  • I can't get my new Nikon D 810 raw file to load in Lightroom. I did this same thing for more than a year using a Nikon D800.

    When I go to add my raw files, as I have always said that it cannot read the raw files. I called Nikon one told me that in the D810 raw files are the same as the D800. Something is in place.

    Re: D810/Lightroom5 import Raw files

    Raw files are not the same as the willing D810 with a different sensor than the D800. The layout of the file may be the same, but this does not mean any software that supports the D800 will support the D810. Adobe has the new camera profile and add calibration profiles and then release an update to Lightroom. ACR 8.6 RC supports the D810, LR 5.6 will support the D810 probably too. For now, you can convert the nef files to DNG using the dng converter that comes with 8.6 ACR: Adobe Photoshop Camera Raw 8.6 RC CC and CC 2014 Release Candidate: support files raw digital camera - Adobe Labs

  • How can I put the same bookmark in more than one case?

    I have some bookmarks that I want to keep in different folders; in Safari you can do it easily, but in Firefox when I try to move a bookmark in a new folder, the bookmark is removed from the original file rather than create a new one. Friend I missed something?

    Hello

    Similar question: https://support.mozilla.org/en-US/questions/1030713

    You can copy and paste easily bookmarks in the library:

    • Bookmarks

      > Show all bookmarks

    • (I'm not a mac user so I apologize if my shortcuts are false) For a quick job, select bookmarks, and then press command + c / Ctrl + v for copy and paste

    It also works on the bookmarks bar by bringing back the contextual (right click menu) and paste via the context menu, assuming that you navigate to the folder.

    Also, as noted cor - el's post, please visit: https://support.mozilla.org/kb/Bookmark+Tags

  • Since I updated to Firefox 8 on Mac OS x 10.4.11, Firefox does not open more (not same previous versions downloaded via Safari). I get the error message "You cannot use Firefox with this version of Mac OS x" (translated from Dutch).

    I tried to create a new profile, the problem remains the same.

    None of the 3 accounts on this desktop computer can use Firefox. This has never been a problem. Today (14.11.11) I've updated Firefox to 8 and nothing more. Via Safari, I downloaded Firefox 7 to reinstall, same error message.

    From Firefox 4, Mac must have an Intel x 86 processor (which you do not have) and OSX 10.5 or higher (version OSX 10.4).

    The good news is that Firefox 3.6.24 still support OSX 10.4 and Mac with the PPC Mac architecture. The bad news is that the support for Firefox 3.6.x series is likely to end in the first quarter of 2012.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

Maybe you are looking for