Not to recognize the pressure from the pen of Photoshop
I recently installed Photoshop CC to use with my my Bamboo of Wacom tablet. However, the brush settings give a tiny and gray alert symbol out when I try to select the pen pressure. I tried both reinstalling the Tablet and the PSUserConfig fix and neither fixed it. This does not happen with the elements just Photoshop regularly.
Any advice would be greatly appreciated.
Hi caitlinm,
Please make sure that you use the latest version of Photoshop and latest Wacom drivers installed.
Make sure you have disabled Windows ink SOLVED! Wacom-Cintiq Pen pressure sensitivity Incompatible when Windows of ink enabled Photoshop-CC-CS6 - YouTube
See also that these Photoshop threads do not recognize the tablet stylus pressure. Have tried everything. Help?
Kind regards
Assani
Tags: Photoshop
Similar Questions
-
I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom
The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?
http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!
-
in applications, the loading mark keeps appearing and can not complete downloading the trial of Photoshop and Dreamweaver.
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-check the file hosts for blocked entries https://forums.adobe.com/thread/1912777
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.
https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html
http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html
-
Pressure from the pen of Photoshop Inactive
Heyo!
For the last day or two, pressure of the pen works fine. Whenever I make the brush strokes, these are solid lines instead of be conical. To make things more heinous, even the Visual image of my brush in the right corner displays any kind of cone. Photoshop does simply not recognize if diminishing, however, other dynamic shape tools work. I can adjust the brush and the others, but I can't react to the pressure of the stylus.
Now, I've uninstalled and reinstalled photoshop without success.
So I thought that maybe my drivers for my Ugee 1910 b can be updated; However the stylus pressure works perfectly well in Storyboard Pro and any other drawing program. It is precisely photoshop which refuses to recognize the stylus pressure.
This is a Storyboard Pro line, tapering obvious and the stylus pressure.
I looked around forums and online and can't find this specific problem. Usually it's someone forgets to put the pressure of the stylus, or that they do not receive pressure of the pen on any program.
Also, I use Windows 10 and a big update that happened a few days ago and I don't trust the two are related.
Any help would be very happy!
I had the same problem a month ago. I've uninstalled and reinstalled the driver for Wacom and who sets. Restart the computer before the reinstall.
-
My h610 Oh pro does not work with the pen pressure?
For my h610 Oh pro works with almost all programs for the pressure of the pen including adobe flash cs6 (Yes cs6, I dunno for cc). It also specifies the compatibility with adobe photoshop cc 2014, but for some strange reason, it does not work with photoshop cc 2015. Although I work with manga studio right now, it would have been nice for the tablet to work with photoshop.
I know that this question has already been asked, but it was before Oh for photoshop patch 2014 (long ago).
Contact Oh updates the driver.
For some reason, they always update their drivers for each version of the application.
-
I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7. It works very well but all of a sudden stopped working. When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes. Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple). The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified. When I click the first device it freezes the computer for awhile.
I tried to move the ipod to different USB ports that make no difference. However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially. These two seem to have resolved themselves in Device Manager...In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?
Hello
Thanks to community Microsoft can help you with your concern for Windows!
You are facing problems with the USB ports on the computer.
Method 1:
Run the troubleshooter of material and check what is happening.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.
You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:
1. click on start and then click Control Panel.
2. click on system and Maintenance, click System, and then click Device Manager.
Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.
If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.
Method 3:
You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
If the problem persists, or you need help on Windows please keep us informed.
We will be happy to help you!
-
Tecra P4 not to recognize the new HARD drive
Hi all
I have a Tecra P4 - PTS40A-02100V, which does not recognize the new drive of 80 GB Hitachi (HTS541080G9SA00). The laptop is out of warranty and replacement drive was purchased. This is the second new floppy disk that the supplier sent me. The provider is an official supplier of Toshiba in Australia. Customer paid ~ $400AUD to the drive, if that could be a costly exercise.
I am able to get a vanilla Toshiba restore to work on the PC, but our organization uses WinPE based boot environment PXE for the kickoff of image and the version of Windows XP. It is not possible to use a generic Windows XP in our environment.
DiskPart in WinPE will not recognize the disc. Partition Magic and other popular applications will recognize the disc, others not. I can create an NTFS partition and format. Can create basic MBR and MFT, no chance to recognize. Also, I can use the drive in a caddy USB Windows XP on another end PC.
This new drive appear the same questions in a known working P4. I don't see any option in the BIOS to work around the problem. I updated the BIOS to v3.20, but the result is the same.
Clues?
Hey Buddy,
Just to test: is it possible to install Windows from the Toshiba Recovery disk? Have you tested this?
And interesting to know what the authorized service provider said of this behaviour. Did you already ask guys?
-
DV9000 freezes - not to recognize the new second Drive
The laptop in question is a HP Pavilion DV9225us (DV9000) running Windows Vista Ultimate 64 bit (SP 2) with 2 GB of RAM and a chip from AMD Turion 64 x 2 TL-60 2.00 GHz.
I took the Samsung existing 120 GB drive in the second and replaced drive bay by a WD3200BEKT Scorpio 320 GB drive. After I put the new Scorpio drive with the correct HP caddy, the system would not start (for example, Windows Vista began to start, but hung on the screen empty which poster right before that with the Windows progress bar downstairs). I removed the Scorpio, and put it back in the original Samsung drive. Needed to run "Startup Repair" Windows several times during the sequence before priming it could start normally. (I guess he was trying to cancel the "fetid" caused by the player of Scorpion and trying to back up my original Samsung drive.) He finally managed (thank God).
I upgraded my BIOS on the DV9000, but that did not work. I tried also to access the disk in the BIOS during the boot. The BIOS as a secondary drive was there, but when I tried to do a BIOS diagnostic on it, he is hooked. In fact, he hung even when I tried to make a diagnosis of BIOS on the main drive as well.
After having contacted WD support, they suggested putting a jumper between pins 1 and 2 on the Scorpion to allow a PCN (reduced power setting) in the hope that it would recognize the HP. That no longer works.
I just have another HP Pavilion DV9620us (DV9500) laptop running Windows Vista Home Premium 32-bit (SP 2) with 2 GB of RAM and an AMD Turion 64 x 2 chip TL-58 1.90 GHz. It has also two drive bays. As an experiment, I installed the Scorpio 320 GB drive in
the second drive bay in this laptop. This laptop IS able to recognize (for example, mount) the reader, so for the heck of it, I formatted the disc while he was there. Then I took the drive formatted and installed on the second drive bay in my first laptop (DV9000). However, this did not help, because again once the system wouldn't start.
What is going on? Why my DV9500 laptop would be able to recognize and use the drive, but won't my DV9000? They do not use the same motherboard and BIOS?
I know that the Samsung 120 GB drive uses a connection SATA 1 (1.5 GB / s) and the Scorpio 320 GB SATA 3 (3 GB / s). The DV9000 does not support a SATA 3 drive? It's crazy to me, sounds, but I am so frustrated now, I think that anything...
Service and Maintenance Manual for this model: http://h10032.www1.hp.com/ctg/Manual/c01311536.pdf
indicate it is officially supported: 200, 160, 120, 100 - or hard disks of 80 GB.
Other size may work, but not in the official list of supported.
While some of the dv9500 models claims to "support all SATA drives.
-
WebWorks app not to recognize the plugin for Blackberry app
Hello! I'm portage a webapp Android to WebWorks. My Android application using Phonegap, so when I discovered the new WebWorks used to, it was a great relief. But the problem came when I tried to use the BlackBerry push service, because demand for some strange reason does not recognize the plugins I have installed through the console, just like the documentation says http://developer.blackberry.com/html5/apis/beta/blackberry.app.html.
Since then I have removed everything that belonged to the push service and I installed the com.blackberry.app plugin to test the ways that they are supposed to work. It debugged in the Web Inspector and I have this message.
ReferenceError: Can't find variable: blackberry
This error came from this line in my code:
Console.log ("the State of the screen is:" + blackberry.app.windowState);
In my config.xml file, I have the line:
I am new to this platform and I don't know if the plugins should be called somewhere in the html file or the js to make it work. Or is there something else wrong on how I use the plugins?
BTW: my application uses the last cordova because I developed since the SDK WebWorks 2.0.0.54, but my app Android used Cordova 2.0.0 and this library is called in the html code. So, when I tried to change the cordova for the last file, the application didn't work, so I left there where he was.
In the standard application of Cordova, the application calls app.initialize as follows (additional code left to show the implementation of the call and the scripts required):
...