not to run after the file transfer

Similar Questions

• My Blackberry 9000 blackBerry smartphones starts after the file transfer has failed

  Hello

  I started to transfer a video clip using the Desktopmanager program, during the file transfer the when t PC standby and after that, the terminal is dΘmarre.

  After removing the battery, it shows a white screen with a small clock and it is black; After removing the battery for 5 hours theink happening only is the redlamp is on during 2 to 5 seconds, then nothing.

  I hope someone has a tip on how to solve this problem.

  Thank you

  Digger

  Hello

  I was unable to get any contact with my BB 9000 so I had to turn service.

  Best regards

  Digger

• I set up ftp in iis for the file transfer. On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.

  FTP problem

  I set up ftp in iis for the file transfer.  On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.  When I look in the properties of the default ftp sites ftp I noticed that the Directory Security tab is not there as on the other pc.  How to return this tab or is it the windows software that's not fair.  I am running windows XP 2002 SP2 on it and I've updated to SP3.  I have no idea.

  Hello

  I suggest you to send your query to the link for assistance.

  http://forums.IIS.NET/

• Not able to view the files in Windows XP after installing Ubuntu 10.10.

  Original title: problem opening of windows.

  I installed ubuntu 10.10 on my system unfortunately it took total hard drive in a single partition and now I am not able to access microsoft windows. What to do there are a lot of important files in that partition. I am not able to view the files that have been seen in windows. Please suggest.
  concerning
  Hari

  Hi hari,.

  It seems that Ubuntu has supported the installation of Windows. At this point, I would recommend youto contact support Ubuntu uninstall Ubuntu. This should return Windows XP & you can access your files.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried change Classic theme but get error "the visual style clould not be loaded because the file failed to load"

  I have a problem with my windows xp theme. I have catchy to change Classic theme but theirs aren't Exchange and I apply another theme there is error "the visual style clould not be charged because the file failed to load" and I'm windows resulting in normal but agin theme same error. Please tell me the solution.

  Hello

  Please follow the steps below.

  Method 1:

  Run the tool from the link below System File Checker.

  http://support.Microsoft.com/kb/310747

  Method 2:

  Try to create the new user account and check if it works very well.

  http://support.Microsoft.com/kb/811151

  See also the below mentioned link.

  http://support.Microsoft.com/kb/555512/en-us

• How to use the file transfer Wizard

  I have and old Dell XP and I am go buy

  new Dell with Windows 7.  I'm going to

  disconnect the old computer and with some help

  Setup new computer using Dell Windows 7.

  I want to save, copy and install My Documents,

  My computer, email, and Favorites in new

  computer.  I tried the file transfer Wizard and

  the choice of external hardware is a floppy disk.

  I would like to record information about a cd, if

  possible, and when I get the new computer installation

  that's when I purchase.  I'm not

  technical savy.  Could someone please help.

  Thank you. Judy

  The Complete Guide to Windows Easy Transfer - video

  Carey Frisch

• Receive the error message "DISC ERROR C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING WRITING. MAKE sure THAT YOUR DRIVE HARD IS NOT FULL AND THAT THE FILE IS NOT in USE"in rise of nations?

  Original title: rise of nations

  on the rise of nations, I get this error code. How to fix it. DISK ERROR WRITING C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING. WMV. MAKE SURE THAT YOUR DISK IS NOT FULL AND THAT THE FILE IS NOT IN USE.

  Hello

  
  1. do you get this error during installation, downloading or playing the game?
  2. What is the amount of free space on the hard drive?
  
  Method 1: clean boot the computer and check if the problem occurs.
  
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
   
  Method 2: uninstall and then reinstall the game and see if the problem still occurs.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  http://www.Microsoft.com/games/thronesandpatriots/default.aspx
  http://www.Microsoft.com/games/riseofnations/downloads.aspx
  
  Hope this information helps

• . M2T "generic import error" after the files moved

  That someone know something for winging a .m2t file that PrPro generated previously imported and edited very well, who has then squirrels after the file has been moved?  (details below)
  

  Thank you.

  -------------------------------------

  Recently, I moved the source (including the sidecar files) for work files off my C:\ to a backup disk, in a desperate move to take off a suddenly frigid Premiere Pro and still (C:\ drive space was extremely low).  I thought I was OK to do it, since I had exported all my final video files and confirmed that they looked fine (amount).  However, some of them were .m2t files, which still had no audio its chronology.  Much scrounging to find out later, I decided to try to re - export these files from their source PrPro projects, this time without audio multiplexing.  I expected to just move the source files in their new location.  It worked for most of the files, but not the .m2t file.

  Here are my patches attempts (failed):

  1. Use move function PrPro manually navigate to the file and select it.  (Fails.  File is not displayed in the location of the project and is still missing in the timeline.  "But PrPro generates no error to announce or explain the failure).
  2. Re-import the file in the current location.  (Fails.  I get "error importing generic," with zero further info.)
  3. Move the file (and the sidecar files) to the original location, then re - locate with PrPro.  (Fails, as 1.)
  4. Re-import a file in the location restored (after 3).  (Fails.  Same as (2).
  5. Copy and rename then file (and sidecar files) in restored location and then freshly import this file completely-news-to-PrPro.  (Fails.  Same as (2).

  I have not yet tried the things:

  1. Deleted cache.  I have read horror stories here on edit work days lost to empty cache, then now that I only once the discs are printed and iso are archived.
  2. Convert a file using another program .m2t. Strictly speaking, I tried with (groan) Windows MovieMaker, but it will not display an image larger than 740 x 480 (Yes, settings allow larger, but only as Giants black residents.)  I maybe reinstall my prior NLE (Avid Pinnacle) - should work, but may take hours to reinstall.

  Solution:

  I gave this fixation within PrPro and rather bought a type of video file converter.  I got Video Converter Ultimate of Wondershare, which was not too expensive and works well.  Now all my .m2t files are converted into file types PrPro like much better, and they import no problem in my project.

• The disks have not been washed on the file system

  Hey all the...

  After an update of the BIOS on the hosts of my essay, I was finally able to list as active FT.

  When I click with the right button on a virtual machine and turn on FT, I get an error...

  "Non supported configuration of virtual machines for the fault tolerance. The unused disks of the virtual machine disk blocks have not been washed on the file system. This is necessary to support features such as fault tolerance.

  When I turned off the virtual machine and activate FT, he begins to rub the VM disks... it takes a lot of time.

  Can someone explain to me exactly why he needs to do that? Just trying to understand the technology...

  How a disk get thick-eager reset default? That is to say. is it possible to my model?

  Yes, use the data store Navigator to inflate the disk in question.

  What are the benefits/drawbacks of being thick-eager to zero, rather than just thick?

  A thick disk eager-reset to zero has all the space allocated and set to zero at the time of the creation. This extends the time it takes to create the disc, but the results in the best performance, even on the first entry for each block.

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• Automator action "CVS Update" could not be loaded because the file ' / usr/bin/cvs "is not found.

  Hello

  I just receive my MBA a few weeks ago to Apple and noticed my Razor mouse worked only with BluTooth but not when it is plugged into a usb port.  Other mouse usb and external drives readers work well.  Razor support told me the plug-and-play subsystem has screwed up, and errors have been associated with Automator.

  I have only a local account and I have not linked to the iCloud account.

  I don't want to reinstall my laptop because I have 300 GB of data on it, as well as some programs that I installed.

  I think that a package is not properly installed or missing, but my OSX knowledge is poor, because I have just started using a Mac!

  Sophies-MacBook Darwin kernel version - Air.local 15.2.0 Darwin 15.2.0: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64 x86_64

  Error are usually refers to a/usr/bin/cvs binary missing, and he's not here.

  # ls-l/usr/bin/cvs

  LS: / usr/bin/cvs: no such file or directory

  Some key messages,

  The "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  Someone would let me know how I could diagnose it and perhaps repair?

  Best regards, Sophie.

  System.log reported,

  [dec 19 10:33:59 - Sophies - MacBookAir loginwindow [99]:-[SFLListManager(ServiceReplyProtocol) notifyChanges:toListWithIdentifier:] notified of changes of the list element with the identifier com.apple.LSSharedFileList.RecentApplications

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Add movie to iDVD Menu" action could not be loaded because the application 'iDVD' not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Add Photos to the Album' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Add' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Checkout" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Commit' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Find items from iPhoto" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Get iDVD slideshow Images' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Get Selected iPhoto Items" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Get iPhoto features' action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Import files in iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Launch of remote broadcasting' cannot be loaded because the application "QuickTime Broadcaster" was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD New Menu ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new sequence in the film ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new slideshow ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IPhoto New Album ' could not be loaded because the"iPhoto"application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "New QuickTime slideshow" action could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Play Slideshow iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Photos of the magazine' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Set Background Image iDVD' action cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set iDVD button face' cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set Annotations of film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the properties to read film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the movie URL' could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "See the iDVD Menu hand" could not be loaded because the application 'iDVD' was not found.

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: tcp_connection_tls_session_error_callback 9 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: 8 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error

  dec 19 10:34:44 - Sophies - MacBookAir syslogd [48]: sender ASL statistics

  P.S Xcode is installed from the app store.

  and MacPorts is installed.

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows media player giving meed msg writeasx supporting not attempt to play the files

  Windows media player giving meed msg writeasx supporting not attempt to play the files

  Windowd Vista Home Premium.Windows 11 media plaer. Notice to lovers?

  Hi DavidCrowder,

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. when exactly you receive this error message?

  2. have there been recent changes to the computer before the show?

  3. it's happens on a particular file?

  4. What is the full error message do you get?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Word 2007 your AutoCorrect, MSO1033.acl, file could not be saved. The file may be read-only, or you do not have permission to modify the file.

  To get this message when opening Word 2007.

  Your AutoCorrect file, (Japanese weird character? with) MSO1033.acl, could not be saved. The file may be read-only, or you do not have permission to modify the file.

  ALSO when I try to close or save a Word 2007 I get this message:

  Word cannot save or create this file. Make sure that the disk you want to save the file on is not full, write-protected, or damaged. (C:\Program Files\... Normal.dotm)

  I then click on Cancel to not save the changes and then get the following message appears:

  Changes have been made that affect the model overall, Normal. You want to save these changes?

  I click No. in addition to this I'm currently not able to print from word 2007 older that I created a few months before this problem started

  I studied that went through all the troubleshooting steps suggested Microsoft to resolve this issue, but have had no luck... any other help or suggestions would be appreciated. I'm not

  Thank you!!
  Frustrated in minutes

  Install the fixit from article KB2258121 (fixit #50461).

  Although this problem is not mentioned in the KB problem, the fixit indeed solves this problem.