Notification does not send when supply is triggered by the access policy

Similar Questions

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

  Things I tried but has not made a difference:

  reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

  With xp media center

  PS. This occurs also at any time the information down to install an active x on any site control

  The only way to surf now with frustration is to use IE 8 NOT add optional

  So I fixed that on my own and that's how I did it.

  You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

  Uninstallin IE 8 by going to:

  Start--->

  Control Panel--->

  Add Remove programs--->

  Scroll down to IE 8--->

  Click on delete.

  IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

  Resart your computer and install IE 8.

  This worked for me and may or may not work for you.

• The mouse pointer does not hide when you type, even with the box checked.

  Hello everyone.  I turned on the check mark in the properties of the mouse "hide the pointer during the strike".  However, the mouse pointer does not hide when typing, but instead remains visible all the time.

  No one knows why this happens?  In previous versions of Windows, the pointer should simply disappear when keystrokes are typed, and then reappear when the mouse is moved.  Is not the case here!

  Thanks for any information!

  System details:

  Windows Vista Ultimate x 64 SP1, 4 GB ram
  Intel Core2 3.16 GHz cpu
  NVIDIA GeForce 8800GT with two monitors
  Aero is enabled.

  Hello

  Welcome to the community of Windows Vista.

  1. what application you are working on when you encountered this problem?

  Hide the mouse pointer option allows you only to remove the mouse curzor of
  the focus in the working window so that the cursor does not cover the text or the pitcure you see.

  Make sure that the curzor of the mouse is placed inside the app as you type, as it does not hide the mouse, if it is outside of the application.

  Change the settings of the mouse
  http://windowshelp.Microsoft.com/Windows/en-us/help/efd700f8-bbc0-4F04-9f78-3bdb4bbf47011033.mspx#EKD

  Kind regards

  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• thinapps does not start when you use a VPN gateway access

  Hello

  We have a test lab that we use for demo/test Horizon Workspace.  When we use a Windows 7 VM inside the field of local laboratory which the vApps Horizon are on, all the features - including ThinApps - works fine.  However, when we VPN for the lab and try to launch a Thinapp of Horizon, seems to fail. No error message - just thinapp does not launch.

  I have attached the diagnosis local Horizon of my phone files that I used to try to launch Thinpps all in VPNed in, if someone could help me I would be really grateful.  Thank you.

  -Allen

  Today there is no real solution for this. If you want to manage ThinApps clients must be in the same domain as the ThinApp/workspace repository.

• get rid of the email in Outbox that does not send when I used the reply and forward.

  When I got trouoble replying to email messages went to my Outbox and stayed there.  I decided to clean things up so I deleted them.  Now, whenever I connect to the computer until get the message at the bottom of the screen it says 1 mailing of 4.  There is nothing to send because I deleted everything in the Outbox.  How can I get my computer to stop trying to send emails in the Outbox that I deleted.  Any help that anyone can give me in this matter would be greatly appreciated.  Thanks again.  Dolly.

  You don't mention your e-mail program. If you use Outlook Express, follow these steps.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• ComboBox does not send keyboard and no event click the menu drop-down.

  I use a ComboBox to search in my application. The application is a periodic table, then the user will be able to search by name of element, atomic number or a symbol. The ComboBox control is working very well, I just have two questions that I was wondering if someone could lead me in the right direction. The first problem is that, when a user clicks the ComboBox for a search entry, the keyboard does not dispatch. The user must use the native swipe gesture to display the keyboard. This isn't a huge problem, but I would really like to work for when the user clicks the ComboBox keyboard is distributed. IV ' e looked in this and concluded that it should work, ComboBox with a property TextInput keyboard should appear, but it doesn't. I also discovered that it is impossible to show/hide the keyboard with the code. I use FB 4.5 and 4.5 Flex and the most recent SDK Tablet from BlackBerry. Y at - it a bug or something?

  Also my other question is once the user starts typing in the search, the filter works great and the drop down displays all of the possibility. But my only problem is the user cant just click and the item in the drop-down menu. For example when the user types "A" all items that begin with a show upward in the drop down menu. The user cannot click on an element. The only way that the element can be selected is if the user continues typing the word until it is highlighted as the only option and then enter hits. This too is not a huge problem, but I like it to work so that if the user types 'A' they can do scroll down the menu and select the item they want. IV also looked into this and can't seem to find anyway to drop down the combobox list have a click event. I'll put a code later that you can see what I mean better, but for now its kind of a general questions. I use FB 4.5 version release and flex 4.5 with the new SDK of BBT. If someone can point me in the right direction, or send me any article that would be GREAT. Thanks in advance!

  It is probably easier than you think:

  1. Create a text input control
  2. Add event listeners when the control is changed ('change')
  3. Maintain an internal table of valid matches
  4. On the change event listener, browse each item and make a match that makes sense.  For example, to cut spaces beginning and end and do a string comparison of tiny out based on the length of a text entry field.  For example, if the user types "vel", which would correspond to "Developer" and "velcro".
  5. Create a list control that is displayed once the person begins to type.  Place it under the control of text entry.  Use the local to global changes in coordination and the size of the width of the list of the same width of the text input.
  6. # 4, dump all the data of the list data provider and add items to it based on string matching.  If no match or the text input text is empty/void/null, do not show the list.
  7. If the user selects an item in the list, hide the list, enter the selection to text entry and then send an event that the entry is "finished".
  8. Listen to the event "full" text of entry to perform what you wanted.

  Of course, if anyone can suggest how to get the Combox to work, go ahead.  I have just a habbit to create controls to achieve the appearance and the behavior I'm looking for.

  Good luck.

• My Apple password does not work when I try to download the Flash Player

  I tried again and again download Flash Player on my Mac OS 10.9.5 and when I try to open the installation program, asked me my password and it does not work. However, I used the password to enter this community, and it worked. I use Chrome as my browser. Any help to achieve this will be highly appreciated.

  Hello Gail Rooney,

  I'm not 100% sure if you are referring to your account admin on your Mac, if you were not made me know that I would love to help with anything that anyone else. Anyway, if you need to reset your password for your admin account, so you can leave Flash Player just install, follow these steps and you should be able to reset the password of the admin account. You need to restart your computer. Then, press the command and R keys at the same time when the gray screen appears and hold them until you see the Apple logo. A low loading bar will appear under the logo. Then wait for the recovery mode to load click the utilities tab in the menu bar, select Terminal, type resetpassword, and press ENTER. Close the Terminal window and behind it, you will find the password reset utility. Everything you have to do now is to select the user account you want to reset, enter a new password or leave the field empty and click Save. Then reboot again and sign in to your account admin with the password you just put.

• My helmet is bright red, and the speakers does not work, when I try to adjust the volume when there is no headset/speakers in, there is a sign of the cross as the symbol of the volume where the places are supposed to be, macbook pro retina display

  My helmet is for some time, as the eye of the terminator, glowing and speakers have not worked since. I need to plug headphones or external speakers. Whenever I try to adjust the volume when it shows just a cross symbol under the sign of the volume, where small squares usually are (see below)

  

  Is there a way to fix this? Some other similar forums tell me to try to manually move a switch in the audio jack, but I can't seem to find such a change and the thing that seems most like a light switch, does not move.

  Can someone please help?

  Thank you

  Your audio output is stuck in optical mode, this is the red light.

  The solution is to try to insert and remove the plug a dozen times or more in the hopes of convincing making fall out of optical mode and in electric mode.

• HP P1102W does not print and does not open when it is connected through the USB port on the road

  I bought this printer and I set it with a fixed IP address. After a few months, he has simply stopped working. So I decided to connect to the console and I wasn't able to do it either. I printed the test page and the ip address is 0.0.0.0. I, then, tried to plug in the USB cable on my computer and the drive that contains the software, it does not appear. He is a second and then disappears.

  I would like to get a solution to this problem before I throw this piece of 'material' on the discharge.

  Thank you!

  The 1102W uses what is called USB wireless.  The installation of the printer is the only way to recover the printer on a network in this case.  There is no place to set the IP address without getting a DHCP address first, which is not the case here.

  First, retrieve the default network printer.

  Restore the default wireless settings.
  a. turn off the product.
  b. press and hold the wireless switch and the
  Cancel button and then turn on the product.
  c. hold the button until all lights flash in unison.
  and then release the keys.

  This should reset the default settings of the network.

  Then, uninstall all the software of the computer printer.

  Reinstall the printer from here click on software and Driver Downloads and select your operating system.

  It will take a computer on the same network and USB cable.  Click network installation and connect the USB cable when prompted.

• my memory card for my digital camera does not work when I put it in the memory card slot

  I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

  Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
  then
  Device Manager
  Expand portable devices
  the type of memory card slots should be listed if your type is a yellow triangle in it,
  Right-click on it and choose uninstall.
  It should reinstall it automatically or when you put the memory card in the slot.
  This type of fault is often caused by not using material on the taskbar does not safely remove request.

• Vista 64 Bit Home Premium does not start when a disc is in the optical drive

  I tried to understand this for a long time, but I thought I might as well ask for help.  I use Vista 64 - bit Home Edition Premium and the problem I have is that I cannot restart my machine if a disc is in the optical drive. Specifically, if I have a DVD or Bluray disc in the optical drive (IE a BD - ROM drive). When I restart my computer and a disk is present, the startup process is going past the initial windows screen, but that's how far it goes. My desktop (I don't have a password to connect). Initially, I thought it was a matter of priority to boot but the boot process starts from the hard drive but stops at half way through. Then, I went into the BIOS and removed the optical drive completely from the boot priority list.  But there is no change in behavior. The process stops with the only thing visible on the splash screen is a black screen and the hard drive light flashes and goes out from time to time.  I use this computer as my Home Theater PC and sometimes I have to restart my machine when a movie DVD or a Bluray movie is in the optical drive. I would appreciate any response that can help me solve this problem...

  Thanks in advance...

  There may be something wrong with the files on your hard disk.  We will try to update to see if it helps:

  Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (I believe you need a disc for Installation of Vista to do that, even if some Installtion OEM disc might work, but probably not all the recovery discs).

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If this does not work, or if you do not have the disk, try EasyBCD http://neosmart.net/dl.php?id=1 and see if that works and does everything well.  Make sure what you are doing or you could mess up your boot files and you'd be in a lot of trouble.

  I don't know if the problem is even caused by startup files (but it is possible if it is not the BIOS), but you'd better check and if the procedures are followed to the letter as stated there is no harm in trying.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WHY MY USB DOES NOT SHOW WHEN IT IS PLUGGED INTO THE USB PORT?

  I use my USB key, windows7 ultimate 32 bit is not show I have uninstall all and restarted my computer (laptop), but still does not work, I downloaded some readers but still does not he continues to show me this in Device Manager, I have used several USB but it still doesn't work do not? I'm going to enjoy anyone who helps a lot thanks

  

  Hi Ali,

  Thank you for the update.

  I suggest you to run the next Fixit and check the status.

  Automatically diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  What it fixes:

  • When you install a hardware device, it is not detected
  • Determine if your audio device is plugged
  • The driver updates are not installed automatically by Windows Update
  • You receive one of the following errors:

  Click on run Fixit.

  Please let us know the State.

• table does not exist (when I try to compile the package)

  Hi all

  I can choose from table1 using simple script.

  But when I try to compile the package with select from it table1 I get the message:

  PL/SQL: ORA-00942: table or view does not exist

  Please help me understand how this is possible.

  What additional information should I place them here for you to help me?

  Thanks in advance.

  UPD: The object name is SYS. V_$ PROCESS

  I choose him by using script, so I need all grants.

  But what is the problem when I try to do in the package?

  2788367 wrote:

  Hi all

  I can choose from table1 using simple script.

  But when I try to compile the package with select from it table1 I get the message:

  PL/SQL: ORA-00942: table or view does not exist

  Please help me understand how this is possible.

  What additional information should I place them here for you to help me?

  Thanks in advance.

  It is very likely that you've got access to the table via a role. This allows you to use SQL to access.

  With packages, the grant must be directly to your schema, bypassing a role.