Notification of change of management int ADF Fusion Web Application database

Similar Questions

• online shopping application site using fusion web application and permits required for delivery?

  Hello

  I will develop a shopping site online for a supermarket based on customer's request.

  My site would need to be established with images of objects on different perspectives, filters to sort the required items and online purchase demand operations too. (Similar to the site like ebay, flipkart).

  For that kind of requirement, it will be possible to develop using FUSION WEB APPLICATION without restrictions?

  If possible, do I need to have a LICENSE for the delivery of the application or project to my customer?

  Kindly give your valuable suggestions.

  -TechniM

  It is up to you to decide if the functionality offered by ADF Essentials is good enough for your needs or you need some things that adds the complete ADF (for example, the control data for the Web or Mobile ADF service).

  You can embed other solutions for ADF Essentials application security, so that your application can still be fixed. (example - http://andrejusb.blogspot.co.at/2012/10/adf-essentials-security-implementation.html )

  With regard to accommodation - do a google search for Glassfish server price list. Remember that you will probably need to take into account the load on your application to decide what type of server configuration, you will need.

  The extent of support - you can buy support for Oracle Oracle ADF - check Oracle price list for more details.

• Application requirements for the Application of ADF Fusion Web Server deployment

  Hi all
  
  What I need to know is the following:
  If I develop an Application of Web of merger, based on the ADF business components, ADF Page lifecycle, pages JSF, and ADF Rich Faces components, using JDeveloper 11 g, can I deploy it successfully on an Oracle 10 g R3 application server? I mean, is fully compatible with an older application server such as Oracle Application Server 10 g R3 Oracle Application Development Framework? Or should I wait for a version 11g of the OAS?
  
  I know the Oracle JAVA application server is Weblogic, but I need to know that it is a must for the deployment of generation of ADF with JDeveloper 11 g applications.
  
  Thank you.
  
  Bogdan.
  
  PS: If I posted this in the wrong forum, please tell me and I'll pass it to the server part of the forum applications.

  No, you can not - ADF 11g requires Java EE 5.0 - which means you need to WLS 10.1.3.1.
  See more info here:
  http://www.Oracle.com/technology/products/jdev/collateral/papers/11/certification/index.html

• Change only one field in a Web application using AJAX?

  I have a script that modifies a WebApp via AJAX.  This works.  Only problem is, I want to update not only one field in the element of the WebApp.  When I submit the change via this script, it does not change the field in question, no problem, but clears (empty out) all other areas.

  Is there a setting/variable/etc that I can use so that it will only change the field and leave the others alone?

            <script type="text/javascript">
                  function setRegLevel(level) {
                     
                      // set action for ajax
                      var action = "/CustomContentProcess.aspx?CCID=23108&OID=" + regID + "&OTYPE=35&A=EditSave";
                     
                      // set appropriate field to search by
                      var dataName = {};
                      dataName['CAT_Custom_37'] = level;
                     
                      var searchOpts = {
                          url: action,
                          async: false,
                          data: dataName,
                          type: "POST",
                          success: function(data, txt, jqXHR) {
                             console.log('OK');
                          }
                      }
                      $.ajax(searchOpts);
                      return false;
                  }
              </script>
  

  You must send the other information and update all the

• ADFLibs Fusion Web App - Jdev 11.1.2.3 on redhat 5.8

  Hello:
  
  Say I have create a Web of Fusion ADF application called APP_LIB. This app has EO, VO, AM in the model project and has Pages, fragments and the Taskflows in the ViewController. I want to create an APP_LIB Lib ADF, so I create a deployment profile ADF Lib on the ViewController project. The ViewController being dependant on the model project, the library must be created with EO, VO, AM, Pages, Fragments and some TaskFlows. Right? Or I would create different profiles of deployment for the model and the ViewController project and thus 2 create two separate ADF Libs?
  
  Now, I want to import the ADF of APP_LIB lib into another ADF Fusion Web application called ENTERPRISE_APP. If I imported the ViewController of ENTERPRISE_APP the APP_LIB, would be the EO, VO and AM appear in the model project? Or do I have to import APP_LIB into the project template and ViewController of ENTERPRISE_APP?
  
  Is it better to separate libraries for the project template and ViewController in APP_LIB and create two separate ADF Libs for the model and ViewController? What the experts recommend creating the ADF libs on a project template project and project ViewController and also what is the best way to import the ADF LIB in a Fusion ADF application that also has a model project and the ViewController project.
  
  Can I create two ADF Libs: a Lib ADF for the project template and a Lib ADF for the ViewController and import each project ADF Lib in (model and ViewController) correspondent business APP?
  
  Any recommendations?
  
  Thank you very much.

  Hello

  This is what Oracle Fusion Applications as well. Keep in mind that the ADF libraries are not contained in other libraries, which means that the "Assembly" application requires references from the library in the project view controller

  Frank

• Jdev 11.1.2.3 on RedHat 5.8 - use ADF Fusion Proj for Master

  Hello:
  I'm in accordance with the practice of creating shared libraries of ADF for model, the Code and the user interface, called CommonModel, CommonCode, CommonUI.
  Developers create subsystem projects that import these Libs ADF. Then several subsystems (such as ADF Libs) are combined into a master application that then creates the EAR file for deployment.
  
  Each of the subsystems are ADF Fusion Web Apps. (a model and viewController projects)
  Shared libraries are Custom apps. (with only a single project)
  
  The Question is what type of application to create for the Master project. The docs seem to indicate a custom project, but I think it's wrong and that I have to use a Web of Fusion ADF application for the master who would model and viewController projects.
  
  So, what type of application must be created for the master? Custom = a project or ADF Fusion app that has 2 projects (model and viewController)?
  
  Thanks for the help.

  Hello

  Keep in mind that the types of applications are a few models. Models include a set of libraries of different technologies that you can work on your project. However that does not limit you to use other technologies or libraries outside of this scope. Custom type is open to all.

  Juan C

• Why the icons on my notification baar change on their own and what can I do about it?

  The icons on the notification bar change themselves, and I can't get back them on. I have not deleted any of them but 2 have disappeared and I can't get back them on to stay.

  Hello

  • What do you mean exactly by "icons on the notification bar of their own change.

  You can view these methods:

  Method 1:

  Disable the notification icons and check. See the article mentioned below.

  Remove icons from the notification area (system tray)

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-icons-from-the-notification-area-system-tray

  Method 2:

  Check with a new user account. Follow the steps mentioned below to create a new user account.

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain) and then click user accounts.
  2. Click Manage another account.
  3. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. Click create a new account.
  5. Type the name that you want to assign to the user account, click an account type, and then click create an account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  If the problem persists, you can collect a color screenshot 256 and transfer it to the http://skydrive.live.com/ using your Live ID and I'll check it:

  Screenshot

  ========

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" menu, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click on 'Paste', click on the 'File' menu and click 'save '.

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box 'Save as type', click Desktop in the left pane, and then click"Save ".

  ===========================================================

  See the discussion that follows for more information on how to display a capture in screen answers forum:
   
  How can I post screenshots of my question in the Forum of answers?
  http://social.answers.Microsoft.com/forums/en-us/vistaassistant/thread/ca5463aa-ec2f-4497-8cc4-cfe7fd5861e6

• record is changed in British Colombia ADF.

  How to find a record of database is changed or not in ADF BC developed the JDev 11 g R1 application?
  Thank you.

  It depends on where you want to call the code.
  Support a bean, you prefer AM can access via this code:

      /**
       * Get FacesContext.
       * @return FacesContext
       */
      public static FacesContext getFacesContext()
      {
          return FacesContext.getCurrentInstance();
      }
  
      /**
       * Method for taking a reference to a JSF binding expression and returning
       * the matching object (or creating it).
       * @param expression EL expression
       * @return Managed object
       */
      public static Object resolveExpression(String expression)
      {
          try
          {
              FacesContext facesContext = getFacesContext();
              Application app = facesContext.getApplication();
              ExpressionFactory elFactory = app.getExpressionFactory();
              ELContext elContext = facesContext.getELContext();
              ValueExpression valueExp =
                  elFactory.createValueExpression(elContext, expression, Object.class);
              return valueExp.getValue(elContext);
          }
          catch (Exception e)
          {
             ;// log you message here
          }
          return null;
      }
  
      /**
       * Get application module for an application module data control by name.
       * @param name application module data control name
       * @return ApplicationModule
       */
      public static ApplicationModule getApplicationModuleForDataControl(String name)
      {
          return (ApplicationModule) resolveExpression("#{data." + name + ".dataProvider}");
      }
  

  If you are in an application module EU code above:

  this.getDBTransaction().isDirty()
  

  May be you need to implement a method to the application module you like

  public boolean isDirtyTransaction()
  {
  return this.getDBTransaction().isDirty();
  }
  

  You can then call declarative in an EL.

  Timo

• Is there anything I can change/device manager/cmd Vista for my job wireless in the slot 2 PCI?

  System:
  E Machine T5086
  Vista Home Premium 32 bit SP2
  Intel Pentium 4 3 GHz
  2gigs RAM
  MOBO: 4006173RIntel (Coryville 2) 945G Motherboard
  Wireless card: Hawking HWPG1 device name of PCI card wireless 802.11 g: Ralink RT61 Turbo Wireless LAN Card

  Background:
  I recently installed a PCI-E ATI Radeon HD4650 gfx 1gig card. Unfortunately, with the fan attached, it's a bit too thick to sit safely far from my wireless card that is located in the upper part of the PCI slot. So, I took and it goes down a slot. (I have only 2 pci slots, a pci-e). The card is recognized, the drivers are installed, it is part of the work, there is no conflict, no exclamation, nothing in Device Manager. However, the internet does not work, and he recorded as "disconnected" or "disabled" in the network and sharing Center. So, when I look for to connect to networks, none never appear. I have other computers in the House. Wireless works fine on all others, showing our fine network. The card worked previously above the slot without any problems and always done if I put it back in there. -I don't understand the pci card is a little old, however, the way it has worked well in the first period, I don't want to buy a new wireless card, only to have it also not work in slot 2. It is very possible, there just a problem with this slot, not sure how determine that. Looking for a Windows hotfix.

  Also: No. I am not return my gfx card for a 'thin' (which also means diminished gfx capabilities). : P if there is really no viable, I'll get a good wireless USB adapter, however if someone of you recommend.

  Troubleshooting based on other threads:
  *. Tried to change all the settings in the pci bios. There is nothing to resolve. My particular bios does not have very many parameters to set except the activation or deactivation of devices General.

  1. I uninstalled the drivers and the software wireless is related (through the Uninstall/Change & Device Manager), then allowed the system to detect and ask to install it again in the same session. (I have a configuration saved in my folder for download from hawking.)

  2. uninstalled wireless again. Restarted. Reinstalled.

  3 uninstalled. Stop. Out of the wireless card. Starting without a card. (idk why) Stop. Return the card. Started & reinstalled.

  4 uninstalled. Starts in Mode safe. Reinstalled.

  5 documented IRQ settings. IRQ 22 is used by my wireless card and the "High Definition Audio". So tried combinations of uninstalling/disabling audio through settings manager & bios of the device, uninstalled audio software and then installed the wireless card (Eitherway, both devices specify "no conflict" while two permits.)

  6. check my diary of events for apparently relevant errors. Don't know what than a bunch of other things from the East, but is "WARNING: autoconfiguration WLAN Service stopped successfully." So, who researched and tried a few corrections: cmd > netsh > wlan > set autoconfig enabled = yes interface = "wireless network adapter" I get "no such wireless device found." I also tried with "wireless network connection" that I got the same error.

  7. in respect of the above, I tried cmd in admin mode > sfc/scannow > came into services to start the wlan. But these instructions fail because it is already started / auto services.

  8. Finally uninstalled all my ATI software and released the gfx card. Also uninstalled the wireless. Restarted. Re-installed the wireless.

  9 tested back in first Pci wireless. Works. Put back in place in the 2nd, does not work. Gfx card is always out ATM plugged into a cable LAN to have internet at the moment. I was surprised that winupdate found a update for my wireless card, but I have install the driver was the one I used when remembered first install the card waaay back when. Eitherway. Updated. It still does not.

  10. I tried through the Hawkings own connection utility: "Utility of zero Configuration." "passage" to zeroconfig fails or seems to do nothing. ZeroConfig also register my card wireless as "disconnected."

  About to give up because I'm not sure what I can try. I read on attempt to failover to ACPI standard, but I don't have the windows cd. Other methods to do it without the CD and by Device Manager were futile because the options were there to do. The purpose of the level crossing was to attempt to circumvent the automatic IRQ assignment in case that is the question, I'm going to.

  Thanks in advance to anyone who can give an idea. Clues or comments are appreciated just to help me to work along, even if we don't find the right solutions. There are quite a few others "hit my 2nd slot, no internet wireless ' sick out there. Hope that eventually you will help all out.

  Hello

  It's probably the shared IRQ that creates it.

  Get a wireless connection of USB you can connect with a USB extention cable and place it over the system and it should work.

  Example, http://www.newegg.com/Product/Product.aspx?Item=N82E16833166022&cm_re=usn_wireless-_-33-166-022-_-Product

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Why can't I change the management VLAN?

  This will sound like a newb question (but I'm used to COS not MISTLETOE), but how to change the vlan management on a SLM2048 and still have access to the GUI switch? The steps I use:

  (1) create a vlan (say vlan 2) / save the changes

  (2) add a non-tagging port (say, g2) to change vlan / save

  (3) change the vlan management to the vlan 2 in gui/save changes

  (4) physically to move my pc on port connection of vlan 2 (g2)

  (5) delete my cache arp (arp - d)

  (6) the switch switch in. ping or log not rspond pings 8 ^)

  What in the world could be missing (outside a few screws)?

  Thanks much for any help!

  
  This is going to sound like a newb question (but I'm used to COS not the GUI), but how do you change the managment vlan on a SLM2048 and still have access to the switch GUI?? The steps I'm using:
  1) create a vlan (say vlan 2)/save changes
  2) add a non-tagging port (say, g2) to the vlan/save changes
  3) change the management vlan to vlan 2 in the gui/save changes
  4) physically move my pc connection to the vlan 2 port (g2)
  5) delete my arp cache (arp -d)
  6) ping the switch or log in. switch doesn't rspond to pings 8^(
  What in the world could I be missing (besides a few screws)??
  Thanks very much for any help!
  
  

  Hello

  Check out the link to change the management vlan in SLM2048 below

  http://www.Cisco.com/en/us/docs/switches/LAN/csbss/slm2024/release/notes/SLM2024_SLM2048_RN_V1-0-1.PDF

  Hope to help!

  Ganesh.H

  Don't forget to note the useful message

• Can deploy us the fusion ADF in logical server web application war file? EAR works only

  I created a fusion ADF application in Jdeveloper.

  When I deploy it as a WAR in integrated weblogic server file. -works fine.

  When I deployed in the file. WAR in stand-alone weblogic server. -.

  It gives me error 500.

  In the console (startweblogic.cmd) ""java.lang.NoClassDefFoundError: oracle, adf, model, RegionBinding "."
  

  Then I found on the internet that deploying any application like EAR would solve. Yes. He has indeed solved. My application works well in stand-alone weblogic.

  Now my question is "can deploy us not like war in stand-alone weblogic?

  The war file works quite well under the integrated form but not in stand-alone. Why?

  PS: I have installed the runtime of the ADF, established the deployment profile to deploy a web application.

  Thanks in advance.

  Dear user,

  ADF applications can only be deployed as an EAR file (actually it's what JDeveloper when you run an application.) It creates an EAR on the fly and deploy it on the built-in WLS).

  Please see Deploying a Java EE Application ADF - 11 g Release 1 (11.1.1.6.0) for more info.

  In the future, can you please provide us with some basic information such as your version of JDeveloper.

  Concerning

  Antonis

• Oracle ADF: How to develop a web application to adf with a team of 10 members

  Hello, we need to develop a web application using Oracle ADF and jdeveloper 12 c. It is a great project as we develop this application with a team of members of dimension 10. Our doubts, this is how we can develop a web application using a team.

  Suppose we have 10 modules. Each module was developed by each Member (each Member is using a different system with the same environment. JDeveloper 12 c). Finally to develop all 10 modules how we can combine all 10 modules in a single application. How we can change the links, the page flow and connection details.

  Help, please.

  Thanks in advance.

  ADF is built for the development team. Features such as the ADF libraries, bounded task flows and nested application modules allow developers to work on separate parts of the project and then merge them into a single application.

  Follow the video that Timo has pointed out and read the section of the documentation on reusable components: https://docs.oracle.com/middleware/1213/adf/develop/adf-web-component-reuse.htm#ADFFD1846

  Regarding version control (and track tasks, make automated etc generations) - an option to consider is the Cloud Oracle Developer Service.

  Here is a demonstration of how you team management version on that app JDev/ADF: by using the Service of Cloud Oracle Developer for Git version for JDeveloper/ADF apps management

• How to add jsession ID to an ADF web application deployed in weblogic server?

  Hello

  I use jdeveloper 11.1.2.4 version. Can anyone tell please how to add custom JSESSIONID (BLTSESSIONID) to the URL of the web application ADF that must be deployed in weblogic server. I tried the following approach. but it did not work for me.

  in webogic.xml, I added

  < session descriptor - >

  < name > BLTSESSIONID < / cookie-name >

  < / session descriptor >

  However, I've added the weblogic.xml manually from the gallery.

  Could someone help me on this please?

  Thank you

  You don't have to add the session ID to the URL. The Web application automatically manages session IDS. By default, it uses an HTTP cookie (a cookie with name JSESSIONID) therefor. The Web application will automatically add it to the URL only if it detects that the client browser does not support cookies (for example, if the user has disabled cookies in the browser). By adding the lines above to weblogic.xml you just changed the name of cookie JSESSIONID to BLTSESSIONID default session. This is useful only if you have access to a couple of different Web applications from one and the same server and you want every application to maintain a clean session (for example, each application having a different session cookie name). If all applications on the server use one and same name cookie (JSESSIONID for example) and you have access to more than one application at the same time in one and the same browser (and even multiple instances of the browser, with the exception of some special cases), you will not be able to work with these applications correctly because the next access to another application will replace the cookie and you will lose the session to the requests earlier. Because HTTP cookies are maintained at the level of server name, it's not at the level of application root. In this case, you must specify the application names specific cookie (what you did above).

  Dimitar

• Development of rich Web Applications with Oracle ADF tutorial

  Oracle JDeveloper 12 c (12.1.2) tutorials - developing rich Web Applications with Oracle ADF

  3.8 step that a change in the Salary field should translate into a auto update, partial trigger, in terms of annual salary after tabbing off the Salary field, but it doesn't. If I do a update for the Salary field and click on the next button, click the back button, I can see the field update of annual salary.

  I use the version of the JDeveloper IDE with the logical Web server and Apache Derby network server - 10.8.2.2.

  Oracle IDE

  12.1.2.0.40.66.68

  I made all the changes or the steps in the tutorial.

  No idea why the automatic update does not work on my system?

  Thanks in advance for your suggestions!

  Hello

  two suggestions

  1 set the property clientComponent on the field of output annual salary to 'true '. Because the field is an element of output text sometimes what makes a client component helps the update.

  2 obtain the completed application to http://docs.oracle.com/cd/E37547_01/tutorials/tut_rich_app/labs/richclient.zip and check if she works there. If this works it then the problem is in your implementation. But then you have a working example to compare with.

  Frank

• Oracle ADF: Could not validate database transactions

  Hi all

  I'm trying to update the oracle database using Oracle ADF command line. The following is an extract from my code

  final String amName1 = "taxreturn.AM_Taxreturn";

  final String connStr = "JDBC: thin: o9ias / [email protected]:1521:t1fdbo;

  	Hashtable env = new Hashtable (2);
  	env.put (Context.INITIAL_CONTEXT_FACTORY, JboContext.JBO_CONTEXT_FACTORY);
  	env.put (JboContext.DEPLOY_PLATFORM, JboContext.PLATFORM_LOCAL);

  ApplicationModule appMod1 = null;

  	try {}
  	javax.naming.Context ic = new InitialContext (env);

  	Home1 ApplicationModuleHome = (ApplicationModuleHome) ic.lookup (amName1);
  	appMod1 = home1.create ();
  	appMod1.getTransaction () .connect (connStr);
  	} catch (Exception e) {}
  	e.printStackTrace ();
  	}

  	ViewObject t1xvVO = appMod1.createViewObject ("t1xvVO", "taxreturn. T1XrefVView");
  	t1xvVO.setWhereClause ("T1X_T1FU_USERID =" "+" testlin2 "+" ' and T1X_T1_TAXYEAR ='"+" 2012"+"' T1X_INVOICE_T1_150 is null and T1X_DELETED is null "");
  	t1xvVO.executeQuery ();

  	Line rowT1xv = null;
  	int count = 0;
  	While (t1xvVO.hasNext ()) {}
  	Count ++;
  	rowT1xv = t1xvVO.next ();
  	}
  	System.out.println ("number of discs:" + count);

  	t1xvVO.executeQuery ();
  	If (t1xvVO.hasNext ()) {}
  	rowT1xv = t1xvVO.last ();
  	System.out.println ("name:" + rowT1xv.getAttribute ("T1FirstName"));
  	System.out.println ("T1xInvoiceT1150: front:" + rowT1xv.getAttribute ("T1xInvoiceT1150"));

  	rowT1xv.setAttribute ("T1xInvoiceT1150", "250");
  	appMod1.getTransaction () .postChanges ();
  	System.out.println ("T1xInvoiceT1150: after:" + rowT1xv.getAttribute ("T1xInvoiceT1150"));
  	}

  	System.out.println ("Dirty is:" + t1xvVO.getApplicationModule () .getTransaction () .isDirty ());
  	try {}
  	appMod1.getTransaction () .commit ();
  	System.out.println ("Commit succeeded.");
  	} catch (oracle.jbo.JboException e) {}
  	System.out.println ("Validation failed." + e);
  	}

  I can see ago total 3 records retrieved. I run the query object view again, and then replace the last record. But after the statement commit, the database is not updated. What's not here? Thanks in advance

  Sheet

  
  

  
  

  For LeafWoods I think the key is to know that you need a British Colombia ADF entity to perform database updates because there is no doDML on the display objects

  Frank