notification vs. rules model

Similar Questions

• Ignoring some notifications of rule

  Hello
  What is the best way to ignore certain notifications. We have a couple of servers that are fireing the rule "VMW Virtual Machine logical drive using" on the disk that is not relevant. How can I exclude this virtual machine and alerts drive?
  Kind regards
  Tom

  The rule may be limited as to completely exclude a virtual machine or a single disc of VMs.
  As Dave pointed out, it is best to copy the rule and disable the original/activate the copy.
  To entirely exclude the virtual machine, you can just broadens its scope as follows:
  VMWVirtualMachineLogicalDisk where (virtualMachine.managedObjectReference! = "vm-xxxx")
  To find your ID moref of virtual machines, follow these steps:
  in the web console vFoglight, go to the tray on the left under the dashboard and expand Administration > tools > Script Editor.
  In the "Script" box, paste the script below:
  TS = server.get("TopologyService");
  Ty = ts.getType("VMWVirtualMachine");
  DS = ts.getObjectsOfType (ty);
  name = "";
  DS.each {computer->}
  appoints += it.get ('name') + ' ' + it.get ("managedObjectReference") + "\r\n";
  }
  return the names;
  It will return the items as:
  LM-SCOM-DW2-vm-38422
  (the red point is the moref for the virtual machine)
  You can then get the managedObjectReference for the particular virtual machine and add it to the scope (vm-xxxx).
  Option 2:
  To exclude only a specific drive to a virtual machine:
  VMWVirtualMachineLogicalDisk where (topologyObjectId! = "xxxx")
  Drive your virtual machine has a TopologyObjectID are assigned and which does not change. So excluding this ID in the field above will allow the rule to shoot all the drive except this one.
  How to proceed:
  1: need to find the ID for this particular drive
  2: change the scope of the rule to exclude the object (as in the example above)
  To find the ID of TopologyObject, in the web console vFoglight going on the set on the left under the dashboard and expand Administration > tools > Script Editor.
  In the "Script" box, paste the script below:
  TS = server.get("TopologyService");
  Ty = ts.getType("VMWVirtualMachineLogicalDisk");
  DS = ts.getObjectsOfType (ty);
  name = "";
  DS.each {computer->}
  "appoints += it.get("virtualMachine").get ("name") +" "+ it.get ('name') + ' ' + it.get ("topologyObjectId") + ' \r\n ';
  }
  return the names;
  This will return the list of virtual machines with the drive name and topologyObjectId as follows:
  LM-TestMachine D:\ 20369
  LM-TestMachine F:\ 20371
  LM-TestMachine C:\ 20367
  You can do a search in the browser window to find the name of your virtual machine to make it more quickly because it goes to a list of all virtual machines and their readers.
  When you find the reader looking for copy the topologyObjectId which is the number at the end (for example...) LM-TestMachine D:\ 20369)
  When you get that go to the plateau left and again under the dashboard and directors develop rules & Notifications > manage rules. 'Filter by rule name', enter 'logic' (w/o "") and then click the rule of VMW Virtual Machine, use of logical disk.
  Once it opens, click on the tab 'Definition of the rule', in the 'Field of application of the rule' box, you'll add the following (like at the top):
  VMWVirtualMachineLogicalDisk where (topologyObjectId! = "xxxx")
  The "xxxx" is of course the value you obtained for the topologyObjectId readers. Once it is in place, click the green check mark to evaluate the query scope.
  
  HTH!
  -Larry

• Limits of notification DFSR by model

  My global notification settings send notifications repeated every 120 minutes.
  I have two models, apples and oranges. The apples model uses the default limit of notification of 120 minutes. I would like the model of oranges to send notifications repeated every 60 minutes.
  What is the syntax of the command I should use to define repeated notifications occur every 60 minutes only for the Orange model?

  I use Windows server 2012R2

  .

  Thank you
  Gary

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unrecognized in Excel Docs membership rule.

  Hello

  I have defined a membership rule in a WORD doc and try to use the same relationship (used in the membership rule) to define the scope of an entity in the EXCEL doc.

  But it throws an error that "function not supported. This function cannot be used in rules modeled with EXCEL.

  Please help me with an alternative solution.

  Any suggestion is welcome.

  Essentially scope functions (everything that has an alias as a potential parameter) do not have a metaphor for representation available in Excel matching rule and are therefore not supported. However the other functions of the entity are supported (exists, forall, instancecount etc.).

  According to the request of Andrew: If you can explain what you're trying to do (and why do you think Excel is the best option for this) then we can help.

  But yes: some things cannot be done in Word.

• Where are models of certificate E-mail?

  Hi guys,.
  
  I learn about the certification process, and according to the documentation, e-mail notifications use these models:
  
  ' + The following e-mail notification templates are available: + ".
  
  + Reviewer to notify certificate: used to send e-mail when a certification task is assigned to a reviewer. +
  
  + Inform reviewers delegates: used for sending e-mail to reviewers when a statement of task is delegated to them. +
  
  + Inform rights certificate denied: used for sending e-mail to users of the process owner group if a reviewer refuses any payment. +
  
  + Certificate examiners with no Defined E-mail: used to send e-mail to users in the group owner of the process if an e-mail address is not set to one of the reviewers. + »
  
  However, I don't see this pattern in the Administration and the user Console > advanced > system management > Search Templates of Notification. Where can I find it?
  
  Thanks in advance,
  
  Turus
  
  Published by: Turus February 10, 2012 08:28
  
  Published by: Turus February 10, 2012 08:28

  You can find it in the console design

  -> Design-> Process Management Console-> e-mail definition find these model

  If you do not configure the console design. follow link below
  http://fusionsecurity.blogspot.in/2011/04/configuring-design-console-for-OIM-11g.html

  -nayan

• How to assign approvaal policy to a demand in OIM 11 g model

  When I ask resource in OIM 11 g, it always goes to default approval of xelsysadm.
  
  I want that this request for approval of level has to go to "approval of the Director of beneficiary. While asking I select model application (that I created) for the resource of provision as the request type. I already have 'Approval of the Director of beneficiary' like approval level for this model of application requests.
  
  
  I created a policy on the approval, how can I assign this policy to the query pattern approval so that when I submit this application, he should go to my manager's approval.
  
  
  Kind regards
  J

  Please follow the steps I mentioned above.

  Don't select any approval when creating model to ask with the name "XYZ" of the available resource Type
  Policy on the approval of the level ask to create and make the name of rule approval template == "XYZ" and select your approval workflow say approval of recipient Manager
  Create the policy on the approval of the level of the operation and that the approval rule model name is "XYZ" and select "* AUTO APPROVE."

  Increase demand by using the XYZ model
  To test and let me know the results.

• 6.7 How to create emails for critical alarms

  Hi all

  is there a step by step doc to achieve? I'm looking for, but not really find what I need.

  Thank you.

  You would add an action send to the critical part of the rule.  A quick example is at https://support.quest.com/SolutionDetail.aspx?id=SOL96619

  a. go in "dashboard |" The administration | Rules and Notifications. Rules. "
  b. click the rule to modify.
  c. develop any level of severity. Click the Action tab.
  d. Select "EmailAction" in the Action drop-down list. Click the Add button.
  e. change the defaults as requires it:

  as examples:

  f. click on the value of the mail.message column.
  On the popup window that opens, click on the "User Defined" tab, and enter the alarm message.

  g. click on the value of the mail.recipient column.
  On the popup window that opens, click on the "User Defined" tab and enter the e-mail address in the following format:

  myemailaddress@@domain.com

• How to change the threshold value

  Hello

  I want to change the default threshold my threshold of space available on the VM disk... Please share the document

  Kind regards
  Gopi

  Hey Gopi,
  If I understand correctly, you want to adjust the thresholds for alarms.
  The Foglight registry has all these variables. We recommend that if you change something, you take note in the variable about which was the default, time, reason, etc.
  In the dashboard:
  The administration | Rules & Notifications | Manage the registry Variables
  In addition, you can change the rules. If you want to change the rules, please COPY the rule and disable the original rule. Make changes to the copied rule.
  In the dashboard:
  The administration | Rules & Notifications | Manage rules
  VFoglight documentation is available if you connect to the site Vizioncore, go to the Downloads tab and then select the content sub-tab.
  If you have a more specific question, please just after it.
  Thank you
  -dave

• Latest patch day updates (Dec. 8, 2015) beat display for nxclient

  I use nomachines nxclient 3.4 for 5 years, but the last update broke the link to the display.
  I used system restore to go back to the previous state and the connection was there again.
  Then I tried the same process with the same results.
  So there is something in the last update that prevents nxclient to display a view.

  Connect to my remote computer works fine until the last step where nxclient says 'connection property screen '.

  nxclient starts and shows an entry in the taskbar, but the window does not appear.

  Here are the last lines of NXWin.log

  Error opening of security policy file/usr/X11R6/lib/X 11/xserver/SecurityPolicy
  (EE) No configured primary keyboard
  (==) Using the default values of compiletime for keyboard
  Names.keymap = (null) rules model = "xfree86" = "pc101" Layout = "we" Variant = Options "(null)" = "(null)".
  Impossible to load XKB keymap, fall back to pre - XKB keymap
  Could not init font path element/mnt/NX/fonts/base /, removing from the list!
  Could not init font path element/mnt/NX/fonts/misc /, removing from the list!
  Could not init font path element/mnt/NX/fonts/Speedo /, removing from the list!
  Could not init font path element/mnt/NX/fonts/Type1 /, removing from the list!
  Could not init font path element/mnt/NX/fonts/75dpi /, removing from the list!
  Could not init font path element/mnt/NX/fonts/100 dpi /, removing from the list!
  Could not init font path element/mnt/NX/fonts/TTF /, removing from the list!

  Fatal server error:
  could not open default font 'fixed '.

  Updated to December 8. 15:30

  It took me almost a whole day of work to drill down to the patch only the origin of the problem.

  It's kb3109094 that breaks the display of the Xclient.

  Please Microsoft fix it.

  The whole process to find the cause of the problem is very time consuming and it grew to 2 questions for me:

  Q1. Why can't I just download the patches that my system also wants to without automatically installing them?

  (It takes around 20 minutes up to an hour for my system to manually check the status of patches and it is a redundant process, if I want to only install a subset of the fixes shown only once)

  After I manually downloaded the necessary KBxxx.msu patches one by one, I also had to install one by one.

  Q2. Why is there no GUI option to select a bunch of patches in a download directory and install them at once? (don't forget to set a restore point before installing)

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you are facing problems using Nxclient.

  I suggest you to post your query on our TechNet Forums social as this question right here.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

  Thank you.

  Sincerely,

  Ankit Rajput

• Monitoring of the physical OS - Ruleset

  Hello!
  I activated the physical Cartride of surveillance of the OS and I want to look at the rules for the alarms of this cartridge (and change something, for example plan, Message,...). Unfortunately I can't see the rules under Administration / rules & Notifications / manage rules. Where can I finde these rules?

  Thank you!
  Markus

  Have you tried clicking the "Refresh" link in the upper right the rules page?

• How to set the email address of OIMINTERNAL

  Hello

  process tasks that allows notification (in the Console Designer) to set mail to be sent to the user, the applicant or assignee.

  The applicant and the transferee are often user OIMINTERNAL so I put his mail attribute.

  I tried directly on the database (USR. USR_EMAIL) but it was not a good idea

  A better idea?

  Hello

  Do not use the user OIMINTERNAL for any kind of change or for notifications.

  Since you use OIM 11 g, then why are you using the Notification process tasks. This notification uses old models 9.x and not a good option. I will suggest best to use new models and to call on the success of your tasks.

  This will make your workflow of notifications very easy and you can get many scenarios.

  For info: http://fusionsecurity.blogspot.in/2011/07/oim-11g-notifications.html

  ~ J

• Need to customize LOV in OFA page

  I have a requiremnt to change a LOV in a page of the OFA.
  
  Query current LOV is like that
  
  SELECT * FROM (SELECT WU.NAME AS NAME, WU. DISPLAY_NAME, WDP. ORIG_SYSTEM, WU. WU WF_ROLE_LOV_VL, WF_DIRECTORY_PARTITIONS WDP EMAIL_ADDRESS WHERE WU. ID_PARTITION = OF THE WDP. Id_partition) QRSLT WHERE (ORIG_SYSTEM in ('FND_USR', 'PQH_ROLE',: 1) ORDER OF DISPLAY_NAME;
  
  
  I do add a condition name not like ' % @%.
  
  
  Kindly let me know how to achieve this.
  
  
  Thank you

  1. where should I keep the file of the controller in the system? (so what change should be done on the path as well)

  You can create it in a way custom as at the last you will be specifying the path on the personlizing page it.

  2.i can see that this CO is also using some other LOV... I don't want to change the other LOV

  There is no need to make that you can make your changes and then call super to call base controller.

  3. also I find that this VO uses several places, but I can find different queries

  What do you mean by that... When make you changes in the controller then reflect these changes on this page only in which resides this controller.

  4 iProcurement Super User > Notifications > holiday rules > rule response

  Try to run the query and check if find any update error thread

  Thank you
  AJ

• Observation of facility takeover

  Hi, since I am new to the OPA I did some research to date and is seeking opinions on my results:
  1 OPM is installed on the client side. It is used for model modules. This rule base is then deployed to the detemrinations of Oracle Server as a zip file. Correct me if wrong of the Iam.
  2. I installed Siebel CRM 8.1.1 and I would like to integrate with Siebel OPA. Finding.
  3 OPA consists of: Oracle Web server of Oracle and Oracle determinations determinations engine determinations. OPA Runtime Setup Guide there are chapters describing the Oracle Web deployment and Server Oracle determinations determinations, but there is no installation procedure describing Oracle determinations engine. Can you share your thoughts on this.
  4. do our implementation for Apache Tomcat installed as an application to integrate the engine? Please answer on that.
  5. I guess I'll have to install Oracle OPA Siebel Connector. Please confirm.
  6. Please confirm next: in the 'old' Concept of authority of Haley, there is knowledge that has been kept in sync with the repository of Siebel and application client-side wasn't working on this knowledge base. Now, in the concept of the OPA, the OPM seems to be "dicsonnected' of the Siebel Application. First connection with Siebel is when mapping entities setting up Siebel connector. Did I understand this concept?
  7. can you describe the development of one modules: rule is modeled in OPM, then as a .zip is deployed on the Oracle Server detemrinations... What should do us next in order to integrate with Siebel and run in Siebel.
  
  Thanking you in advance
  
  rgrds
  
  Milan

  Hi Milan

  Looks like you have quite correctly OPA. A few answers to your questions:

  1 fix
  2. you can use the OPA for Siebel connector or the generic integration of web services on the server of determinations OPA
  3. the determinations Oracle engine is deployed automatically as part of an installation of determinations Oracle server or Oracle Web determinations (or Oracle Policy Modeling)
  4. Yes
  5. the OPA for Siebel connector is optional, but highly recommended if you integrate with Siebel
  6. the old Haley Authority was tightly coupled with Siebel, OPA is deliberately loosely coupled with Siebel to make it much easier to reuse rules as an asset of the company, not only within Siebel
  7. after rule modeling, you need to add the properties file in the Oracle strategy modelling and assign public names to all the attributes that you want to integrate with Siebel. The connector of the OPA for Siebel Setup Guide (http://www.oracle.com/technology/products/applications/policy-automation/pdf/Oracle%20Policy%20Automation%20Connector%20for%20Siebel%2010.0%20-%20Installation%20guide.pdf) and the developer help (http://www.oracle.com/technology/products/applications/policy-automation/help/sbl10/Default.htm) cover the rest of the steps in detail.

  See you soon

  Anthony Bettanin | Director, Global Partner Enablement, Oracle policy Automation | Oracle global alliances & channels
  Office: + 61386163683 | Mobile: + 61434832564 | 417 St Kilda Road, Melbourne, Australia
  Area to OPA knowledge: http://www.oracle.com/partners/en/knowledge-zone/applications/042908.html

• Watch a rules and model box simultaneously in Firefox 20 Inspector

  I've upgraded to Firefox 20 and now my Inspector is confined to the lower part of the display in an iFrame that I can get out.

  In previous versions, I could open the rules CSS and visualization of box model at the same time. This was one of the main reasons that I considered the Inspector Firefox superior to those of opera, Chrome and Safari.

  I can't seem to find a way to do it now... what I have to click between the box model and the rules or is there a way to get back to the old route of the inspector or one that is better that way?

  I'll encode an add-on if I do this thing to work.
  Very disappointed that Firefox deleted their old default Inspector view.

  Yes, you can open open a tab at the time in the left pane (you will also get a tab fonts).

  There will be a lot more tools added to the inspector window in the future versions of Firefox and by opening all the windows could reduce the screen available for the web page for next to nothing.
  
  So that's how it goes, and you will have to pay.

  • http://blog.Mozilla.org/UX/2012/10/coming-soon-the-Firefox-Developer-Toolbox/

• How to configure a notification by e-mail for a rule (using Fogight 5.6.10)

  How to set up a notification by e-mail for a rule.

  The out come would be as follows:

  Send an email (to a group of e-mail) every Friday at a specific time.

  Hello

  Just to check, you want to set a rule that sends just a message/email to a group of send Fridays at a specific time?

  If so, first set you a schedule for the time, under administration > schedules > add a calendar

  Set the start time and end time or duration

  

  You can then define a calendar rule (you can set to allow no data and no application range if necessary).

  

  and this rule action to send e-mail to a list (or e-mail alias).

  I hope this helps.

  Golan