Notifications in iOS does not?

Similar Questions

• 10 iOS does not well at all. Notes is much harder to change more before. The start screen is so clumsy. How can I get rid of all the widgets of the splash screen?

  10 iOS does not well at all. Notes is much more difficult to edit with touch screen as before. How can I erase my start of all the widgets screen? I might want to go back to iOS earlier.

  "How can I erase my start of all the widgets screen?" is the only question that you asked, so here's the answer:

  Some widgets may not be deleted, but you can move the widgets that you use most on the front screen and keep the ones you don't want a rear screen. Or, you can take the widgets you want and move them to a single folder.

• BBM BBM on ios does not work since last Friday

  BBM on ios does not have since last Friday... I cannot send any messages and also I get no msgs.

  for me or for everyone.

  BBM on iOS started working...

• Client VPN router IOS does not connect

  Hi all

  I'm having some trouble of Client VPN connection over the internet to our Cisco IOS router. Some help would be very appreciated!

  On the VPN client log I get the following error messages:

  ---------------------------

  ...

  573 16:32:13.164 21/12/05 Sev = WARNING/2 IKE/0xE3000099

  Size invalid SPI (PayloadNotify:116)

  574 16:32:13.164 21/12/05 Sev = Info/4 IKE/0xE30000A4

  Invalid payload: said length of payload, 568, not enough Notification:(PayloadList:149)

  575 16:32:13.164 21/12/05 Sev = WARNING/3 IKE/0xA3000058

  Received incorrect message or negotiation is no longer active (message id: 0x00000000)

  ---------------------------

  We get debugging on the router that I'm trying to connect:

  ---------------------------

  router #debug isakmp crypto

  ...

  21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): received 203.153.196.1 packet dport 500 sport 500 SA NEW Global (N)

  21 Dec 16:32:16.089 AEDT: ISAKMP: created a struct peer 203.153.196.1, peer port 500

  21 Dec 16:32:16.089 AEDT: ISAKMP: new created position = 0x678939E0 peer_handle = 0 x 80000031

  21 Dec 16:32:16.089 AEDT: ISAKMP: lock struct 0x678939E0, refcount IKE peer 1 for crypto_isakmp_process_block

  21 Dec 16:32:16.089 AEDT: ISAKMP: 500 local port, remote port 500

  21 Dec 16:32:16.089 AEDT: insert his with his 67B0AB34 = success

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): treatment ITS payload. Message ID = 0

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): payload ID for treatment. Message ID = 0

  21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): payload ID

  next payload: 13

  type: 11

  ID of the Group: eggs

  Protocol: 17

  Port: 500

  Length: 12

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): peer games * no * profiles

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 215

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is XAUTH

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is DPD

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 194

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 123

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is NAT - T v2

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is the unit

  21 Dec 16:32:16.089 AEDT: ISAKMP: analysis of the profiles for xauth...

  .....

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 12 against the policy of priority 3

  21 Dec 16:32:16.093 AEDT: ISAKMP: 3DES-CBC encryption

  21 Dec 16:32:16.093 AEDT: ISAKMP: MD5 hash

  21 Dec 16:32:16.093 AEDT: ISAKMP: group by default 2

  21 Dec 16:32:16.093 AEDT: ISAKMP: pre-shared key auth

  21 Dec 16:32:16.093 AEDT: ISAKMP: type of life in seconds

  21 Dec 16:32:16.093 AEDT: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): pre-shared authentication offered but does not match policy.

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

  ---------------------------

  You can apply the encryption the WAN interface card and check?

• Call Forwarding 9.3.1 ios does not work

  After the update of ios of 9.3 to 9.3.1 WHAT CALL FORWARDING does not work

  Call forwarding is a function of carrier. Contact your operator.

• Droid 2 Global Notification LED light does not.

  I bought my phone about 3 months ago and a few days ago the notification light has stopped working. It does not work for text messages or low battery, basically he "burned." I tried a factory data reset and still no go. I was thinking about warranty replace the phone but I do not do this for some reason. Any ideas or is it fried? I know that I have all the apps that would make it only works do not, so I'm stuck between the hammer and the anvil.

  I discovered what happened, apparently someone else who had the same problem found out that it's a wire loose which caused the problem, and you can warranty replace it. I hope just as if I do I don't have the same problem a month later.

• The electricity in the Notification area meter does not work in my XP laptop.

  Original title: XP battery meter does not work.

  KIM I have Windows XP Professional 64-bit on my laptop. The battery meter in the notification area will not work. It shows that it is connected. I changed the profile of laptop computer power and nothing. The laptop came with Windows 7 Home Premium. Please do not ask me why I went to XP to 7, because who does not help me. How can I fix the battery meter? It worked until I installed my graphics driver, I don't understand why it does not work now.

  Thank you
  Mike
  HP G62-225DX 4 GB Ram 2.3 GHz Dual Core Pentium 4. 250 GB HARD DRIVE.
  XP Pro 64

  Hi, Mike

  Thanks for posting in the Microsoft Community.

  I'm sorry to hear that you have problem with the Power meter on your Windows XP computer. I would like to know more information, so that we can help you better.

  1 - is this problem started after the installation of Windows XP?

  2. do you get any error code or error message while starting?

  Let us try the following methods; I'm sure this will help you to solve the problem.

  Method 1:

  Run the fixit in the following Microsoft FixIt.

  The problems of power consumption and extend the life of laptop battery:

  http://support.Microsoft.com/mats/windows_battery_power_settings

  Method 2:

  Try the steps in the following Microsoft article.

  How to display and use the icon "Power Meter" in the area of notification in Windows XP:

  http://support.Microsoft.com/kb/909606

  Please reply with the status of the issue, so that we can better help you.

• Hash MD5 for PIX515 IOS does not match check

  I've recently updated our firewall PIX515 release 7.2.2 to 7.2.4 and I wanted to check the hash MD5 for the downloaded IOS. However the hash generated on the PIX using the verify command does not match the hash that is published on the website of download of cisco. Published f2f6b88ea1b4a0b33045b3b18d0fb852, generated hash hash is fdcd... I checked the MD5 7.2.2 on a firewall, I have not yet updated and does not correspond to either. Am I missing something?

  OK, so you've downloaded an intermediate version - 7.2.4 (30), instead of the main exit of 7.2.4.

  7.2.4 checksum (30) is correct and corresponds to which advised you earlier: fdcd3a9d884baf0ec0aad78048f0e441

  You can check it out here:

  http://www.Cisco.com/cgi-bin/software/tablebuild/doftp.pl?ftpfile=Cisco/internal/special/ciscosecure/PIX/pix724-30.bin&app=tablebuild&status=showC2A

  Hope that clarifies the confusion.

• Applications for iOS does not work after update from cli 6.3.0

  After an update on August 3, when the Service of Build upgrade cli 6.3.0 my apps did not work for iOS, I have an iPhone 4 running iOS 7.1.2 and an iPad running iOS 9.3.3. After the build service update, no matter if I specify a lower version of cli, on the iPhone he asked a more recent software when I try to install from iTunes, but the iPhone and iTunes running on the latest version. On the iPad it installs, but the application icon does not appear on the iPad, so I can't access the application.

  Everyone knows a similar problem? I tried to look for documents but did not find any significant syntax change that could cause the problem. I even did a restore on my code (I had an old version of the compiled application and it worked, then I did a restore to this date on my code) and it does not work yet.

  ryanskihead not really, we test with 2 models, an iPad 2 running iOS 9.3.3 and an iPhone 4 iOS running 7.1.2 in both cases, the application does not, but the behavior is different:

  -On the iPad it installs successfully on iTunes, but the icon does not appear on the iPad

  -On the iPhone it says that it can not be installed because it requires a newer version of the iOS, but the iPhone is running the latest available version of iOS.

  If I specify a deployment target, say iOS 7 for example, it doesn't do anything on the iPhone. This and a similar thread I've seen on the target community deployment cli 6 ignorant, I would say that there is a bug with phonegap cli 6 + versions used on the Build Server.

  The problem now solved in time by doing a restore to phonegap cli 5.2.0, TI began works fine after that, so I don't know if there is a bug on higher versions of cli phonegap or there is a syntax change not yet published on config.xml

• E-mail notification of workflow does not

  Hello

  We need to inform all users of the workflow. There is no 'NotifyAllParticipants' in Admin-> Actions-> Actions step workflow. But users don't receive any notification by email.

  Is there a required configuration?

  We tried to modify the futuretense.ini also, but it still does not work.

  Any help in this matter is appreciated.

  Thank you!

  Hello

  I tried this in my local machine and am able to send the notification to the participants (users).

  Check if you set the following properties.

  First of all:

  In futuretense_xcel.ini file set xcelerate.emailnotification = true.

  Second:

  Set the following properties in the futuretense.ini file.

  DSI EmailAccount = specifies the user account name that you want to use for outgoing mail. Is the name of the account (just the username) on the SMTP server.

  CS.emailpassword = specifies the password for the e-mail account used by the WebCenter Sites (specified by cs.emailaccount above property).

  DSI EmailHost = defines the host SMTP (mail server) which is used by the servlet ContentServer to create and deliver e-mail messages.

  CS.emailreturnto is specified, the e-mail address from which mail is sent to all participants in the workflow.

  Note: by setting the properties make sure that 'no. spaces' before and after the value.

  If above properties are set correctly, still no mail. Thanks for upload your Sites.Log.

  Please let me know if you have any questions.

  Kind regards

  Delphine Pilli.

• App Keynote iOS does not work since the last update

  App Keynote has been updated in May 10th but never completed installation. I tried to uninstall it but when I impulses the X button, nothing happens. I restarted my iPhone but Keynote does not open and I can uninstall either. The icon is now hidden

  

  Hello

  I guess that you do not have a computer

  Launch iTunes and connect the iPhone to a computer.

  Click on delete > > Sync > > apply.

  

  Keynote address will be deleted from the iPhone.

  Back to iTunes on the computer and try again to install Keynote.

  Click on install > > Sync > > apply.

  

• AQ notification callback procedure does not. It's going to the exception queue

  I use: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  I recorded in my prior queue of callback procedure, but it does not work once I recompiled the procedure according to the AQ$ _AQ_SRVNTFN_TABLE_1_F, It's going to the exception queue.  How can I find why it is wrong to the exception queue?

  Select * from SYS. USER_SUBSCR_REGISTRATIONS;

  303

  ""ALERT_Q"

  PLSQL://callbackEnqueueIndvl

  57

  FF

  1

  AQ

  DEFAULT

  DB REG

  0

  MAY 22, 14 12.17.05.375385000 PM - 04:00

  Select * from AQ$ _AQ_SRVNTFN_TABLE_1_F by enq_time desc;

  AQ _AQ_SRVNTFN_TABLE_1_E $

  AAISqUAACAAAFh3AAQ

  F93D79F05F030F5DE043134C100A2FFE

  0

  3

  MAY 22, 14 12.26.23.237482000 PM

  3.20.92125

  5

  AQ_SRVNTFN_TABLE_Q_1

  0

  0

  0

  0

  0

  [SYS. [AQ$ _SRVNTFN_MESSAGE]

  PERSISTENT

  0

  0

  2173603

  Thank you.

  Hello

  Check if there is no qmon, j00 * follow-ups generated around the same period.

  Thank you

  Renu

• Notifications for SMS does not not on iOS10

  I've just updated to iOS10 today and now all of a sudden my notifications to the texts do not come through. Previously, my text messages would cause my phone vibrates and turns on the home screen, where I could read the message. Now, I only get a notifcation of vibrations, nor my screen is lighting up. None of my settings have changed. Can anyone help?

  Hey manandaca,

  I see that you have updated your iPhone 6s more iOS 10 and are running in unexpected behavior of your message notifications. The first action that we should take to this issue is to check your notifications settings to ensure that the settings reflect the notifications you want to receive Messages from your app. Here is a link to our help article that will help you to locate and edit your notifications for your Messages application settings:

  Manage notifications of message and privacy - iPhone

  Thank you for reaching out to us in the community of Apple Support and let us know if you need additional assistance.

• iCloud 9.3.1 iOS does not

  Hello

  after update to iOS 9.3.1 I'm not able to backup to iCloud with iPhone is

  some suggestions?

  TKS

  How much space do you have?

  You can also try - iCloud - backup - backup now to force a manually settings

• 9.3.1 iOS does not install

  I have the new iPhone SE. Although iOS 9.3.1 has automatically downloaded, it will not be installed. Should I do to get the update to install?

  It would be useful that you have described what is happening when you try to install the update, but without more information, I recommend a forced reboot, and then try again. Press and hold the home and sleep for about 10 seconds until the Apple logo appears on the screen, then release the buttons.