Droid 2 Global Notification LED light does not.

Similar Questions

• Police Segoe UI Light does not

  Segoe UI Light does not work in Firefox 8 when you use it in CSS.

  You may need to use additional selectors to get this specific light family group Segoe UI font.

  See this for an example on Arial.

  • [797446/questions/797446]

• Satellite M30: Wireless light does not come

  My wireless on my laptop light is not.
  I switch wireless enabled but the light does not come and my router is turned on.

  Also, I can't check the local networks.
  Could someone help me identify this problem?

  Hello

  The wireless network card is properly installed and listed in Device Manager? To check first please all NICs.

• power light does not not on my desk

  I have a desktop pc hp 6740f, the led power does not turn on but pc works well, wanted to know if there was a quick fix for this?

  N ° unfortunately, there is no quick fix for this. Disassembly, inspection and replacement of the led and the section of the harness which connects to the motherboard header would be necessary.

• PPP light does not blink

  The ppp of light does not illuminate & cannot connect 2 sites only 2. Always have access to all other Web sites & email. What can I do to fix this?

  Hello

  These websites is secure? You did changes to the computer?
  What Internet browser do you use?

  Method 1.
  For modem problem, you can contact the modem manufacturer. As far as websites are concerned, I would ask to add these sites to the zone of confidence and check.

  Method 2.
  a. If the problem persists, I recommend allows you to optimize the internet explore.
  See the article below for steps optimize internet explore. Also check if you can access these webistes in mode without modules if you have Internet Explorer 7 or above.
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How reset internet Explorer?
  http://support.Microsoft.com/kb/923737
  IE reset warning:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.

• "Accu full, 100%" but the green light does not illuminate.

  Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

  No idea why - and how to fix it?

  Thank you.

  Hello

  What brand / model of the laptop?

  If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
   
  See the link, then run the Fixit.
  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
  Method 2:
  
  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

• HP Pavilion 15p189na: Mute light does not

  The led of the button mute on my HP Pavilion 15p189na does not work. I use Windows 10 64-bit operating system.

  BIOS Version/Date Insyde F.11, 08/07/2014

  Processor Intel Core i5-4288U CPU 2.60 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors

  This light was absoloutely work very well, but one day it suddenly stopped working. Good news is that mute the button still works fine but the dead ID light.

  Your help will be much appreciated

  Hello

  Try to download and reinstall the software Realtek HD Audio package on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

  During the re-Setup has completed, restart the laptop.

  Kind regards

  DP - K

• BlackBerry Q10 how long Q10 notification LED light flashing?

  My led notification Q10 begins to Flash when a call, e-mail or any comes, but after about 15 minutes, it stops flashing. My previous is 9700, its LED keep flashing until you read or checked the notification. Because this useful when we expect important electronic or event you can email come in after leaving your phone for a while. I tried to enter the top 30 seconds button, I think it is not the way and does not work for me. So I was wondering, how long the LED is supposed to Flash on Q10? and is this normal?

  The LED on all BB devices always expired after about 15 minutes or more. I got the 9700 and it expired for me, as well, so I don't know why you say it's different on the 9700.

• MWI light does not illuminate

  I use CCM3.3 (5) with the 4.0 unit (5) MS Exchange.

  I had Setup for failover of the unit and worked well. but I can't get the MWI switch work. The phone is able to compose the MWI extension, I opened the port status monitor and update the status of the MWI, I see that the port is 'component the MWI', but the light comes on.

  I followed the guide MWI, troubleshooting and the notifier showed code "12" and the task is complete. But in the newspapers of Miu, I can't find the command SetMWI. I changed the message to be always urgent in subscriber > Message, the led always lights.

  Any thoughts?

  Thank you

  When you manually dial MWI or disable the phone number, it turns the light (or turn off)? You said, he does not fast busy...

  Now, in the traces, look for dd = "1234" where 1234 is your MWI on or off number...

  This is where you should start. It will tell you what partitions it is looking, in the analysis of the figures etc... If all goes well, he will tell what is happening. Feel free to post the tracks here.

  Info that you have given us, it looks like a MAC problem.

• Pavilion Elite m9500y: indicator light does not illuminate

  Start button / stop is pushed to market, the fans begin to turn, but the power button the led does not light (usually blue when on, orange when it is idle), and nothing appears on the monitor (which goes to sleep). Computer is around 3 years. Any ideas?

  Try a reset, works "sometimes". Unplug the appliance, the power button for about 30 seconds. Reconnect the power cord and see if any difference.

• Re: Portege M800 - light does not

  I have a Portege M800 and the lights to the right of the power button won't turn off - even if the machine is completely turned off and unplugged from the power supply cable.

  I tried updated of the VAP and BIOS of downloads and have used the BIOS to turn off the power of LED lighting and tried to use Dimmer.EXe.

  They all turned off light Portege itself and the light above the touch pad, but not the 6 lights to the right of the power button.

  Can anyone help?

  Thank you.

  Hello

  Firstly, it must ensure that the latest version of the BIOS is installed.
  If you are using the latest version of the BIOS, then try this:

  Please, remove the battery and unplug the AC adapter.
  Then wait some time, two, three hours.
  Then reconnect battery and AC adapter.

  Check the BIOS settings (set by default)
  After this attempt to activate or disable the new lighting

• Camileo h10 flash or movie light does not work

  Hey,.
  Does anyone have any ideas as to why flash does not work on my h1o camileo camcorder. ? or the pilot light.

  Thank you

  Neil

  Please help somebdoy!...

• Board color settings (global, shadows, etc.) does not?

  Can I use the color Board and change the different settings very well, but for some reason, it does not show me the degree and the percent at which each setting is set to.  For example, I can move the global setting, but it shows me the number that corresponds with how I've moved.  I feel there is an easy solution to this, but someone can help me?  Thank you.

  PPull down the separator between the Inspector and the timeline.