NoValue in the channel of smoothing

Similar Questions

• Airport utility does not support my Airport - options to change the channel?

  I have an older Airport - extreme, I think, and the utility does not support.  I'm out of luck to change channel?  Time Warner said their modem did not support my newest Airport (? it's TWC) and now the internet keeps smoking at least once or twice a day.

  I suggest that you keep it simple.

  Your airport automatically analyze and choose the best channel to use when it lights up. So, if you have not done for some time, powering to the airport, wait a few seconds and then put it to the top.

  Even if you could change the channel... How would you know which channel to choose?

  Time Warner said that their modem did not support my most recent airport

  Time Warner will only support for a product they have received for you.  But this does not mean that a router from Apple will not work with their service. I've used Apple products for over 10 years with Time Warner.

• How can I change the channel of update?

  I want to return to the channel updates; currently on beta channel. I'm unable to implement your instructions online (apparently stale): https://support.mozilla.com/en-US/kb/how-do-i-switch-update-channels

  Please notify. Thank you, Allan Leonard

  Just download the version you want to use and trash the current version to remove it.

  Download a new copy of the Firefox program and save the file on the desktop DMG

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Toshiba 46TL938G hangs suspended 20 seconds the channel volume or entry

  Hello

  I recently bought a Toshiba 46TL938G. When I turn it on and try to do something the system hangs for about 20 seconds, a large rotating circular icon appears in the upper right of the screen (as if it is make a departure upward and informing me that I have to wait) then everything works fine.

  It's very frustrating because it only seems to happen when you try to do something like change the channel/volume/AV input. For example if I turn on my TV and leave it for 5 minutes, it will sit just idling on the program that is on.
  But the second I try to change the channel/Volume/entry/go in menu it freezes for 20 seconds, then do it of thing and let me go in my life.

  All the world is the experience and knowledge of a fix? The firmware on my TV says it's up-to-date.

  Have you tried to reset the TV?

• Capsule - save the channel selection

  Hi guys.

  I have Time Capsule 3 to with 7.7.3 firmware.

  If I change 'Radio channel Selection' to 'manual' mode and adjust the channels that I need and press the "Update" button - after devices it still restarts use automatic channel selection. Is a way to fix it?

  Thank you!

  Where do you stand in the world? It is Europe that has this problem.

  And I need to the right of the box model number, as that will include your area code.

  There are tougher laws to prevent people setting illegal channels in your area... so if you put a country with different laws of yours and set a wireless channel that is not legal in your area, the TC will close without applying the changes.

  Apple seems to have anticipated this rule change and still 2 years ago put in work in the 7.7.3 firmware.

  Test it using only 2.4 ghz, then set it to channel 8 as a channel that is legal everywhere... let alone 5 GHz for now... it works?

• Sort the channels in Toshiba 47L7453DG

  Hello

  I recently bought a new Toshiba 47L7453DG TV and I tried to sort the channels, but it was impossible. I found in the user manual, the following note:

  "Renumber, move, sort, and delete functions are not available for the antenna channels. Renumber, move, sort, and delete functions are only available for the DVB - C in Germany. »

  However, as I read in other posts, Toshiba recommends the use of this software (version 1.04) ToshibaEdit.

  I followed the steps described below:

  1. I transferred the list of channels of TV on USB
  2. I have compressed files
  3. I opened the in ToshibaEdit
  4. I reorganized the channels
  5. I saved the zip file
  6. I unzipped the files to USB
  7. I transferred files from USB to TV

  So far so good. However, although the list of channels is changed, the TV shows 'No signal' message across all channels, and I have to re - set my TV or load the original files that were exported from the TV (the first time).

  Have you already tested ToshibaEdit L74 series? I saw a similar post somewhere on this forum and a user had the same problem, but you have not proposed a solution. What seems to be the problem after you have saved the files in ToshibaEdit? I followed all the steps exactly as described in the manual here, hereand here.

  Please for more help I've been banging my head for 3 days now and I can't find a way to sort the list of channels, which BTW, is a very basic feature for all TVs.

  PS. I upgraded TV for the last firware (T8_1_97_09_01_1).

  Best regards

  Recovery of the subject.
  I have the same problem on the same model.

  Maybe somebody has already invented how to sort strings?

• How to change the channel of my SONY HDR-CX440 wireless?

  I'm live streaming video from my sony HDR-Cx440 to an iPAD using app "playmemories Mobile". Communication between these two seems to be on Channel 6 and which interferes with my other wireless devices. I want to change the channel from 6 to any other channel wireless. How can I do?

  Salvation TV,.

  Welcome to the community of Sony!

  We're sorry, but there is no way to change the configuration wireless from the camera to a different channel.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Noise of headset (Nokia HS4W) on the channel after a variable delay

  Hello

  I use a laptop from Dell (Latitude D610) with Toshiba Bluetooth stack. I used the last battery Bluetooth of Dell (4.00.20D) two & Toshiba sites (5.10). The two of us, I have a strange problem: in the beginning, everything works fine, but after a variable delay, the channel is full of noise (VET hard) and I can't talk more. I have to disconnect the helmet finally disbale/enable bluetooth on laptop and restart. Sometimes, I have observed the time being exactly 10 minutes or 5 minutes...

  Someone at - it had the same problem? as I don't see if the problem comes from the shape of the card of laptop/BT of Dell, driver or Driver version or headset Nokia...

  Thank you!

  I read something about such behavior in a discussion forum. In this case, the CSR bluetooth module firmware was the problem. So, you should try to update your firmware if possible. My laptop has the latest BT 2.0 + EDR Bluetooth CSR chip and works very well in combination with the Toshiba BT stack and the helmet.

• F20 - 141 - Qosmio Player - how can I set the channels?

  Hi all!

  Everything is good with my laptop, but I have a question dealt Q-Player:

  How do I tune the channels, when I use Qosmio Player?
  I can't find any button on the remote control or front panel of the laptop... :(

  Thank you

  1. press on the TV icon bluelight on-screen panael to turn on the TV
  1. do NOT use the power button
  3 or by button on live TV on the remote control to switch on the mode a player qosmio without having to start windows
  4. press F2 for your wishes and followw instructions
  5. press F1 for other TV functions

  Enjoy

  min

• Speed problems according to the channel in which I connect - Possible hardware problem:

  Hello

  I bought a R8000 about 1 month, and it worked pretty well. Last week, I read a review on the router suggested what a turn on the Smart Connect. That's when the problems started.

  -Panda USB wireless that worked perfectly started to have speeds of 1.5 Mbps when my service is Comcast 150MBps explosion. Before turning on the S.C., it reaches that speed easily.

  -After the filming of Smart Connect, did not improve the performance of the USB dongle. It is remained at 1.5 Mbps to 3MBPs. I tried to fix it for a week now.

  -J' I reset the modem (button reset button for 10 seconds), configured my router again and added to my dongle is malfunctioning, the router started having trouble to detect my external WD "My passport".

  Today, troubleshooting the wireless dongle with Panda, I changed the channel 5 GHz at the elementary school and the speed is back to 170 Mbps. The router is kept at approximately 3 M from the computer without any obstacles between them.

  Finally, the streaming of my router (with cable) to my TV using DLNA sometimes stutters. yesterday, she even caused the TV to not recognize the transmitted file.

  Can you help me troubleshoot the router more far to find if it is defective?

  Thank you

  As I started the topic, I would give it a closure. My problem was that I had a USB Wireless Dongle of Panda, who performed in the secondary channel (high way) but ridiculously low in the primary (Channel Low). As I had Smart Connect lit, I couldn't control my connected computer channel and appeared the problem was with the router.

  That said, I noticed a better balance between devices when I disabled the dynamic QoS option. I don't know if the algorithm for dynamic QoS is simply wrong or its implementation by the current firmware (V1.0.3.4_1.1.2) is buggy.

  In any case, currently, everything works with me. Explosion of Comcast 150Mbps and rapid tests is between 157 to 153Mbps in tests using a channel 5 G.

• How to multiply the channel by variable

  Hello

  I have a timestamp that is not real time, but the next number. I know that the interval (such as 1 or 10 seconds) of the measures. So I am this conversion to standard time. In this case, I need to multiply this channel by given interval. It's easy, because you can multiply the channel by a constant like below:

    Call ChnCalculate ("Ch(""[2]/Seconds1"") = Ch(""[1]/#"") * 1")
  
    Call ChnCalculate ("Ch(""[2]/Minutes1"") = Ch(""[2]/Seconds1"") / 60")
  
    Call ChnCalculate ("Ch(""[2]/Hours1"") = Ch(""[2]/Minutes1"") / 60")

  But how to do this using the variable? Let's say we have variable s_interval and we want to put this variable instead of multiplying it by constant.

  Ch(""[1]/#"") * 1 ")

  Do you know how to do this?

  Best regards

  Piotr

  Hi Piotr,

  You can set it like this:

  Dim dFactor
  
  Call ChnCalculate ("Ch(""[2]/Noise_1"") = Ch(""[2]/Noise_1"") /"& dFactor ")
  
  

  But I prefer a DIAdem function for this calculation, because it is faster using a well-defined function than the calculator.

  Dim dFactor, dOffset
  
  dFactor = 10
  
  dOffset = 0
  
  Call ChnLinScale ("[1] / Time", "[1] / Time", dFactor, dOffset)
  
  

  or if you use the channel object:

  Dim oChn, dFactor, dOffset
  
  Set oChn = Data.GetChannel("[1]/Time")
  
  dFactor = 10
  
  dOffset = 0
  
  Call ChnLinScale (oChn, oChn, dFactor, dOffset)
  
  

  Greetings

  Walter

• Calculations using values in the channels

  Is there a way to make simple calculations (addition/subtraction) of single values selected channels?   New user DIAdem, so I'm not at all familiar with the scripts.  Looks like it should be a simple command, and I'm right on it.

  Thank you

  Shannon

  Hello Shannon,.

  It seems to me that you do not want to add two or more 'cells' (to use the jargon of Excel) together.

  DIAdem manages data such as channels, not individual cells. If the approach to add two cells in DIAdem works like this:

  The variable SMC allows you to access a 'cell' in a channel, using the following sequence parameters:

  ChD (X, Y)

  where X is the line number of the table of channel, and Y is the name of the channel (column) or the number of the cell you want to access.

  For example, this expression here calculates the result of adding the value of line 2 of the channel called "Temperature_1" and the channel called "Temperature_2" of the example data set that takes over at the start of tiara. In this case, R1 is a real internal DIAdem variable that stores a single value.

  R1 = SEC (2, Ch("[4]/Temperature_1")) + SMC (2, Ch("[4]/Temperature_2"))

  The calculation above can be entered in the "Calculator" which is available in MODE of DIAdem and DIAdem analysis in the toolbar.

  

  I hope it's useful, please let us know if you have additional questions.

  Otmar

• Difference between the name of the channel & Pulse Terminal (NI USB-6212)

  I have a box OR USB - 6212 & on the pinout data sheet, it is said that the FREQ OUT default PIN is 40 & the signal name is PFI14.

  I am trying to generate a pulse by FREQ OUT in c# & DAQmx by calling channel name "dev2/freqout". When I ran the program & attempted to verify the measurement using a multimeter, I don't have a reading of the PFI 14, but 6 PFI. When I tried to set the name of the channel for "Dev2/freqout", the pulse filled Terminal automatically textboox with control unit using the test panels & "/ Dev2/PFI6. When I started the program, I got multimeter reading out of the Terminal impulse.

  Can someone please explain to me about this behavior?

  Also if I want to write a program to read the pulses generated by FREQ OUT, should I wire PFI 14 to some CBC CTR or PFI6 to CTR CBC?

  No explanations and answers are very aprpeciated.

  Thank you

  Hi Kasrus,

  Thank you for that bring to our attention. I will study this question that you may have found an error in our documentation. My recommendation would be to use the PIN that works for you.

  Thanks again for us help to continuously improve!

  -------

  Aaron F.

  National Instruments

• Extract and save all the channels of the PXI-5105 with 4 M of edge detection... Help!

  Dear collegaues!

  Please help me to improve my request, exhibit attached and sorry for my English.

  So my task is to extract and save all the channels (eight) of the PXI-5105 with 4 M of detection of peaks and sample rate 4 M with loop 1 sec...

  Entered all my channels are wiring detectors NaI with 0, 5... 1 microsec pulse (really) width and 0 kHz at not more than 40 kHz freq.

  Why I chose the registration of 4 M and the sampling frequency of 4 M namely? Answer is that I tested previously PXI-5105 40 kHz generator and pulse width 0.5 microsec. It works great and detection of peaks indicate 40000 pulses/s for me. If I set lower than 4M record and sample rate of 4 M, it is without work. In my honest opinion record 4 M and the frequency of sampling of 4 M are parameters very min.

  In the detection of peaks time present only 6 working channels... When I connected to diagram more 6 "detector.vi peak" - I see the error "...". out of memory... ».

  Advise me please, what needs to be done to it, it's all working well.

  
  

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas