"NTLDR is missing"... do you have I wipe all my father-in-law laptop?

Similar Questions

• you have the problem when I plug in my laptop, the brightness is low.

  you have the problem when I plug in my laptop, the brightness is low.

  No, when I plug it into electricity, it's low.

  It's usually the other way around... check the power settings. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• We just do the last update on Photoshop - that's why whenever we now open photoshop you have to select all the toolbars we want.  They used to be there for example, layers, tools, colors, etc., but now, we have to select each time

  We just do the last update on Photoshop - that's why whenever we now open photoshop you have to select all the toolbars we want.  They used to be there for example, layers, tools, colors, etc., but now, we have to select each time

  You look at the new start screen and files recent screen.  Press ESC to return to your usual workspace.

• NTLDR is missing - when you try to install Windows 7 on another hard drive

  I have a PC Compaq Presario SR2027X a/w Win XP Media Center Edition SP3 installed.  I downloaded and installed the Microsoft Windows 7 Upgrade Advisor to determine if WIN 7 would go on my system.  The airport of Win 7 Upgrade Advisor said that I could install Win 7.  I bought Win 7 32 bit and 2-1 GB PC5300 memory sticks.  I first installed the memory and booted up the system.  Everything worked well.  BIOS has seen the new memory and I have not encountered any error.

  I then turning the system off and removed the HDD (120 GB Sata).  I installed another hard drive (160 GB Sata) which had been restructured and ready to use.  The BIOS detects the hard drive and the BIOS has been changed for a start of the OPTICAL drive.  I then placed the WIN 7 32-bit software disk in the OPTICAL drive and saved the changes in BIOS and rebooted the system.  I was expecting to see the normal WIN 7 screens during the installation.  Instead, I got "NTLDR is missing, press CTRL + ALT + DEL to restart".

  Then I tried pressing ESC during boot to enter the boot menu.  Once in the boot menu, I select the optical drive and now I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND press ENTER".  I opened and close the optical drive optical drive light lights up, and I then press on enter.  I get the same message on "DISK BOOT FAILURE,...» ».

  I built more than 40 PC and have never had this problem.  Is there something unique about Compaq/HP PC's that prevents me to install WIN 7 on another hard drive that is not the original hard drive came with this pc?

  HP / Compaq computers are no different from any other computer on the market. You can install Windows XP, Vista, 7 or 8 on almost all made within the last 7 years.

  I think that your problem is due to a failure of CD/DVD drive or disk installation of Windows 7 corrupt or unbootable. Please check that the CD/DVD drive is fully functional and functional as should be. Also, check that your Windows 7 disc is free of errors and that it is bootable. If necessary, you can download a Windows 7 SP1 ISO from HERE and HERE and also download Windows 7 USB/DVD Download tool.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• NTLDR is missing when you try to clean install of Windows 7 Pro x 64

  I have an old newly reformatted hard drive HD in any new system, when you try to install Windows 7 Pro x 64 I get the message "NTLDR is missing Press Ctrl + Alt + Delete to restart» How past this to install the OS?

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Yahoo Mail works fine on, but on Firefox formatting is missing, don't have button fastening & all apps like photo edit are missing.

  All I can do is email Blk & Wht with pre-selection of police and the size. In addition, 100% of the applications under the left column of the files are missing. Large files, photo editing, stationary etc. In fact, the scrolling stops at the bottom of the folder list. I contacted Yahoo, a fix has been tried, but there is no change. Yahoo said since my mail works correctly under Internet Explorer, I have to contact Firefox. Also, my color theme of Yahoo will not hold my selection. Whenever I go to the Firefox post, the theme did defect to him is difficult to see the colors.

  Thanks cor - el. Lost in all the links, tried a few options that did not help. Called my online support tech who did open in safe mode. Fixed it, but he doesn't know how! It's working now. $2.99 extra month for Frontier Core Security if you have the IP of border. I thought that my other service of $200 was a good deal. But it beats D. Cyber.

• When I uninstalled Firefox Nightly, why do you have it removed all my bookmarks and plugins for Firefox itself? I'm not saying to remove these features.

  Refer to the issue.

  If you have selected the option "delete personal data nightly and customizations" during the uninstallation of the Nightly version, you deleted all your Firefox profiles.

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help?

  I have a hp430 laptop with Windows 7 64 bit ultimate. After having a kind of pilot/virus that froze my computer, even once, I reinstalled my laptop with windows 7 64-bit ultimate.

  Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..

  In Device Manager I see 4 devices linked to the internet wireless:

  1 > 1 other devices > network controller

  2 > pci device

  3 > pci simple communication controller

  4 > Sm bus controller

  -all the features above then have a yellow warning sign-the error is to have no driver installed.

  What should I do? How can I get my Wi - Fi to work again?

  I found a solution

  http://www.PCIDatabase.com/

  go through that link above just enter #ven in the name of the Salesperson box and #dev in the dev on search button vill box.click a list of devices .go through the device u pc download of the combination of this vill...

  for #ven and #dev, we need to click on 'network controller', which need drivers in Device Manager.

  Then click on the Details tab. In the property drop-down list, select the second element (Hardware ID).

  We can get to the #ven and #dev of the first string you see in the window...

  hope this helps others...

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help please?

  I have a HP Pavilion g7 - 1205ev laptop with Windows 7 64 bit Home Premium edition.

  I bought a new hard drive, so I had to reinstall Windows.

  After installation, the laptop cannot connect to internet by wifi or Ethernet. After trying the troubleshooting it says that windows do not detect a network card installed properly.

  In the Device Manager, I see that there is an exclamation to these exact components:

  Standard VGA graphics card

  BCM20702AO

  Ethernet controller

  Network controller

  PCI device

  PCI Simple Communications controller

  SM Bus controller

  Download all these somewhere? And of course I'll upload them to another PC that my laptop will not at all online.

  I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet very well. (If this information is useful at all)

  Can someone tell me what to do? I'd appreciate any help. Thank you.

  Hello:

  Here are links to the drivers you need...

  First, install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Then, install the graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99756-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100017-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Network controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95652-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  BCM20702AO:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94325-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Dev PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Help, please

  I have a Pavilion dv6 laptop Notebook with Windows 7 64 bit Home Premium edition. After formatting the computer's hard drive, I reinstalled Windows 7 64 bit Home Premium edition.

  Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..

  In Device Manager I see 2 devices linked to the internet wireless:

  1. other devices > Network Controller - it has a yellow warning sign then him - the error is to have no driver installed.

  2 network adapters > Realtek PCIe FE Family Controller - "this device works properly."

  Here is the hardware ID's for the network controller is not working: PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  What should I do? How can I get my Wi - Fi to work again?

  Thank you...

  Hello:

  Here is the link for the driver you need for your Realtek RTL8188CE 802.11b/g/n WiFi Adapter.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-100014-1&mode=5

  Paul

• You have to download all the programs twice?

  With CC, if you run it on two PC - I guess it is still allowed - have you download the installer for all of the following twice - one for each PC?

  Where can I download it to a PC and use the exe to install on the second PC?

  My second PC is not a good internet connection (just to validate / save programs) and will not, therefore, be able to download all programs without waiting more than a day!

  Someone at - he had an experience of this?

  Hi Missteach,

  I'm sorry that I misunderstood your request. For the next release, we have creative cloud package and you can download it on one machine and install on other machines.

  Hope this clears your doubt.

  Thank you

  Kapil Malik

• Satellite Pro 4200: ACPI BIOS non-compliant system - NTLDR is missing

  Toshiba Satellite Pro 4200 series, ACPI BIOS non-compliant system

  I have an old Toshiba Satellite Pro 4200 series, I tried to install win98 2000 and xp, but it never completes the whole upward, I get these messages;

  ACPI BIOS non-compliant system
  and
  NTLDR is missing

  I have looked for a bios update but can't find one for the 4200, can anyone help?

  Thank you

  Hello

  Have you tried to reinstall the OS using the Toshiba Recovery CD?
  "I found the troubleshooting of Microsoft on the NTLDR is missing ' error message.

  Please check this:
  http://support.Microsoft.com/kb/318728

• Error - NTLDR is missing from the Windows XP computer.

  Original title: difficulty ntldr missing.

  I don't have xp recovery disk. I get lack ntldr message at startup. How can I fix wihout disc?

  Since the MS Answers forum does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.  What makes which gives good ideas for extremely difficult solution.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  You can create a bootable CD from the Console of the Recovery XP (no XP media required) and start the XP Recovery Console.

  The chances are pretty good that there is a copy of the NTLDR file on your system to another location, so you can replace the missing file.

  The file is supposed to be like c:\ntldr c:\ root folder (note there is no file for the ntldr file extension) but of course your seems to have developed missing.

  If your system is preinstalled with XP there is probably a folder c:\i386 on your system and that there should be a copy of the file in folder c:\i386 NTLDR.

  If you have installed Service Pack 3 download Internet via the World Wide Web Wide, there will be a copy of the NTLDR file in this folder:

  c:\Windows\ServicepackFiles\i386

  Once you get started the recovery console and you ran chkdsk/r, I would see if these commands will work for you to replace the missing file:

  copy c:\i386\ntldr c:\

  or

  copy c:\windows\servicepackfiles\i386\ntldr c:\

  Here's how to make a CD of bootable XP Recovery Console and I would run the chkdsk /r FIRST to make sure that your file system is not damaged.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

• FN bar does not appear after you have reinstalled Windows on Satellite A200

  Hello.
  First of all, sorry if my English is not very good, but I am French.
  After a format, I installed some of the drivers of Toshiba. But, I'm not the bar at the top of the screen when I press the "fn". So I would like to know how the driver I need to install to have this bar.
  PS: I have a Satellite A200.
  Thank you for your help and I hope that you will understand me.

  Hello

  Do not install some drivers but all only if you want to use all the features of Toshiba laptops ;)

  The visible bar that controls the FN keys is Toshiba Vista Flashcards.
  You can find this utility in the Toshiba value added package.

  But note; the common Modules located in the package of Toshiba value added too must be installed first!

  Good bye