NTLM authentication is supported style UPN (userPrincipalname) username?

Similar Questions

• Apex 4.2.2 NTLM authentication

  Hi all

  I have Apex 4.2.2 running on the Oracle 11.2.0.4.0 database. We use SST for web server.

  I'm trying to set up NTLM authentication and the use of the article by Jason Straub.

  http://jastraub.blogspot.com/2008/03/NTLM-HTTP-authentication-and.html

  I created the function using this code and it compiled without any errors. I've granted execute permissions to APEX_PUBLIC_USER on this feature as well. I added the line "PlsqlCGIEnvironmentList AUTHORIZATION" in the file dads.conf SST.
  

  I created the authentication scheme as described in the article and made current.

  Now, when I run the application, I get the following error.

  Function of Sentinel of treatment of the error session.

  ORA-44004: invalid qualified SQL name

  
  

  Screenshot of my authentication scheme

  

  Screenshot of my mistake.

  

  Is that what I'm doing wrong? Any help is greatly appreciated.

  Thank you

  He may be the owner of the schema as a qualification?

  Some readings

  Custom authentication does not work after upgrade to 4.1

• Configuration of the ASA to ISA authentication proxy support

  I have an ASA configured for internet and remote vpn termination. I would use a proxy for remote access vpn clients ISA authentication. Configure this support on the SAA?

  Topology: Inside ===> ISA ===> ASA ===> Internet network

  David,

  Given that this is a forum of Cisco (I can google it, but I'd rather have a recording directly in a thread), can you tell me what is the role of proxy of the ISA authentication? And how it works.

  Normally proxy authentication (auth-proxy on the router and passage of a proxy in the firewalls) are transparent to other devices in the network on the network.

• NTLM authentication does not work well with Firefox and WebTier (11 GR 2)

  Hello
  We use authentication NTLM with Jason Straubs NTLM - Sentry feature (http://jastraub.blogspot.com/2008/03/ntlm-http-authentication-and.html) Page.
  
  With the old configuration of Apex 3.2 with HTTP-Server Oracle 10 g 2-companion-album, it works fine.
  
  Now install us a Web server with Oracle 11 GR 2 (Oracle Web Tier). I have set up the DADS. CONF in the same way as the old HTTP server. With IE, it works, but with Firefox, I get a HTTP 401 "authorization required". If I press the F5 key to reload the page in Firefox, it works.
  
  Any suggestions?
  
  Kind regards
  Mark

  Hi Mark,

  I'm sorry that I have not seen that you stayed with APEX 3.2. Therefore, it is fair to ESO who changed...

  First new idea:
  Debug information are useful as we see where Firefox gets to. The flow seems to be the same for both browsers. Perhaps the WebTier sends answers differently. I see another article that could be excluded for Firefox:

          -- See http://www.nabble.com/Empty-POST-requests-on-IE-td15332680.html
          -- We have to trick IE that he thinks the authentication fails, otherwise
          -- he doesn't send any data when issueing a POST because he wants to
          -- do the NTLM stuff again
          owa_util.status_line
            ( nstatus => 401,
              creason => 'Unauthorized',
              bclose_header => FALSE
            );
  

  The commentary says that the part is required for IE. The result for owa_util.status_line is perhaps send too early for Firefox or closed, that the 'old' OSH handled diffrently. If indeed this should be left aside for Firefox, you can try to change the code as follows

  IF WWV_Flow.get_browser_version != 'NSCP'
          THEN
          -- See http://www.nabble.com/Empty-POST-requests-on-IE-td15332680.html
          -- We have to trick IE that he thinks the authentication fails, otherwise
          -- he doesn't send any data when issueing a POST because he wants to
          -- do the NTLM stuff again
          owa_util.status_line
            ( nstatus => 401,
              creason => 'Unauthorized',
              bclose_header => FALSE
            );
  END IF;
  

  This leads me to a second point:
  I remember of this manual, you may need to update the owa_util when using the APEX in combination with OHS 11 g.
  What version of owa_util do you currently use?

  select owa_util.get_version from dual;
  

  APEX 3.2.1 comes with owa_util 10.2.0.6 which is the minimum required version. If your database currently has a lower version, you can update it out of your installation package APEX by running owainst.sql located in the owa- directory as sysdba.

  -Udo

  Published by: Udo on 31.08.2010 14:16
  Comparison of fixed

• PID-02062-486-0532407 - 01005 MS authentic label support responds that it's mouse 4000 not 2000?

  trying to get the support of MS 2000 wireless mouse when entered support responds that this number is for MS wireless mouse 4000 labels are genuine on the mouse and usb transceiver and came in airtight container

  Hello

  1. what exactly is the problem?

  2 are you facing problems with the wireless mouse?

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/838398

  It will be useful.

• Driver detective program does not start due to the error of standard police '"Regular", police Arial doesn't support style.

  Have updated to the latest version without result

  Hello Midasi,

  According to the Windows 7 Compatibility Center, Driver Detective version 8 is compatible with Windows 7. What version you are trying to install?
  See the list here for compatibility.

  I suggest that you contact the manufacturer, PC drivers headquarters for assistance with the question and see if they have updated their software.
  http://www.drivershq.com/

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• NTLM authentication

  Hello. How can I get ColdFusion 8 using an Active Directory server in the Server 2003/8 (NTLM) to authenticate users? I want users to connect to the site using their domain information. The server is running Apache... Do I need IIS?

  Thank you!

  I can't go much father and on me, or any other contractor, coming to your site and write your code for you after your correct data network administrator.  The success rate for this type of work is $100 US per hour plus the costs of travel and more.

  The ColdFusion documentation has examples of code very similar to what is provided here.

• Web service - transmission of NTLM authentication user

  APEX 4.0.2
  
  All our defined applications APP_USER in header REMOTE_USER CGI which is defined by the OHS mod_ntlm module to the logged in Windows user. Is it possible to invoke web service references (REST) defined in the application to behave as if this user is calling the web service? As if the service request was made directly from the browser (IE).
  
  Hard code credentials into the definition of APEX app, pass them through a URL, the service accessible to anonymous users, etc., are unacceptable alternatives.
  
  Any ideas?
  
  Thank you

  Vikas:

  You can use the APEX_WEB_SERVICE API to set HTTP headers (in this case, you can set CGI_REMOTE_USER). The following documentation describes how to configure the request headers. Note that when you set the header via APEX_WEB_SERVICE, interactions of web service uses the headers, not just those invoked through APEX_WEB_SERVICE.

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_web_service.htm#BABDFEJG

  Kind regards

  Jason

• Video Jabber for telepresence iPAD - Support NTLM

  I intend to enable pass-through authentication AD on the RESUME for Jabber clients.

  VCS X7.2

  I want to know, will the jabber for iPAD support NTLM authentication. I see the deployment guide to only mention Movi 4.2 or later.

  -What Jabber account for iPAD versions 1.X aswell.

  Yes, we use Jabber for iPad, and they connect through NTLM authentication to our VCS.

  Thank you

  Guy

• IPhone 5s does support 802. 1 x EAP - SIM authentication?

  Hello, I have a question. IPhone ios 9 does support 802. 1 x EAP - SIM authentication?

  Hello hot_111,

  Thank you for using communities of Apple Support.

  It seems that since iOS iOS 5.1 devices supported authentication EAP - SIM of 802. 1 x. see this:

  You can integrate iOS devices in a wide range of RADIUS authentication environments. 802. 1 X wireless authentication methods supported on iPhone, iPad, and iPod touch are EAP - TLS, EAP-TTLS, EAP-FAST, EAP - SIM, PEAPv0, PEAPv1, and LEAP.

  More information and it is contained in the following article:

  Apple 802 technical white paper. 1 x authentication

  I found no information indicating that this support has been removed.

  Best regards.

• How to set authentication with domain name in PL/SQL WebService

  Dear Sir

  I could see the content of the Web service in a browser with the user name and password then I'v tested with soupUI and I had to enter the user name and password and domain but I couldn't

  No information in pl/sql. I think my problem is how to define area.

  Browser authentication: OK

  username = "TST\saeed".

  password = 'test '.

  soupUI of authentication: OK

  username = "Salam".

  password = 'test '.

  domain = "TST".

  PL/SQL: failure

  
  

  declare

  Utl_http.req req;

  resp utl_http.resp;

  RW varchar2 (32767).

  Start

  Utl_http.set_Proxy ('http://127.0.0.0:80');

  Req: = utl_http.begin_request ('http://test/sendDATA.ASMX');

  UTL_HTTP. SET_AUTHENTICATION (req, 'TST\saeed', 'test', 'Basic', TRUE);

  resp: = utl_http.get_response (req);

  loop

  Start

  RW: = null;

  Utl_http.read_line (RESP, rw, TRUE);

  SYS. DBMS_OUTPUT. Put_line (RW);

  exception when others then

  "exit";

  end;

  end loop;

  Utl_http.end_response (resp);

  end;

  Result:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"

  < title > 401 - Unauthorized: access is denied due to credentials not valid. < /title >

  < / head >

  < body >

  < div id = "header" > < error Server h1 > < / h1 > < / div >

  < div id = "content" >

  < div class = "content-container" > < fieldset >

  < h2 > 401 - Unauthorized: access is denied due to credentials not valid. < / h2 >

  < h3 > you are not allowed to view this directory or page using the credentials you supplied. < / h3 >

  < / fieldset > < / div >

  < / div >

  < / body >

  < / html >

  Kind regards

  Saeed.

  Dear all,

  I found with the software "Fiddler Web Debugger" authentication type is notBasic"is"NTLM authentication"so it solved my problem.

  Unfortunately, the Oracle UTL_HTTP package does not support NTLM authentication (it only supports basic via the SET_AUTHENTICATION procedure).

  Reference: http://ora-00001.blogspot.co.uk/2011/08/ntlm-for-plsql.html by Morten Bråten

  Kind regards

  Saeed.

• Error "Failed authentication PLAIN-CLIENTTOKEN" in Windows Mail

  I get the following message from 26/04/14, before that I had no problem with my Windows Mail.  I get this:

  The CLIENTTOKEN PLAIN authentication failed.  None of the authentication methods supported by your IMAP server (if any) are supported on this computer.

  Until yesterday, I had no problem my email.  I don't like the way in which gmail is their e-mail.  I love windows mail but I need help.

  Thank you

  Patricia R

  Original title: Windows Mail

  Hi Bruce,.

  I just wanted you to know that I uncheck in Windows Mail, Log In to authentician and I can now access my e-mail from Windows.

  Thanks again for your help request

  Nice day

  Patricia

• Lost product key, have the backup disc and certificate of authenticity

  Is there a way that I can avoid having to land $200 for a new product key?

  Lost or misplaced product key (certificate of authenticity)
  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?
  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:
  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

  For more information on this topic, visit http://support.microsoft.com/kb/811224 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• ACS with AD-with authentication of twins

  Hi gurus

  I want to integrate my 5.1 ACS with AD, my request is to check first for the machine authentication. If the machine authentication passes the customer name to username/password must be validated and customer should be in VLAN X. If the computer authentication fails, the user/password customer name must be validated. If authentication is successful the customer should be put into VLAN Y

  Let me know if this is possible

  Thank you

  NikhiL

  Nikhil,

  You can set a condition in your authorization policy and check whether the machine authentication has been made and your result out of this basic requirement.

  Here's a guide that corresponds to your questions:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1235978

  Thank you

  Tarik Admani

• GANYMEDE + Queueing AAA authentication

  Hello

  I've recently updated the IOS on my 3560 X 15.0 (2) SE3 and I can't get GANYMEDE works correctly. It worked properly on this device until I updated the IOS so I don't know what happened. I've made a few other changes as well (management IP change and clean the other config) so I'm not 100% sure what the issue was with the IOS. I have this same exact config on several other Cisco devices and it works fine. Any thoughts are appreciated.

  Config:

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  Ganymede IP source interface Vlan1

  radius-server host

  Ganymede IP source interface Vlan1
  GANYMEDE-server host 10.x.x.x key *.

  Debugs:

  MORE: Queuing request authentication AAA 88 for the treatment

  I never spent queuing. I can't find a way to clear the queue either.

  I have to disable the uplink port and reboot the switch to not even enter the port of the console. At this point, I get 1 authentication attempt (debugging below) before entering the queue messages.

  21:34:36.864 Mar 29 CDT: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed State to

  21:40:48.068 Mar 29 CDT: MORE: Queuing AAA request authentication 47 for the treatment

  21:40:48.068 Mar 29 CDT: HIGHER: processing id authentication of demand beginning 47

  21:40:48.068 Mar 29 CDT: MORE: authentication start package created for 47(**USERNAME**)

  21:40:48.068 Mar 29 CDT: MORE: using the 10.x.x.x server

  21:40:48.068 Mar 29 CDT: HIGHER (0000002F) / 0/IDLE/68F4CBC: started 5 sec timeout

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F) / 0/IDLE/68F4CBC: got immediately connect on the new 0

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F) / 68F4CBC/WRITING/0: started 5 sec timeout

  21:40:48.077 Mar 29 CDT: T +: 192 (0xC0) Version, type 1, seq 1, encryption 1, SC 0

  21:40:48.077 Mar 29 CDT: T +: session_id 912650955 (0x3665F2CB), dlen 32 (0x20)

  21:40:48.077 Mar 29 CDT: T +: type: AUTHENTIC / START, priv_lvl:1 action: ascii LOGIN

  21:40:48.077 Mar 29 CDT: T +: svc:LOGIN user_len:11 port_len:4 (0x4) raddr_len:9 (0 x 9) data_len:0

  21:40:48.077 Mar 29 CDT: T +: user: (* USERNAME *)

  21:40:48.077 Mar 29 CDT: T +: port: tty1

  21:40:48.077 Mar 29 CDT: T +: rem_addr: 10.y.y.y

  21:40:48.077 Mar 29 CDT: T +: data:

  21:40:48.077 Mar 29 CDT: T +: end of packet

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F) / 0/WRITING: write to 10.x.x.x failed with errno 257 ((ENOTCONN))

  21:40:48.077 Mar 29 CDT: MORE: authentication start package created for 47(**USERNAME**)

  21:40:48.077 Mar 29 CDT: HIGHER (0000002F): start write failed

  21:43:01.976 Mar 29 CDT: % SYS-5-CONFIG_I: configured from console by dcmorris on console

  21:43:08.057 Mar 29 CDT: MORE: Queuing AAA request authentication 48 for the treatment

  21:45:24.842 Mar 29 CDT: MORE: Queuing AAA request authentication 49 for the treatment

  21:48:52.494 Mar 29 CDT: MORE: Queuing AAA asks 50 for processing authentication

  You might want to take a look here

  https://supportforums.Cisco.com/message/3965551#3965551

  Jatin kone

  -Does the rate of useful messages-