Video Jabber for telepresence iPAD - Support NTLM

Similar Questions

• Video Jabber for TelePresence, VCS-E connection problem

  Hello

  I recently configured control VCS, VCS Expressway and TMS. Two VCS servers are software X7.2 and TMS is on 14.1.1 commissioning is configured between the VCS control and TMS, everything works OK internally and users can log in their Jabber client of telepresence video.

  When you try to connect via the highway-VCS I get the following question: "connection refused by the server. Try to connect again later"

  Area authentication is configured like this:

  VCS-Highway

  Sub-area by default: do not check the credentials

  Area Sefault: Do not check the credentials

  Crossing area: Do not check the credentials

  VCS-control

  Default subfield: treat as authenticated

  Area by default: credentials check

  Subarea: Credentials Check {area which movi users register to regex function}

  Crossing area: Do not check the credentials

  Search the rules between the two VCS game [email protected] / * / OK.

  The only port of the restrictions in place here are between the VCS control and VCS Expressway, outgoing ports open to the highway of the SANCTION.

  It seems to me that there is a connection problem, as opposed to an authentication problem. also, do I need to configure a SIP domain local VCS-Highway even if I try to proxy, registration to the VCS control.

  Would be appreciated if someone can verify my authentication area also...

  Thank you

  Simon,

  to do this, you re normally the area on VCS - C as "check credentials.

  If you want to proxy of VCS VCS-C-E records, you should not add the SIP domain name to the VCS-E.

  "Rejected by the login server" sounds weird in this case, however, could you share what you use for this deployment, the SIP domain name so that we can verify that your DNS SRV records are fine?

  -Andreas

• Jabber for telepresence (MAC OS)

  I was asked to rollouot the Jabber telepresence (MAC OS). I took all the Jabber for telepresence (Windows) However, I'm not familiar with the version of MAC OS.

  I looked for MAC OS user's guide, however it does not show where to enter the settings for the internal and external parameters.

  If someone has installed the version of MAC OS before and are there special models which must be addedd inot models in MSDS

  If you are looking to create a preconfigured installation program, see here:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/Jabber_Video/4_6/CJAB_BK_C89F6C9E_00_cisco-Jabber-video-for-telepresence_chapter_011.html#CJAB_TK_CB861748_00

  The settings are in the relevant plist, look for com.cisco.JabberVideo.plist located in Library\Preferences.

  Parameters can also be added locally by the user; Open JabberVideo and click the key/screwdriver icon or choose JabberVideo then Preferences from the top Ribbon.

  Otherwise, there is no model of special supply required for the Mac, the two Win version and Mac use the same provisioning models.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Jabber for Telepresence blocked on "connect to..." »

  I had my computer company team check, fix my connection settings (I can ping the internal/SIP Server Server/external domain), but my connection always fails when you attempt to connect to the server.  Tried a different user account, but has the same problem and could not connect. I tried to stop my Windows Firewall service (7) and reinstall/repair of the Jabber for telepresence app, but it remains impossible to connect. Is there anything else I can try? The company VPN is not the issue, because other users can connect successfully from their PC. It seems that the problem is local to my PC, but it's just a new, default basic install Windows 7 x 64. Is there a install logs that I can check for more information on the failure of the connection? Any ideas?

  Thank you

  See attached pdf for how to make debugging (it says Win XP, but it is the same procedure for Win 7), it might give you a clue as to what's going on - however, if your connection attempt is actually hitting the server, then your COMPUTER team should be able to see this, and any associated error , the newspaper of the VCS.

  /Jens

  Please note the answers and score (s) questions such as "answered" as appropriate.

• TMS Jabber for Telepresence

  We have tested Active Directory for commissioning.  TMS 13.2.1, VCS 7.2.1.

  Jabber accounts allow the connection with where appropriate, assigned to the AD account.

  However, he is allowing the connection regardless of password.

  If the account name is incorrect when you connect, it fails.  If the user is not a member of the appropriate group, it fails.  It is as desired.

  However, if we go all or nothing in password, it allows to connect.

  What Miss me?

  Thank you

  Check settings of authentication of zone and subzone of your VCS, I suspect that they are set to "Treat as certified" that will allow anyone to register regardless of what is presented for authentication.  You must set the appropriate boxes for 'Check Credentials', which will allow only those that match exactly on behalf of username/password for the Jabber account.

  ID suggest you discover the VCS authenticate devices Deployment Guide, which will help you better understand the parameters you need and the desired result you want.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-0.PDF

• How can I get Jabber works on iPad without CUCM?

  Nice day

  Question: How can I get Jabber works on iPad with TMS and VCS instead of CUCM?

  Material: TMS 14.5 with VCSC/VCSE X8.2.1 and TMSPE 1.0

  Rarely Jabber is used on an iPad here for the last time we tested, it was probably more than a year and it worked great. I have a new request if and when you go to the store I notice the previous product working is no longer available and has changed for Cisco Jabber 11.0.3. I feel that this only works with CUCM.

  Can someone tell me if it is possible to get this new application running without CUCM and rather through VCS /TMS? I tested a variety of attempts to connect to the new application and they are all lead to not being able to find a server. Cisco documentation is a bit complicated on this issue so I'm hoping someone here might have some experience with this.

  Any help is greatly appreciated.

  Thank you
  Mike

  The customer you are looking for is 'Cisco Jabber Video for iPad', which is what Jamie refers in its response.

  However, the Jabber video for iPad is therefore more available for download, as it's end-of-sale (eos-eol-notice-c51-732786), this is because Apple requires that all their applications must be 64-bit, and it was not possible to update Jabber video application as 32-bit based.  In addition, in the case where you have the video Jabber for telepresence (Movi) customer is also EOS (eos-eol-notice-c51-732787).

  Replacement for both video Jabber clients products are Cisco Jabber client (that you mention at the end of your message) with CUCM only, as call manager is management that moves to Cisco for call control.

• Jabber for iPad - model provisioning of TMS

  First of all, I didn't know where to post this... in the Jabber for iPad or article of telepresence.  So I thought as it comes to the TMS, I would put it here.

  Where can we download the MSDS provisioning model for the new Jabber for the release of the iPad, trying to set it up for the video?  It provides a link to where you can download the template, but there is no section for iPad.  Documentation on setting up with the TMS and VCS is linked below, it's just as if we were video configuration Jabber for telepresence (Windows/MAC).

  http://www.Cisco.com/en/us/docs/voice_ip_comm/Jabber/iPad/Admin_doc/output/b_Jabber_for_iPad_admin_guide_chapter_011.html#concept_2A3A1909CB6E43F19BECF9F04F765B75

  Thanks, Patrick

  Hi Tom and all,.

  The TMS Provisioning model is attached. It should be posted the ORC in the coming days.

  Thank you

  Paul

  Edit: The model of commissioning has been posted here on the EAC:

  http://download.Cisco.com/SWC/ESD/06/284288351/contract/jabbertablet_provisioning_template.XML

  Release notes are here:

  http://www.Cisco.com/en/us/docs/voice_ip_comm/Jabber/iPad/Release_notes/output/b_release_notes.html

  The attachment is deleted.

• Cisco Jabber for iPad released 9.2, dns issue

  Hello!

  Is there an administrator's guide for the new version of the iPad? I can only find one for version 9.1:

  http://www.Cisco.com/en/us/docs/voice_ip_comm/Jabber/iPad/9_1/Admin/JABP_BK_J3C828CB_00_jabber-for-iPad-Admin-9-1-1.html

  which does not describe the function of automatic discovery for the style connection "e-mail."

  I can see there are some research carried out:

  TXT? domain.com.
  SRV? _cuplogin._tcp.domain.com.
  SRV? _xmpp-client._tcp.domain.com.
  SRV? _cisco-phone-tftp._tcp.domain.com.
  SRV? _cisco-phone-http._tcp.domain.com.
  SRV? _sips._tcp.internal.domain.com.
  SRV? _sip._tcp.internal.domain.com.
  SRV? _sips._tcp.external.domain.com.
  SRV? _sip._tcp.external.domain.com.
  SRV? _ciscoedge._tcp.domain.com.
  SRV? _ciscowtp._tcp.domain.com.
  SRV? _ciscowtp._tcp.jabber.com.
  SRV? _ciscowtp._tcp.webex.com.
  

  It works fine for me if I put the _sips._tcp.external.domain.com. pointing to my vcse.

  One explanation could be useful, expecially did what research TXT.

  Hello Martin!

  I know that your question is a couple of weeks and I think since the Jabber for iPad team has posted the last administration guide which has been updated to version 9.2.  See the section 'Setup DNS SRV' as it could explain what you are looking for - I know not how this article differs from the previous guide...

  For the benefit of third parties who have Jabber for the iPad from the specific questions, please note that the community of Jabber Clients is available.

  HTH,

  Paula

• Video of Jabber Cisco Telepresence band bandwidth provisioning

  Hello

  We have deployed video jabber cisco for telepresence 4.5 with VCS 7.2 and TMS 13.2.2.  We use jabber to take interviews. The candidates will be sent the link to download the jabber with the required authentication settings. The Jabber is configured with the Public Max and minimum bandwidth of 768 Kbps.

  My question is related to the downspeed of bandwidth. If we configure the bandwidth of 768 Kbps prvosining and internet bandwidth of candidates is less than 768 Kbps will be the Downspeed VCS to accroding appeal to the bandwidth of the network of candidates.

  for example if my internet connection from home is just 512 Kbps and the use of the jabber to make a call to ex90 in my office. Bandwidth settings is preconfigured in the jabber as 768 Kbps. When the call is established will be VCS downspeed the call at 512 Kbps.

  Krishna.

  You cannot configure a minimum bandwidth, which is always the maximum bandwidth jabbervideo will use.

  The user can only set this value downward but not upward, but as the client detects a loss and stores a database

  with information on used networks recently and its quality.

  So, should not be a big problem the faster speeds available and allow the customer to do magic.

  I woud recommend to (re) read the Jabber_Video_Administrator_Guide

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/MOVI/admin_guide/Jabber_Video_Administrator_Guide_4-5.PDF

  This gives you more information concerning automatic bandwidth adaptation and capabilies of bandwidth detection.

• "Support for Shared iPad in iOS 9.3.

  In the description for the GarageBand 2.1.1 iOS update, I see one of the items listed is "Support for Shared iPad in iOS 9.3.»

  Out of curiosity, what it means exactly? What this has to do with the support of several users to create GarageBand projects on the same iPad? Or, in this same sense, it has to do with school education new features introduced in iOS 9.3?

  He was a frequently requested feature by music teachers to be able to have several students use the same iPad, but not in order to remove the songs from GarageBAnd created other students.

  With Shared iPad all students will be able to download specific projects and content at the beginning of the class and use the iPad with the own AppleID. "t-for-students-new-classroom-app http://appleinsider.com/articles/16/01/11/ios-93-for-ipad-adds-multi-user-suppor".

  I couldn't find details on the new version of GarageBand, but I hope that the support for Shared iPad means that students can save their projects on the Apple ID own and restore them directly before the start of the class.

• What is the best video card for h8 1280t? Because it does not support 700s GTX :(

  I bought a GTX 770 and found HP does not update the bios to take account of the series of video card. TOTALLY LAME. In any case, what IS the best card video, the MB - t supported? (Pegatron ECA2) I have a 550 2 GB GTX OC now so I would like to move to something that is clearly visible to make it useful. Thank you.

  Hello

  HP released a list of HP OEM video cards that will work in the h8 - 1280t.  Look at these specifications.

  The HP h8-1280 is since over 2 years and I don't expect HP to post additional updates.

  If you are having problems with the graphics card no - HP OEM then ask the manufacturer of the video card for redress.

• Jabber (Internet) video->->->-> Jabber CUCM VCSC VCSE for windows

  First of all, I tried Jabber Video (Intranet)->->-> Jabber CUCM VCSC for windows, video and audio are fine, by establishing a SIP trunk between VCSC and CUCM and Zone rule settings and VCSC research.

  Secondly, Jabber (Internet) Video-> VCSE-> VCSC-> Video (Intranet) Jabber, audio and video are very well by estalishing TraversalZone between VCSE and VCSC, as well as the search area in VCSE and VCSC rule.

  There is an obvious idea comes... Jabber (Internet) video->-> VCSC VCSE-> CUCM-> Jabber for windows.

  I tried by two means:

  Option A: I try through Jabber video (Internet)-> VCSE-> TraversalZone-> VCSC-> SIP Trunk-> CUCM-> Jabber for windows, acutally, there isn't any configuration required in VCSE/VCSC/CUCM, because when you dial [email protected] / * /, the VCSE will route the call to the VCSC and then it will move the call to CUCM, but I couldn't get to this subject, the logging of the VCSC He always showed in the message below:

  1. received VCSC VCSE SIP protocol prompt, call [email protected] / * /

  2 VCSC answered VCSE SIP 407 Proxy authentication required.

  3 VCSE answered the VCSC SIP ACK

  I don't know what is the problem here, or additional configuration required, but the call to certainly VCSC already, but I don't know what is the way of the authentication of 407 proxy here... If the Jabber (Internet) Video-> VCSE->-> Video (Intrante) Jabber VCSC, it isn't this 407 proxy authentication in logging.

  Option b: I'm going through Jabber video (Internet)-> VCSE-> SIP Trunk-> CUCM-> Jabber for windows, with the rule of necessary research, in this way, when Jabber (internet Video) composition Jabber for windows, it sounds, and when picked up, one way audio (from Jabber for windows to Jabber video) set up, no video.

  It is normally an authentication problem. I think that you run a software X7.x on your SPRDD? If so, try to activate "treat as authenticated" on the crossing area 'Authentication policy' (both directions, if it is set to "do not verify the credentials") and see if you get the P - asserted-Identity "authenticated" a header then and make a call from the internet, routed throug the VCS - c to your CUCM.

  Are your rules of research on the VCS - c, the value "request must be authenticated = Yes"?

  Hope this helps,

  Arne

• support of the video card for videocalls in windows live messanger

  After you have reinstalled windows 7 because the laptop has been no reservation, the web cam does not work for windows live messenger that is to say that video card do not feature for the Visio support but before restoration was webcam was working perfectly also the webcam works for Skype and facebook

  Hello

  Check:

  http://UK.answers.Yahoo.com/question/index?QID=20090125103417AAy9nVx

  http://answers.Yahoo.com/question/index?QID=20090323215041AAExQJ1

  http://www.Vistax64.com/Windows-Live/247590-webcam-not-working-Windows-Live-Messanger.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-webcam-not-working-in-Windows-Live-Messenger/4425d4e2-E160-41F3-b664-f7cb89d0eefe

• Is Adobe Photoshop Touch for iPad support access Dropbox?

  Is Adobe PS Touch for iPad support access Dropbox?  A client who I will make supplies of laminates work PS files in a secure directory of Dropbox.  Determine if the files in the directory are accessible via the PS button will determine if I buy the product.

  This informative review responded to my question:
  http://www.MacStories.NET/reviews/Adobe-Photoshop-touch/

  These are viable apps for those working professionally on the iPad, need to change (not psdx) multilayer PSD files and import / export from a secure Dropbox directory:
  https://iTunes.Apple.com/us/app/SketchBook-Pro-for-iPad/id364253478?Mt=8
  https://iTunes.Apple.com/us/app/ArtStudio-for-iPad-draw-paint/id364017607?Mt=8

• MIC Stand Pro 9.7 "iPad support

  What is the best microphone for a Pro 9.7 "iPad support?

  If you do a search for "micro support for iPad" you will find several options. Choose one you like. I haven't used one so I can't offer a suggestion.