NTP does not work in the nexus program 5500
Hello, I have a cisco switch connected to the 5500 nexus that syncs with the ntp server, but the link is not.
This is the ntp configuration.
NTP server 10.1.32.3 key 1
NTP server 10.1.32.4 key 1
NTP source-interface loopback0
authenticate the NTP
NTP-1 md5 authentication key hidden 7
NTP - approved key 1
interface loopback0
Description management
IP address 10.1.32.1/32
management of vrf (config) # ping 10.1.32.3
PING 10.1.32.3 (10.1.32.3): 56 data bytes
64 bytes from 10.1.32.3: icmp_seq = 0 ttl = 253 times = 0,733 ms
64 bytes from 10.1.32.3: icmp_seq = 1 ttl = 253 times = 0,797 ms
64 bytes from 10.1.32.3: icmp_seq = 2 ttl = 253 times = 0,909 ms
64 bytes from 10.1.32.3: icmp_seq = 3 ttl = 253 times = 0,923 ms
64 bytes from 10.1.32.3: icmp_seq = 4 ttl = 253 times = 0,902 ms
(config) # ping 10.1.32.4
PING 10.1.32.4 (10.1.32.4): 56 data bytes
64 bytes from 10.1.32.4: icmp_seq = 0 ttl = 254 times = 1.271 ms
64 bytes from 10.1.32.4: icmp_seq = 1 ttl = 254 times = 2,409 ms
64 bytes from 10.1.32.4: icmp_seq = 2 ttl = 254 times = 2,457 ms
64 bytes from 10.1.32.4: icmp_seq = 3 ttl = 254 = ms 2,487 times
64 bytes from 10.1.32.4: icmp_seq = 4 ttl = 254 times = 2,467 ms
the debug ntp output all:
2015 Ms 2 14:58:11.016496 ntp: ntp_sigchld_wait_and_fetch_status: waitpid() returns with status of 27071
2015 Ms 2 14:58:11.017354 ntp: ntp_sigchld_wait_and_fetch_status: child Non - ntp is out! Don't like!
2015 Ms 2 14:58:27.064185 ntp: time of day sending upd standby
2015 Ms 2 14:59:57.064168 ntp: time of day sending upd standby
What could be the problem?
Hello
The output of the show ntp peer-status seems correct and the * indicates at this time there is sync was from the 10.1.32.4 server.
The Show ntp status command is for a different purpose. According to the command reference the 'indicates if Cisco Fabric Services (CFS) is enabled or disabled for the purposes of NTP and know if a fabric lock is in place, because a configuration is in progress'. NTP distribution is discussed in the Distribution of NTP CFS of the configuration guide.
Concerning
Tags: Cisco Network
Similar Questions
-
Tab key does not work at the macro program
Hello
We have an in-house custom macro program that fills the fields in a web page displayed by Firefox.
It is the window handle of the field with the circumflex, sends a string of WM_CHAR messages to fill it with text, sending a WM_CHAR message with a TAB character to change areas and repeat the above for the next field.
This morning 15 Firefox updated itself, and now the program macro does not work. Specifically, Firefox is no longer changes fields form when it receives a tab character, and everything goes in the first field.
No idea what happened?
Better yet, there is a topic a chance: parameter of config to change to make it work again?
Failing that, is it possible to revert to the previous version of Firefox 15?
Thank you.
Jack
Good... ignore the above. It is a real problem with the update of Firefox 15, but a member of our staff has designed a work around for our macro program.
See you soon.
Jack
-
because ive got the vista sp 2 intructions how in adequate stall me mate vershia to mircosoft so if you do not want it if accessories write him an email. and I send it to you so that it works wright for you or you can call me 07876645741 uk your the DREAMCATCHER. PS JUST THOUGHT I WOULD HELP PEOPLE THERE PROBS ARE C.
because ive got the vista sp 2 intructions how in adequate stall me mate vershia to mircosoft so if you do not want it if accessories write him an email. and I send it to you so that it works wright for you or you can call me 07876645741 uk your the DREAMCATCHER. PS JUST THOUGHT I WOULD HELP PEOPLE THERE PROBS ARE C.
-
Windows 8 reading list does not work with the programs desktop or web browsers in the Office
* Original title: playlist of Windows 8
Hello
What a waste of time, this app is!
-"Playlist does not work with programs office or web browsers in the Office! This raises the question: what will work with?
I wish I knew.
Thank you
Chris
Hi Chris,
Playlist does not work with the programs office or web browsers in the design office.
For more information, see the links.
http://Windows.Microsoft.com/en-us/Windows-8/reading-list-app-FAQ
http://Windows.Microsoft.com/en-us/Windows-8/share-to-reading-list
Hope this information helps. If you have any questions, please let us know.
-
AutoComplete does not work on the address field.
AutoComplete does not work on the address field. This means that the completed form is missing from the address. What is special about the address field and why doesn't autocomplete work? I have NOT opted for "don't follow it.
http://www.thepetitionsite.com/TakeAction/918/708/047/
Hi robmm76. I looked at the link you provided. It seems that the reason why AutoFill does not work for the address field is because of the way this field has been programmed on the site. It has been programmed to make type you part of your address and click on the right pair and it would then fill in city, State and zip code. If this field is just a special case.
I hope this information answers your question. If you need more information or help please do not hesitate to reply to this reply.
-
can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box
Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?
Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?
I found this in another thread that you created [*]:
I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?
I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?
-
(Middle button) scroll feature does not work on the new firefox 4. For this reason, so I need to move the scroll bar to move the page. It's very irritating problem, if you are a guy who uses the middle button to scroll. Can you if you please fix this...
Thank you!!!
I've updated to Firefox 4.01 today and the Center knob on my Lenovo T400 does more. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 by http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html , then uninstalled the 'Thinkpad Ultranav Driver' to add/remove programs, rebooted and then installed the update utility and driver (another reboot) and now it works perfectly.
So happy to get it working again.
-
Nokia PC Suite does not work on the Satellite A100-234
I installed the Nokia PC Suite in my laptop (Satellite A100-234) Unfortunately his does not work. The same cable and Mobile is to connect with other computers.
Please send your valuable suggestions.
Hello
Could you please be more specific?
Did you get the error messages or something else?Maybe something is wrong during the installation procedure
So I recommend removing this Nokia program and try to install it again.In addition, I would recommend checking the PC Suite FAQ on the website
-
Pad touch and function Fn + F5 does not work on the Satellite a series
Hello
I just install a windows Vista & I have install the driver after download it from the net, but I found this;
1 - switch between the screen & s-video (fn + f5) does not work but the other work of function (fn)
2 when I put my finger in the right of the mouse pad you have to scroll the screen & at the bottom of the touchpad, it should scroll left & right on-screen, but it did not work
So please tell me the solution if it is a problem of driver or program.
Please give me the direct linkthinku
Hello
What cell phone do you have?
I imagine that your laptop comes with XP and now want to use it with Vista OS.
Please note that you should install the Package Toshiba Vista value added to use all the features of the laptop.
Very important is the pilot of common components and the TOSHIBA Flash Cards.
The Flashcards provides the Hotkey function and function of pitcher who starts the Hotkey function.
Please reinstall!The additional touchpad functionality must be configured first.
This can be done in the control panel-> mouseHere, you should look for the touchpad settings and able to configure touchpad again scroll areas.
Good bye
-
Driver Chicony webcam does not work on the Satellite A200-13O
After the misfortune that occurred to my webcam, I tried to fix it by uninstalling the driver and then put it back in place (by the toshiba Web site).
I did this twice and it does not work,
allthought the pc installed the driver, the camera was not working because a file was for win95 and my pc has vista.After several reboots, I made the following
-Start
-all programs
-camera assistant software
-Right click
-options (the last button in the right click menu...)
-compatibility
-Select work in win95 compatibility
-ok
Sorry for my English, I am Greek and my menu vista also... :))
If anyone wants more details please to contact me.
I hope this could help those in despair...Hello
Yes I would like some details;).
For example: manufacturer who is the camera, it is built, made, he has worked previously, and so on...
So there is a lot to say, have you ever said to the second part, but I'm missing a few things as I've described above. By the way: you can try to recover your machine, if you really need on your camera, but it is really the LAST RESORT.
Good bye
John -
Satellite P100-324 - GPU overheating due to fan does not work in the operating system
Hello world.
While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.
Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.
The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.
This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.
Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).
I saw in your other thread that you have updated the BIOS and you have installed several different OS.
Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.Best regards
-
My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10. Is there a fix for this yet?
I thought about it. The upgrade to Windows apparently damaged 10 HP SimplePass software. Once I uninstalled and reloaded the program, everything started working.
-
Computer is very slow and IE does not work all the time.
I bought a computer from my old employeer. He is doing all sorts of things, or should I say not to do all sorts of things. It is very slow and IE does not work all the time. They have questions arise and ask if the administrator oks things and other things like that. It came with any disks. I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it. Can someone please?
Hello
Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
the former employer to do it for you if necessary.Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
role in this issue. And even the TCP/IP stack might need to be refreshed.What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
-
Fingerprint reader does not work after the laptop awakens from his sleep.
Pavilion DV6-6c15nr
Windows 7 Home Premium
Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.
Hello
Uninstall the software and current driver for the fingerprint reader.
Resources:
Uninstall software in Windows 7Uninstall or change a program in Windows 7
Download and install the latest driver from here.
Download and install the latest version of the software from here.
Maybe you are looking for
-
Cannot load the batteries on the Satellite Pro a series
I have problem where battery not charge, brand new levels and still nothing. The computer still says that it runs on power even when unplugged any help on this would be appreciated. Thank you
-
Can I transfer licenses CAL (NO Terminal Service) of the 2003 server to a new Server 2008? We are to modernize a client from an old Server 2003 to new hardware Server 2008. I was wondering if there re 50 CAL to buy for them, we bought or if we can tr
-
Impossible to install XP SP3 (could not find the file specified)
I looked at and followed the steps described in Article ID: 950717 - steps to take before you install Windows XP Service Pack 3 I do not have Microsoft Shared Computer Toolkit Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows
-
Microsoft Windows network icon missing from my network places
Hello Place of absent Microsoft window network of my network icon. Effect of this unable to access shared folders on the other system. Best regards, AVGP
-
Office Jet 8600 is not repond to OSX Maverick print commands
OfficeJet 8600 is connected via an Ethernet cable to the router and therefore iMac OSX Maverick. Printer has suddenly stopped responding to orders print of all applications, but the app on iMac printer shows this object is to be wrapped and printed.