Number Maximum TMSPE - Jabber Video - users?

Similar Questions

• Integration of Active Directory with telepresence - Jabber video

  Hello

  I would like to have a clarification on the integration of commercials with the existing infrastructure of TP.

  We have A VCS - C 8.x, VCS-E 7.2.2 14.3 TMS with TMSPE.

  We need to have our video Jabber users using their accounts and authentication of the user accounts existing on AD. All the other codecs authentication will be local VCS - c.

  Where can I configure the integration of ads?  The TMS only? VCS - C only? or both?

  Any document that clearly explain this configuration?

  Thank you.

  If you want to check the credentials on the control and Jabber clients video to send their requests for authentication to control VCS, where you have the setup of ADS, you must configure the default and traversal zones to check not the credentials on the highway.

  Regarding your comment on authentication to the highway, just to be clear, before the customer can actually create a record on the freeway, do you want to authenticate, meaning the subzone where they will register to check the credentials, if so, ADS a problem here.  As the video Jabber client will always use NTLM to send its credentials when ADS is used, the highway will be presented with the username/password user name field.  As the highway is not connected to the announcement of check these credentials, it will not allow recording.  Authentication of registration requests always happens on the local server, because that's where the record should be.

  Zac in the discussion below, covers this very well and how to get around it when using ADS and video recording Jabber to Hwy.

  Jabber-video-authentication-vcs-what

• Change of dial in number of TMS for video bridge

  A user request that the wheel (SIP) number of their session video bridge be a specific number.  After you create the meeting, you can go to the TMS conference settings and change the number.  However, it is not actually change.  The number he has been created with is the single dial that will work.  You can go to the MCU and change there, but it shows that the meetings which are currently spend.  This specific meeting is recurring and not for a few days.

  I was curious to know if there is something missing with TMS, that it is not passing the new number to the MCU correctly.  Any help is appreciated.

  Thank you

  As much as I know there is no way to change a conference number in TMS yourself to MSDS to connect endpoints specifically to something you want.  I tried and got the same results as you, TMS will always use all that it automatically generated for the road.

• Number of concurrent Sessions per user mismatch with profile settings

  Hello
  
  Version of DB Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  OS RHES 5U2
  
  I created a profile MYPROFILE and set the value of simultaneous (per user) Sessions on 30. DB has rebounded after the creation of the profile. I made this default profile for a specific user 'MYUSER '. I checked that questioning DBA_USERS (select profile from dba_users where username like "MYUSER") I checked v$ session with this particular user after awhile and noticed that it showed 34 sessions. Certain ASSETS and the INACTIVE.
  
  My question is, if I set the maximum number of concurrent sessions per user on 30 to myprofile and made it the default for MYUSER profile, so how did I am still able to see more than 34 sessions of myuser regardless of the State? I don't know if it's relevant or not, but the IDLE TIME is set to 15 minutes.
  
  Thank you for your help
  
  Published by: user560883 on July 4, 2010 12:45 AM

  user560883 wrote:
  Hello

  Version of DB Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  OS RHES 5U2

  I created a profile MYPROFILE and set the value of simultaneous (per user) Sessions on 30. DB has rebounded after the creation of the profile. I made this default profile for a specific user 'MYUSER '. I checked that questioning DBA_USERS (select profile from dba_users where username like "MYUSER" ;)) I checked v$ session with this particular user after awhile and noticed that it showed 34 sessions. Certain ASSETS and the INACTIVE.

  My question is, if I set the maximum number of concurrent sessions per user on 30 to myprofile and made it the default for MYUSER profile, so how did I am still able to see more than 34 sessions of myuser regardless of the State? I don't know if it's relevant or not, but the IDLE TIME is set to 15 minutes.

  Thank you for your help

  You have the parameter resource_limit = true ? You must do so before test sessions_per_user. You can do the following,

  alter system set resource_limit=true;
  

  After that, yet try and post comments.

  HTH
  Aman...

• TYPE A USER ID NUMBER BRINGS UP AN ID USER STORED WHICH SHOULD BE DELETED... WHERE IS STORED THIS USERID... IMPOSSIBLE TO FIND IN THE FILE OF SAVED PASSWORDS

  TYPE A USER ID NUMBER BRINGS UP A STORED USER ID AND THE PASSWORD COMBINED IN A SINGLE STATEMENT.
  IT SHOULD BE DELETED.
  IMPOSSIBLE TO FIND ALL REFERENCES TO THE WEBSITE IN THE FILE OF SAVED PASSWORDS.
  WHERE ARE STORED THE DATA COMBINED ID AND PASSWORD, AND HOW IT CAN BE CLEAR.
  THE WEB SITE IS NOT SAVE INFORMATION.

  It would be built-in to Firefox form fill.
  Click the field, and enter a character. If something comes along,
  highlight the fact that by using the arrow keys. Then press DELETE (Mac = delete the shift).
  Repeat if necessary.

• Is Jabber Video for iPad EoL´d?

  I didn t has seen the announcement about the Jabber video for iPad has retired, but the app is more on the Apple Store.

  I can only find the new 10.5 Jabber, but this one Don t allows to register for the VCS + TMS.

  A tip how can we download the latest Cisco Jabber video app? or how to make the 10.5 to enroll in the VCS?

  Thank you

  A new version (9.3.9) is out this weekend - including iOS compatibility 8.

  https://iTunes.Apple.com/au/app/Cisco-Jabber-video-for-iPad/id540243083?Mt=8

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Jabber video for Ipad (former Movi) on the Appstore

  Hello

  Does anyone know why the video Jabber for Ipad (Movi for ipad) was removed from the appstore? I know customers who were trapped in the new Jabber for Ipad (with CUCM and IM & P), but still works on the old infrastructure VCS and TMS. So now their customer no longer works.

  Is this temporary like in the past with iOS 6 or is it standing like iOS 9 was released and the product is not supported on it?

  What was any communications from Cisco on removing of the AppStore. If Yes, could it link me a cause document or Web page, I can't find anything in the notes version or documents related to the former client.

  Thank you

  Cecile

  JabberVideo aka Movi is EOL/EOS so he would sooner or later, well, no, he's not back - take a look at this thread post and note by Patrick; https://supportforums.Cisco.com/discussion/12607856/i-cant-find-Jabber-video-Telepresence-AppleStore-iPad

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Please explain number maximum support of the virtual machine by exsi 5.5 and exsi 6 service console

  Please explain number maximum support of the virtual machine by exsi 5.5 and exsi 6 service console

  What exactly do you want to know?

  For supported máxima, see one of the following documents:

  https://www.VMware.com/PDF/vsphere5/R55/vSphere-55-configuration-maximums.PDF

  https://www.VMware.com/PDF/vsphere6/R60/vSphere-60-configuration-maximums.PDF

  Full documentation can be found at:

  https://www.VMware.com/support/pubs/vSphere-ESXi-vCenter-Server-pubs.html

  https://www.VMware.com/support/pubs/vSphere-ESXi-vCenter-Server-6-pubs.html

  André

• How we happen to know that the number of presents for this user database

  How we happen to know that the number of presents for this user database.
  Both those who are connected and not connected yet.
  
  Thanks in advance
  
  Concerning
  SUBJ.

  using v$ session...

• Total number of active and inactive users

  Hi all
  
  I have to rely
  
  The total number of users.
  Total number of active and inactive users.
  Total number of users after 90 days of inactivity:
  
  I went through the thread below, but it shows the modules. but not taken into account.
  http://download.Oracle.com/docs/CD/E10530_01/doc/EPM.931/html_esb_techref/MAXL/DDL/statements/dispuser.htm
  
  Please let me know how to write MaxL command or another way to count users.
  
  Thank you
  Alain

  A possible solution is to load the file in excel and then use formulas to work the numbers you need.
  If this isn't the case, excel then you could use a scripting language to run the file and the desired output number.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Caller ID of VCS Jabber Video on SIP Trunk on the phone

  Hello, Netpros.

  I am trying to find a way to show a caller E.164 ID when a call to a video client Jabber a UCM or a PSTN phone.

  VCSC/E 7.1; 13.2 TMS, configured TMSPE.

  We have a VCSC > SIP Trunk > UCM (8,6) > H.323 GW w / PRI voice configured for the composition of and the PSTN destination.  We do this, so the Jabber client video can be used as a softphone, and so we can have transparent FindMe to voice and SNR to the video in either sense.  In TMS, we have a model of implementation configured with an address of the video, ILA and unit address.  He pulls ad office phone number for video of Jabber users.

  From what I read here:

  http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_FindMe_Express_Deployment_Guide_X7-1.pdf, we should be able to see the caller ID when you call send out an ISDN GW.

  «This section describes how to use FindMe with calls are routed through an ISDN gateway (for example, when you call a mobile phone, or any other destination accessible ISDN).» If VCS has Caller ID (Applications > FindMe > Configuration) defined to use the ID FindMe, the identification of the appellant presented will be the user E.164 phone number. »

  UCM SIP config is vanilla, by

  ttp: / /www.tandberg.com/collateral/documentation/Deployment_Guides/Cisco_VCS_Ci...

  However, when a video call Jabber is directed to a University Complutense of MADRID registered phone, we get "unknown caller".  When to call us directly to the PSTN, we see that the BTN from the PRI.

  What is strange, is that if we call another client of Jabber of VCS (with all the same problems), directly into a phone UCM via Internet on URI (for example [email protected] / * /) through the VCSE, we see the caller ID name.

  Thank you, all!

  Joshua

  Hi Joshua,.

  At present the VCS will only send caller E.164 id to a GW of H.323 ISDN, which is registered for VCS.

  There a feature request in the order book to define if E.164 Caller ID or name/Video address on a per-zone basis. This will also be sove the question when the call is to go on a SIP connection, as in this case, a remote ISDN GW.

  Thank you

  Guy

• Authentication Active Directory for Jabber video

  Hello

  I managed to configure my control of VCS to join my AD domain name, so now my video Jabber authenticate accounts with the credentials of the AD.  I downloaded certificates appropriate for VCS to make connecting to AD is encrypted TLS.

  I use the Provisioning Extensions on X7.2 and TMS 13.2.1.

  Before the addition of the VCS to the domain AD and passage to TMSPE, Movi accounts would authenticate on the (Agent of TMS) database on the VCS control, regardless of the authentication request came control VCS, or has been transferred from the highway of VCS.  Now Jabber clients trying to authenticate on the highway to VCS fail if the default Zone or subzone default are set to "verify the credentials.  If I change the settings of the area to be "treat as authenticated"... it works, but they are not actually be authenticated, since no matter what password is accepted.  Of course, this isn't a good idea.

  So my question is basically, what I'm missing?  Am I supposed to join the motorway VCS to AD as well?  Given the external location of the highway, it's a less-than-desirable solution; No there is no way to pass authentication to AD requests to the VCS control?

  I read 'Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-2' and the relevant sections of the Admin Guide VCS and I don't know if I'm missing it but I can't find information to lead me in the right direction here.

  Hi Anthony,.

  It is not necessary to join the motorway to listing! Highway should pass any authentication control and should be able to register without the need to join the domain.

  Ideally, requests authentication from the highway should be sent to the control and control put in question the user for credentials.

  for authentication of clients jabber by highway, you should put the area crossed the vcs control to check the credentials and on Highway information, keep the default zone do not check the credentials.

  Also check if you set the ADS services on the highway? If so, turn it off...

  Thank you

  Alok

• TMS Provisioning Extension required for Jabber Video

  All,

  I'd check that commissioning Extension is not required for TMS (14.x) allow video exterenal Jabber users to participate in a video conference on a microcontroller.  These will be not registered in VCS video external Jabber users.

  Thank you

  John

  I guess video Jabber users will be registered to someone else is VCS or using the free video by Cisco Jabber service?  If so, that Yes, you don't need TMSPE, it is only necessary if YOU are commissioning and providing video Jabber service to others.

• Problem with directory of TMS to Jabber Video distribution

  Hello

  Recently, I have a problem with the configuration of the directories for video Jabber clients. Looked through a few topics that seem related but found them a little different.

  In short: TMS 13.2 configured Extension commissioning and off FindMe, VCS Expressway 7.2, Cisco Jabber client video v4.5.

  Steps performed:

  1. a new user has been created (inside Provisioning > users) with [email protected] / * / and Device_Address_Pattern =

  [email protected] / * /.

  2. this user got automatically in the Provisioning directory (which already had a few other contacts inside)

  3. I have connected the video Jabber client with the new account, but can not find all the users via the search field within the customer (TMS illustrates usage of licenses) put into service.

  It is easy to manually assign phone book on a device by using the function 'Set on systems. But what do I do to get his Jabber Client video inputs?

  Thanks in advance!

  Hi Alex

  In the management of directories if you click on a directory there are Access tab control that allows you to assign access to directories for users.

  Then you must make sure that you the directory server URI in the configuration of the user model commissioning as [email protected] / * / .

  Make sure then that the TMS and the VCS is synchronized, you should now be able to search for directories if everything is correct.

  / Magnus

• Jabber Video (Movi) always showed "search failed: Server error.

  Hi, Experts

  I have install X7.2 VCS, 13.2 TMSPE, I install the 'putting into service Phone Book' by 'Supply' and marked the group in access control, but the always shown video (Movi) Jabber client ' search failed: Server error "when I search contact.

  This is because your default subfield is configured with the setting "do not verify the credentials" authentication.

  Presence and directories to work properly, the default subfield must be configured as "Powers to check" (which is the safest) or "Treat as authenticated".

  Please see

  http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-2.pdf for more information on authentication devices and authentication for areas rules.

  -Andreas