Reduce the number of cells displayed by indicator table

Similar Questions

• BEEP and Siebel: limit the number of records displayed in a table

  Hi all
  I use BEEP with Siebel. For example, my XML has a set of 50 activities. These activities are of a different type and different date. Now, I want to show:
  
  5 activities the newer type A in a table.
  5 activities the most recent type B in another table.
  5 activities the most recent type C in another table.
  
  I tried using the position() method, but since I use the same set of activities 3 times it will not work. The reason is that after you sort the activities in descending order of creation date, I could end up having 5 recent activities of type A digit 4, 9, 17, 23 and 31. That's why I can't use <? If: position() < 6? >.
  
  The 'worst' solution would be to create a link of multiple values in Siebel for each type of activity and prior filtering of activity types in the object link, so I could use the solution above to limit the records per table. But it is really more practical in my opinion.
  
  All welcome ideas on how to do this inside the model.

  If you couldn't do something similar to this in your model:

  <=5]?>

  If you wish, send me the sample xml data and a RTF file to [email protected] and I can take a look.

  Thank you!

• Is it good to keep my macbook on charge all the time? This reduces the number of cycles of battery I would have otherwise?

  I have a 2015 13-inch macbook pro Retina display. What is the best way to keep the battery in good conditions? In particular: When should I charge it? Only when the power is low)<20%) or="" anytime="" that="" i="" can?="" more="" in="" particular:="" if="" i="" keep="" it="" in="" charge="" all="" the="" time,="" will="" this="" be="" good="" or="" bad="" for="" the="" battery?="" will="" it="" reduce="" the="" number="" of="" battery="" cycles="" that="" i="" would="" otherwise="" have?="" many="">

  Keep the computer plugged in whenever possible.

  If you keep the computer always connected, make sure that at least twice a month

  Run it on battery until battery charge level falls to about 40-50%.

  Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.

  Trying to keep the number of Cycles of battery low does ' t help.

  For more information:

  Section: To optimize the battery life

  http://support.Apple.com/en-us/HT204054

  Best.

• Reduce the number of ticks on a xy plot

  Hi all

  I have a chart that looks very busy on the x axis.

  Anyone know a way to reduce the number of ticks that only, say 5, are visible?

  Thank you

  Sean

  Like this for example

• Zoom in French - to the acrobat reader do not reduce the number of words per line to fit screen

  Zoom in French - to the acrobat reader do not reduce the number of words per line to fit as screen micorsoft Word knows to extend this feature is the free acrobat reader - or only exist in a paid product Adobe - and how is - this product called from adobe on its less expensive way for Windows 10 .it.

  You don't ask to convert to word. You seemed to ask if you could zoom in on a pdf document and have the text reformatting "As Microsoft Word can do". The answer is higher. Drive abyy fine will not redistribute the text either. Is neither Adobe Acrobat

  But you touched kind on your answer. With ExportPDF or Adobe Acrobat, you can convert the PDF file to a Word document that will be redistributed as you want. But this is not a pdf file. It will be a Word document.

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• VM is to have 1 CPU, can we reduce the number of core for CPU.

  VM is to have 1 CPU, can we reduce the number of core for CPU.

  
  

  
  

  In this article: the number of cores per processor in a virtual machine (1010184)

• How to reduce the number, do not round

  Hi all
  I want to reduce the number for the 2nd symbol. For example, if we have the real value - 100.556 I want to show 100,55. I tried with the format as a mask:
  

  select  to_char(100.555,'FM999G999G999G999G990D00') number from dual;

  result:

  100.56

  expected result:

  100.55

  .
  
  
  Any ideas?
  

  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
  PL/SQL Release 11.1.0.7.0 - Production
  "CORE     11.1.0.7.0     Production"
  TNS for Linux: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  Thanks in advance,
  Bahchevanov.

  Use the TRUNK:

  select  trunc(100.555, 2) from dual;
  

• reduce the number of columns in the case query

  Hi all
  
  I'm running on 10 G R/2.
  
  I have a query that produces columns with the number of steps.
  
  SUM (CASE WHEN LTRIM (RTRIM (W_O)) = 'ROKOLBIN' THEN 1 ELSE 0 END) AS "O_ROKOLBIN."
  SUM (CASE WHEN LTRIM (RTRIM (W_I)) = 'ROKOLBIN' THEN 0 OTHERWISE 1 END) AS "I_ROKOLBIN."
  sum (case when LTRIM (RTRIM (W_O)) = "SYLVAIN", then 1 else 0 end) as "O_GULURU."
  sum (case when LTRIM (RTRIM (W_I)) = "SYLVAIN", then 1 else 0 end) as "I_GULURU."
  sum (case when LTRIM (RTRIM (W_ON)) = 'PURE' then 1 else 0 end) as "O_PURE."
  
  I want to reduce the number of columns to 2,
  
  A column is for Division.Division can be O_ROKOLBIN, I_ROKOLBIN, O_GULURU, I_GULURU, O_PURE
  The other column is Subtotal.Subtotal are the sums as above, SUM (CASE WHEN LTRIM (RTRIM (W_O)) = "ROKOLBIN", 1.)
  
  Can anyone advie how I acheiev it.
  
  Thank you.

  Hello

  CrackerJack wrote:
  ... Data are from Jan 12 to today, 1 million + records, that's why I'm unable to provide comprehensive data and simply copied an example of data.

  Nobody wants you to post 1 million rows. 10 lines can be many. Just examples of data make sure that validation really produces the results you post.
  >

  I copied data from 16 Jan just differentiate different dates.

  I also tried trunc, but who has still not the sum of each divisions.

  Highlight a few places where the query I posted produces erroneous results and explain how to get good results in these places. Give concrete examples showing how to get the correct results of the sample data.

• Reduce the number of div tags

  What I could do to reduce the number of div tags used on this page?

  http://www.lash-it.com/what/kayakexamples/kayakexamples.html

  Why do you have comment float: left;?

  .examples_row img {}

  / * [disabled] float: left; */

  }

  Try this:

  {.examples_row}

  height: 300px;

  Width: 880px;

  }

  .examples_row img {}

  float: left;

  }

  .examples_row h1 {}

  do-size: 12px;

  text-align: justify;

  top of the margin: 50px;

  margin left: 260px;

  }

  .examples_row p {}

  margin left: 260px;

  }

• How to set the number of lines displayed in a classic report when running?

  Hello
  
  Our client has several hardware configuration standard customer and want to allow end-users to choose their 'view profile' at the time of the connection. This "display profile" would contain some predefined values for these configurations material and supposed to give various parameters that must set the number of lines displayed in a classic regional report.
  
  I tried to provide parameters on the report of the region, but he has refused to accept anything other than numeric values. Is it possible to do?
  
  Best regards, Tamas

  The link is about the closest correlate in the documentation to the description of the attribute Number of Rows (point) .

  Looks like you tried to write - in vain - a name string or change of item in the attribute Number of Rows . The attribute Number of Rows (point) is the one that can actually do. For a list of items in the application, click the icon of the flashlight next to her.

• How to count the number of columns in an oracle table using sql

  How to count the number of columns in an oracle table using sql

  You must put the name of the table in capital letters

  As

  SELECT COUNT(1)
    FROM user_tab_columns
  WHERE table_name = 'EMP';
  
  or
  
  SELECT COUNT(1)
    FROM user_tab_columns
  WHERE table_name = UPPER('Emp');
  

  Concerning
  Arun

• How to reduce the number of significant digits after the decimal point, not only displays for example, 0.12345678 convert to 0.123 in all cells

  I imported a. Table TSV having 4000 rows and 20 columns in numbers, by changing its extension .tsv in .txt. Then, drag and drop in numbers.

  The actual values have too many significant digits to be useful and may be beyond the capacity of the numbers to calculate or to find 262.825892344384

  If there is a way to have the SS (4000 x 20) 'Numbers' to reduce the values currently stored in the entire document or a particular column or row

  262.825892344384 to 262.8259 I am not interested to the value, but the value actually stored and used for calculations.

  I have a table that uses the formula of round and takes as input the data that you have imported.  Then you can select the data in the round table, copy

  then paste the data in the original table by using the menu item "Edition > paste formula results.

  

  Ibn chart at right

  B2 = ROUND (Original Data::B2, 3)

  It's abbreviation dethrone select cell B2 and type (or copy and paste it here) the formula:

  = ROUND(Original Data::B2, 3)

  now select cell B2, copy

  Select the cells B2 to C2, dough

  A2 = Data::A2 Original

  Select cells A2 through C2, copy

  Select cells A2 through the last cell in column C, paste

  now select the data in the table 'Data rounded' copy

  Select the corresponding cells in the original table, select the menu item "Edition > paste formula results.

• Classic report limit the number of rows displayed

  Hi all
  
  In my application, I have a classic report that displays data from a simple query. For layout reasons, I want to limit the number of display 5 instead of the default value 15. I looked in several forums and they told me that I have to set the number of lines in the report attributes.
  
  But it doesn't have what I want. I'm using APEX 4.1.0 on Oracle 11 G database
  
  My question is: How can I limit the maximum number of lines in a classic SQL report.

  Hamertje16 wrote:
  I tried already to 5 the number of lines and number of lines (point).

  Do not set anything in number of lines (point). This is used to identify an element of the page containing the number of lines to allow users to control it. Remove * 5 * from here.

• Change the number of lines displayed in a report

  Hi guys,.
  
  I have a query that will return 3 rows, so I set the number of lines on the screen of the report attributes for 3 and everything was fine.
  
  I then changed the query to return 4 lines and also changed this attribute to 4, but the report stubbornly refuses to display 4 - only 3 old.
  
  Is there something I missed here?
  
  See you soon
  
  Steve

  I find the runtime application logging and lumbering solves this. It does not seem to be cached for your session by default, Yes.