Number of attempts of bad

Similar Questions

• Number of attempts Spin SMART MK2035GSS (200 GB, 4200 RPM) on the Satellite A200

  Hi all,

  I have a warning of HDDlife program on my hard drive * TOSHIBA MK2035GSS * (200 GB, 4200 RPM):
  concerning the health of hd.
  SMART * Spin retry count *: 114 (value), 30 (threshold), 100 (worst), 0 (RAW). Status: 49%

  I don't know the values for this setting before, because of that installed a few days ago.

  I don't think it's a good news for me, but maybe it's a strange feature of this hd for the first time?

  Laptop * Satellite A200-1IZ *. Purchased 11 months ago.
  Work time (by HDDlife) HD: more than 5 months.

  Can I appeal to the computer in warranty service (12 months)?

  Thank you for the answers!

  * Screenshot of HDDlife S.M.A.R.T. parameters *:
  http://img239.imageshack.us/my.php?image=toshibasmartparameterscf6.gif

  * Screenshot of benchmark by HDDtune *:
  http://img382.imageshack.us/my.php?image=toshibabenchmark1tl5.gif

  hdtune.com/hdtune.html

  Post edited by: Esuol

  Hello

  The life of the HARD drive is not known to me, but to be honest, I wouldn't be worried.
  I think the number of attempts to spin shows you how fast the disk HARD turns at the moment and it looks like that it spin at 49%. Probably it of not necessary to turn faster because performance of flow is 100%.

  However, I would recommend always creates a backup of your files stored on the HARD drive. It is always advisable, even if the HARD drive works ok.

  Good bye

• Tracking number of attempts to correctly answer a question of MC

  I have a number of MC and T/F questions where I need to track the number of attempts it takes for a user to answer the question correctly. The T/F is easy because I am only allowing 1 attempt, so I can check to a pass/fail. However, the questions of MC allow 2 attempts. If a user he responds correctly, I need to know if it was the 1st or 2nd time and it seem not to be a way to track it (not that I can find).

  I created 2 user variables for each question, the answer choice 1 and 1 for the tests, but he doesn't seem to be a way to fill until attempts maximum has been reached that defeated the whole purpose.

  There must be a way to fill a meter of attempts until the maximum has been reached. Of course, Captivate is followed that somewhere, but I can't find a system variable that seems to fit.

  I am tracking also attempts to quiz and need to aggregate the question through the quiz attempts total attempts, but let's first. I'll be happy to get information of attempts to question once at this stage.

  I use 8 Captivate.

  Any help would be greatly appreciated.

  Post edited by: Karen Moyes I changed the subject line and tried to better explain what must happen.

  Hello and thanks for responding.

  I am aware of the events that I have to use the quiz questions, I just regret the fact that, while in captivity titles nicely your attempts to answer for you so that you can add different success and failure of the options, there is no easy way to retrieve this info.

  I figured out how to track attempts to question without having to change the number of attempts on the issues of choice of MC, so I kept the 2 attempts. I had to create a lot of variables and some cases rather complex statements multiple decisions for success and failure to do so, however.

  Now 'all' I have to do is double what effort each quiz attempt, which will not be very easy because I am already bypassing the default of Captivate built to go to the 1st question quiz on the recovery and I have many other customization on some slides that must be taken into account with subsequent attempts to quiz. Once I got that all together, I'll be happy to share, even if it will take a lot of screenshots!

• Max number of attempts in Task Scheduler

  Hi all
  
  I have a little doubt about the Max Retry field in Task Scheduler.
  If the task fails, before changing the status of the task of 'ERROR' the task is retried based on this charge?
  
  1 so it will generate excessive logging, if the logging level is a minimum to begin?
  2 affects the recon events? In other words, it will create recon events for each attempt?
  3 have an effect on the Number and shape of process for which the Task Scheduler is running?
  
  
  Help, please.

  1 so it will generate excessive logging, if the logging level is a minimum to begin?
  It will generate logging

  2 affects the recon events? In other words, it will create recon events for each attempt?
  I don't think that so that it generates events Recon again

  3 have an effect on the Number and shape of process for which the Task Scheduler is running?
  What does this scheduled task?

• How can I limit the number of attempts to print a web page

  I am trying to find a solution to a problem on our network.
  We run several kiosk machines that allow customers to print documents and web pages. However, we find that we are wasting a lot of ink because of the user frequently sending the same print job on the printer.
  Yesterday we had someone print more than 70 pages, because they just keep clicking on print.
  I tried looking for an add-on that would solve this but was not able to find one.
  My question is this, is there an internal setting that can be changed in firefox to limit the number of prints is trying to say once every 30 seconds, or even a way to make a dialog box turns on screen saying that the print request is currently dealing and does nor print before completing the task at hand.

  Sorry, there no setting in Firefox to avoid that from happening. Once the user sees the "native print dialog" box (which is seen when you Ctrl + P for print), the operating system and the printer drivers are here.

  I saw something similar to that on kiosk / PC rental stores Office of FedEx, which inform the user of the cost per page, the user wants to send to a printer, and when the user click again to the same pages again, he asked if you want to spend another $x.xx to print a second copy. Would not too different to simply cut the printing of multiple copies of the same document and warn the user of this action.

  My advice is to discuss it with anyone who put in place these kiosks to be with.

• What is the number of attempts to "Auto-connect" in MSDS.

  Hello

  I would like to know, how many times a TMS would attempt a point of termination/MCU while trying to send shout information - before you say

  'Allocate failed, the Conference is not automatically connected.

  The type of conference is auto connect

  Automatic connection: Cisco TMS will automatically connect participants to the date and time specified.

  Hello

  Seems more like a first try and then try to re 3-tent after the initial report and it seems to be the same for the CHT and the MCU.

  So 1 initial attempts + 3 before it says it can not it automatically connect.

  / Magnus

• on question - number of attempts - 2: does not always allow 2nd attempt

  Captivate 8.0.1.242

  Put end, of course, quiz: I do not use quiz recovery option but am allowing the student 2 tries on the issue. In this way, that they failed to go all the way back and take questions. They just get a 2nd attempt on issues that don't miss. I've included a combination of multiple choice questions, multiple choice multiple answers, sequence and drag ' n drop. All types of letting the student takes the question 2 times - with the exception of multiple responses. Sometimes he gives 2 attempts and others not - there seems to be no consistency in when the 2nd attempt is allowed. Multiple answers are set up like this:

  

  What can be done for multiple response questions to systematically give 2 attempts? I'm running out of ideas - and time!

  SMILES,

  Susann

  Reason is that a partially correct answer will not retry. Sorry, it's the "design" of this type of questions.

• Why adobe is unreachable by phone? The number 020 2013331only gives bad music

  Telephone number 020 2013 331 gives only the music. I extended my subscription and it passes from € 11.50 to € 16.50. I get a kind of checking mails, but does not check does not work. I have a subscription education as a teacher at the Hogeschool van Amsterdam. Netherlands. How can I contact an official Adobe employee? My classes start this week, and I work with creative cloud. Maarten van der Burg. < deleted by the moderator >

  Hi Martin,

  Please contact support:contact customer service

  I hope this helps.

  Concerning

  Megha Rawat

• Number of attempted to take up IZ0-204 for Oracle eBusiness Suite review

  I wonder once I have save and pay up IZ0-204 examination fees, how many attempts to take the exam?
  
  Should I pay the tax to reappear in the review, if I failed in the first attempt?

  You may have seen Sun offers which sometimes ofers free times. Don't forget fees of Sun in the Oracle double price for the exams. Oracle continues it charges for review at the lower end of the certiification costs of the review of the market and can not really make this kind of offer. I prefer the approach minmiizing cost Oracle that they double the price and then sometimes provide a re - take free or other stupid reductions.

• SMART reallocated sector count 269, number of reallocated events 20

  I have a Toshiba MK6476GSXN HD about 2 years on my laptop (my computer only).  Recently, I plugged a defective SD/USB converter, which caused all kinds of startup failures.  Before I identified the converter failed, I thought that my HD was dying.  I run cygwin smartmontools and he compared with those of 2 years ago.  To interpret the results, I relied on google with the Wikipedia page http://en.wikipedia.org/wiki/S.M.A.R.T.  More normalized values are better, and it seems that 100 was chosen as the reference value in health for most of the attributes.

  I have attached the columns selected from the smartctl, with the output current (as opposed to 2 years) being a hybrid of switches x smartctl - and - one.  I'm not entirely sure whether 3 of these attributes are abnormal, and these are marked by asterisks triple.  The average marked attribute (#191, G-Sense_Error_Rate) is probably not an indicator of the health of the HD, because errors are due to physical jerks.  The other two attributes are #5 (Reallocated_Sector_Ct = 269) and #196 (Reallocated_Event_Count = 20).  There is no clear consensus on the issue of whether this is bad (for example, see http://superuser.com/questions/26842/can-i-trust-a-hard-drive-that-has-had-to-reallocate-sectors), so I intend to keep an eye on her and migrate off the coast of the HD over the long term.

  I'm afraid the time commitment to do so, as I do occasional snapshots of the user content (admin & non-administrator accounts) selectively using find, tar, and zip on a disc.  I didn't used to use my backup utility Norton $ 60 (from 2 years) because I want to see myself I selected all relevant content and relevant content.  Where this content tends to move with the years.

  Those who have more experience with HD technology can comment on this point, based on the results of smartctl?  Did I miss something important that I have not already noticed?

  

  Hello

  Reallocated sector - I think that's pretty important as an indicator of bad sectors and a dying Player. It is a failure. Those areas pending will be relocated eventually (if your drive has enough spare sectors), or you can backup your data and do a low-level format (to force the relocation of these areas immediately). If your HARD drive has enough spare sectors on the left, you can continue to use it.  It is essential that the drive has failed.

  Number of events distributed-

  Count of remap operations (data transfer to a bad sector in a box special disk reserved - area alternative).
  The raw value of this attribute indicates the total number of attempts to transfer the data of the sectors reassigned to a spare area. Failed attempts are counted as successful.

• Number of question and the navigation sequence.

  Hello and thanks in advance for any help anyone can provide.

  I am using Captivate 5.5, and part of the project is a questionnaire sequence drag-and-drop slide. I have included the ability to go back, because I want the user to be able to go back in the previous section and check the information if they want to. The issue is set to infinite attempts and three levels of failure. Questions are optional and the issue has a clear and a "Skip" button as well as back and submit.

  The problem: when I test the project, I can start the question and use the back button and return to the issue and that works very well. But when I not properly answer the question and THEN use the back button to review previous slides and then return to the question, I am more able to drag and drop the answers. The grey indicator no longer appears, and the answers cannot be moved. I can still use the submit button, but because I can not change the order of response is always bad. I can use the back button, but the issue never becomes mobile. I can use the "Clear" button, but it does nothing. I can skip the question, but it is not very useful because I would like the user to be able to answer the question after reviewing the information and return.

  I don't know about the issue of the scope of quiz, and I click the buttons set up at the beginning and end of the project that are included in the quiz so that I can not leave the scope quiz and mess things this way. But nothing I try seems to correct this problem.

  To sum up, I have a question of sequence, but once the user responds incorrectly and uses then the back button to review information, reverting to the question after it makes the issue frozen somehow, unable to move the responses in the proper order, even if the buttons still work.

  Thank you once again if someone can help me solve this problem!

  I'm really sorry, but that's the way the Question slides are designed to CP5: the number of attempts, you allow the Question level must be exhausted when the user is on the slide. As soon as you leave the question slide will be blocked. Several attempts on the level of play will be always available if you don't let the scope of quiz, but this can be done after completing the quiz, and all responses will then be those deleted, correct as incorrect. This changed to COP6, where sanitation is possible (just answered today such a question in another thread here), and you can access a slide contained a question slide, go back and change the answer.

  Your goal in CP5 is possible if you create custom question slides, but then there is the problem that drag & drop is not available in native mode as you have in the default sequence Question slide.

  Lilybiri

• What websites is displayed in the attempt to access the site Web blocked with parental filter WE

  Hello

  In the activity report that is generated when the family filter is on, I see attempts to access a particular Web site as 450 a week, even if it has been blocked. The number of attempts 450 times means the person has tried to access the site 450 times, or it can be some other reasons? How is the number of attempts calculated?

  Thank you

  Hi Shilpi,

  Thanks for posting in the Microsoft Community.

  is 450 the number of times trying to access the site.

  For more information in this regard, I suggest you to refer to Microsoft article and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-activity-reports-FAQ

  http://Windows.Microsoft.com/en-us/Windows7/looking-for-Web-filtering-and-activity-reports-in-Windows-parental-controls

  Thank you.

• BlackBerry Smartphones dSimple 4-digit password is not being recognised &amp; observed Timeout of security not defining re-creation of my attempts to try again

  Hey all the... I retired my Storm 9530 some time ago (my fingers are too big for the touch screen and key of BB contact confirmation system to the key light blue is lost in my porkers, so needless to say I didn't have much success with the storm) and currently active (on TELUS Mobility) a Tour 9630 I received from a friend as a scrap... I have set a password 4 digit simple twice now and have wiped twice the phone because it will not recognize the password I've carefully matched to each time.  Frustrating!

  Both times I had the number of attempts to set password on 3, the second time, I deliberately set the security option timeout to 1 minute... thinking that if I waited entry password incorrect one or two attempts (in which case it was me the fat-fingering entry somehow), the number of attempt would be at least 3 reset again... She apparently does not exist , so I'm not sure what the purpose of this function is to - 0558PST27NOV12 FFF edit - OK, Security Timeout is how long a period of inactivity to allow before the automatic locking device.

  I searched for 'lock' here and came across an answer to a Post of Thread that describes making attention to the key hold them used when setting the password... I can only think of two ways to enter figures: using the 'alt' key and then press the appropriate number pads, or, using the "sym" key and scrolling for the numbers right, one by one... However, now, during my third session of creation of password on the freshly wiped phone, I realize that because the entered password characters are masked, I can simply seized letters instead of numbers all along, a capital letter followed by three lowercase letters - is probably what its likely?  I can't believe it didn't come up here several times - edict of 0558PST27NOV12 FFF - OK, I decided that all the characters went to letters and must have been all lowercase password connection PC GUI-based unlock success of the device.

  in any case, this policy of scorched earth to wipe my phone whenever I get incorrect password (somehow) seems harsh... I would like to have a simple lock on the device security, but not at the risk of it being deleted so arbitrarily... If I lost that a dishonest person found, chances are they would just wipe it and get this trigger themselves or, if they were honest, but curious, I'd get it back... wiped.

  Is there another way to lock and unlock the phone w/o to the draconian measure wipe?

  Thank you, FFF

  Hello

  It is excellent that you have discovered, by searching on this site, the solution to your problems of password entry. Play well!

  As for your desire for a less drastic locking... feature that would require a separate application to do (I don't know if they exist). After all, the BBs are safer mobile devices available... to diminish the ability of the device lock feature would reduce the overall security of the device.

  In my humble OPINION - the device itself is a mere commodity. The data on it, however, are priceless... and protect the data from prying eyes is essential for safe keeping the device in place. Fortunately, RIM provides several FREE methods to backup your data to be used to restore any catastrophic event. All users of BB to use these methods.

  Good luck!

• Attempts to connect SSH VCS

  I was occasionally see a large number of attempts to connect SSH on our VCS, suggestions to prevent this?  It looks like a port-scanning and something is just try random attempts.

  So talk to your network guys, its really not preferred having the unfirewalled vcs.

  In addition to what I wrote, cutting the cable and ignoring the messages it does not so many things to do.

  Although the ignorant is not the best method :-)

  It's a typical thing to what you see, there are many scripts running on the internet, probably

  not directly aimed at your organization, but at least open and vulnerable systems.

  This is related to all systems connected to networks open, not only for VCS.

  Another typical analysis is sip ports which can also hold attempts to carry the external ISDN calls.

  Patrick: Please note my posted messages under the stars below and define the thread if it is a response.

• BlackBerry smartphones only a release attempt left - help

  I have a BB 8900 that is locked to Orange in the United Kingdom and wish to change Vodafone that I have an Internet access account.   I do not have an account with Orange and so no SIM card Orange.

  I got a number from a provider of release and it does not work.  I went to another who gave me four numbers to try, including the one I already had and none of them worked.

  I carefully checked the IMEI number, and that's okay.

  I have now only one attempt left and as I understand it, once that is used, there is no chance.    If I get a new Orange SIM card that will restore the number of retries to 10?

  What can I please.  Any ideas would be welcome.

  Since my first posting, I did a factory reset using KB 18998 on the center of technical solutions of BB, that involves to connect the Blackberry to the computer and using the command line.  The factory reset was done in ok, but the number of attempts is one unfortunately. Is it possible in which the number of attempts can be restored to 10 please.

  Managed to get it unlocked. A highly specialized procedure that had to be done very carefully, because there was only one attempt left and there is no way to return.  The Unlocker is highly recommended and helpful.

  www.unlockdata.co.uk who also trade under TeleGo Ltd (company based in the United Kingdom)

  The problem with unlock codes, with which I was provided does not work with 2010 security and MEP-07723-007 should be used instead of MEP-07723-003.  (don't ask I don't know what that means).

  A very tough guy.