Max number of attempts in Task Scheduler

Similar Questions

• No mapping between account names and security IDS made mistake by attempting to use the Task Scheduler

  I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks

  Hello syncere99,

  1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?

  The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error 1068: Task Scheduler cannot start, impossible defragmentation

  I tried to defrag my sister's computer and ran into a problem.  Defragmentation wouldn't because Task Scheduler would not start.  Long story short: operating system Windows 7.  My attempts to solve the problem, there are messages that I continued to receive:

  "Windows would not start the Scheduler Service on the Local computer.

  and

  "ERROR 1068: the dependency service or group could start."

  Please, I need help.  Any ideas?  Do you need more information?

  Thank you in advance,

  Laura

  Hi Laura,

  Open windows control panel, open administrative tools, and then open Services.  First check both of these services.

  Remote procedure (RPC) call  This service should show started and startup type must be automatic.

  Windows event log                    This service should show started and startup type must be automatic.

  If you need to change the settings of the two services above, right-click on the service and select Properties.  Select Automatic from the drop-down list and click on apply.  Once finished, click on the Start button to see if the service starts successfully.

  
  

  Task Scheduler                            This service should show started and startup type must be automatic.

  If you have made changes, see if the disk defragmentation utility will now work.

  Let me know if this does not help the issue.

  Kind regards

  DP - K

• TASK SCHEDULER

  TASK SCHEDULER
  (Vista Home Premium SP1)

  When you attempt to assign a TASK to run, do the following, when I click on CREATE a BASIC TASK

  Task Scheduler service is not available or the folder does not exist. Check that the service I have running and that the folder exists.

  Shows Task Scheduler and its dependencies (STARTED) running services. I don't know if a folder, if necessary, is missing. -TA

  Hi PC31,.

  I have a few questions so that we can better help you.

  Have you ever been able to create a task?
  Something has changed on your system lately?  For example; Have you installed new software or updates?

  You might want to try to restart the Task Scheduler service.  To restart the service, follow the instructions below.

  • Click on the round to Start
  • Type in the box start the search services
  • Click Servicesand select run as administrator of
    If you are prompted for an administrator password or a confirmation, type your password or click continue
  • Right click on the Task Scheduler Service and select Restart

  If this does not resolve the problem, you can use the System File Checker tool.  Please follow the instructions below.

  To run the System File Checker tool, follow these steps:

  Click on the Start ORB and type cmd in the box start the search

  • Right-click cmd in the programs list, and then select run as administrator.
  • If you are prompted for an administrator password or a confirmation, type your password or click continue
  • At the command prompt, type the following line and press ENTER:

  sfc/scannow

  Windows Vista will now scan all system files and verify their integrity, replace all the files with which it detects a problem.

  If none of this helps, please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Task Scheduler catastrophic failure (error 0x8000FFFF)

  Over and over again, while I'm in the Task Scheduler, I get a stating stop error "catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))", followed by "the Task Scheduler service is not available. Task Scheduler will attempt to reconnect to it. "Can anyone decipher this and tell me what I should do to remedy this situation?

  Brandon Taylor

  Brandon Taylor

  Hello

  Added Scheduled tasks are
   
  "C:\Windows\Tasks" where C: is the drive where Windows resides.

  You shouldn't have to deal with tasks that have been added to the default Windows ones.

  Tasks need to be added and removed in the Task Scheduler, although the backup registry
  using Restore Points create should work. This is because each is assigned a SID.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  In the register of scheduled tasks (added) are located in

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule

  and several subkeys of this key.

  ----------------------------------------------------------------------------------------------

  I'd do that for eliminating corruption is at least a partial cause of the problem.

  1 follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================

  You can also use WinPatrol - free to remove scheduled tasks added

  WinPatrol - free
  http://www.WinPatrol.com/download.html

  More information:

  Description of the scheduled tasks in Windows Vista
  http://support.Microsoft.com/kb/939039

  Task Scheduler 2.0
  http://msdn.Microsoft.com/en-us/library/bb756979.aspx

  How to create a task in Vista Task Scheduler
  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  Create the event triggers in Vista Task Scheduler
  http://www.TechRepublic.com/blog/Windows-and-Office/create-custom-event-triggers-in-Vista-Task-Scheduler/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Failed to create task scheduler error log... Event ID 412

  Original title: windows edition vista Home premium... Error log... Event ID 412... Task Scheduler service failed to start triggered by computer startup... Additional data... Error value 2147549183

  Also, when trying to open the Task Scheduler to message... The image of the task is damaged or has been tampered with

  dabf8524-213d-4B2F-8c28-216053942221

  6db14b86-dc09-417f-B9E4-8ea3e1d3cad3

  5e741641-d6b4-4A05-BE04-d909bd185b49

  Reminders-Nat

  MP Sceduled Scan

  Thank you for any information you may be able to help with this problem

  Thanks, Nathan

  Hello

  
  Have you made changes on the computer before this problem?
  
  Try the following and see if it helps.

  Method 1:
  
  I suggest you delete the related corrupted image in this folder and see if the problem occurs
  Commonly, Task Scheduler task image is located in:
  a. in Windows Explorer, navigate to the folder below.
  C:\Windows\System32\Tasks.
  b. remove the related items.
  c. try to create a new task and check if it helps.
  Method 2:
  
  I suggest to remove the item from the following location registry and check if it helps.
  
  a. click on the Start Menu.
  b. type regedit in the search box and press on enter.
  c. If the application for leave, click on continue to open the registry editor on the left pane, navigate to the following:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tasks.
  d. remove the registry concerned items.
  e. close the registry editor.
  f. restart your computer.

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

   
  Reference:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/task-mcupdatescheduled-the-task-image-is-corrupt/a0a25592-2683-E011-9b4b-68b599b31bf5
   

• Task Scheduler gives an error "catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)).

  I run Windows Vista - 64 bit.

  When you open the Task Scheduler, I get 2 exceptions:

  "The task schedule service is not available." The job scheduling will attempt to reconnect to it. »

  and

  "Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)).

  I did basic stuff like the restart Task Scheduler service, restart the computer, etc.. Problem persists.

  Answers are greatly appreciated.

  EDIT: Looking at the services once again, I see that the service is "started" but is more stoppable.

  Hi GosuSheep,

  Follow the methods and check them off below if it solves the problem.

  Method 1:

  Scan the file system (CFS) auditor. This command will launch immediately the Windows File Protection service to scan all protected files and verify their integrity, replace all the files with which it detects a problem.

  Link, please refer to: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  Method 2:

  Run the disk check in Windows Explorer

  a. double-click my computer and then click on the system drive.

  b. click on properties, then Tools.

  c. sous-verification of errors, click check now. A dialog box that shows the check disk options is displayed.

  d. Click to select the automatically fix file system errors check box and then click Start.

  e. If you receive the following message appears, click schedule disk check:

  f. Windows cannot check the drive while it is in use. You want to schedule the disk check to occur the next time that you restart the computer?

  g. restart the computer to start the disk check.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Task Scheduler: several "Image is corrupt or has been tampered with." Guests after downgrading from win 10

  Hey all,.

  After trying 10 Windows for a bit, I decided to downgrade (via "Go back to Windows 7" in the control panel-> update of the security & -> Recovery Windows 10). Downgrade succeeded had no problem (at least at first glance), but for a number of tasks in the Task Scheduler, I am presented with the following message:

  "Image is corrupt or has been tampered with."

  I know that many of these tasks are not associated with Microsoft and others, but there is a lot I don't recognize yet. Having research this problem the only resolution is to either restore a previous backup or remove corrupt task (and restore if possible), however they contain is the problem, I'm not sure who I should restore (if any) and the restoration, any help would be greatly appreciated.

  Listed here are all tasks afflicted (half I recognize as Microsoft non - joint moulding at the top):

  ------------------------------------

  Uninstaller_SkipUAC
  Uninstaller_SkipUAC_Adam
  SmartDefrag3_UPdate
  Razer_Game_Booster_AutoUpdate
  Autoupdate1428970808
  ISM-UpdateService-4e00205a-2ab1-4423-8f77-cc25b82cde1d-Logon
  ISM-UpdateService-4e00205a-2ab1-4423-8f77-cc25b82cde1d
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000UA1cfe8d182f5048
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000UA
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000Core1cfea8d16814bdc
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000Core
  GoogleUpdateTaskMachineUA1cfeba514c17243
  GoogleUpdateTaskMachineUA
  GoogleUpdateTaskMachineCore1cfeba513c0c761
  GoogleUpdateTaskMachineCore
  Update driver Booster
  Reader BoosterSkipUAC (Adam)
  CCleanerSkipUAC
  Update BitDefender product Data_A17FD818A96743FAB28AC221BEB4B2C8
  AdvancedDriverUpdater_UPDATES
  Adobe Flash Player PPAPI notify

  UpdateRecordPath
  StartRecording
  SqlLiteRecoveryTask
  ReindexSearchRoot
  RegistrySearch
  RecordingRestart
  PvrScheduleTask
  PvrRecoveryTask
  PBDADiscoveryW2
  PBDADiscoveryW1
  PBDADiscovery
  OCURDiscovery
  OCURActivate
  ObjectStoreRecoveryTask
  MediaCenterRecoveryTask
  mcupdate_scheduled
  mcupdate
  InstallPlayReady
  ehDRMInit
  DispatchRecoveryTasks
  ConfigureInternetTimeService
  ActivateWindowsSearch
  HotStart
  BackgroundConfigSurveyor
  RacTask
  WindowsParentalControls
  SystemDataProviders
  SessionAgent
  GadgetManager
  AutoWake
  IpAddressConflict2
  IpAddressConflict1

  ------------------------------------

  Task of Bitdefender (Bitdefender product Data_A17FD818A96743FAB28AC221BEB4B2C8 update) I don't know what to do as I had reinstall Bitdefender in Windows 10 but was not necessary after downgrading - problematic because of the recovery should only have Windows and not restored Bitdefender done this task still pertain also to currently installed product?

  Thanks in advance

  I just came across another post on Microsoft Technet: Task Scheduler is broken after the downgrade from windows 10.
  Dave Green - MSFT wrote a program to discover and fix problems with Windows scheduled tasks. You can find it, as well as sources and an explanation of what he done, here: https://repairtasks.codeplex.com/

  There is also a difficulty my Task Scheduler here called

  I have not tried one of these

• Task Scheduler does not work on Windows 7 Ultimate

  I tried to start planning the task on Windows 7 Ultimate. The Scheduler tasks window and the message will then appear that "the Task Scheduler service is not available. Task Scheduler will attempt to reconnect to it.

  After clicking on OK button the Task Scheduler app stays on, but I'm not sure it works...

  Services applet shows this "Task Scheduler" service started and in automatic mode.

  Any help would be greatly appreciated!

  Thank you for your solution. In fact, I found a easier:

  1. backup tasks under folder C:\Windows\system32\Tasks

  2 remove all the tasks in the C:\Windows\system32\Tasks folder

  3. then add tasks one by one.

  I found this task under M:\Backup\Task backup\Microsoft\Windows\Media Center called mcupdate_scheduled, the message appears. Given that I do not care much for Media Center I does not simply restore this task

  Thank you!

• How to taskkill all the open running program using Task Scheduler?

  I already know the command "taskkill /f /im notepad.exe" or n *...

  But how to kill any process running in the task (ex > process and automatically process background execution..).

  program to kill only with the windows open...

  If I run taskmgr.exe program alone and add task annex taskkill, add the arguments: /f /im t *.

  It must end only taskmgr.exe, not activate end taskeng.exe, taskhost.exe process...

  Finally, I want to know only to close all windows opened using Task Scheduler or by using another program that can be.

  When you have a number of tasks of the same name, then you must use their PID to kill selectively.

• How to use Windows media player with the windows Task Scheduler (7)?

  Original title: why it is so difficult... question of windows media player 12

  You want to use Windows media player with windows (7) Task Scheduler.   We have a pc, everything that appears on the screen is also pumped to our community cable channel, normally a slideshow in loop is the show, however, sometimes via a scheduler interrupt the slideshow to play a video (say a video of our last Board of Directors meeting) and to make videos, ideally the slideshow returns.

  Using Microsoft software, in this case, Windows Media Player v12.0.7601.18150, Task Scheduler 1.0, two things must happen.

  1 Task Scheduler launch a video in fullscreen / top of window.

  2. when the video is finished, wmp is closed.

  Well, 1 works fine.  The Task Manager launching wmp in full screen.  And a framework of wmp switches to allow a session of wmp be on top.

  However, a short time after launch wmp cut the screen down to a smaller version.

  And 2. closure of WMP fails to occur.  He remains on the screen waiting for human input.

  Any input appreciated.

  Charlie

  For "cuts WMP down to a smaller version", right click on the video game (during playback) and deselect ' auto Player size to contain video.

  For number 2, define your point of Task Scheduler task for the "end of task after X minutes" and therefore the value of X.  Then it will kill the instance of running Media Player after a large number of minutes.  So, it will absolutely immediately when the video is done playing, but it will be within 60 seconds and will be at least to remove WMP and let your slideshow be visible again.

• VBScript does not run in the Windows 7 Task Scheduler 'execute if user connected or not' is checked.

  I'm trying to run a vbs file using a batch file windows scheduled in the Task Scheduler in windows 7.  The vbs runs under the Scheduler if the option "run only when the user connects" is checked.

  When I go to 'Execute if user or not' task does not, either manually (by command file) or through the schedule.

  The vbs is a project of SAS Enterprise Guide.  These scripts, vbscripts worked in Windows XP.

  This is the vbscript code (I don't know anything about vbs, this is generated from SAS for EXAMPLE):

  Option Explicit
  Dim app

  Call to dowork

  "Stop the app
  Otherwise (app IsNot Nothing) then
  App. Quit smoking
  Set app = Nothing
  End If

  Sub dowork()
  On Error Resume Next
  '----
  "Start Enterprise Guide by using the name of the project
  '----
  Dim prjName
  Dim prjObject

  prjName = "------network patht\SQL_tst.egp" ' name of the project
       
  Set app = CreateObject ("SASEGObjectModel.Application.4.3")
  If Checkerror ("CreateObject") = True Then
  Exit Sub
  End If
     
  '-----
  "Open project".
  '-----
  Set prjObject = app. Open(prjName,"")
  If Checkerror ("app. Open") = True Then
  Exit Sub
  End If
     
         
  '-----
  ' run the project
  '-----
  prjObject.run
  If Checkerror ("Project.run") = True Then
  Exit Sub
  End If
     
             
  '-----
  ' Save the new project
  '-----
  prjObject.Save
  If Checkerror ("Project.Save") = True Then
  Exit Sub
  End If
     
  '-----
  "Close the project
  '-----
  prjObject.Close
  If Checkerror ("Project.Close") = True Then
  Exit Sub
  End If
        
  End Sub

  Function (fnName) Checkerror
  CheckError = False
     
  Dim strmsg
  Dim errNum
     
  If Err.Number <> 0 Then
  strMsg = "error #" & Hex (Err.Number) & + "\n" & "as" & fnName & + "\n" & Err.Description
  'MsgBox strmsg' Uncomment this line if you want to be notified via MessageBox to errors in the script.
  CheckError = True
  End If
          
  End Function

  Hello Carolyn111,

  I suggest that you post in TechNet in the official Scripting Guys Forum.
  Click on the link here to post your question. They would be better able to answer your question.

  Thank you

  Marilyn

• Error "task BackgroundConfigSurveyor: the task image is damaged or has been tampered with." When I click on Task Scheduler

  Original title:

  When I clicked on Task Scheduler I got the following error message: "BackgroundConfigSurveyor of the task: the task image is damaged or has been tampered with."

  When I click on the OK button and try to go I had error messages and I need to get out the Task Scheduler.  I tried to fix by restarting my computer once again by clicking Task Scheduler - result error messages persist.  Help!  How can I 'corrupt' Task Scheduler?  Please give me detailed instructions.

  Hello

  You did changes to the computer, before the show?

  Method 1:

  Run System File Checker analysis and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Check out the following link.

  MS10-092: vulnerability in Task Scheduler could allow elevation of privileges

• My "Task Scheduler" will not display the running tasks since the update to Firefox yesterday.

  When I use my task scheduler and select "Display all running tasks", I get "unavailable". The task successfully registered last history was immediately before moving to Firefox 23. What you've done!

  I uninstalled Firefox and installed after a reboot, and now everything works again with 23 installed Firefox. The real shame is that most users don't even know enough to even check their planner of tasks or the event viewer for the problems.

• Cannot enable Task Scheduler

  I have a HP Pavilion MS227 with Windows 7 Home Premium. Try to activate the Task Scheduler, so I can defragment. When I right click on the Task Scheduler in system, starting services appears not highlighted so I can enable it. I ran antivirus and software anti malware programs with no luck. Any suggestions?

  Hello

  I suggest you ensure that all your Services have the boot by default settings, but you need another computer running Windows 7 64 bit to export the registry data of.

  Another method to do this would be to download the file at the link below (downloads are towards the bottom of the page) and then merge it with your registry as described in the article.  Note:  Generally, it is not a good idea to add registry files downloaded from the internet, but these are good - you can also check the entries that will be merged beforehand uncompressing the file, then open it in Notepad.

  Windows 7 SP1 Services.

  Services of Windows 7.

  When finished, restart the PC.

  Kind regards

  DP - K