Number of calls received are displayed on two different phones

Similar Questions

• Limit the number of calls between areas of VCS/subareas?

  Hello

  I wonder if there is a way that we can limit the number of calls between two subareas, areas or VCS.

  The script as below:

  VCS-E (owncompany) < -----neighbor/traversal/dns="" zone="" over="" internet------=""> > VCS-E (partner)

  My intention is to limit to 5 video calls from VCS-E (partner) so that the 6th call (dial in endpoint) will be blocked.

  I know that we can control the total bandwidth between areas using links & pipes but that does not stop the remote end to lower their rate of recall and deal with several endpoints.

  Thank you.

  Hi Hafiz,

  have you tried to disable the 'downspeed by mode of appeal"in a configuration of Bandwidth?

  try disabling the "downspeed" by call OFF mode under VCS config-. > bandwidth--> configuration.

  This will not allow the calls get the downspeed but it must block because of insufficient bandwidth.

  Thank you

  Alok

• Outlook Express problem: receiving e-mail on two different computers

  I use Outlook Express to send and receive e-mail on two of my computers. Both are connected to the same sever internet account. My laptop is connected to wirlessly modum and my office is connected to the same cable modum. If Outlook Express is open on my laptop, I receive e-mail on it & my office also weither Outlook Express is open on this topic or not. If Outlook Express is open on my desk & not on my laptop, I receive e-mail on it and not on my laptop. Emails received on my desk when Outlook is not open on my laptop never materialize on my laptop. It's as if they are intercepted by the office. Are there settings that I can change on computers? My ISP Internet says it's a matter of Outlook not an internet issue. Can anyone help?

  If both computers use the same e-mail address, on both machines:

  Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server.

  On a single computer only, make sure to delete messages after X days to satisfy your allocated space that you get from your server.

• Concatenate the date and time that are stored in two different date columns

  Hello

  I have to select date two columns from two different tables a date and another over time.

  I want to concatenate these two columns and format the result form dd/mm/yyyy hh24
  

  But I get error invalid number

  For example

  create table as datetime

  (select to_date (' 21/01/2014 ',' dd/mm/yyyy') as dt, to_date('08:00','hh24:mi') like double MC

  )

  Select to_char(dt||) TM, "dd/mm/yyyy hh24") of datetime

  I use oracle 10 g

  Help, please.

  Hello

  Roger wrote:

  ... If you need to take the party date to a date column and the time of anonther part, then you must first convert them to a string, concatenate them and convert them to date.

  You don't need to do this.  What you have described is a way to do it, but this isn't the only way.

  If d1 and d2 are the two DATEs, you can get year, month and day of d1 combined with hours, minutes, and seconds from d2 liike this:

  TRUNC (d1) and (d2 - TRUNC (d2))

  Nesting TO_DATE and TO_CHAR in Oracle, is almost never the best way to do anything.  Oracle provides many functions (for example, TRUNC) to manipulate dates, but also of DATE arithmetic.

• E-mails received are displayed and printed with many information of garbage after the To: line

  For example:
  X key-account-
  X - uidl
  X-Mozilla-status
  ECT

  The menu bar, select View-Headers-Normal

  No menu bar display? Press the ALT key.

• 5508 interfaces with two different switches configuration

  Hello

  I have a 5508 WLC and two 4507 switches that are configured in HSRP.

  Now, I want to configure 5508 interfaces:

  If I want to configure management interface, I need the physical port card

  Question: How can I correspond to two physical port that are connected to two different chassis?

  Configuration interface AP-Manager's optional?

  in this scenario, I'll have to divide AP traffic between two switches (EQ. Assume that 10 aps are, I want to connect to a switch and another 5 to another switch 5).

  How to divide?

  Please guide me to configure the interface in this scenario...

  I have with your answer.

  Hi Vinod,

  Wasn't this already answered here: https://supportforums.cisco.com/thread/2052962 ?

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Skype to go in two different countries

  Can I have a phones registered in two different countries (two different companies phone respectively and two different phones)?

  Yes you can.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• BlackBerry Smartphones personal names in address book are not displayed when they only call the number they call from?

  My number is displayed only in the next issues of appeal.

  When someone I recorded in my book calls address their name used to display, now I get only the number they call from?

  Do I have to change a setting?

  Why the name sop appearing?

  He has a bee a few weeks now?

  I removed the battery and electric bike

  Don't check for updates... any help

  Went to a Verizon Center... no help!

  I can't thank you enough

  I went to the article and he's referring to this:

  It was caused by a bad security parameter, called content protection!

  I enclose the item for later use, it's a real miracle solution, you're very kind!

  Summary of the Causes

  This problem may be caused by one of the following:

• Can't access some emails received on my PC - they are displayed, but cannot be opened

  All emails are displayed on the home page. However, as of last week, e-mails have become inaccessible. They do not show a preview when I click once. And when I double-click on these emails, they share their locations since the last email that I had looked at.

  Try to rebuild the troubled folder index file.
  Right click on the file - properties - file Repair

• iPhone os SE 9.3 (last) why outgoing call attributed to me when I didn't call and actually blocked the number when I received an unsolicited, a week ago the same call?

  Why is there an outgoing call this morning from my iphone os SE 9.3.2 to a number that called my phone Friday unsolicited and which I blocked immediately?  I got no call number.  1. how an outgoing call could be made from my phone?  2 is not a number of blocking prevents the contact incoming or outgoing?  What should do?

  Contact your operator.

• Received calls from Microsoft saying that I received error messages. I have phone #.

  Received phone call telling of Microsoft and they were receiving error messages. I have his phone number of caller ID.

  Hello

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  See you soon.

• Control the order in which the tools are displayed

  Hello

  I have developed a number of folder level JavaScripts.  Each JavaScript displays a button to launch under the "additional tools".

  I was hoping that someone could tell me how I can control the order in which these buttons will be displayed.

  Buttons are displayed in alphabetical order according to the 'cLabel '?  If they are listed according to the date and time the file was created or modified?

  Is there an optional parameter to set the order?

  Thank you

  Linda

  Hello

  Actually, I figured out how to control the order in which appear the buttons below "additional tools".

  There is an optional parameter for app.addToolButton called NPO: which can be used.  I think that the lower the number used, the highest on the list, the button will appear.  This kind of work.  The list of buttons re - arrange themselves, but not exactly the way I wanted to.

  Another thing I did was to rename the JavaScript files. I went before the first file name with a '1 '.   The second file directly under the first I preceded it's name with a number '2' and so on.  That seemed to do the trick...

  All I had to do was probably to rename the JS files with the '1' and '13' numbers and buttons with appear correctly.

  Thank you

  Linda

• Link to graphic images and display the same image on two different series

  I create a brochure DIN A5 landscape (l x h - 210 x 148) that has two pages each Board. Now, I want to connect two graphic frames on two different series (starting page 4 continued on page 5) to display the same image. This image is then next to each other after printing.

  Please take a look at the photos (situation and endresult).

  Could you please help!

  Thank you!

  Phil

  CURRENT situation

  

  endresult

  

  It is not clear to me that you understand that you should be setting this up as a file "facing pages" where each page is half of a spread, not the full-spread by page you started with. In order to impose the pages must be independent of each other in the file.

  From the screen shot it seems that when folded your book will be A5 landscape format, so if this is the case, you will want to set up as faced with pages A5 landscape. Guests will have a single page for the first and last pages, and the rest will be displayed as two-page spreads, just like your reader will see them. Given that this seems to be a folded booklet, you should also keep in mind that the number of pages should be a multiple of 4 - two sides of two pages per sheet.

  To a printer you will probably offer a PDF file, exported as a single document with individual pages in the reading order. If you want to print yourself, InDesign has a module simple integrated tax called booklet print in the file menu.

• Displaying the same Image in two different Image controls

  We use 2 Flex to dynamically display a large image (2 MB +) that is downloaded from an external web server on a different domain. We would like to take that same image, to scale down and post it in along side the version full size of the image in a thumbnail viewer bit that we wrote. This works very well that if I put just the attributes of the source on the two controls Image to the same URL, however, this results in the Image being uploaded twice. Since the image is so large, it is not very desirable behavior.
  
  Another option that we tried is cloning the bitmapData after one of the images has finished loading and then put back the clone for the second image.
  
  private void image1Loaded(e:Event): void
  {
  var bmp1:Bitmap = Bitmap (image1.content);
  Image2.source = new Bitmap (bmp1.bitmapData.clone ());
  }
  
  The problem with this method is that, since the image is downloaded from a server with a different area of our web server, a security sandbox exception is thrown. Because we have no access to this web server, using a crossdomain.xml file is not an option. We looked at the image transmission by proxy through our web server, but given the size of the image, this isn't the best solution either.
  
  Does anyone know how to do what we try to do without generating a security exception? We don't need to change the image anyway, we just want to display it inside two different Image controls without having to download it twice.

  The image must not be downloaded twice. Flash Player is very picky about it because of the problems you mention. If you download an image from a specific URL and then try to do it again, the image will be have been cached.

  However, if you do this: the image can indeed be charged twice. Why? Because the 2 requests are sent at the same time because no image has been loaded. This translates into the image loaded twice.

  If you have a large image to display, wait for it to load once before the second request. Complete event of the Image will tell you when its bytes have been received.

• INBOX HAS 12 MESSAGES ONLY 6 ARE DISPLAYED

  He says inside that I have 12 emails when I click on my Inbox folder, but only 6 messages are displayed.
  For other files, the total is correct, sent mail etc. - number of messages displayed matches the total displayed

  right click on the folder, select Properties, and then on the button repair