Number of entries required

Similar Questions

• Possible bug? : External input (Type, number): failed to enable the 'Entry required' property presentation User Interaction tab

  Are people capable of reproducing the following, or is it just me?

  Problem:

  Impossible to activate the agent of property entry for an external input of type number in a user interaction as is not not but can define required entry of type string. This seems to affect interaction element user as well as the workflow if the number data type is used.

  Version: 4.2.1 but think it goes further than

  To reproduce for workflow entries:

  create a workflow, add entry named TestingNumber of type number and another called TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  To reproduce the element of user interaction

  Drag a box to design workflow user interaction element aon add external called TestingNumber of type number of entry and another named TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  It seems that it was possible before:

  In the workflow to Remove Instant excess in library/vCenter/Virtual Machine management / cliché. In the element of user interaction "Want to delete snapshots" the presentation tab has a number called "numberOfSnapshotLeft" which has a set of properties of entry required. screen attached.

  Meet others similar: http://communities.VMware.com/message/1848542#1848542 last posting mentions a similar case of not being able to establish the required entry of number but cannot string.

  Is this by design or a bug with my environment?

  Properties listed for number	Properties Sample referred to string

  
  Input parameter see theInput parameter see theHide the parameter inputHide the parameter inputPredefined responsesRequired entryPredefined list of itemsPredefined responsesDefault valuePredefined list of itemsMaximum number of valueDefault valueMinimum number of valueMaximum string lengthNumber formatMinimum length of the stringData binding.Custom validationData bindingCustom validationMulit

  It was available in earlier versions of the vCO and was withdrawn "by design". I don't remember what was the explanation. I worked around it by using other properties of validation such as min / max, or a custom validation.

  You can open a support call if you want the official response.

  Christophe.

• Store an uncertain number of entry in the table

  Hi, I am new to java, and even if I make a practice of the input of entrance of the store array I have a question like this:
  
  If we want to use the table, we must create the table and require that give us the size of the array.
  
  For example, if I know I will have ten full entries, I can simply store an array like: int [] intArray = new int [10];
  
  But what happens if we are not sure about the number of entries, it could be 10, it could be 20.
  
  Can I create an array with an uncertain size? Or I shouldn't use table to store the entry?

  Collections. And more specifically lists.

  Tables are fine when they are good, but especially you should use Collections. And in this case you should use list.

  List myints = new ArrayList();
  myints.add(1);
  myints.add(15);
  myints.add(-3);
  myints.add(6);
  // etc
  for( int i : myints){
    System.out.println(i);
  }
  

  See: http://download.oracle.com/javase/tutorial/collections/index.html

• The number of entries plist should be in/var/db/dslocal/nodes/Default/users?

  The number of entries plist should be in/var/db/dslocal/nodes/Default/users?

  I was checking the files of password on several windows and machines unix to work but decided to check my Mac at home.  When I checked for password files, I found 4 entries in/var/db/dslocal/nodes/Default/users:

  1 daemon.plist - I guess that's for the process system since 'realname' = > [0 = > "System Services"]

  2 nobody.plist - set in the plist as a 'realname' = > [0 = > "Unprivileged user"]

  3 root.plist - defined in the plist as a 'realname' = > [0 = > "System administrator"]

  -It worries me because it has a very small password

  4 #user # .plist - This is the actual user of the file systems

  The problems are that I do not see the other users of the system, and these files can be manipulated to provide a negative person back privileges on my system.

  Thank you

  What you see is correct. There was also about 85 other users whose names begin with an underscore. The short passwd in the root.plist must be ' *', which does not allow the connection.

  C.

• How can I find the number of entries on a Web site when you use 'find '?

  I press Ctrl + F, the "Find" option appears. I type in a text, the 'Search' tab does not show the number of entries. For Firefox 25.0.1, is it possible to find the number of entries using 'find '? This is really essential.

  Thanks for your help!

  Can I afford too, for future versions of FF, the number of entries found in a web page by using the Find must be indicated.

  I'm sure that you need an add-on for that. Maybe:

  https://addons.Mozilla.org/en-us/Firefox/addon/findbar-tweak/

• How does one increase the number of entries in the drop-down list of the address bar?

  It seems that the number of entries in the drop-down list of the address bar is limited to twelve URLS. I would find it convenient that more than twelve years can be shown, but do not know how to increase the number.

  Increase or decrease browser.urlbar.maxRichResults using Subject: config

  • http://www.mydigitallife.info/change-the-maximum-rich-URL-listings-in-Firefox-awesome-smart-location-bar/
  • http://KB.mozillazine.org/about:config

  NOTE: The FasterFox extension may affect the number of items displayed if you have it installed (addons > Extensions).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How to vary the number of entries?

  I have to design a system that reads the data from sensors and the Treaty. Is it possible to change the number of entries without any changes to the program? As by specifying the number of entries and the program adapts. I use labview 2009.

  Also is it possible to multiplex multiple entries?

  Thank you

  Mathew

  Then, the tables are the answer. You can change the number of channels simply by specifying a different channel Liist. If you are using arrays as controls, the table can be fed to a for loop and it automatically indexes the table - element by element. Which could be "demultiplexing" selections.

• How to increase the number of entries in MAC

  Hi everyone, I have a WRT 1900AC and I've reached the limit of 32 entries of MAC for filtering options, we have many more users who must be saved from MAC, anyone know how to increase the number of entries please?

  Tanks a lot, im going to read the info in the links, then ill try
  Tanks for help!

• Limitation with the number of entries in a Tunnel of Split ACL

  Hey Cisco community!

  I am facing a problem with a Cisco hub and spoke to the solution.

  We have 2 Hubs (Cisco 7200-2 for redudancy). All clients have a RADIUS (Cisco 881). The rays are 24/24 reported the 2 hubs (2 dmvpn tunnel) to give us access to our monitoring and support equipment.

  Each talk have a NAT table with a specific NAT range for each talk. That way, we can reach every devices with a single IP address within the VPN.

  For example:

  -Spoke_001 have a range of IP NAT 10.80.0.0 255.255.254.0

  -Spoke_002 have a range of IP NAT 10.80.2.0 255.255.254.0

  ...

  To connect to hubs with our mobile phones, we use the Cisco VPN client. We have different profiles created in the regional centres:

  -Profile Admin with an ACL that allow connectivity with each talk

  -Integrator profiles: which allow connectivity to an integrator to some defined rays.

  So the integrating profile looks like this in the hub

  Configuration group customer crypto isakmp [NAME]

  Touch [password]

  [domain]

  pool [NAME]

  ACL [NAME_VPN_Split]

  !

  Profile of crypto isakmp [NAME]

  Profile of clients VPN Description Group [NAME]

  identity group match [NAME]

  list of authentication of client VPN_Client_AUTHEN

  VPN_Client_AUTHOR of ISAKMP authorization list.

  client configuration address respond

  IP local pool [NAME]...

  And the relationship of this group access list:

  [NAME_VPN_Split] extended IP access list

  IP 10.82.20.0 allow 0.0.1.255 all

  IP 10.82.24.0 allow 0.0.1.255 all

  IP 10.81.238.0 allow 0.0.1.255 all

  IP 10.82.4.0 allow 0.0.1.255 all

  IP 10.82.44.0 allow 0.0.1.255 all

  IP 10.81.242.0 allow 0.0.1.255 all

  ...

  In the access list, we can modify the subnets to reduce the number of entries, but some groups should have access to a spoke with the NAT IP range that we can summarize in 1 line (see example)

  The question we have is: when we have more than 50 entries in the ACL, 51st entry does not work:

  -Customer VPN does not receive the road to this network, the road is not added on the connected PC

  -Even if the road is added manually on the PC, the 51st network ACL is not accessible.

  Do you know why there is a limit of 50 entries in a tunnel "Split ACL?

  Do you know if there is a solution to avoid this problem?

  The problem is that if we can summarize an ACL in less than 50 lines, we will have to create a second profile and know wich one to use for the network that... Not really a good solution.

  Thanks in advance!

  Version:

  ROM: System Bootstrap, T3 Version 12.3 (4r), RELEASE SOFTWARE (fc1)

  BOOTLDR: 7200 (C7200-KBOOT-M), Version 12.3 software (15), VERSION of the SOFTWARE (fc3)

  System image file is "disk2:c7200 - advsecurityk9 - mz.151 - 4.M2.bin.

  Yes, there is a strict limit of 50 split tunnel ACL entries when you set it by using the old-fashioned way of VPN configuration (ie: card crypto).

  If you use dynamic TIV to configure, then you have no limitation for ACL split tunnel.

  Here is an example configuration for dynamic configuration of VTI:

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/sec_conn_vpnips/configuration/15-Mt/sec-IPSec-virt-tunnl.html#GUID-E9EB4518-6269-42E8-908C-57BA5D6334A5

  Hope that answers your question.

• How to get the number of entries in the navigation menu?

  

  How to get the number of entries in the navigation menu? Check the image. What it shows 8 number of customers and 10 products and 10 orders in the list. How to get it?

  --

  Thank you

  Hello

  Create items of the request saying, "CUSTOMERS", "PRODUCTS" and "ORDERS".

  Create the application process that defines these items when loading the page for example

  C1 in select count (*) NTC (of customer_table)

  loop

  : CUSTOMERS: = c1.cnt;

  end loop;

  C1 in select count (*) NTC (of products_table)

  loop

  PRODUCTS: = c1.cnt;

  end loop;

  C1 in select count (*) NTC (of orders_table)

  loop

  : ORDERS: = c1.cnt;

  end loop;

  Components shared Open-> Navigation bar and change:

  In the entry list Label-> customers & CLIENTS.]

• IOM search results: increase the number of entries per page

  Hello
  
  When you search for IOM, ten IM appear on each page. We want to increase the number of entries returned per page. Anyone know if this is possible or not? And, if possible, how it is configured?
  
  Thank you!
  
  Ed

  Check xlDefaultAdmin.properties.

  global.displayRecordNum.value = 10

  You can increase from there.

• serial number of entries in a table

  Hello everyone,
  I have a table where I have for the code group.

  <?for-each-group:current-group();./ID?> 

  Now I'm used to number my entries in the table. So I use

  <?for-each-group:current-group();./ID?> <?position()?> 

  So far, it works fine.
  
  Then I exclude a group where id = discoun

  <?if:ID!='discoun'?> 

  The entry with ID = discoun appear in the report. But the registration number will be
  be omitted. So it can happen, I get the following order:
  1 reduction
  Supplement 2
  4 premium
  
  My problem is, that the number 3 is omitted. The premium of entry should get the 3.
  Andybody know how could I face this problem?
  Thanks in advance
  
  Edited by: user8973846 the 17.06.2010 06:04

  You can try

• Number of entry by using data control counter

  Hello
  I have a simple question :)
  I created a data control using a simple POJO class. I am trying to create a number of entries on the page counter.
  I created an int with getter/Setter in my POJO and generated the DC, but when I fall on the Joint Strike Fighter, I don't have the ability to create a number of entry counter. I tried to create an "Integer" object and a string as well, but no luck.
  
  What I create in my POJO so that when I drop, I have the option of creating a counter of the number of input
  
  Thank you

  Hello

  not all of the ADF Faces components are listed in the ADF link dialog box. So in your case, you create an inputText and then change to a counter. You can do this by selecting the counter in the component palette using the right button of the mouse and move it over the text entry field to change to become a counter. Then during the conversion of the components, then IDE shows you which attributes are changed (for example is no longer available in the new component)

  Frank

• maximum number of entries in "characteristics of writing."

  What is the maximum number of channels in the "write data"? It seems that it is only 16 entries. I have more than 16 parameters in my application. What do you suggest me? I would like to have all of the data collected in a single file.

  The Multiplex module allows to combine several strings into one. In general, use the parameter "by block. The output will be a single thread with all multiplex channels in the block. You can have a maximum of 16:1 multiplexed. Use several Multiplex modules. They do not have to be symmetrical, but do not keep track of how many channels is multiplexed on a single thread.

  In the writing module, click the box to the format Options file (ASCII or DASYLab) - at the bottom of the dialog box, you configure so that it matches how you multiplexes - by block or by value (for example). And then, on the right, set the number of channels is multiplexed in each of the input channels.

  Do this way said DASYLab disabling multiplex the data in the file. You will lose the channel names. You can configure the names of channel for multiplexed channels using the chains. At the bottom of the dialog box, you can assign a global chain for each channel. Tedious, but it can be done.

• Exceeded series number order entry recovery disk

  Order the recovery for Pavilion dv7-1245dx disc. I am in the USA so checked that. Entered the serial number on the purchase order. Returned incorrect number. I tried new and same error. Tried the letter instead of zero/zero - same error. Then, as the number started with NDT I guessed that it might be a Canadian product. Canada to check on the page previous and re-entered serial number. This time, he said I had overcome attempts allowed to enter a serial number. The link for the support was a mistake 404 impasse. Any suggestions?

  Thank you

  Hello

  Make sure you have the correct serial number. by checking the entry in the bios.  To do this, shut down the laptop.  Tap away at f10, you press the power button to enter the Menu of the Bios - on the first page, you should see several details related to your laptop as the model n ° No. and also your serial number.

  If you still have problems with the link (I usually do), try calling HP directly - relevant phone number can be found on the links below.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K