Number of layer effects + table with the names of the effects

Similar Questions

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon

• It is possible to have two tables with the same name in Oracle!

  Oracle Version: 10 gr 2
  
  MS Access 2007, I had to use the 'Export' by which I copy a table (and its data) to an Oracle schema via an ODBC connection. Later, I realized that, during the copy of tables with a mix of lower and upper case names, the table does not copied (exported). But MS Access will give you the message that table obtained export successfully.
  
  MS-Access mess around Oracle data dictionary.
  
  When you issue

  SQL>select * from tab;
  
  TNAME                          TABTYPE  CLUSTERID
  ------------------------------ ------- ----------
  AMStates                       TABLE
  Version                        TABLE

  You will see the names of the tables. But when you try to DESCRIBE or SELECT this table, you will

  SQL>desc Version
  ERROR:
  ORA-04043: object Version does not exist

  You can even create another table with the same name in the schema

  SQL>create table VERSION (X NUMBER);
  
  Table created.

  Why this is happening and how can I bring these items 'non-existent '?

  Hello

  Use

  SQL > desc 'Version '.

  Or

  SQL > select * from 'Version '.

  Or

  SQL > drop table 'Version '.

  To overcome the problems of mixed-case.

• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• How to import a table with the renamed name

  If I want to import a table from a DMP on UNIX to my user where I already have a new version, but I don't want to give up this new version, because I only move files from one to the other, is an import option for importing the table with another name? I want to say I want to import it on the same user, where there is already the MYTABLE table, an older version of MYTABLE by impoting with the new name MYTABLE_OLD, if eventually I can update MYTABLE with some of the old files of the old version MYTABLE_OLD. Is this possible?

  You can't do it directly.

  You can import the Table into a different schema, and then rename the table.

  export and import in the required schema.

  Import DataPump: How to import Table data in a Table that has different name? [342314.1 ID]

  Concerning
  Rajesh

• Drop a large number of tables with the same prefix

  Hello
  
  can you help me to make a script to move all the tables with the same prefix = TEST_LINK_?
  
  Thank you very much.
  Crystal

  Hi crystal,

  Here's something to start. It does not all FK constraints on those tables and assumes that the executor is the owner.

  declare
    pstmt  constant varchar2(255) := 'drop table :t purge';
    vstmt varchar2(255);
  begin
  for rec in (select table_name
                from user_tables
               where table_name like 'TEST_LINK\_%' escape '\')
     loop
        vstmt := replace(pstmt, ':t', rec.table_name);
        dbms_output.put_line(vstmt || ';');
  --      execute immediate vstmt;
     end loop;
  end;
  /
  

  Concerning
  Peter

• Fill a table with the results of the refresh groups

  Hello world
  
  I need a little help.
  
  I'm working on an Oracle 10.2.0.4 on windows.
  
  I have a table I created like this:
  Table name: DIM_REPLICA
  
  COD_SEZ VCHAR2 (2)
  NOME_SEZ VCHAR2 (20)
  FLAG TANK (1)
  DATE OF D_REPLICA
  
  This DB I have 210 discount groups running every night. I need fill this table with the results of the refresh groups.
  
  So when the refresh for example called ROME group runs I need to write on the table the name ROME in the field "NOME_SEZ", a Y or N if the refresh Group has worked in the field of the INDICATOR and LAST_DATE refresh force ran into the field of the D_REPLICA. The COD_SEZ field is a code that I get other things. It is not necessary for the moment. I can add it myself on my own.
  
  Can someone help me please?
  
  I was looking on the tables SYS DBA_JOBS and DBA_REFRESH these data, but I don't know what to take and how to fill the table. Trigger? Procedure? Any help will be great!
  
  Thank you all in advance!

  This forum is for SQL * PLus, questions and your question is about general issues Oracle. You will get a better response by posting your question in another forum - probably the General database instance.

  Please close this thread and start over in another forum.

• update to column values (false) in a copy of the same table with the correct values

  Database is 10gr 2 - had a situation last night where someone changed inadvertently values of column on a couple of hundred thousand records with an incorrect value first thing in the morning and never let me know later in the day. My undo retention was not large enough to create a copy of the table as it was 7 hours comes back with a "insert in table_2 select * from table_1 to timestamp...» "query, so I restored the backup previous nights to another machine and it picked up at 07:00 (just before the hour, he made the change), created a dblink since the production database and created a copy of the table of the restored database.
  
  My first thought was to simply update the table of production with the correct values of the correct copy, using something like this:
  
  
  Update mnt.workorders
  Set approvalstat = (select b.approvalstat
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi)
  where exists (select *)
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi)
  
  It wasn't the exact syntax, but you get the idea, I wanted to put the incorrect values in x columns in the tables of production with the correct values of the copy of the table of the restored backup. Anyway, it was (or seem to) works, but I look at the process through OEM it was estimated 100 + hours with full table scans, so I killed him. I found myself just inserting (copy) the lines added to the production since the table copy by doing a select statement of the production table where < col_with_datestamp > is > = 07:00, truncate the table of production, then re insert the rows from now to correct the copy.
  
  Do a post-mortem today, I replay the scenario on the copy that I restored, trying to figure out a cleaner, a quicker way to do it, if the need arise again. I went and randomly changed some values in a column number (called "comappstat") in a copy of the table of production, and then thought that I would try the following resets the values of the correct table:
  
  Update (select a.comappstat, b.comappstat
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi - this is a PK column
  and a.comappstat! = b.comappstat)
  Set b.comappstat = a.comappstat
  
  Although I thought that the syntax is correct, I get an "ORA-00904: 'A'. '. ' COMAPPSTAT': invalid identifier ' to run this, I was trying to guess where the syntax was wrong here, then thought that perhaps having the subquery returns a single line would be cleaner and faster anyway, so I gave up on that and instead tried this:
  
  Update mnt.workorders_copy
  Set comappstat = (select distinct)
  a.comappstat
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi
  and a.comappstat! = b.comappstat)
  where a.comappstat! = b.comappstat
  and a.workordersoi = b.workordersoi
  
  The subquery executed on its own returns a single value 9, which is the correct value of the column in the table of the prod, and I want to replace the incorrect a '12' (I've updated the copy to change the value of the column comappstat to 12 everywhere where it was 9) However when I run the query again I get this error :
  
  ERROR on line 8:
  ORA-00904: "B". "" WORKORDERSOI ": invalid identifier
  
  First of all, I don't see why the update statement does not work (it's probably obvious, but I'm not)
  
  Secondly, it is the best approach for updating a column (or columns) that are incorrect, with the columns in the same table which are correct, or is there a better way?
  
  I would sooner update the table rather than delete or truncate then re insert, as it was a trigger for insert/update I had to disable it on the notice re and truncate the table unusable a demand so I was re insert.
  
  Thank you

  Hello

  First of all, after post 79, you need to know how to format your code.

  Your last request reads as follows:

  UPDATE
    mnt.workorders_copy
  SET
    comappstat =
    (
      SELECT DISTINCT
        a.comappstat
      FROM
        mnt.workorders a
      , mnt.workorders_copy b
      WHERE
        a.workordersoi    = b.workordersoi
        AND a.comappstat != b.comappstat
    )
  WHERE
    a.comappstat      != b.comappstat
    AND a.workordersoi = b.workordersoi
  

  This will not work for several reasons:
  The sub query allows you to define a and b and outside the breakets you can't refer to a or b.
  There is no link between the mnt.workorders_copy and the the update and the request of void.

  If you do this you should have something like this:

  UPDATE
    mnt.workorders     A      -- THIS IS THE TABLE YOU WANT TO UPDATE
  SET
    A.comappstat =
    (
      SELECT
        B.comappstat
      FROM
        mnt.workorders_copy B   -- THIS IS THE TABLE WITH THE CORRECT (OLD) VALUES
      WHERE
        a.workordersoi    = b.workordersoi      -- THIS MUST BE THE KEY
        AND a.comappstat != b.comappstat
    )
  WHERE
    EXISTS
    (
      SELECT
        B.comappstat
      FROM
        mnt.workorders_copy B
      WHERE
        a.workordersoi    = b.workordersoi      -- THIS MUST BE THE KEY
        AND a.comappstat != b.comappstat
    )
  

  Speed is not so good that you run the query to sub for each row in mnt.workorders
  Note it is condition in where. You need other wise, you will update the unchanged to null values.

  I wouold do it like this:

  UPDATE
    (
      SELECT
        A.workordersoi
        ,A.comappstat
        ,B.comappstat           comappstat_OLD
  
      FROM
        mnt.workorders        A      -- THIS IS THE TABLE YOU WANT TO UPDATE
        ,mnt.workorders_copy  B      -- THIS IS THE TABLE WITH THE CORRECT (OLD) VALUES
  
      WHERE
        a.workordersoi    = b.workordersoi      -- THIS MUST BE THE KEY
        AND a.comappstat != b.comappstat
    ) C
  
  SET
    C.comappstat = comappstat_OLD
  ;
  

  This way you can test the subquery first and know exectly what will be updated.
  This was not a sub query that is executed for each line preformance should be better.

  Kind regards

  Peter

• How to compare the length of the data to a staging table with the definition of the base table

  Hello
  I have two tables: staging of the table and the base table.
  I get flatfiles data in the staging of the table, depending on the structure of the requirement of staging of the table and the base table (length of each column in the staging table is 25% more data dump without errors) are different for ex: If we have the city long varchar 40 column in table staging there 25 in the base table. Once data are discharged into the intermediate table that I want to compare the actual length of the data for each column in the staging table with the database table definition (data_length for each column of all_tab_columns) and if no column is different length that I need to update the corresponding line in the intermediate table which also has an indicator called err_length.
  
  so for that I use the cursor c1 is select length (a.id), length (b.SID) of staging_table;
  c2 (name varchar2) cursor is select data_length all_tab_columns where table_name = 'BASE_TABLE' and column_name = name;
  But we get atonce data in the first query while the second slider, I need to get for each column and then compare with the first?
  Can someone tell me how to get the desired results?
  
  Thank you
  Manoi.

  Hey, Marco.

  Of course, you can set src.err_length in the USING clause (where you can reference all_tab_columns) and use this value in the SET clause.
  It is:

  MERGE INTO  staging_table   dst
  USING  (
         WITH     got_lengths     AS
                   (
            SELECT  MAX (CASE WHEN column_name = 'ENAME' THEN data_length END)     AS ename_len
            ,     MAX (CASE WHEN column_name = 'JOB'   THEN data_length END)     AS job_len
            FROM     all_tab_columns
            WHERE     owner          = 'SCOTT'
            AND     table_name     = 'EMP'
            )
       SELECT     s.ename
       ,     s.job
       ,     CASE WHEN LENGTH (s.ename) > l.ename_len THEN 'ENAME ' END     ||
            CASE WHEN LENGTH (s.job)   > l.job_len   THEN 'JOB '   END     AS err_length
       FROM     staging_table     s
       JOIN     got_lengths     l     ON     LENGTH (s.ename)     > l.ename_len
                           OR     LENGTH (s.job)          > l.job_len
       )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  As you can see, you have to hardcode the names of the columns common to several places. I swam () to simplify that, but I found an interesting (at least for me) alternative grouping function involving the STRAGG user_defined.
  As you can see, only the subquery USING is changed.

  MERGE INTO  staging_table   dst
  USING  (
         SELECT       s.ename
         ,       s.job
         ,       STRAGG (l.column_name)     AS err_length
         FROM       staging_table          s
         JOIN       all_tab_columns     l
        ON       l.data_length  < LENGTH ( CASE  l.column_name
                                            WHEN  'ENAME'
                                  THEN      ename
                                  WHEN  'JOB'
                                  THEN      job
                                     END
                             )
         WHERE     l.owner      = 'SCOTT'
         AND      l.table_name     = 'EMP'
         AND      l.data_type     = 'VARCHAR2'
         GROUP BY      s.ename
         ,           s.job
         )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  Instead of the user-defined STRAGG (that you can copy from AskTom), you can also use the undocumented, or from Oracle 11.2, WM_CONCAT LISTAGG built-in function.

• kindly tell how to use the unique value of a table with the index 0

  kindly tell how to use the unique value of a table with the index 0

  Hi
  
   
  
  Yep, use Index Array as Gerd says. Also, using the context help ( + h) and looking through the array palette will help you get an understanding of what each VI does.
  
   
  
  This is fundamental LabVIEW stuff, perhaps you'd be better spending some time going through the basics.
  
   
  
  -CC
  

• How the values to insert into the table with the command insertion

  Dear all
  can someone tell me how the values to insert into the table with the command insert, I want to say I always use command insert behind my forms on what shutter release button press the button of my save, but today I had a form of 6i, where controls (textbox, combo, etc.) are delineated with directly the table with I guess than the Properties Windows , I created 3 columns in tand 3 text on forms fields, now kindly tell me how to do this fields to fill and do not insert command, I mean directly defined with table column
  
  
  
  Please help me its urgent

  Hello

  If the block is based on your database table, just committed the shape, then changes will be applied to the database.

  François

• How to create the table with the rows and columns using the layout?

  One of my friends advised me to put my site on the mode of provision as it is better than the standard as he said
  but I couldnot make an ordinary table with the rows and columns in mode available th
  y at - there someone who can tell me how to?
  Thank you very much

  Wednesday, April 18, 2007 21:01:38 + 0000 (UTC), "Mr.Ghost".
  wrote:

  > A friend of mine advised me to put my whole site on the mode of disposal as its
  > better than standard, as he says

  Your friend won't. Don't listen to him any more. Mode of disposal creates
  very fragile and rigid code pauses at the first opportunity.

  Gary

• OWB, I need to update the target table with the same field for game/update

  OWb, I try to update the target table with the game and the update on the same ground is this possible. I'm a match merge error indicating that you cannot update and match on the same ground. But in SQl is my selection
  
  Update table
  define RFID = 0
  where RFID = 1
  and ID_processus = 'TEST '.
  
  Can HWO I do this in OWB.

  I have check but in the case later (last one) that he warns no error if you can go with it.
  and I tested it it works

  You can check the first case (from where we start) if it has been warned and then try to run.

• CSS Display table with the bottom border only

  Hi all
  I'm very bad in CSS, I seriously need a style.
  
  I want the table with the bottom border only
  
  I tried like
  < table frame = "below" cellpadding = "2px" cellspacing = "0" style = "overflow: scroll;" empty-cells: show; border: 1px solid #285577; "width ="350px"> ';
  
  but frame = 'below' does not work with IE - 7
  
  Please could give me a solution.
  
  Thanks in advance
  Good bye
  Sonny_starck

  Sonny_starck,

  I don't know what kind of table you need exactly but

  < table style = "" border-bottom: 1px solid #285577; ">"

  should do the job.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• How to update the table with the number management

  Hello
  
  I need as there is a loc_tab of the created table as below,
  
  CREATE TABLE loc_tab
  (
  Country_ID NUMBER,
  country_code VARCHAR2 (3),
  country_name VARCHAR2 (50).
  State_ID NUMBER,
  state_code VARCHAR2 (3),
  state_name VARCHAR2 (50).
  city_id NUMBER,
  city_code VARCHAR2 (3),
  city_name VARCHAR2 (50)
  );
  
  I inserted records like below,
  

  COUNTRY_ID     COUNTRY_CODE     COUNTRY_NAME     STATE_ID     STATE_CODE     STATE_NAME     CITY_ID     CITY_CODE     CITY_NAME
  
            IND          INDIA                    TN          TAMIL NADU          CHN          CHENNAI
            IND          INDIA                    TN          TAMIL NADU          TRI          TRICHY
            IND          INDIA                    TN          TAMIL NADU          CMT          COIMBATORE
            IND          INDIA                    TN          TAMIL NADU          MDU          MADURAI
            IND          INDIA                    AP          ANDHRA PRADESH          HYD          HYDERABAD
            IND          INDIA                    AP          ANDHRA PRADESH          SEC          SECUNDRABAD
            AUS          AUSTRALIA               QLD          QUEENSLAND          BRI          BRISBANE
            AUS          AUSTRALIA               TAS          TASMANIA          HB          HOBART
            AUS          AUSTRALIA               TAS          TASMANIA          CCE          CITY OF CLEARANCE
            AUS          AUSTRALIA               TAS          TASMANIA          BUR          BURNIE

  Now, I wanted to update the table such that all ID columns are updated with running number.
  
  Each ID columns should get incremented so that, for Country_ID column corresponding to "India" If country_id is 1, that there must be one for all the lines with the name as "India". Likewise for "Australia".
  
  In the case of State, she also has the same logic with numbers repeated until the very name of the State comes.
  
  For the city, it of course will hold separate ID only because the name of the city will not get duplicated.
  
  This update must be done in the normal way using simple SQL such as no PLSQL don't like looping, etc... is involved.
  
  Here are the contents of the table, and that's how the table should be updated,
  

  COUNTRY_ID     COUNTRY_CODE     COUNTRY_NAME     STATE_ID     STATE_CODE     STATE_NAME     CITY_ID     CITY_CODE     CITY_NAME
                                          
  1          IND          INDIA          1          TN          TAMIL NADU     1     CHN          CHENNAI
  1          IND          INDIA          1          TN          TAMIL NADU     2     TRI          TRICHY
  1          IND          INDIA          1          TN          TAMIL NADU     3     CMT          COIMBATORE
  1          IND          INDIA          1          TN          TAMIL NADU     4     MDU          MADURAI
  1          IND          INDIA          2          AP          ANDHRA PRADESH     1     HYD          HYDERABAD
  1          IND          INDIA          2          AP          ANDHRA PRADESH     2     SEC          SECUNDRABAD
  2          AUS          AUSTRALIA     1          QLD          QUEENSLAND     1     BRI          BRISBANE
  2          AUS          AUSTRALIA     2          TAS          TASMANIA     1     HB          HOBART
  2          AUS          AUSTRALIA     2          TAS          TASMANIA     2     CCE          CITY OF CLEARANCE
  2          AUS          AUSTRALIA     2          TAS          TASMANIA     3     BUR          BURNIE

  Thank you and best regards,
  Shiva