Number of recording audio

Similar Questions

• Can Notes show the number of records with each folder?

  Can Notes show the number of records with each folder?

  No it can't. It would be nice tho.

• Is Iphone6 - possible to record audio accidentally a voice memo?

  Is it possible to record audio accidentally a voice memo on an iphone6?

  It would be a bit difficult to open the voice memo app and press record without noticing what you were doing, at least in my opinion.

• Best way to record audio from my Mac?

  I want to record audio from YouTube on my Mac - what is the best method?

  I remember I used to connect my iPad to my Mac via a cable, play on my iPad and record audio on my Mac, but I don't remember the steps I took to make (it was perhaps with Audacity).

  Your method seems to require too much work.  I like this soft- http://www.mediahuman.com/youtube-to-mp3-converter/

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• the sound card for the Pavilion Slimline S3300T will allow me to record audio from the internet?

  I have a Pavilion Slimline S3300T. KC833AV prod # #ABA. OS vista Home Premium 32 bit.  The sound card will allow me to record audio directly from the internet?

  The sound card is not big thing to do with it, but there are third party software out there that will allow you to do.

  WaveTap is recommended by LifeHacker.

  Here is an article on their website explaining how to use it:

  WavTap Audio recordings of your computer by pressing a keyboard shortcut

• Copy from HDD to disc results external hard of different sizes but the same number of records

  Backup hard drive to external drive, 800 GB in total. When finished copying the file on the external drive size is smaller than 40 GB, but there is the same number of records.

  Different disks often present of thisdue fragmentation on each disk and the differences in the block sizes used on each disc. As long as all your data are present then there is no need to worry.

• Satellite L500-113 - how to record audio from the Web site?

  I have a L500-113.

  I am the controller program for an Internet radio station and want to record audio streaming from our website. Regardless of the recording software, I can record only since the built in MIC, even if the flow is fortunately playing on my computer. No other recording device is displayed in Device Manager. Surely I can record of built in the card Realtek sound? I installed the latest drivers/Manager Realtek from Toshiba.

  Any help would be appreciated.

  Thank you

  Hi mate

  I think that the laptop supports a Realtek audio chip.
  I have a laptop with the same Realtek audio chip and I can record the audio stream of a Web site.

  I m using a free tool called no. 23 Recorder.
  Google for it and you will find some details!

• Electric trigger DAMA IQ & check for new records to collect an infinite number of records

  Hi all

  I have some difficulties with the help of the trigger edge power IQ & questioning the DAMA if it has samples/records ready for pick up.  I have reviewed the documentation on the support to the screw and the examples provided with the driver of the ACCA and have not been able to solve my problem on my own.    What I'm trying to do, is to have this VI capture periodic RF bursts that are larger than a specified threshold.

  I go to this topic in the following way:

  I put the number of samples I captured (finished) for each burst which crosses the threshold
  I put the number of records to capture to be infinite
  I said that the rising slope and the appropriate threshold
  I have then to validate the configuration of the ACCA and start acquiring
  I have then go into a loop and check the backlog of samples as well as the acquisition is
  If either of the above is true then I get the samples with the IQ extract complex WDT vi
  I continue looping until the user stops the vi with a button on the front panel
  I went on this path that I didn't block indefinitely or for long periods of time

  What I see is:

  I'll take one shot and then nothing else
  what the samples never back above zero
  that acquisition is ever complete
  If I switch out the IQ extraction with equivalent IQ reading and ignore the completion back & I get documents like I expect

  My understanding is as follows:

  Electric trigger IQ does not have to be re-armed in VI
  that each trigger to fire IQ Power will create a new record containing the number of samples that I asked

  My questions:

  It seems that when the number of records is infinite that the acquisition is never considered as carried out when the State of the acquisition is verified, is that correct?
  I receive multiple records pending upward on the ASB using this configuration?
  Why a record number is provided with the back of fetch get VI?
  Why would I pick any folder, but the record of zero?
  I'm doing something wrong here?
  Is there a better way to do this?
      
  Thank you
  Russell

  Hi Russell,

  You are on the right track to get your application do what you want. Instead of check to fetch back, I suggest that lets you read the property node DAMA the "' Acquisition > Fetch > Records made" property to know when a new record was acquired. "

  > it seems that when the number of records is infinite that the acquisition is never considered as carried out when the State of the acquisition is verified, is that correct?

  That is right.

  > I get multiple records pending upward on the ASB using this configuration?

  Yes

  > Why a record number is equipped with the rear of fetch get VI?
  > Why would I pick any folder, but the record of zero?

  You ask DAA for an infinite number of records. File 0 started the first trigger seen. Record 1 to the second outbreak (end of disk 0) and so on.

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• Try to record audio only from a small video clip of a digital camera.

  Try to record audio only from a small video clip of a digital camera.

  How to do it on Vista?

  Hi robt1962,

  Thank you for using answers Forum.

  You may be able to use Windows MovieMaker to extract audio from your video file, depending on the format.

  If you use your favorite search engine and look for "extract the audio from video using windows moviemaker" for more details.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How long can I record audio on windows movie maker? __

  I would like to use the audio in movie maker to record a conversation, but I don't know how long it will record

  Record audio with sound recorder,

  (See help in sound recorder) If you want an alternative to the use of Movie Maker.

  Sound Recorder allows you to record a sound and save it as an audio file on your computer. You can record sound from various audio devices, such as a microphone that is plugged into the sound card on your computer. The types of sources of audio input, you can record from depend on the audio devices you have and sources of input on your sound card.

• Cannot record audio streaming - only microphone listed as peripheral.

  I can't record audio streaming because there is only listed as device micro. I checked in the recording devices, see the disabled devices Show disconnected, but there is nothing except micro it (Realtek High Definition Audio). I downloaded and installed the latest drivers from the website of the manufacturer, nothing changes and I looked in the bios to see there at - it no audio devices listed and (perhaps off), but in the bios, I can't access anything except the date/time settings and password changes.

  Help! :)

  Hello JelenaJovanovic,

  Please provide the make and model of your PC. In addition, the record from the audio device or the stereo mix option is available if the sound card or audio device driver supports this option.

  You can check directly with the PC manufacturer to check if the PC audio device supports the registration of the aircraft.

  I hope this information is useful.

  Thank you

• How can I record audio programs that run through Windows 7 on the sound recorder? Where is the master volume.

  How to record audio programs in windows 7? -in previous versions of windows, I could use the main volume control to select "wave" and that way save audio playing on other programs playing through windows and using windows as a simple sampling devicem - I have a relatek 11 hd audio device/card's directx - in audio devices ControlPanel / / / / material/sound/manage / I see only selection of recording for the microphone or line - how can - record sound through windows 7 - can I buy a cable and put it in the headphone and microphone - I'm trying to address the problem in a way that is now not in windows - I want to play things and recording in a small way - could you provide an answer on how audio intgrates of hardware and software with windows - I can't believe really wanting I could do on the previous windows versions - please help

  Start - All Programs - Accessories - Sound Recorder will launch the utility. You can easily find it by running aid and entering "sound recording."

  Right click the speaker icon in the system tray, select recording devices and set the desired default entry.

• How to get Windows 7 Sound Recorder to record audio from the computer?

  I team with my boss and another customer meetings and we want their registered and we use phone calls from Gmail which means that audio is delivered directly through the internet, and Sound Recorder, I found out but I can't record audio only regular computer unless I Plug one wire in the headphone jack that goes to the mic socket who made the impossible phone call since taking mic is already taken.

  I saw in Windows help can I change the source to be recorded, but it lists only microphones (one built into my laptop is default).

  Is there a way to change the entry from the audio recording of the computer?

  My alternative is to find a cable between the MIC and the sound output in order to hear, speak and record at the same time, which I have never seen elsewhere.

  I also do this all the time.  All what I have to do to set up the computer for that is: -.

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set Rec. reading * as default device

  [* the name of your topic in the recording tab may be different - you just choose the entry that is not a micro device]

  Sound recorder will then record sounds coming through the computer.

  - - - - - - - - - - - - - - - - - - - - - - -

  If I ever want to record from the microphone, I need to reverse the above setting by:

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set the internal mic as default device

  Sound recorder will then record sounds coming through the microphone.