Numbering of the outline (several levels)

Similar Questions

• Book of 10 with several files frame crashing when I change the numbering at the level of the book.

  I built a picture book (image 10) with several files from a variety of books. The files have inlays of text and references to breast and between chapters. When I go to set the numbering at the level of the book - as soon as I click on the Numbering dialog box Set - Framework breaks down and I get an internal error 10024, 6382424, 6369627, 6383085. I have attached a screenshot.

  I take the files on the book and added back in. These files worked fine in the original books, that I copied them from. I can't get the book to number correctly. Help, please.

  Hi, Estelle,.

  Don't know if this is relevant to what you are feeling, but...

  I've encountered similar problems of numbering with several of my books.

  What fixed it finally for me, is that I discovered that some files were overrides of paragraph style (not necessarily related to positions or section heads.

  Once I removed all replacements of these files, numbering issues have been resolved.

  While I use the plugin Tools section , you can scan your files for the substitutions with built-in FM find/replace.

  Kind regards

  Amitai Sela

  Philips Healthcare

• ATTRPARENT dimension of the text attribute to several levels of construction with a rules file

  Hello

  My first post here.

  I'm trying to create the dimension generation rule to create a dimension of the multilevel text attribute and then combine with the basic dimension.

  So far, it is difficult.

  With regard to my experience:

  -J' have a relatively basic understanding of the rules of charge both with regard to the data loads and define the updates - I find this quite confusing area and the documentation does not help that much

  -J' only started using dimensions attribute, so for me it's a new concept, but we are already quite useful in certain applications

  -J' I try to automate the process of construction of dimension attribute, and then associating attributes with the basic dimension

  I use the following documentation as a guide:

  Building size attribute and associate attributes

  http://docs.Oracle.com/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?dotdimb.htm

  and / or

  Work with the attribute multi-level Dimensions

  http://docs.Oracle.com/CD/E26232_01/doc.11122/esb_dbag/frameset.htm?ch21s06s05.html

  (essentially the same source in both cases)

  The ultimate goal is to replicate one of our existing recently created attribute dimensions of a cube to another.

  I built a few versions of the required flat file and the corresponding rules file, but none worked.

  I tend to get the following validation error message:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  As I got stuck so I gave to the current actual attributes and moved on to experimenting with the sample / base cube.

  I built a flat file that is supposed to create a new dimension of text attribute named ABC with two attributes level structure:

  ABC

  A

  AA

  AB

  B

  BA

  BB

  and associate it with the dimension of the product in the following way

  200-10 AA

  200-20 AB

  200-30 BA

  200-40 BB

  The flat file looks like this:

  "AA"      "A"         "200-10"               "A"         "AA"      "200"

  "AB"      "A"         "200-20"               "A"         "AB"      "200"

  "AB"      "B"         "200-30"               "B"         "AB"      "200"

  "BB"       "B"         "200-40"               "B"         "BB"       "200"

  and the rule file has 6 matching columns with titles as follows:

  Level0, LEVEL1 ABC, ABC Level0, product ATTRPARENT0, ABC ABC0, LEVEL1 product, product

  all agree with what the documentation says.

  The first 2 columns are intended to define and create the dimension of the attribute, while the 4 next make association...

  I couldn't the above rules file to validate.

  The same validation error message appeared as previously:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  However when I tried to actually update the outline of the mistakes of dimbuild.err file has been created which gives some additional clues:

  \\ATTRPARENT column 4 must precede a numeric or datetime column attribute association

  Now... Finally the interesting part...

  Back to the documentation...
  

  I don't mind if the size of the attribute is generated and then those associated with step or in two separate steps.

  I try to do both tasks in one step only because that's what the documentation seems to suggest attributes at several levels.

  First of all I read:

  Note:

  If you work with a multilevel dimension attribute or with a dimension of the attribute of the digital type, Boolean, or date, the rules file requires an additional field. See working with Dimensions of the multilevel attribute.

  Yes, I work with a dimension of the multilevel attribute so the above statement applies (I guess) and so I'm going to see what works with several levels attribute Dimensions has to say.

  Then, I read:

  When an attribute is part of a digital multi-level, Boolean, or dimension attribute date, the source data must include columns for all generations or the size of the attribute levels.

  Fair enough... so I do what they say... my attribute dimension is at several levels, so I can assume that the statement above applies...

  So, I build my rule in accordance with the guidelines above.

  And then, as we have already mentioned, I get the error message about ATTRPARENT and when I read, it turns out that ATTRBPAREN cannot be used for numeric or date attribute dimensions !

  I'm totally confused at this point.

  What about the attribute text multi-level dimensions ?

  They are several levels but they are NOT numeric or date those!

  The documentation does not seem to tell what to do in this case...

  Anyone build something like that?

  What is the thing that I'm missing?

  What about

  I'm glad that you got to work. I tested and that is to create the dimension attribute and associate it with the rule of the load.

  You could ignore the construction size manually. Remove the attribute dimension. The rule1 go for the Dimension settings under the definition of Dimension tab. Then right-click on the product and change the properties. On the attribute tab, add 'Test' or whatever you want to call the attribute, and assign the text type. He adds the attribute and associate it with the basic dimension when it create the hierarchy. Note that the rules could actually be reversed where you create members of level 0 and then more later to create the hierarchy.  Of course you must pass the size of the attribute association to the other rule

• Lists at several levels in the text indented

  Hello everyone,

  I use RoboHelp HTML 11 and I have a question about the use of the lists at several levels in the text indented.

  The main text in my headings is indented by 122.7px in order to leave enough space for text boxes that summarize parts of the body of the text in the left margin.

  Now, I want to create a multilevel list style so that I can use these lists in the main text indented. Therefore, I created a "List_Style" paragraph style, which includes the indentation of the main text (122.7px). Then, I created a new multilevel list style, in which each list level is based on the paragraph style "List_Style". In my understanding adopt the indentation of the "List_Style" style, but unfortunately it doesn't. Can someone please tell me why and what I need to do to make this work?

  Best,

  Mr. Fox

  PS: My output will be Responsive HTML5 Layout and printed Documentation and I created all the styles that I use in RoboHelp.

  It is not a setting in HR or a word that will fix it. Word lists are a law unto themselves.

  You can map a multilevel list HR to a word list style. Maybe if you set up a list of words and mapped to that you will get a better result. You must create a multilevel list in a Word template and map that.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• JavaScript for the calculation of tax on income at several levels

  Hello world

  I am writing a script to custom calculation for the calculation of tax on income at several levels:

  1. the income up to $40,000 (20%)

  2. revenue between $40 001 and $60,000 (30%)

  3. revenue between $60 001 and $100,000 (35%)

  4 income more than $100 001 (40%)

  If the income is $ 80,000, tax calculation would be:

  Total tax = (40 000 * 20%) + (20 000 * 30%) + (20 000 * 35%)

  I managed to get the correct calculation for #1 but I'm having a difficult time for the rest. Here is my script to the point #1

  var value = Number (this.getField("Income").value);

  if(nValue<40001) {event.value = math.max (0, nValue * 0.20);}

  }

  else {event.value = 40000 * 0.20;}

  }

  Also, when I tried to change the amounts in the income, the tax has not changed.

  Help, please.

  Thanks in advance.

  I think that you need a script like:

  Event.Value = 0;
  var value = this.getField("Income").value;

  If (value > 0 & nValue)< 40000)="">
  20% of the income;
  NValue = Event.Value *. 2;
  }
  If (value > = 40000 & nValue)< 60000)="">
  30% of income plus 40 000 + 20% of 40000;
  Event.Value = (.3 * (nValue - 40000)) + (.2 * 40000);
  }
  If (value > = 60000 & nValue)< 100000)="">
  amount of 35% more than 60 000 + 30% 20 000 + 20% of the 40,000
  Event.Value = (.35 *(nValue-60000) + (.3 * 20000) + (.2 * 40000);)
  }
  If (value > = 100000) {}
  40% amount plus 100 000 + 35% of 40 000 + 30% of 20000, 20% of the 40,000
  Event.Value = (.4 * (nValue - 100000)) + (.35 * 40000) + (.3 * 20000) + (.2 * 40000);
  }

  To obtain your code, did you check the JavaScript console?

  Understand how interpreted languages handle errors?

• Maintaining the automatic numbering in the text variables?

  I have typeset manuals that often have several levels of headings in a single chapter. The editor I work has a style where the first 3 levels, or of the positions will be numbered, 8, 8.1, 8.1.1. No problem. Set up the paragraph styles with auto numbering, each title to another level added for automatic numbering, and it works like a charm. The only problem is that common titles are also supposed to include these numbers with the topics. The left page, the title of the chapter, is so good because I can just insert the chapter number before the current title paragraph style text variable: 8. "chapter title." But the right page must indicate the chapter number, first number of lower level and title (8.1 "topic"). When I use a text for this variable, the numbering created by the original paragraph style disappears from the topic. If I give the leader running his own style of paragraph numbered on the master page, it will always tell '. " 1,"even when the topic changes because there is nothing for him say to start a new number. For my current project, the first sublevel of the section change every 4 or 5 pages. So I'm hoping someone can help me find a way, I don't have to do it manually. Can inDesign keep autodial? Can anyone recommend a script possible or plug-in? All comments will be welcomed with gratitude!

  camberna wrote:

  I have typeset manuals that often have several levels of headings in a single chapter. The editor I work has a style where the first 3 levels, or of the positions will be numbered, 8, 8.1, 8.1.1. No problem. Set up the paragraph styles with auto numbering, each title to another level added for automatic numbering, and it works like a charm. The only problem is that common titles are also supposed to include these numbers with the topics. The left page, the title of the chapter, is so good because I can just insert the chapter number before the current title paragraph style text variable: 8. "chapter title." But the right page must indicate the chapter number, first number of lower level and title (8.1 "topic"). When I use a text for this variable, the numbering created by the original paragraph style disappears from the topic. If I give the leader running his own style of paragraph numbered on the master page, it will always tell '. " 1,"even when the topic changes because there is nothing for him say to start a new number. For my current project, the first sublevel of the section change every 4 or 5 pages. So I'm hoping someone can help me find a way, I don't have to do it manually. Can inDesign keep autodial? Can anyone recommend a script possible or plug-in? All comments will be welcomed with gratitude!

  Thanks for the question. I saw this problem, but never had the need to work around him... until now!

  Variable text header running InDesign cannot capture the numbering of the paragraph.

  To work around it:

  Implementation:

  To create a character style to be used as a style nested within the lower level paragraph style. For testing and editing, assign a color of character; for use, change the color of the characters None or paper.

  To create a cross-reference format that captures only one paragraph Autonumbering.

  Create a character-style-based running header text variable to capture the reference; insert it into the master page.

  Use:

  * At the end of the lower level heading, insert a special character the end Style nested here.

  Continuation of the nested end marker style, insert a reference to the paragraph, using the single paragraph number format.

  The cross reference will be the color of the characters of the nested character style "fakednumber".

  The variable based on the character style to a running header text will seize the number of referrals.

  * For final hand, change the color of the style of characters fakednumber None or paper.

  Notes:

  Cross reference is placed at the right end of the paragraph of title rather than at the beginning, to avoid moving the header text. If he has withdrawal is sufficient between real auto-nombre of the paragraph and the beginning of the title, it would be possible to insert the cross-reference it.

  * Because the cross-reference occupies space on the line of position even when it is invisible, remember that it does not cause the line to be returned on a new line. You can set the size of character fakednumber style property as a very small, same font size reduce the horizontal scale, in order to minimize the risk of a new packaging line, as well as defining its color to None or paper to make it invisible.

  * When preparing a book for final hand, you can change the character of the fakednumber style definition in the Source of the Style file and synchronize it with all the other files in the book, or you can perform a search and replace across all files in Notepad to replace the instances found visible from fakednumber with the invisible style.

  * To simplify the modification of the definition of fakednumber from the visible to the invisible, consider creating two files of model to this end; one contains the definition of visible, the other contains the definition of the invisible. Load character style definition in the style source, and then synchronize the character on the book styles.

  Mission possible:

  * To simplify this task in the future, nag Adobe do running variable header text capable of capturing the numbering by filing an official request here: Adobe - feature request/Bug Report Form.

  *

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• How to delete all the phone numbers in the blocked list?

  How can I delete all the phone numbers in the blocked list?

  I want to delete a large number of blocked number, but now I can't remove the numbers blocked by one, are there ways to eliminate several numbers or the complete list at the same time?

  Thank you!

  No sorry. The fastest method seems to be to go to settings > phone > blocked (or settings > Messages > blocked) and select the editing mode. You could make a suggestion to Apple that offer more options: http://www.apple.com/feedback/iphone.html

• importing a dxf to the outline layer Board of Ultiboard

  I try to import an outline of the map of another CAD file, but I have several problems.  First of all, with the layer "Outline of the map" selected, if I import the .dxf file it place in white color, while this layer must be yellow.   How to convince Ultiboard is the outline of the map?

  My outline of the map also has a semicircular path in its perimeter;  the entire Board is rectangular, but there is an outline of a semicircle on the side.  When I import the .dxf, it comes out as a full circle.  So no idea what is the problem?

  Thank you

  Hi Jweaver,

  When you import an outline of the map, Ultiboard to import the settings of the DXF file, including the color layer. Often, this color is white in AutoCAD, and so when you import the file, the layer of the Board outline is white. You can check in the Toolbox of design and also change color to yellow.

  Import DXF in Ultiboard has some limitations, which is probably why import is to convert the semicircle to a full circle. The next version of Ultiboard has some difficulties to import DXF, and unfortunately, there is nothing you can do until then. However, I encourage you to post the file DXF here so I can see if the problem is resolved.

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• PowerPoint can't read the outline from

  Here's the message I get when trying to open a Power Point document, I worked over several weeks.
   
  «PowerPoint cannot read the outline C:\...» No text converter is installed for this file type.
   
  I can't open it on the PC, it was created on or any other.

  I think that it has been created in Office 2007, and you try to use and earlier version of office to open it does not support some of the features, but you talk that you cannot open it on the same PC, there was created, which seems to exclude. Any chance you created in Office 2007 and then demoted in 2003?

  But if it was created in office 2007, and you try to open also in office 2007, then it is another problem. It is likely that the file is corrupted.

  To resolve the above error message, follow the listed below as follows:

  1. click on file, then choose Save as.

  2. Save the PowerPoint file to a new destination with the same or a new name.

  In this case, if the file is damaged seriously, you need to restore from a backup. If no backups, then the only way to save is to use the PPTX Repair Kit for repair of pptx file.   http://www.pptx.repair/

• Jump the numbering on the front pages

  I'm working on a several page brochure in InDesign CC2014 and I want to start numbering pages on what is basically page 6, jumping the lid of the numbering and the next four pages after, but I see no way to do it. I played with the numbering and section options, but nothing seems to work. Any help would be greatly appreciated.

  All the pages in your document must have a number assigned to them, but you don't need to show this number on the page.

  As says Willi, create a new section where you want your page numbering to start at 1 (this is called the 'logic' page number or section numbering). ID complain when you exit the dialog box that you already have a page with this number, so it's also a good idea to change the style of numbering for the front pages. Preliminary pages is traditionally numbered with lower case Roman numerals (i, ii, iii...), and I usually use A, B, c... cover and inside cover, with no marker page number on which pages should be numbered in the final doc.

• Lightroom - can I import RAW files, re - order, then change the numbering of the original RAW file?

  Lightroom - can I import RAW files, re - order, then change the numbering of the original RAW file?

  I used two different cameras and several memory cards to shoot a recent wedding. Unfortunately, time of the camera were a different time, so the time of capture does not correctly order them. Obviously neither does the name of the file...

  Thank you

  Natalie

  Yes, after you use Lightroom to correct the capture time in the files themselves, in the library the library module > rename Photo allows you to rebuild all the filenames selected from scratch. Just customize the preset file name. Use the chips here, you can set up a change of name that begins with a numbering sequence (so that they appear in the order you want) and including the Date, hour, Minute, second in addition to other chips or custom text to add to each file name.

• How to create a table of contents of several levels?

  How to create a table of contents of several levels, or at least a TOC of two levels, so that when you click on the sign '+' or something similar to the first level, the second level will increase?

  Select the item/s from the list Table of contents, and then use the arrows that will apear at the bottom of the skin Editor to move them to the right.  This will cause a new point TOC to appear as a cap for all items indented beneath it.

  Be aware that during the execution by clicking on this article of the topic does not operate the game to slide under him.  There is no that expand the group to show slides of the child. You will then need to click on the first slide of the child in the group to trigger playback.  Personally I don't like the way it works, but that's how it is.  Register a feature (like me) request if you want that it works differently in a future version of Captivate.

• The page numbers in the first page must not appear

  Hello
  
  I have a layout unique and for loop, I used @section
  
  Problem is that I have to print the second page numbers. First page should be different. I kniw there is an option called "First PAge" different, but it applies only when we have several pages in the rtf during compilation. not at the time where it generates more than one page.
  
  Please help as it is very urgent for me to deliver the object.
  
  Thanks in advance!

  Just pass the numbering of the pages on the first page of output, using "different first page".
  Neednt you have @section for this purpose.
  delete and use @section instead you want to just have a page break before each group.

  @section as well as "Different first page", will be applied to the first page of each section.

• [as2] Several levels of loading in a main level

  Hi .

  I´d would like to know.

  How could I make a preloader with several levels in as2?

  Can I use loadMovieNum or class MovieClipLoader?

  I want to make a main progress bar, which is loading

  at all levels, not a progress bar for each level.

  How can I do that?

  Thank you

  I changed levelNum and used swfA.length but impossible to change anywhere in the code:

  var swfA:Array = ["" swf1.swf ",...," swfN, swf ""];

  var mcl:MovieClipLoader = new MovieClipLoader();

  var OL: Object = {};

  var currentLevel:Number = 1;

  loadF();

  {lo.onLoadProgress = function(target:MovieClip,bl:Number,bt:Number):Void}

  TF. Text = 100 * (+ bl /(bt*swfA.length) swfA.length (currentLevel-1)) + '% Loaded ";

  }

  {lo.onLoadInit = function(target:MovieClip):Void}

  currentLevel ++;

  If (currentLevel<>

  loadF();

  } else {}

  launch application

  }

  }

  function loadF (): Void {}

  mcl.loadClip(swfA[currentLevel-1],currentLevel);

  }