Numbers with comma in the data Cube Viewer

Similar Questions

• delimiter of comma in the data entry form

  Hello
  
  Is can put the comma separator in numbers of planning entry form? I don't see any option to display numbers with comma separator. Please advice how to make it possible.
  
  Thank you and best regards.

  Hello!

  I think that you can set the decimal separator in the settings of the application; default settings of application; display options. There you can select the separators for the application.

  In case you want to use your own preferences you can do in the workspace: file-> Preferences-> click on schedule-> Display options tab, and then select number of formatting you want.

  Kind regards
  user637777

• Developer reports 11g fails when opening the data model view

  Hello

  I see this on one of my client sites.

  They have just upgraded to 11.1.2.2.0 suite of developer on Windows 7.  The works of developer of fine forms, reports developer opens the report ok, but when you try to use the data model view, the program crashes and closes.

  I checked the usual suspects such as the REPORTS_TMP registry variable.

  This happens when trying to create a whole new report also, therefore seems to be an installation problem.

  Saw someone else this please?

  Tony

  Hello Tony,.

  Then, check this box.

  Hamid

• Need help importing CSV file with commas in the rest of the data

  I have a linux script that gets the CSV files from a remote server and import the data into a table using SQLLoader.
  
  The problem I have is that the data in the CSV files sometimes contains commas in the text field that is interfering with the import and I have no control over what is in the file.
  
  my table:
  
  Create the table my_tab
  * (TIME_STAMP date, *)
  REQUEST_IP varchar2 (30),
  User_id varchar2 (30),
  FACILITY_ID VARCHAR2 (255),
  Number SUBFACILITY_ID,
  DETAIL VARCHAR2 (255)
  *);*
  
  example of a CSV file:
  
  * 27032011 story 232708,162.108.20.61,user123,cstmr_view_hlr_history,0,Viewed with 10 results per page for 1234567890 *.
  * 232737,162.108.20.61,user123,cstmr_view_customer,0,Facility 27032011 [display] selected *.
  * 232744,162.108.20.76,user123,cstmr_add_gprs,0,Facility 27032011 [Add x] selected *.
  * 232759,162.108.20.94,user456,cstmr_hlr_request,0,Facility 27032011 [x orders] selected *.
  * 27032011 added 232806,162.108.20.94,user123,cstmr_hlr_request,2,Customer note: note [x], MSISDN [1234567890] *.
  * 232806,162.108.22.96,user789,cstmr_hlr_request,0 27032011, queue update: Action [46], IMSI [1234567890] old [, MSISDN IMSI [1234567890] *.
  * 232815,162.108.20.67,user789,cstmr_view_customer,0,Facility 27032011 [display] selected *.
  * 27032011 232822,162.108.20.67,user123,cstmr_view_customer,5,Screen ' display customer details ': MSISDN [1234567890] *.
  * 27032011 232702,162.108.20.57,user456,cstmr_hlr_request,0,Queue update: Action [45], IMSI [1234567890] old [, MSISDN IMSI [12345678901], AFN [], [PDPREC] *.
  * 27032011 connection 232825,162.169.22.108,user456,adm_login,1,Successful: user [user_name] *.
  * 232829,162.169.22.108,user456,cstmr_view_customer,0,Facility 27032011 [display] selected *.
  
  How can I get around the commas in the text?
  
  Published by: cinnamon on April 4, 2011 08:07

  There is a way to do it, but it depends on a few assumptions, and (b) you have to jump through hoops to do it.

  First of all, this only works if there is no comma request_id, user_id or facility_id. (if there is, then you're stuck, because there is no way to determine which commas are part of data and those that are separators.)

  Second, he must know if there are any particular character - say | -who never appears in the detail.

  If you can do both of these assumptions, then what you have to do is:
  (1) create an array that consists of a single VARCHAR2 column large enough to hold longer line of your input data.
  (2) to import your data into this table.
  (3) replace the first five commas in each row of the table with. (or whatever your "unused" character).
  For example:

  UPDATE temp_data_table
  SET row_text = REPLACE(SUBSTR(row_text, 1, INSTR(row_text, ',', 1, 5)), ',', '|') || SUBSTR(row_text,  INSTR(row_text, ',', 1, 5) + 1);
  COMMIT;
  

  (4) write a SQL INSERT command to build your target table according to the values separated by the | characters.

  -Don

• Problem with comma in the source of data merge document

  I use InDesign CS6 on a Mac in the Mavericks.

  I created a data source document in Word, saved as a .txt file.  It is a unique field which is the titles of documents. One of the documents has two commas in the title. When I do the merging of data, this page displays only the part of the title until the first comma, and then the merger's going to the next page.

  InDesign aid supposed to include the punctuated title between quotation marks. I tried enclosing the entire title in quotes, and I tried enclosing just commas in quotes. I used quotes and quotes. The result is always the same, the title merges up to the first comma and then going to the next page.

  Usually, Google is my friend, but I could not find all the answers either.  What I am doing wrong?

  When you perform a data merge, it uses a character as the delimiter between fields. The default value is a comma. If you have just a single column of data, with no field to separate, then you can check the Options to Import Show key when selecting your data source and set the delimiter to be something thing-anything! -other than a comma. This will force InDesign to ignore commas in your data.

• Submit the data Smart View

  Hello

  We cube essbase with Smart View 11.1.2.5.500, users put in place their card smart view presentation technique that extract data from their financial model, my question is that

  When users are ready to send data and connect to essbase, forecast data in the spreadsheet disappear, replace data into Essbase (is there nothing in essbase yet obvious), is any way to avoid this?

  I can add leaf with connection to essbase, then copy the value and submit, it works. But of course, it is not very effective.

  I don't miss something in the smart display setting?

  Thank you

  Dan is correct.  It is expected when connecting to Essbase of Smartview behavior.  The work around what he suggests is also one I have my team to use.  It has additional benefits.  You can do your work on a single sheet and then copy - paste special values only to the Essbase submission page.  In this way, you can use the formula to create your presentation, but not the formula on your shipment page.  Then, you can create a page of validation to make sure that the data matches between the two.

• Format long numbers with commas

  Hello

  I have a table with a lot of 4-digit + numbers

  I would like to add commas in the right places, for example:

  2000 should be 2,000

  23783 should be 23 783

  and so on.

  Is there a built in method to do this?

  If not, what is the best way to do this?

  Thank you

  Davey

  Hello

  Use find... Replace with Grep:

  Search: (\d+)(\d{3)}

  change to: $1, $2

  and repeat until each multinumber (7 +) matched

  Jarek

• The data grid view control

  I want to show the number of records in the data on the web form.

  Dreamweave was similar or any data view data grid control abreast of controls to display the data?

  All conscious control of data in the text box or a label that I can link to the data source or I have to use my code to assign the value of my questions?

  Your information and your help is much appreciated,

  Kind regards

  Iccsi,

  At its core, DW is all just a text editor. All the available controls would be based on the server model you are using. I'm not at all familiar with CF, but I don't think he uses complex types "control". It is a scripting language and DW can generate scripts that can create a grid of output.

  There is usually not much CF knowledge in this forum. Specific questions about Cold Fusion could be better managed in the:

  forums.adobe.com/Community/ColdFusion/

• Dependence on the data cube on the fact tables?

  Hello
  
  We have a cube that is built based on a table of facts (with prior calculation of 35%)
  
  The fact table has approximately 400 000 records.
  
  Now I don't want to disturb my cubes but wants to move forward and still changing the data in the fact table, which could include the removal of thousands of records.
  
  SO my question here is how dependent are cube on the fact table data.
  
  The cube stores all the data? Can I go ahead and even to truncate (not drop) the fact table?

  The contents of the cube is not changed until it is built again. So, if you do the following

  (A) complete the table of facts
  (B) create the cube fact table
  (C) Truncate table facts

  Then your cube should always contain the data, and you can question him. The content will change only when you

  (D) create the cube again. At this point my previous answer comes into play.

• ESXi5 - problems with NFS and the data copy store

  Hello world

  I recently moved into a solution fully virtualized for my network, 3 x 5 ESXi servers running on our GigE network.

  First of all, I use all free software from VMware, so vCentre etc is out of the question.

  I have major problems when you try to copy files between:

  • NAS (NFS) to ESXi 5 host
  • ESXi host to the NAS (NFS) 5
  • And using VMware converter between ESXi 5 hosts converter Standalone

  The problem is that whenever I'm transfer between hosts I am struck with the horrible network performance. Even if I use GigE adapters and switches between my hosts I will receive no more than 12 Mbps speed of transfer real (100 Mbit/s connect?).

  On the flipside, if I use virtual guests on the same exact host I can happily transfer data between my NAS (NFS) servers with speeds between 60-150MBps ~ (1000 Mbps).

  Examples:

  Speed of 10 Mbps of transfer of ESXi_1 copy OF NFS data store share ~

  Server2008 (comments, located on ESXi_1) copy OF NFS 75MBps transfer rate ~.

  Server2011 SBS (comments, located on ESXi_2) copy OF Windows share 2008 (ESXi_1) transfer speed 120MBps. ~

  ESXi_2 copy OF NFS data store share transfer rate 5MBps ~.

  Attached (wtf.png) example:

  I copy a file that is located on our NFS share first, it's a 3 GB file to the copy within guest OS (2008), it is indicated in blue - top speed of 80MBps

  I copy the same exact NFS share for the host (datastore1), this is indicated in red - top speed of 7.5Mbps

  The third transfer/s (green) is between the customers of windows on different hosts, transfer a 6 GB file as well as a copy of the 360 MB file - transfers two happily send to GigE speeds with a peak around 40MBps

  I can reflect these results across the three servers without modification. Copies between you will be able to run well enough (not exactly 100% use of GigE) but at the moment where I try to do something to the data store it will just choke at all about a 100 Mbps connection speed.

  The final image (wot.png) confuses me beyond belief. I would try to explain what is happening here:

  • This image shows two times the same exact file transfers, except even machine PHYSICS
  • The first (red) transfer between the ESXi_2 host server and the NFS share using the browser data store and direct download - its top speed is around 8MBps
  • The second (green) transfer between a guest server 2008 running on ESXi_2, download the same file exactly at the exact location using vSphere Client. I mean the same EXACT file; It connects to the NFS drive by the data store ESXi_2 (NFS share).

  Why on earth can my comments directly download a file on a data store connected to NFS GigE clocked and yet the same exact host cannot go anywhere near corresponding to these speeds?

  As indicated in the title, the problem seems to happen whenever I use ESXi datastore browser on the host computer using vSphere Client or between browser datastore ESXi to/from an NFS share.

  No one knows what might happen?

  Is there some sort of restriction on the transfer of files between a host and shared NFS ESXi 5? Whence this bottleneck?

  Thanks in advance for all the help/ideas that guys can throw my way.

  P.S. Sorry for the wall of text, I really wanted to give as much information. as possible.

  What type of storage you have locally on the host computer?

  I have seen this problem with write-through controllers: http://wahlnetwork.com/2011/07/20/solving-slow-write-speeds-when-using-local-storage-on-a-vsphere-host/

• Combining the VM with files in the data store

  I apologize for the very basic question.

  I have a few ESXi servers and I need to associate each VM with the related directory inside the data store and each direxctory within the data with the associated directory store.

  With the command:

  SE connect-VIServer-Server 192.168.1.1 - user root - < password >

  I connect with the server.

  With the command

  Get - vm

  I get a list of all VM with the State and the amount of memory, the number of vCPU

  • How can I get path for each computer listed virtual, to the related .vmx file?
    
  • How to browse the data store, the list of the .vmx file and for each .vmx file, get the name of the associated virtual machine?
    
  • What manual download to find the emanations of the arguments of the command get-vm and qualifying?
    

  Concerning

  Marius

  The Get - VM by default displays a selection of properties.

  You can ask all the properties

  Get - VM | Select *.

  or some specific

  Get - VM | Select name, Description

  You can even access the real object of the SDK VirtualMachine

  Get - VM | Select Name,@{N="VMX; E={$_. Extensiondata.Config.Files.VmPathName}}

  PowerCLI comes with a data store provider.

  It is documented in the vSphere PowerCLI Admin Guide, which is installed with PowerCLI.

  With the provider, you can list the files .vmx on data warehouses.

  To find the name of the corresponding client, you will need to retrieve the DisplayName of the .vmx file field.

• Problem with transmission of the data in table between a driver and a method.

  I'm having a problem with a project for school. We want to take the data in a table, we create in our driver, pass it to the method, do something for her and return the data to the driver. Well, I still get the same error message and after looking at dozens of sites, it seems that I think that I have the correct code... but I still get the same error message. Here is the error message that I've been doing.
  * ola1driver.java:35: get() in ola1method may apply to (char [] [])
  x.get (Dar);
  (upwards arrow pointing between x and get) *.
  
  I'd appreciate any help I'm leaving research to simply looking at my code to try to find the error. My wife things I'm going nuts at the moment.
  
  Here are my two files, the first is the driver and the second method
  
  Take a 2D array and send the data to a method, and then put it back
  import java.util.Scanner;
  class ola1driver
  {
  Public Shared Sub main (string args [])
  {
  Entrance to the parser = new Scanner (System.in);
  ola1method x = new ola1method();
  Char [] [] dar = new char [10] [100];
  char dat_input;
  
  Set up the loop at the entrance a table of 10 x 100 with data imported from a dat file
  for (int i = 0; i < 10; i ++)
  {
  for (int j = 0; j < 100; j ++)
  {
  dat_input = input.next () .charAt (0);
  Dar [i] [j] = dat_input;
  }
  }
  Send the array to the method and displays the original table to compare the return data
  x.Set (Dar);
  for (ip int = 0; ip < 10; ip ++)
  {
  for (int jp = 0; jp jp; < 100 ++)
  {
  System.out.printf ("%n", dar [ip] [jp]);
  }
  }
  
  To get the data of the method and then print the data in the table opposite
  x.get (Dar);
  
  for (int r = 0; r < 10; r ++)
  {
  for (int c = 0; c < 100; c ++)
  {
  System.out.printf ("%n", dar [r] [c]);
  }
  }
  }
  }
  
  Now the method;
  
  Method to receive a 2D painting, reverse the data and then put it back
  class ola1method
  {
  Char [] [] ar = new char [10] [100];
  Char [] [] rar = new char [10] [100];
  
  public void set (char [] [] ar)
  {
  / * To reverse the entries in the table
  to prove that real return
  data was transferred between the driver
  and the method * /
  IR int = 0;
  for (int i = 9; I have > 0; i-)
  {
  for (int j = 100; j > 0; j-)
  {
  int jr = 0;
  RAR [ir] [Jr.] is ar [i] [j];.
  Jr ++;
  }
  
  IR ++;
  }
  }
  Return the data to the driver
  public char [] [] get()
  {
  return of rar;
  }
  }
  
  Published by: Seamus on February 20, 2011 08:25
  
  Published by: Seamus on February 20, 2011 08:26

  Seamus wrote:
  I thought that I sent my method by using the x.set table, and then by calling the reversed with the x.get table.

  x.Set (someArray) in fact to 'send an array to the method '.

  And if x.get () is declared to return an array, then, Yes, it indeed 'retrieve a table. "

  However, these are two completely different methods. The get method doesn't know something on the table sent via the set method unless the game puts a place who knows himself. For example, something like this:

  public class X {
    private int[] arr;
  
    public void set(int[] arr) {
      this.arr = arr;
    }
  
    public int[] get() {
      reverse arr and return it
    }
  }
  
  public class Main {
    public static void main(String[] args) {
      int[] arr1 = {1, 2, 3};
      X x = new X();
      x.set(arr);
      int[] arr2 = x.get();
    }
  }
  

  However, this seems a bit unusual. It is not clear from your initial post, but looks like it is supposed to be a single method that takes the array and it reverses. If so, you could either simply invert the table and returns nothing, since the variable of the appellant and the parameter of the method will all be pointing to the same table object, or you could return a reference to the table that you have received and reversed, or you can copy the table, reverse the copy and return a reference to that.

  I don't know what your needs are, but the point is that it is more common to call a single method to do something like that, rather than separate set() and get() methods.

  Edited by: jverd February 20, 2011 09:36

  Edited by: jverd February 20, 2011 09:37

• Page numbering with prefixes on the footer

  I am able to add page numbers with the prefixes (for sections) as a Visual in my PDF, but cannot add prefixes on my page numbering on the footer. Is there a way to do this in Adobe Acrobat 9 or what I need to get a stand-alone software to do this? Example: 1.1, 1.2, 1.3, 2.1, 2.2, 2.3, etc..

  You can specify a range of pages. In the footer, you can use 1. <1>> for three first pages and 2. <1>> for the following pages.

• can I erase all the data from my old phone with out damaging the data on my new phone?

  My old phone is disconnected from my iCloud, I want to know that the data on my new phone will not erase?

  Provided that you (a) save it to the top and (b) have signed, Yes.

• SQL statement on the point - problem with commas in the chain

  I have a simple report that all the titles of the work of the groups registered in our database.
  
  I pass the title to an element of the apex, then on a second list of page records that correspond to this title of work to help:
  
  and ed.ede_job_title =: P35_JOB_TITLE
  
  If there is that a comma in the title of the post report finds records that match the string until the comma does not appear the full string.
  
  Therefore 'Project Manager, Operations' match all records in 'Project Manager'.
  
  When there is a space left in the title of the post the report also displays the jobtitle without the space left.
  
  My apologies if this is answered elsewhere, I have a search.

  In the definition of report link, put the value of the column between backslashes.

  Scott