Numeric field transforms 0 {null}

Similar Questions

• How to enter text in a numeric field if the value is null

  This is probably very simple, but I can't seem to find the answer. I am using LiveCycle Designer 7.0.

  I have a numeric field that calculates the percentage change between two other fields of digital type. Because the denominator of the equation can be zero, I placed the calculation in a 'If, Then, Else' statement. However, I can't "n/m" text to display in the form, if the divisor (PYGasSales) is equal to zero. Is someone can you please tell me what I am missing in this statement?

  if(PYGasSales ne 0) then
  (YGasSalesVar/PYGasSales) * 100
  else 
  "n/m"
  endif

  Thank you very much!

  You can try using the text field instead of using the digital field.

  Text field can show the text and figures.

  Numeric field can show numbers.

  Danash

• Specify a range for a numeric field

  I have a numeric field in a form. I want to restrict the valid entries to 0-30 only. I tried to use a few tricks script, that I found online, but are all I get errors. Is anyway to do this without using a script? If the script is the only way, I would certainly appreciate help. Thanks in advance!

  -Rick

  On the exit event of the updated field you can put something like the following (make sure that the Script Editor is set to JavaScript):

  If (this.rawValue < 0="" ||="" this.rawvalue=""> 30) {}

  xfa.host.messageBox ("Amount must be between 0 and 30." "" error: an incorrect amount ' ");

  this.rawValue = null;

  }

• Calculation of the numeric fields radio button and checkbox-based response

  I am to change a form that was created by someone else.  I added checkboxes and radio buttons based on the need to form. I would like for the amount of check calculate automatically based on the selection of a radio button.  I've implemented some numeric fields to play with adding the amounts and placed them in the field 'Amount to check', but I can't seem to calculate.  Once I have to calculate correctly, I need to know how to automatically enter a number in the appropriate digital field based on the option button or check box selected.  Here is a picture of what I've put up.  Help, please!  I read all the forums, watched the videos and tried everything.  I'm so frustrated.

  

  Don't know if I have the layout if correct me if Im wrong. I assume you have a radio button group on the top line for the first 3 check boxes and boxes (when the user selects one) for the following 2 lines (where the user can select independently of the other 3 above) with a final calculation at the end to check the amount field.

  You can either place the code on each change of each checkbox/radio button event to recalculate or just do it on the final checksum field. I tried putting a calculate on the last field to check the quantity, and it seems to do what it takes.

  Try this in the case of calculating the amount of check field

  var membershipAmount = 0;
  if ( (RadioButtonList.rawValue == "2") || (RadioButtonList.rawValue == "3") )
  {
      membershipAmount = 35;
  }
  
  if (CheckBox1.rawValue == "1" )
  {
      membershipAmount += 15;
  }
  
  if (CheckBox2.rawValue == "1" )
  {
      var txtAmount = TextField3.rawValue;
      var amt = 0;
      if ( (txtAmount != null ) && (! isNaN(txtAmount) ) )
      {
          amt = parseFloat(txtAmount);
      }
  
      membershipAmount += amt;
  }
  
  this.rawValue = membershipAmount;
  

• Join numeric fields

  I have 3 different numeric fields that represent the branch, account number and the numbers of the audit of a bank account

  I also have a text field which, under a validate event, joined the values of 3 numeric fields (separated by a '-' and a ' / ') by using the following code

  If (BRANCH.rawValue! = null & & ACCNUM.rawValue! = null & & VD.rawValue! = null) {}

  JOINED_FIELD. RawValue = BRANCH.rawValue + "-" + ACCNUM.rawValue + "/" + VD.rawValue;

  }

  If I filled in the fields of digital type with for example

  DIRECTION = 11

  ACCNUM = 222

  VD = 3

  the joined field shows 11 - 222/3

  But if I finish the BRANCH field with 0, I get a JOINED field validation error

  Can someone help me how to avoid the warning message when the selected branch is 0?

  Thanks in advance

  Move your code to the event Calculate of the "JOINED_FIELD" field instead of the Validate event.

  You calculate the value of a text field based on the values of numeric fields 3 actually.

  Thank you

  Srini

• Need to add lines to a dynamic form based on numeric field

  I designed a form based on the example in the book of the use of javascript with addInstance Terry to make a button to add a line in a table.

  Works very well for me, however I am transforming the shape slightly so that instead of allowing the user to click the button Add a line I have them enter a numeric value in a field, then call addInstance to create the correct number of lines. The numeric field is on page 1 of the form and is called NumberStudents and is linked as a Global.  I tried to have him call addInstance to add lines, but can't make it work.  Suggestions appreciated. Thanks newbie.

  The only mistake you made was missing rawValue next to the name of the command "NumberOfCards".

  var i = 0;

  for

  (I have = 2; I<>NumberOfCards.rawValue. i ++) {

  Roster.Page2.StudentSubform.Table1._Row1.addInstance (1);

  XFA. Form.Recalculate (1);

  }

  If your requirement is to add the number of rows based on the value entered in the digital field, so you can by calling the setInstances method. This way you need not looping through the number and use of the addInstance every time.

  Roster.Page2.StudentSubform.Table1.Row1.instanceManager.setInstances (5);

  XFA. Form.Recalculate (1);

  or

  Roster.Page2.StudentSubform.Table1._Row1.setInstances (5);

  XFA. Form.Recalculate (1);

  Thank you

  Srini

• How to divide the two numeric fields?

  Hello.

  I tried to divide two numeric fields, called A and B and put the result in a hidden field called C. I need the value for an XML export.

  My question is; How is it possible to divide A and B? I don't have a problem in multipling other areas, but trying to divide I get at most / overflow error.

  Best regards

  Mathias

  Hello

  During the distribution, please check that the value of the field as the line is not null or zero first. So the event calculate the hidden field would look something like this:

  if (b.rawValue == null || b.rawValue == 0)
  {
       c.rawValue = "0"; // If c is a numeric field. If it is a text field then you could put a message "division by zero"
  }
  else
  {
       c.rawValue = a.rawValue / b.rawValue;
  }
  

  Hope that helps,

  Niall

• Response to a change in a numeric field

  Hello

  I have a question about the digital field. I have the following problem. I have two numeric fields. I am writing a value in a field. Now, a calcualtion gives me a new value with the old value. I would like to print the new value in the second field of nummeric.

  So my problem is this.

  The main program starts when I press a start button. So what I would like to have is the new value printed without pressing the Start button. Basically, I would like to see the solution before starting the program. I enter a value and see the solution, now the solution is not correct, so I change the value and see the new solution. This solution is correct and I start the program. It's save calculation time. Can I change the value and at the same time, according to me, if it is correct to start with the value. (example: first of all the ground 1000 Hz, second field (T = 1/f) 0.01 s).

  I hope you understand what I mean and can someone help me?

  Best regards

  This happens install a callback function in numerical order and the EVENT_COMMIT event management (assuming that the control is left in HOT mode as the default value).

  From the probgram, whatever that means, will be by the callback of a command START button function

• How can I run my validations after confirming that a specific field is not NULL?

  Hello

  How can I run my validations after confirming that a specific field is not NULL?

  One of my validation needs to ensure that a specific page element is not NULL, then I use the option 'required value' of the page element, but it seems that the validation is performed before the option "required value.

  I know I could create 2 different validations for each case, but I think it would be nicer if I could work through the only validation and leave the APEX to manage the field validation is NOT NULL

  Best regards and thanks for reading

  According to my experience, it appears that the APEX is going through all THE postings...

  IE, if a "failure" of Validation continues.

  It's actually beneficial for the end user, because it will get ALL the errors in the form he or she made... not just a first.

  workaround solution:

  1. Remove the 'required' on the element value (.. but keep the "required" model)
  2. Add the NOT NULL check to your personal validation process.

  Very probably, the 2nd one will be in a PL/SQL function return error text.

  MK

• Need to concatenate the put date in the form field and the numeric field

  Hello

  I have a date field and a 4-digit numeric field in my form. I want to concatenate these fields in a new field in the following format: "YYYYMMDD [4-digit numeric field]."

  For example

  Date: June 4, 2015

  Number: 1234

  Concatenated field: 201506041234

  When I try to concatenate the value of date, I get the string value is entered instead of the actual date (e.g. "4 June").

  Thank you.

  OK, the script might like:

  Get the values of field as strings

  var sDate = getField("date1").valueAsString;

  Var Nums = getField("number1").valueAsString;

  Convert string to date in a date object

  Kai var = util.scand ("mm/dd/yyyy", sDate);

  Concatenate number and the date strings

  var sDateNum = util.printd ("YYYYMMDD", letter) + nes;

• Adding a Unique Auto generated a numeric field to a Document

  We plan to use Echosign to send order forms to the customers they sign at the end of the form. When the form is sent to the client, is there a way to add an auto generated numeric field (can be both numbers and letters) that is unique to each time? It must be unique so that there is no duplicate order number.

  It would work the same way for the transaction Echosign number, except that we can label the number that all we want. Even if we could change the field of Transaction number for him give a different label (order number) that would work as well. All thoughts

  Hi Jonathan,.

  services eSign form fields have a random number generator, then your unique reference number will have to come from somewhere else.

  Is it using eSign with integration of Api services any?

  Otherwise, you may use the transaction number stamp, even if you need to add text to the document along the lines

  your reference number is less than the transaction number.

• 'Total' numeric field that summarizes several numeric fields of several pages

  I have a number of fields of digital type I want total upward. I created a numeric field which will be total and need a script that add them up. All the fields that should be added is referred to binding INTVL_n (INTVL_1, INTVL_2, etc.). The fields are also on several pages.

  Thank you!

  You must override the event calculate for the field that you want the value to appear. While the cursor is in the script window, ctrl-click the field you want to summarize. LiveCycle will automatically write the SOM expressions to refer to this area.

• Dynamically update a numeric field as the sum of the values of page element.

  Hello
  
  I am updating a numeric field on a page of the apex by summing the values of several components of the page. I have tried to follow this tutorial http://st-curriculum.oracle.com/obe/db/apex/r40/apexdynactions/apexdynactions_ll.htm, especially the part "create a Set value dynamic Action with the help of PL/SQL'.
  
  In the example of the tutorial, they return a value of page element P3_SAL multiplied by a multiplier determined by the case of another page. What I want to do is much more simple that I just want to add multiple values page element and then display them in a numeric field at the bottom of the page.
  
  so the code I tried to use based on the tutorial is in the tab: Home > Application Builder > Application 103 > Page 3 > Dynamic Action change > create / edit Action
  
  Set type: PL/SQL function body
  
  PL/SQL function body:
  
  BEGIN
  return: P3_ITEM1 + P3_ITEM2 + P3_ITEM3;
  END;
  
  Page items to submit: P3_ITEM1, P3_ITEM2, P3_ITEM3
  
  But it gives me an error that I need to declare identifiers, and yet it works if I use only one article and I can perform arithmetic.
  
  That is to say.
  
  BEGIN
  return: P3_ITEM1 + 1000;
  END;
  
  Any help would be appreciated.

  PL/SQL function body:

  BEGIN
  return: P3_ITEM1 + P3_ITEM2 + P3_ITEM3;
  END;

  Page items to submit: P3_ITEM1, P3_ITEM2, P3_ITEM3

  But it gives me an error that I need to declare identifiers, and yet it works if I use only one article and I can perform arithmetic.

  In your code, it lacks the ":" for articles P3_ITEM2 and P3_ITEM3.
  Try this:

  BEGIN
  return :P3_ITEM1+:P3_ITEM2+:P3_ITEM3;
  END;
  

• How can I add Auto text based on the value in the numeric field?

  Need help... I'm trying to add the auto text to a text based on a value in a numeric field. I want my text fields (summary box) to say 'Success' if (box score) value is equal to 10 and say "is not good" If the value is less than 10. My digital field is calculated by selecting drop-down lists.

  Thanks in advance for your help.

  Ed Watson

  Here is a link to the document that I created...

  https://files.Acrobat.com/?TrackingID=KGLIT#folder/c3106c32-2e69-4a5f-8ef2-94d25623dbfb

  Try this:

  If (NumericField1.rawValue< 10)="">

  TextField1.rawValue = "does not."

  }

  else {}

  TextField1.rawValue = "passed."

  }

• PROBLEM: Text in numeric field

  Hi =)

  .. I'm having a problem with some (not all) of the numeric fields in a form.

  In those troubled I type letters in them. When I leave the field he has displayed an error message and the field is cleaned.

  How can I make the field accepts only numeric characters when typing?

  I do not understand what I changed to make it happen...

  If anyone has an idea, please tell me something.

  Thank you =)

  Usually as long as your TextField is a NumericField Type in field object properties, only the numeric characters can be entered...

  If you can type letters and the type property of the object is still NumericField, you should probably remove the object and re-create...

  In the case otherwise, if the type property of the object is not a NumericField, change it to NumericField...

  If not try changing the validation model of these options is your solution...

  I hope this helps!