Numeric values on tank of money

Similar Questions

• change the color of a function of the numeric value indicator bar

  I'm trying to customize a digital indicator, a bar of tank, to change the color of the bar according to the numerical value.

  I assumed that I could to make it by creating a property node for change FG and BG, connected to two color within a structure of the case box, but when I can function returns an error message.

  does anyone know how to customize?

  You must use the property 'fill color '.

• Is it possible to 'ring' selected numerical values easily to an editable PDF file with Adobe Acrobat?

  Hi guys,.

  I work in the film industry and we are looking to use Adobe Reader to create sheets of digital camera report that will connect the crucial information for the editors/vfx production on a highly publicized movie shooting this year. Usually this is done with sheets of paper carbon-copied, but a new trend is to make digitally in order to facilitate life for everyone.

  One of the things as facts easily on paper is the selected circle takes so the laboratory handling film knows how to treat film: this can save a lot of time and money. Shooting digitally the same thing applies, transcode only you some takes, and it makes it easier for everyone.

  My problem with design sheets is implementing in a pdf editable using popular software, the most popular of them are Adobe Acrobat. A numeric value that represents a number to take will be in a column in the pdf file, and I need a way of circling this value to basically a click of a button or similar. Is this possible to do with Acrobat?

  One of the other things it is easy to do on paper is to draw a distinct line when a roll of camera/memory card is changed, if there is a way to make a line in a table "BOLD" again, the click of a button, which would be extremely useful!

  Thanks guys, I look forward to hearing your suggestions!

  The way to do it using the tools of comments. There is none

  built-in component that can be used to surround an element on the page, but

  There are various ways to select an item (boxes,

  Radio-boutons, drop-down menus, list boxes, etc.).

  Sunday, may 10, 2015 at 2:08, rarth_boddomy, [email protected]>

• Strings, the formula = numeric values?

  is there a way of having a cell to display a string numbers, but when this cell is referenced in a formula it will be used as a numerical value? See screenshot.

  I want the storage capacity label.

  I want the strings displayed in column A to represent numeric values in column B.

  then "128 GB" = 0.13. or "128 GB" = B2. I need a cell to associate it with the value of the other.

  

  My goal is to make a column of pop-ups with storage capacities that can be used in a formula in another table.

  If you choose "128 GB" I want its value to be 0.13

  I prefer to use a table of choice like that.

  

  (1) create a table (as you have) that contains the list of text and the corresponding values

  I named the 'TaillePour Value' table

  In the table where you want to use, use the following formula:

  C2 = SIERREUR (IF (VLOOKUP (B2, TaillePour Value::A:B, 2, 0) = 0, ' ", VLOOKUP (B2, TaillePour Value::A:B, 2, 0))," ")

  It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:

  = SIERREUR (IF (VLOOKUP (B2, TaillePour Value::A:B, 2, 0) = 0, ' ", VLOOKUP (B2, TaillePour Value::A:B, 2, 0))," ")

  Select cell C2, copy

  Select cells C2 at the end of the C column, paste (or as needed)

• Convert a numeric value to text

  First problem-

  Convert a numeric value to text

  Convert currency value in words.

  e.g. Rs. 10, 000 would become rupees ten thousand only

  RS 1,50,749.77 would become rupees one Lakh fifty eight thousand seven hundred forty-nine and seventy seven Paise only.

  Second problem-

  = SIERREUR (IF ($A16 > = $K$ 1, (INDEX (($L$1:$L$40), MATCH ($B16,($H$1:$H$40), 0))), IF ($A16 < = $I$ 1, (INDEX (($J$1:$J$40), MATCH ($B16,($H$1:$H$40), 0))), 0)))

  This formula works in Microsoft excel but displays error while being used in numbers (iwork).

  Number of formula considers only the first part. While giving the equation for the second part it gives the result as FALSE. And when used in number last 0 and support must be removed to get the result. If it is not removed form displays the error message.

  Concerning

  Nishat Gupta

  Hi John,.

  First question needs a lookup table for the translation. I did several years ago for AppleWorks and later Numbers ' 09. Take a look for her tonight.

  I think that neither SGIII nor Wayne Contello done one more early as well. Both were English/North American names and number formats, so a direct copy may not be sufficient.

  Second question:

  A lot of extra parentheses in there! They are not necessary for frame type Beach H1:H40 references. Won't it doesn't work, but they don't add noise when a man tries to ead the formula.

  Here is an example using the addresses in your formula, but omitting the function SIERREUR the part I wanted to see real results, including errors, if any.

  

  The formula below comes from U16. The title of the image is in U17.

  IF ($A16≥$ K$ 1, INDEX ($L$ 1: $21, MATCH($B16,$H$1:$H$21,0) $L), IF ($A16≤$ I$ 1, INDEX ($ 1 $J: $J$ 21, MATCH ($B16, $H$ 1: $H$ 21.0)), 1))

  In the selected cell (U17) tests in two IF statements returns FALSE, then the FALSE result for the second, it is what is returned.

  To add a SIERREUR function:

  SIERREUR = (formula above,0)

  Kind regards

  Barry

• I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  You can use vlookup() like this:

  (1) crate a table like this:

  the first line is a heading row

  the first column contains the same list of items in the context menu

  the second column contains the corresponding values

  name of the table 'value '.

  

  In another table (where the pop-up menu), you can use the table of choice of 'Value' like this:

  

  create a drop-down list in cell B1

  Select cell C1 and type (or copy and paste) the formula:

  = VLOOKUP (B1, Value::A:B, 2, 0)

  short hand for this is:

  C1 = VLOOKUP (B1, Value::A:B, 2, 0)

  now change the pop-up to display the value in the change of cell C1

• How to interpret the numerical values of SQL_ColType()?

  Hello

  After the execution of:
  ..
  Call SQL_Connect("abcDB","user","pw","") ' abcDB is an ODBC link to my Mysql 5 database
  Call SQL_ExecDirect ("SELECT id, temperature, tsdat FROM v$ _header WHERE id")< 1000")="">
  ..

  > the SQL_ColType(1..ColumnNo) variable shows me the data types of each column to a numeric value, for example:

  SQL_ColType (1) = 4
  SQL_ColType (2) = - 9
  SQL_ColType (3) = 93

  What real data types are behind the values? It would be nice to get a complete list of all possible values?

  Thank you.

  Hi ddehn,

  The SQL_... orders () are the old method for DIAdem to connect to SQL databases, using the ODBC approach.  Since the tiara 10.2 the ADO approach is the recommended method.  This is the function that I used to use to make sense of the values SQL_ColType():

  Function GetODBColTypes()
  
    Dim j, jMax, ChTypes
  
    jMax = SQL_ResultCols
  
    < 1="" then="" jmax="">
  
    ReDim ChTypes (jMax)
  
    FOR j = 1 TO jMax
  
      IF SQL_ColType (j) = 93 THEN
  
        ChTypes (j) = "DateTime".
  
      Else if SQL_ColType = - 1 OR SQL_ColType (j) (j) > 8 THEN ' STRING
  
        ChTypes (j) = "String".
  
      ON THE OTHER
  
        ChTypes (j) = 'number '.
  
      END IF ' SQL_ColType (j)
  
    NEXT ' j
  
  GetODBColTypes = ChTypes
  
  End Function ' GetODBColTypes()

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How do switch you between 2 numeric values using a Boolean switch?

  Hello

  I'm a newbie to labview, so it is perhaps easy to answer.

  I would like to perform a calculation which, according to the test unit, will require a different numeric value to use in the Calc.

  I tried to use a Boolean switch to choose which constant must be used during runtime mode as well for example or 0.01 or 0.02 will be selected. The idea is to labview so insert the constant selected in the calculation and spit out the answer.

  There is only one output on the Boolean toggle switch and not of entry so that I can't work out how to do it. If there were 2 inputs and 1 output it would do the job.

  Thank you

  Andy

  Try the joint.  I have provided two methods.

• Boolean functions accepts numeric values...

  Recently I got to know that all Boolean functions both accept numeric values. But what is the purpose of it?

  I found the exit of some random values while entering numerical values of Boolean functions...

  Thank you!!

  Best regards

  Adel SR

  srrashme wrote:

  I'm not clear. Can you please attach an example?

  What you don't understand?

  When the Boolean logic is used on integers, the logic is made on a basis by ILO.  I have to do this all the time to encode and decode data from specific protocols (some more wild than the others).  It is also necessary for many data (such as a CRC or Reed Solomon) controls and for encryption (AES, OF THE, 3DES).

  

• How to connect the value of the input string to numeric values

  Hello

  I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula

  Thanks for any help

  Hello

  It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).

  Look at the VI I enclose.

• Display of numerical values (labels) on the graph

  Hello

  I've searched for a while but cudnt find a solution. I showed a chart on the chart. Now, I want to show the numerical values of the

  table points on the graph so that I don't always have to use a cursor for the XY coordinates while moving on the chart. How can I do?

  Searching on the forum I found, it can be done with waveform graph. We can do with graphics as well? In Microsoft excel, the option is there for that.

  Thanx.

  Here you go, LV (untested) 8.6

• Where can I find the numerical value for GenICam standard pixel formats?

  I am putting in place a structure of case for the reconstruction of image formats using the pixel as IMAQdx output format. Confirmed the consistent property of 'Pixel Format' numeric U32 in id IMAQdx from camera to camera, but it's just a number, and I don't see that the number of image formats used by the cameras I (I need code for other formats I've yet to see). The GenICam standard 1.1 supports 52 image formats, and no doubt IMAQdx has a corresponding U32 value for each format. Where can I find this list? The .pdf for the GenICam standard lists the formats available in name only and does not have a corresponding numerical value.

  Hey Nasgul

  The attribute 'PixelFormat' is actually a list of name/value pairs. For GenICam cameras (such as GigE Vision) these names and these values are determined by the camera, no IMAQdx XML file. The names themselves are normalized by the part of the "Standard feature Naming Convention" of GenICam (but aren't their values).

  I think you speak for the Format of Pixel property node. I think you are right that it is a digital. It's probably because the available modes can not be known before you actually run the code and the LabVIEW enumeration values must be known when editing, no compilation. The node itself as a digital is probably as a relic of the firewire interface. It would be probably more useful as a string, I imagine.

  You probably want to use the generic way of manipulating the attributes instead. You initially set the property 'Attribute Active' in 'PixelFormat' and then you can then query a list of name/value pairs available or simply set the value. IMAQdx allows you to set the value directly as a string (using the standard names) rather than having to translate it into a numeric value.

  Eric

• DAQmx - numeric values read HAVE

  Hello!

  Simple question: is it possible to read directly the discrete values of an analog input channel?

  DBL examples are the result of an acquisition, DAQ AI 'normal '. Actually the card converts the input voltage with a NOC to a numeric value his loss of memory to use DBL for say a 12-bit conversion. I use the following material, but this is expected to be possible for each card:

  OR PCI-6110

  OR PCI-6711

  Best regrads,

  Michael
  

  OK found in VI ".vi DAQmx Read (analog 2D U16 NChan NSamp)". Seems that no one is using it... I have never seen a LabVIEW example with such a simple way to read the ACTUAL data of HAVE.

  Best regards

  Michael

• How to place numerical values on the peak in graphs

  Hello

  Is it possible to put the numerical value on the crest of the wave as in the below image where the yellow dots on the Ridge, we put value digital pic?

  

  It needs a lot of cleanup (and there are probably still have a better way in general), but it should at least help you get started.

  

  I used the Detector.vi Peak, which requires the LV Full Development System.

• How can I get the numeric value of a reference?

  I would like to get the numeric value of a reference.  If I look at any reference with a probe, I can see it has value, i.e. F280006B.  I would like to enter this value in a digital indicator for some troubleshooting I do. but running a Ref directly in a digital indicator introduced the code. Somehow the probe's work, it must be accessible. All advice out there?

  Type caster in U32.

  Lynn