NUMLOCK is ENABLED notification
I have set to be activated at the start lock. This is a notification that I get when I connect to my machine. How can I disable this notification? Link to photo
Hello Tom,
Thank you very much for the detailed information about your question.
By default the NUM LOCK status is the same as it was before you shut down the computer properly. If it is on when you shut it down it will be on when you turn on the computer again.
You can also use the following steps to change the setting:
1. run the registry editor.
2. bring in HKEY_USERS\. Default\Control Panel\Keyboard.
3. change the InitialKeyboardIndicators value to 0 to turn off the NumLock at startup.
You can also check out the following link to learn more about the issue. The quotes from the article on how to activate the Numlock key for the logon screen.
How can I activate the Numlock key for the logon screen?
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
Tags: Windows
Similar Questions
-
HHey guy
I enabled notifications for VIP emails, notifications of wire on my iPhone. But, automatically receive nothing.
I put Fetch manually for my emails. Can I change the settings or how can I make it work? Help, please.
Thank you
SAL
Hey there Ram.
I see your message that you receive any notifications automatically when you search for new e-mail messages while using the option extract manually. The difference between go pick up and pushing the notifications and information/updates on day of account is definitely a balancing act. At one end, you want to save your iOS device's battery, on the other hand, you want to know what you should pay attention to. I had to find the best way to balance those myself, so here's my best information.
Push your data means that each time your information has been updated to include something new, a periodic inspection of the accounts on the device that uses the power of the battery. Fetch means that there is a certain amount of time that your accounts are audited with can help save your battery life. Pick up manually, you are not looking for information updates until this request has been activated as your Mail, Contacts, calendars and other app.
The drillthrough feature has other eligible delays causing your email accounts to check back more often. You can select a time in settings > Mail, Contacts, calendar > extract to one that fits your needs. Your other choice is all hours, every 30 minutes and every 15 minutes. More frequently your accounts are checked means a greater drain on your battery life. I recommend you to choose the longest period of time and see if you get your notifications as often as you want.
Happy emails for you!
-
I run Windows 7 on my computer dell laptop and I was wondering how to activate screen caps and numlock notifications. Also for the control of the volume, brightness and other similar things. I had them on before, but for some reason, they aren't the most. Help, please. Thank you.
Hello
1. did you of recent changes to the computer before the show?
2 do you have uninstalled all the programs?
Check if the problem persists in the new user account.
I suggest you follow these steps.
1: Look at the taskbar and see if you have the Quickset icon there. It is in the form of a Q that is blue with a yellow tail coming out there.
2: click the icon and uncheck the 'disable on screen volume meter.' (On some versions you must right-click it.)
3: If the icon is missing under start programs and see if you have the Dell Quickset program. Follow the arrow to the word "Quickset" and click on it once and the 'Q' icon should appear on the taskbar.
4: If you do not have quick setting program you can download it from the website of the computer manufacturer (dell).
If the problem persists, contact the computer manufacturer for help.
-
How do I enable notification by email to OIM 11 g
Hello
I currently work in an environment of stock 11.1.1.3.0 and try to activate e-mail notifications when a user requests to be placed in service in the AD.
The default approver is Xelsysadm, and I put my e-mail address in the location of this account. However, I am not getting any emails during the application process.
How to activate email must be sent to the approvers?
Thank you!Try below
1. set the value of the property system RequestNotificationLevel = 1 (1 = enabled, 0 = disabled) bydefault is 0
2. create a name resource "Mail server" and type "Mail Server" must be configured to send notifications
3 details of the server (IP address will be enough) on resourceThere is the "Demand Creation" default query template that will trigger in this scenario.
to configure the custom notification model, and details follow the links below
http://docs.Oracle.com/CD/E28389_01/doc.1111/e14308/notification.htm-nayan
-
How to enable notification of change of value with DSC for several variables
Hello
I would like to request a notification with DSC for two shared variables value saved for change events. In the example attached, it is no problem to do it for only a variable. But I have no idea how to do to achieve for that variable.
Any ideas?
Matthias
Hi Matthias,
You can implement it as you can see in the attached example.
Best regards
Mencef -
Cannot enable Notification reason: 0xC004F063.
Separated from this thread.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - GK4PY - FDWYH-7TP9F
The Windows Product Key hash: u3xU6PnmumgYLgUpnmbqEw9Q2OA =
Windows product ID: 00371-OEM-8992671-00004
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {B4759F21-7F88-43E9-90D4-92DDD2C29566} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150316 - 1654
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{B4759F21-7F88-43E9-90D4-92DDD2C29566} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-7TP9F 00371-OEM-8992671-00004 2 S-1-5-21-1797848217-370323411-1050795854 Gateway SJV50MV Phoenix Technologies LTD. V1.31 20091224000000.000000 + 000784F3E07018400F8 0409 0409 Time(GMT-05:00) Standard is 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00178-926-700004-02-1033-7601.0000-1312015
Installation ID: 002692012431888234241475600706120866478133727121672253
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 7TP9F
License status: Notification
Notification reason: 0xC004F063.
Remaining Windows rearm count: 4
Trust time: 12/05/2015-07:30:05Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C533
Beyond: 0 x 0000000000000000
Event timestamp: 5:11:2015 23:20
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: NAAAAAEAAgABAAIAAQABAAAAAwABAAEAeqj8JILDen9U4NguUCE + UsSWEoqIMqzY + o5Gyg isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTOT: Notification reason: 0xC004F063.
Acer owns gateway, then try it if it is available:
Click Start, right click on computer
Click on properties
Scroll down to the Windows Activation
Click on the link 'change product key '.
Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.
COA certificate of authenticity:
http://www.Microsoft.com/howtotell/content.aspx?PG=COA
??
What is the certificate of authenticity for Windows?
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
-
How do I enable Notification - Sync with mobile Lightroom-
So with the last update of Lightroom CC, whenever I have a folder 'in sync' with mobile LR, lightroom will take the relay my mouse and show me where is the sync tab and tell me the synchronization is paused. I do not know that they have added it after 1 million people have asked their tech support about this, but you should be able to cut the notification. Help, please. It's driving me crazy.
Hi Enginyr,
Could you please check the current status of synchronization on LR?
Send us the report of 'diagnostic' of Lr mobile,
- Tap and hold the top left icon LR in the mobility of Lightroom settings.
- After that, LR mobile generates a diagnostic log and it will open in your email client.
Kind regards
Assani
-
How do I enable notification ' Num/Caps/Scroll Lock?
Hello
I just built my computer from scratch and I could be missing some programs.
Is there a way to allow on the indicators of the screen for caps, scroll, num locks?I'm on windows 7 ultimate 64 bit and I use a keyboard of Logitech k260.
Thank you
Take a look at this - http://download.cnet.com/TrayStatus/3000-2094_4-75167720.html t - it do what you want?
I don't know if its 64 bit and 32 bit, so check first if it does not have what you want.
EDIT - more details here http://www.binaryfortress.com/TrayStatus/ it seems that it is OK on 64 institutions.
-
Notifications of voids in iOS10
Hello!
I seem to have a problem with the light ' white' or 'empty' notifications at the top of my screen. I have used iPhones for a while, but have never seen that happen before until my iPhone with iOS10 7. A gray box appears at the top, as if there should be a message or notification, but there is nothing there. I saw my wife 6 on iOS9 iPhone once before and I thought it was weird. Most of my review is set to "banner" and I just tried to disable and re-enable notifications, but it continues to happen. Things like messages come out very well, so I don't know if everyone has faced the front. Google does not seem to pull up great results for me.
This isn't an empty notification. This is a feature called accessibility that allows to reach the top of your screen with one hand and is accessible by double clicking the home button. If you keep it doing so accidentally, and do not want to use this feature, you can disable it by going to settings > general > accessibility > scroll down and disable "accessibility".
-
How to turn the notifications in settings webmail xfinity?
Windows 7, Xfinity.net webmail. Email notification has stopped working after it updated for Firefox 36.0.1. The red numbers that appear when new email has arrived no longer use FireFox. I manually check now. When I open Internet Explorer email notification works as before (very good). How can I enable notification back on, red number so when the email arrives I will be informed without having to manually check from time to time.
Blacklion, looks like you are using a toolbar that alerts you when you have a new email. Please consider reinstalling the toolbar to deliver notifications. Or if it's for a specific site, check the notifications for the site permissions:
Right-click on the page and click on 'View Page Info' in the opening menu. This opens a window with a "Permissions" tab I have this, scroll down to everything down until you see "View Notifications" that entry from the third to the last. Restore the default value, either just select "Block".
-
Motorola,
Can you please enable notification played in MOTO X PLAY in your next update (Marshmallow) of?
She is given, but there is no use of it. -
How to turn off the NumLock key?
Yes, I googled this! I spent two hours Googling that!
I followed the instructions on editing my registry and changing the settings of the BIOS. I came to the conclusion that these solutions don't change the start-up for Num Lock. But I want the Num Lock is completely disabled. When I press NumLock I won't do anything! I don't want the 6 on the num pad button at the right point... I don't want the rocker!
What should I do?
Hi neverendingnoise,
You might have tried it before, but here's how to disable it through the registry:- Click Start, click run, and type regedit to open the Windows Registry Editor.
- In the registry, open the sub folders.
HKEY_CURRENT_USER\
Control Panel\
Keyboard\ - In the case of keyboard, you should have a string value named "InitialKeyboardIndicators" to a value of 0, 1, or 2. Here is the explanation of each of these values.
0 = NUMLOCK is turned off after the opening of the session.
1 = disable caps lock.
2 = NUMLOCK is enabled after logon.
-
Automatically turn off notifications in night mode
I just started using the SmartBand and I think it's great and especially function where you can take the SmartBand notify you of incoming e-mails etc but I have a problem/question.
Is any way to have the SmartBand stop notify/buzzer indicating new emails etc when it is in night mode? Normally, I keep my phone in silent mode don't wake etc. received e-mails while you sleep at night, but I noticed that even if I have the laptop (a Sony Xperia Z2) silent vibrating SmartBand guard repeatedly wake up.
Of course I could manually set SmartBand OFF notifications whenever I have go sleep and then re-enable notifications in the morning but would be nice if this can be automated, and to be honest I find it a bit weird why this isn't the default behavior because that love to be woken up in the middle of the night as soon as you receive an email etc...
Many thanks in advance,
Richard
Thanks for your reply, but as I said in my first post I know that I can do it this way but I prefer having automated and fact is after doing a few tests now have the SmartBand in night mode, it is not vibrate even if I checked the notification option is great.
Don't know why it did not work last night but the only thing I can think is that it was not in night mode, well I thought it was.
-
Walkman not shown in the notification bar, while playing
Hey...
I own a M Xperia with Android 4.3.
Last couple of days, the walkman is not on my notification bar and the drop all playing in the background, as it was before...
I tried force stopping the app and restart the phone several times, I've even installed the latest update, but no luck.
Any ideas?
(I prefer do not return to the factory version and then return to the update, because I'll lose all the changes of names I've done & playlists..)Go to settings > apps > find Walkman > make sure that you have enabled notifications see the
-
No notification of ink - PhotoSmart 7520
I recently bought a PhotoSmart 7520, installed the software on my computer which uses Windows Vista and connected by WiFi. Everything works fine, but the black ink ran out today and I had not received low ink message. I have previously had a PhotoSmart printer older and always had warnings of low ink before he missed. I looked for a setting to enable notifications in case they broadcast in some way off the coast, but could not find one. Any ideas?
Hi @RickDiamond,
Welcome to the HP Forums!
I see that you do not get notifications of low ink with your HP Photosmart 7520 and I am happy to help you!
Please try to open the solution Center HP (HP printer on your desktop icon), click on your level of ink at the top of the screen. Then select Advanced settings, here you can choose either to display the ink immediately or only when printing alerts.
If those who have been unchecked, this would explain why you do not have the notifications.
I hope this helps and thanks for posting!
Maybe you are looking for
-
Why is info on a deleted iphone when that data is deleted in icloud?
If something like my music, is transferred to icloud, then removed from icloud, music is also deleted from my iphone. Why?
-
Easy way to locate the function used on the diagram by name?
Is there an easy way to locate the functions used in the diagram under the name of the generic function? I have user appears somewhat to the user on my diagram functions to help me debug a difficult sequence of agross events live multiple now that it
-
I'm looking for STE in operating system.
Hello How can I get the ETS? can I have a free version or a trial? Kind regards!
-
I lost all the contents of my files when I moved a folder to a new folder.
I lost all the contents of my files when I moved a folder named my file which was a lot of archive folders inside subfolders to another folder named Folder1 My, who was not in the archive folders... I have a copy of my portable hard drive on a hard
-
HPOfficejet Pro 8600: Printing problems
I can't use my printer as I have a print job that I can't remove. It says "delete", but in fact it does not. How can I get rid of this print job so that my other requests for printing can go forward? Thanks for your help.