NVIDIA help services version 187,66 error messages

Similar Questions

• NVIDIA Driver Helper Service, Version 186.44 stopped working and was closed, where do I go to update this driver?

  NVIDIA Driver Helper Service, Version 186.44 stopped working and was closed, where do I go to update this driver?

  If your PC has a graphics update card driver nvidea come from Nvidea site webhttp://www.nvidia.co.uk/page/home.html

  If you have a laptop your laptop manufacturers site

• Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Current solution: download IE8 for XP, run who, follow the Setup Wizard, wait for his failure. Download manually upgrade restart, recommended.

  Restart the installation of IE8, wait that he remove previous IE. Reset.

  Installation of IE8 restart to restart. Let it run. May need to restart.

  Try to run windows update again. IF it works, woot, otherwise download the SP3 of XP service pack from Microsoft. As the Windows update fails, you must not download an installer, but an ISO standard. Burn the ISO to a CD and install (way to go...) or download a free tool like 7Zip and unpack iso and install a go from there.

  From there on, the installation of SP3 and hope this works...

• Help! I get this error message in Premiere Pro 4

  Help! I get this error message in Premiere Pro 4

  [/belding/mediaCore/MediaLayer/AudioSupport/Make/Mac.../.../src/Mac/CoreAudioHost.ccp-1623

  Anyone know what this means?

  I use an IMac very new and running the latest os from apple

  Thank you

  meet probably here

  http://forums.Adobe.com/message/1826019

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.

• The account specified for this service is different from the account specified for other services: this is the error message

  No matter what I try, I get this error message on all the options of the system.  I can not even do a backup or restore.  How can I fix this problem.

  I suppect is something that my grandson caused when he was on the computer, the last weekend, but I can't find what has been done.  I was desperate enough to try a restore, but I'm not even allowed to do.    I still have the same password, so signing was not a problem.  Most of the applications currently running is not a problem, but I'm not allowed to do all the maintenance or system functions.  Help.

  Hello BeHibbetts,

  Can we get this error at startup?

  If so, we can tighten down that service gives error help minimum troubleshooting the boot.

  For Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  For Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• I need help with a 1706.Does error message, someone knows how to solve this problem without cost me?

  Someone will help me fjnd out what to do and how to fix it. My problem is when I try to install anything, I get an error message 1706.  can anyone help me solve this problem without cost me fifty dollars or more

  See:

  You receive an "error 1706. Setup cannot find the required files...

• Help. I get this error message.

  I get this error message [below]
  There is an error on line 38, 162 [absolute position 1788] column "D:/Musica Union/modeles/mu-template.dwt of site": nested editable regions
  I'm not an expert in DW & I get my butt kicked [here is the code.
  Thank you.
  
  

  Thank you, but I think that I thought about it.

• BlackBerry smartphones HELP! BlackBerry Torch 9810 error messages. How can I fix it

  Hello. Would be very grateful for help. I brought a new Blackberry 9810 but at first, I was unable to make a Blackberry ID. I've sorted this problem by buying a new sim card, but after that, I was unable to download the Blackberry App store. Since then, I took the phone to a local repair shop, who restarted the OS software, however still unable to download the App store.

  Since this fact I now some more different two errors appear. One is when I go to 'Create' in the main menu an error appears: "error starting net_rim_bb_toolkit: Module 'net_rim_bbid_common' not found ' I can't make regarding my BBID. Help?

  The second is when I click on 'Blackberry Protect' again on the main menu, this message appears: "error starting net_rim_bb_dryad_gui: Module 'net_rim_bbid_api' not found.» New HELP?

  I was really excited to try a Blackberry phone, switch from an Iphone, however at the moment just upset im and want my Iphone, without the flaws in return. I HOPE SOMEONE CAN HELP ME PLEASE!

  First of all, you need to reinstall the operating system.  I don't know what the people at phone repair shop, but you should not get these errors.

  1. I recommend the 7.1 OS from here: choose the model 9810 and the 7.1.0.658 version and download it.

  https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=9FC664916BCE863561527F06A96F...

  2. If you have data on the device you want to keep then make a manual backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. You can get the BlackBerry Desktop Software here http://us.blackberry.com/apps-software/desktop/

  3. download the OS from step 1 of the file on the PC then install on the PC by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml." Also, check the following locations for the vendor.xml file and delete all instances of the file:

  On Windows Vista/7, go to C:\Users\YOUR_USER\AppData\Roaming\Research in XML Motion\BlackBerry\Loader (where 'YOUR_USER' is your user name)

  On Windows XP, go to C:\Documents and Settings\YOUR_USER\Application is In Motion\BlackBerry\Loader XML (where 'YOUR_USER' is your user name)

  5. Please a clean OS Reload and use BBSAK from BBSAK.org and wipe the device (after doing a full backup) then after you get the 507 error (no OS installed) then go to the next step.

  6. plug the BlackBerry and double-click on "Loader.exe." It is located in c:\program files\common research in motion\apploader

  This will reinstall the latest OS on your device.  Once this is done, you will need to make sure that you have a BlackBerry BIS data plan on your account.  Contact O2 to ensure that it is put into service.

• Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

  As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Newer version already installed error message when you try to install acrobat reader

  When you try to download acrobat reader 10.0 that it gives me the error "New version already installed" I'm not there that in the list of installed programs. so that I can uninstall it. JavaScript is also enabled in my browser. Please help in how to proceed.

  Hi bond_007,

  Cleaning of Acrobat Reader Download Adobe Reader and Acrobat tool - Adobe Labs tool to uninstall the application.

  Then try to download the Acrobat Reader software from here: http://get.adobe.com/reader/enterprise/

  Let me know if it solves your problem.

  Kind regards

  Meenakshi

• Need your help with the following 3 error messages that now appear on my PDF document.

  Hi all

  I worked on a PDF document to the University for the past 4 months. Its a PDF which I was informed as I go along and recording with no problems.

  Today however I try to open it to work and that's what I get now...

  "This document enabled features extended in Adobe Reader." The document has been changed since its creation and use of the extended functionality is no longer available. For the original version of this document, contact the author'

  "There is an error on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem.

  «The font 'GTAJBY + Bliss-Regular' contains a bad /BBbox.»

  It has never done this before, and even when I tried to open my backup file it did the same.

  Can someone help me please? I have so much work that is potentially lost on this...

  (Also, I'm not a large part of the head of the computer, so please keep in simple terms)

  Thanks in advance everyone...

  Great thanks for your help...

  Some "experts".

• If please help me solve a 400 error message that I receive for a site I've visited several times and is accessible via the Safari browser.

  I am an owner fitbit and downloaded their app on my macbook pro several weeks ago. I have consulted this app to review the progress of fitbit several times a day since. Today, I can't do that. I can not even access the Fitbit site. I get an error 400 - your browser sent an invalid request.

  I cannot access any other internet content through firefox.

  I can access my account and the Fitbit site via Safari. I can also access the Fitbit site and my account via my iphone. The problem seems to be something specific between my firefox and Fitbit.

  Thanks for your help.

  It seems that sometimes, cookies and cache files can be damaged (they not be saved correctly). Why does that happen? I don't really know. I don't know there are several reasons for this. If we could, we could stop him from past ever. Because we cannot do this, we have just this way again.

• Need help to work around the error message: Houston-27101: attempt to access an entity died in OT.

  Hello world

  My logic in prepareForDML() updates some attributes (shown in the excerpt below) based on the question whether an insert or an update is in progress. But, when I delete a line, I get the following error: Houston-27101: attempt to access an entity died in OT. So far, I have not been able to catch this error.

  
  

          if (operation == DML_INSERT) {
              setLineId((new SequenceImpl("eo_s",
                                          getDBTransaction()).getSequenceNumber()));
              setCreatedBy(createdBy);
              setCreationDate(currentDateAndTime);
              setLastUpdatedBy(lastUpdatedBy);
              setLastUpdateDate(currentDateAndTime);
          } else if (operation == DML_UPDATE) {
              setLastUpdatedBy(lastUpdatedBy);
              setLastUpdateDate(currentDateAndTime);
          }
  

  Any advice would be appreciated. Thank you!

  James

  You can turn on debugging of BC4J with :-Djbo .debugoutput = console (ADF & amp;) WebLogic how to: activate on your ADF Application Diagnostic Messages)

  Debug log will probably contain information about the columns that cause this error (you will probably see something like: "compare entity failed to attribute...").

  And what about new info provided in your last post:

  If OS is based on db, you can expect problems with line lock (because EO use internal methods doSelect() and lock() and db views cannot be locked)

  Also, check if you have set the primary key on your entity object columns.

  Dario

  Post edited by: kdario