No sound on Slate 8 Pro

Similar Questions

• I NEED A SOUND CARD FOR MAC PRO 3.1

  I NEED A SOUND CARD FOR MAC PRO 3.1

  For what purpose?

  Entry?

  Output?

  Maybe this will nelp

  http://eShop.MacSales.com/shop/audio/interfaces

• Question about sound card on Satellite Pro L40

  Hello

  I use a program called Sibelius and recommended an ASIO compatible sound card.
  Can someone tell me if the sound in the satellite pro L40 series card is compatible ASIO?
  If not I can plug a card external sound which is compatible and if so how can I turn off the internal sound card.

  Thank you

  I really don't think not someone will be able to give you information about the ASIO compatibility, but I see no problem, that is if you want to use the external device. Card internal sound, you can disable it in Device Manager.

• 3110CT no sound after installing XP Pro

  I am a novice when it comes to laptops, so here's the problem: my 3110 ct no sound after installing XP Pro. Had no noise when I bought it with another operating system, the report says no audio devices installed.

  Does this mean that I have to make a chip for laptop or a driver, I need & where can I find the driver or the part for this.

  Help, please.

  Usually, if the audio driver is not installed you will get no sound, but also a yellow exclamation point must appear in Device Manager.

  If the sound card chip is damage, I imagine that you will not be able to see the yellow exclamation point belonging to the sound card in Device Manager.

  You bought this Portege as a second hand unit. Am I wrong?
  So maybe the sound card is faulty.

  The computer uses an ES1978 ESS (Maestro-2E) and sound chip ES1918.
  Check if you can find an audio driver XP in internet.

• How to view all programs currently running on Slate 21 pro

  I have a slate 21 pro and cannot find a way to display all programs running at the same time, so I can stop or select one.

  Every other Tablet android or phone I used has a way to do it.

  Bill

  COWA wrote:
  

  Hi Bill,

  Here is a link that explains how to use HP double Viewer App to interact with and manage your currently running applications.

  If you prefer to use the standard method of Android, this page also provides information about how disable HP double Viewer App in settings, that will return you to the standard experience.

  http://support.HP.com/in-en/document/c04476282

  Kind regards

  COWA

  HP employee

  Unfortunately, this link is dead.

• HP Slate 21 Pro fails to wake up from its sleep

  Hello

  I had this problem and since I have my 21 Pro slate.  The device will sometimes fail to wake from sleep mode Android or HDMI / PC mode.  This happens when touching the screen to wake you up and when you press the power button to wake.  The power button to become white, but the screen remains blank.

  The only thing I found to resolve so far, it is to pull the power plug and start the unit up.

  Anyone else having this problem?

  The update of KitKat was finally released the HP officially.  It is implemented slowly but if you want just now follow these steps below. It should solve some problems.

  Now my 21 slate is the progress update to 4.4.2 try this step
  
  1 factory reset your slate 21 pro
  2. wait until it has finished
  3. After restart it, set up your slate 21
  4 put to update all your application on google game store
  5. wait util finished all updates
  6. open Configuration and update your slate 21 (it will be very long)
  7. now my 21 tab is updated... If all goes well there is no problem until it ends the 4.4.2 update
  
  Hope it can help you get 4.4.2 os.
  Kind regards.

• How to connect an external monitor to the hp slate 21 pro

  I have a HP Slate 21 Pro. Anyone know how I can connect an external monitor to reflect what's on my tab

  Hello

  There is no way to connect an external cable monitor such that HDMI port is entered only.

  Your only solution would be to use the wireless display option in the settings, but you would need a monitor/TV/adapter that would work as a Miracast receiver.  I'm not sure specific screens that function as receptors, but I used adapters are the PTV3000 Netgear and Actiontec SBWD100A01,.

  I hope this helps.

  Kind regards

  COWA

• Slate 8 Pro guard blocking turned off during playback

  My HP (slate 8 - Pro) table that keeps blocking off after a few minutes even if sleep is set to 30 minutes. After a few minutes it just close the page and goes back to the home screen.  Received from the centre of Service of Calexico in lieu of my original Tablet.  I get no error message before he stops and outside apps have not made any changes. Any ideas what the problem might be?

  Hey @gsparky ,

  Welcome to the HP Forums!

  I understand that your Tablet HP Slate Pro 8 is automatically shut down.

  Can you please clarify if the slate is to be completely turned off (to hold the power button to wake it up) or if the application closes (taking you to the home screen)?

  That you happens to all applications or is it only in a particular application?

  Try to clear the cache on the Tablet, there may be damage to the data stored in one of the applications or OS causing accidents. To do this, go to settings > storage > cached data. Touch it should give you the option to clear all the cache.

  Please clarify the question or let me know if that helps.

• With the help of several sound devices in XP Pro

  How can I assign multiple applications on multiple sound devices in XP Pro?  I have a Plantronics Bluetooth headset I want my Avaya IP Softphone to use, but I want all the other sounds being carried towards the sound of the laptop system.

  Mike J

  Jerry (& Divya)

  Thanks to each of you for your comments; I was able to configure my devices according to the needs.

  You should be able to use two sound devices.  With a little trial and error, I was able to configure my applications using sound as I would like.

  First, I open sounds and Audio devices in Control Panel.  From there I click on the Hardware tab, high-lighted one of my sound devices and selected properties, selected the tab properties, on the next screen, exploded devices Audio, top-lit audio device, selected properties one last time and checked the Do not map through this box of the device.  By clicking on OK or apply will inform you that the changes will not take effect until your next restart of Windows.  OK, that box, OK the Properties tab and select the Audio tab.  On the bottom of drop for sound playback and sound recording choose the audio device for this feature.  Make sure the down - use only default devices - check box IS NOT CHECKED.  In the voice tab, do the same (no checkbox here, however).  OK on the sound and Audio Devices Properties sheet, reboot and you should be good to go.

  Kind regards

  Mike J.

  Mike J

• battery life was very short on Slate 8 pro

  The battery on my slate 8 Pro drains 20-30% every 12 hours, even when it is not used.  I thought maybe it was due to some applications that I had loaded, so I factory reset it and I loaded only the builtin Mail (check schedule) and a couple of new apps.  When I left the House this morning, this is 95%, when I got home tonight, it's 65 percent.  Under the battery, it will appear at the top and then WiFi.  I have a good wifi signal throughout.

  Other than the most minimal config, this is a stock version - characterizes this type of performance?  Another my tablet is an older iPad, so I'm surprised that it far surpasses this slate on battery.

  Thanks for all tips/tricks you may have on how to draw towards the bottom.

  -J

  Just to follow up - I reset and only set up the email.  So far so good - I estimate draining the battery is less than 5% per day at rest.

  Another thing I did was to remove from the case (not HP) - I kept seeing light so that in the case.  I wonder if the magnets are not quite right and the table kept thinking that opened the lid.

• HP slate pro 21: HP Slate 21 Pro

  How can I connect my hp 21 pro tab in my computer hp laptop pavilion dv5 to use micorsoft office word or excel, or another Web site that are not of the capabilities of a mobile phone or Tablet not in the manual...

  This is an announcement for the HP Slate 21 Pro.  In the section titled 'be productive on the field and in the cloud', the last paragraph tells you about the connection of your slate on a Windows PC using HDMI.  However, it does not you can use the PC to your slate.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite A100 - no sound with Windows XP Pro SP3

  Hello

  I'm the reconstruction of a laptop Toshiba A100-PSAA9A-10U038 with a new installation of Windows XP Pro SP3.

  At this point, I have not all sounds (Yes, the volume is set to the top).

  As this is my first post I covered I hope that most of the bases as with SP3 and I installed all the updates available from Toshiba and Microsoft - well at least, I guess I have. I downloaded the latest updates from Realtek who advised in a general forum but no luck.

  Device Manager tells me that there are problems with a "PCI Device" and a "unknown device", and I assume that one of these two is the culprit.

  Any suggestions would be much appreciated.

  Hi mate

  I think that you have installed the driver of his evil.
  See this page:
  http://www.MyToshiba.com.au/support/notebooks/satellite/A100/psaa9a-10u038/download?OS=22

  you will find all of the Win XP drivers for this model of laptop.
  As you can see there are two different Realtek drivers:
  V Realtek Audio Driver 5.10.0.5253
  -Realtek ALC861 Audio Driver 5.10.0.5200

  To my knowledge, you have the Realtek HD audio Manager.
  But before install you the audio driver SP3 must be installed, it seems, that you did
  However, the most recent audio Realtek driver can be downloaded from the Realtek page directly.
  Select this check box, and then choose Manager Realtek HD audio for Win XP.

  Should work.

• No Sound/Volume in Satellite Pro C650

  I have satellite pro c650 and suddenly there is no sound I can hear. I tried external speakers, but there is no sound at all.

  The operating system is Windows XP and I couldn't see the volume control. I went to control panel > sound and audio devices > volume, but everything is gray.

  Could someone please help.

  What is with the sound card?
  Can you please check in Device Manager and report it here?

• Alarms have no sound on my iPad Pro for iOS 9.3

  I use a little timers to remind me when I do the tea. Since 9.3, however, they are not a noise, Siri, with reminders app or the clock app.

  The system volume is enough all the way, and my iPad Pro is powered.

  I can open clock, set a timer for 2 min the sound up and 'Presto' under the timer. It counts down, but when it's done, there is no noise or the notification if the application is in the foreground or stayed at another same app that happens if I set an alarm.

  In settings, I checked do not disturb is turned off. I also checked the status bar at the bottom of the screen, and the Moon do not disturb is not on.

  I checked the parameters of Notifications, and badges, sounds and alerts are enabled for reminders. There is no notification of the application of the clock setting.

  In sound settings, I checked the ringer and alerts sound slider is turned upward. I have sounds attached to each of the options sounds. Sounds of lock and click on keyboard are turned on, and they work.

  I tried to turn off my iPad Pro, wait a few minutes, then turning back, but still no sound from the alarm.

  See if your "do not disturb" setting is enabled. If you see a moon in your upper right corner, it's on. Turn it off through your bar of tasks or in the settings in the main menu on the left.

• Lack of Win98SE PCI/Sound driver for Satellite Pro 4270

  Hello

  I have an old Satellite Pro 4270 with Win98SE license.
  I have no driver CD and only a Win98SE installation CD. So I installed Win98SE.
  From Toshiba Web site show me a lot of drivers for Win98SE which I installed.

  But I have not found a driver for the PCI card that has a yellow "?" in the Device Manager. I do not mean the PCMCIA slots.

  I installed the driver of his Yamaha DS - XG, but I can not here any sound.

  So where can I find the PCI driver and sound driver better.

  John

  Great! :)

  Thank you for your comments.