Similar Questions

• Is the case of NVIDIA QUADRO 2200 to work with Illustrator, Indesign, Photoshop...?

  Is the case of NVIDIA QUADRO 2200 to work with Illustrator, Indesign, Photoshop...?

  My computer is Windows 7 x 64

  Thank you!

  Hello

  Please refer to the system requirements | Adobe Creative Cloud

  Concerning

  Kuldeep Kandpal

• East-nvidia gtx 860 m compatible with illustrator CC?

  I'm going to buy laptop with nvidia gtx 860 m and I need to know
  Is compatible with the CC-860 m-Nvidia GTX Illustrator?

  var_px,

  NVIDIA GTX 860 m is not among the compatible graphics cards for the moment. Please see the link below for the full set of compatible graphics cards:

  System requirements | Adobe Illustrator

  Thank you

  OM

• My nvidia geforce 6200 is compatible with Windows 7?

  Hello

  I am considering upgrading my PC from XP to win 7 but can't understand if my card is compatible. It is nvidia geforce 6200 the. Can someone tell me, in other words, if it's compatible Please?

  Thank you

  EM

  If the driver is already on the machine and you do an upgrade you won't have a problem.  However, if you do a fresh install, then that is a good question.   In general, I need to download the driver of nvidia geforce from nvidia site (or of the drive by the manufacturer if save you those) and reinstall the driver after the installation.   I don't know why it seems to be shifting for the nvidia driver, but this isn't a great thing.

  To update level or fresh install.

  Then go to the internet and search for the download of the driver...  For corresponds to the best use of the name of your board when you are looking for... for example my ASUS Board is an M4A785-M so I search google with information thus: "drivers m4a785-m."

  The second from the top which brings me to this address: (note that this is an asus dot com, which indicates that it is not a phishing site)

  http://support.ASUS.com/download.aspx?SLanguage=en&p=1&m=M4A785-M&hashedid=ef0qgvMIwOUagAVl

  I download and install the driver nvidia using the Manager of devices (from Control Panel)

  Access graphics, software update driver cards and then navigate to the folder where you have already downloaded and expanded the drivers from nVidia.

  The machine should reboot and come back with higher resolutions, you expect to do with the nVidia Driver.

• NVIDIA Quadro M2000M not compatible w After Effects?

  I tried to get the best performance settings on my new laptop Lenovo P50 of workstation. Starting to wonder if this laptop is a little ahead of the curve.

  I was surprised that preferences settings show the optional/premium video card offering in this incompatible machine. I updated the driver, but that's what it shows:

  

  The other surprise is that the port of Thunderbolt3 is not in the drop-down list with the miniDP port, but rather through port USB Type C... which, at the moment there is practically no hard drives that I can connect to with Thunderbolt... and the USB Type C TB3 to TB adapters will be unavailable for at least a few weeks.

  Any advice or info on the graphics card problem would be appreciated.

  Thank you!

  In its State current AE does not use the GPU to speed up everything except the user interface. In many systems of things were better if you disable acceleration in preferences.

  There are some plug-ins third parties who rely on the GPU to accelerate their effects, but the CUDA driver has absolutely no effect on these plug-ins. It has always been like that. NVIDIA has completely changed the direction they were going anyway so I wouldn't count on the further development exclusively made with CUDA acceleration.

  If all goes well, in the AE very close future will make better use of the GPU, but for now don't worry about this.

• NVIDIA Quadro K5200 not recognized!

  Probably a stupid question, but: I just moved from a position with a Nvidia Quadro K5000 to one with a Nvidia Quadro K5200.  I brought over several open projects, and when I open one of them, I get the message "this project last used with Mercury Playback Engine acceleration GPU (CUDA), which is not available on this system."  Mercury Playback Engine Software only will be used. "And when I go to project > settings > general, which is actually my only choice.  This is also true if I start a new project.  Device Manager confirms that the system recognizes the K5200, and for the evaluation of the graphics capabilities of the computer, the score is through the roof.   I don't remember having to do something special to have Premiere Pro recognized the K5000 on the old machine, it seemed just to be done automatically without having to install drivers, etc..  Is there something else I'm supposed to do to make this work?

  Running Premiere Pro CS6 with Windows 10.

  Never mind.  Found the hack on adding to cuda_supported_cards.txt.  I guess CS6 is not updated more supported cards, should have known that.

• Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  jasonf18090788 wrote:

  I saw on the Adobe site that the video card is compatible with AE Pr, but not work.

  Where have you seen that? It is not on the list of the AE: system requirements | After Effects

  Keep in mind that After Effects uses only the GPU for one, outdated thing. GPU very little matter for AE. See this: features GPU (CUDA, OpenGL) After Effects CS6 and after effects CC

• Upgrade HP 8570w with NVIDIA Quadro K2100M

  Hi, I have a HP 8570w and recently I bought a NVIDIA Quadro K2100M (N15P-Q3-A1).

  I installed the graphics card in my HP 8570w but the screen is not working, it stays black.
  I reinstalled the original video card K1000M and everything works fine, so I don't know if the new K2100M graphics card is broken or if I have to do something to make it work (for example to update or change the configuration of the bios).
  I have the latest version of the Bios (version F.43 68IAV 08/10/2013), what I have to do?
  Kind regards.

  The ebay seller told me that he starts flashing the video bios of the K2100M with a compatible vbios HP to solve the problem of incompatibility.

  I will inform you if this solution won't work...

• Problems with the Precision M4400 and the graphic card Nvidia quadro 770M

  I have a problem with my Precision M4400 and Nvidia Quadro 770 M. After I installed Windows 7 64 bit, I have problems with the graphics card. I get a blue screen or graphic errors. I tried several versions of the driver. In the Nvidia forum had this problem even more. Here, they told me that only a BIOS update for the graphics card to solve the problem. Update the BIOS, but I should refer by DELL. So my question is this problem with Dell is also known, and there is already an update of the BIOS to the Quadro 770 M?

  Hi all

  I have the solution by chance. I was looking for the latest drivers GeForce for Windows 7 x 64 and I read the accompanying note: http://fr.download.nvidia.com/Windows/337.88/337.88-win8-win7-notebook-release-notes.pdf
  On page 17, you can read the following note to fix: "[GeForce FX 770 M] [portable]: blocking of the blue screen occurs after Windows starts."
  
  Of course, GeForce FX 770 M does not exist (and never was), and it should be Quadro FX 770 M. I can bet that nVidia has corrected this famous BSOD problem in the wrong driver because always there is nothing about any "Quadro FX 770 M - fix" in the note accompanying the latest Quadro (340.52) driver.

  You try the GeForce driver above, but to install it, you may need to download an INF file modified with the addition of the ID of Quadro FX 770 M (= "NVIDIA_DEV.065C ="NVIDIA Quadro FX 770 M"). Try without the first modified INF file because the Quadro FX 770 M is listed as a compatible chip in the version of the driver GeForce 337.88 note...

  I'll try that, even though I am completely sastified with the latest driver for Quadro (feasible) (285.62) without disable Powermizer. I did not try the latest Quadro drivers again (to be honest).

  Late me know please.

• Engine Mercury works only with NVidia Quadro cards?

  Fellow Forum members,

  Prices for NVidia Quadro cards are INCREDIBLY expensive. Finally, I checked the prices were as shown below:

  Quadro 6000 = $4,000

  Quadro 5000 = $1,800

  Quadro 4000 = $1,000

  My question to someone there is '' done the Mercury Motors CS5 for After Effects and Premiere Pro exclusively work onlly with Nvidia Quadro series cards? ''

  If the answer to my question is NO, then I would that this thread can be dedicated to the sharing of alternative solutions for graphics cards that will not burst his portfolio.

  My motherboard supports technology ATI CrossFireX Quad, 3 - Way CrossFireX and CrossFireX and NVIDIA Quad SLI, 3 - Way SLI, and SLI technology.

  My way of thinking, that's if I could use two or three ATI cards bridged together to match 80% of the performance of Quadro 6000 at a fraction of the cost, I'd be happy.  However, the bump in the road is if the motor Mercury of CS5 is compatible with bridged ATI graphics cards together?  Motor Mercury of CS5 cares what type of graphics resident cards into the motherboard in order to deliver 100% of the performance?   Any information will be greatly appreciated. Thank you.

  Hello

  In addition, CS5 does not use SLI technology

  It uses only 1 graphics card

  This thread explains some good stuff

  http://forums.Adobe.com/message/2791699

  information seems accurate

  hope this helps

  j

• HP Pavilion TV 8070a Media: Nvidia geforce 7500, is not compatible with windows 10

  When you try to upgrade to Windows 10 and after preliminary analysis of my system by the Win 10 app, I get a Win 10 error message and can not run the Win 10 update.

  "Nvidia geforce 7500 the, the manufacturer of the screen did not your screen compatible with windows 10.

  I search the Web for solutions but can not find free driver updates.

  I followed your suggestion with a slight variation, and I am now under Win 10.

  Before you start, I did a complete picture of the system and backup using my existing Win 7 and created a repair of the system / boot drive.

  My steps were:

  1. download Win 10 from the Microsoft site on a USB key.

  2. I tried to start on the key and do not far in the Win 10 installation routine, when I received a message to restart Windows 7 normally and start the installation of Win 10 since the key.

  3. after a while win 10 started but the screen was skewed and none of the options/settings display gives a suitable display. So you don't have to try to correct the display settings.

  4 followed the link for the driver NVIDIA 7500LE W7 32 bit and downloaded the win 7 - 309.08 and installed it.

  5. it resulted in a first-class screen display using the default size of 100% and its good even at 125% (editable via the Advanced display settings.

  So everything is good and I thank you all for your help.

  PS I did a complete system and docs backup Image and also created a repair of the Win 7 System / Boot disk before you start the above, just in case things went wrong.

• Workstation XW4300: xw4300 will not work with the recommended graphics card (Nvidia Quadro FX 3400)

  I installed a graphics card hoping to update my computer.  The Nvidia Quadro FX 3400 was the highest assigned

  graphics card recommended for the workstation xw4300 system HP specifications page.  My system

  has a 460W power supply and I connected the cable 6-pin on the map and the map pins in the PCIe x 16 slot where

  the old card was.

  When I turned on the machine, I don't have even get a bios message or welcome screen.  All black.  But on all 10

  seconds, the power would cycle off and then come back.  HP says that this map is supposed to work with my machine!

  This card appears, making it non-functional.

  Any ideas?

  I ended up going with the Nvidia Quadro FX 1400 card.  He is listed as 75W and the map of 'medium' recommended for this xw4300 system.  I paid 10 dollars for it on eBay and it works great.  Do not use the Quadro FX 3400 map even if it is recommended by HP for this machine.  Food can't support.

  A witch hunt.  Equipment old and new software don't always play nice.  My machine has a new installation of Windows 7 Pro 64 bit on it, and running Windows Experience Index gives me the blue screen of death.  I put a meter on the power during the test problems... No..  It's a kind of driver incompatibility.  Win 7 says that the driver is the last, but he chokes on the

  test the index.  Funny irony is that I ran other tests which include benchmarking 3D rendering and nothing, but the Microsoft Windows Experience Index test stifles this card.  How about you do not run the Microsoft test to improve my Windows experience.  :/  Go figure.

  This card is older hardware, and because of that I don't have hope than Nvidia or Microsoft to make Windows experience test runs correctly with win7 64 OS.  Sounds like HP.

  Here's the kudo: the guy on eBay who I bought the card quickly refunded my money when he learned about the Blue error screen of death in Windows performance index test, so I did a free card.  I'll send her money

  Back to him.  I've never met anyone so accommodating.  These companies could take a lesson from that on what customer service means.  That's how you get regular customers.

• Is Asunflower® ASUS NVidia GeForce 9650 M GT 1 GB MXM II card compatible with my Macbook Pro 17 "(early 2009)?

  Is the

  Asunflower® ASUS NVidia GeForce 9650 M GT 1 GB MXM II card

  compatible with my Macbook Pro 17 "(early 2009)?

  the hole Monte, placement of chip, the size and shape are similar to the Nvidia GeForce 9600 M GT, 512 MB, which I have installed but IS compatible. More is better.

  Thank you.

  You may turn your perfect condition MacBook Pro 17 in a non-working relic. For what?

  If you need an expandable system, buy a Mac Pro Silver Tower, 2009 or later.

• ProLiant ml350 g6 is compatible with Nvidia tesla K40?

  Hello, I got a HP Proliant ML350 G6. Can someone tell me that my computer is compatible with Nvidia tesla K40? Thanks in advance

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - section ML servers...

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VbD0ypXbK9I

• Z840: Nvidia Quadro K5000 with HP Z840

  I recently bought a new HP Z840.  I tried my card Nvidia Quadro K5000 istalling, but it doesn't recognize it.  I have only a single CPU system. DO I need something type a kit, or I have it installed in the slot evil or something. Can someone please.  Thank you.

  GPU = 2 x NEW Nvidia Quadro K5000 (tryingt to istall). Can sell these 2cards to get the latest Nvidia Quadro M6000. Anyone interested let me know, I'll sell every K5000 for only $1,000 each.

  Hey guys, I found what was wrong. Initially, I uninstalled the drivers for the original Nvidia Quadro with purchase, so I got the game of mind that the drivers were already installed and I forgot to install the latest drivers. So it is now resolved!  A simple gross error on my part with the bad state of mind do not check the simple things.  Thank you very much for your help.